[megadrive.git] / teensy3 / usb_desc.h

/* Teensyduino Core Library
 * http://www.pjrc.com/teensy/
 * Copyright (c) 2013 PJRC.COM, LLC.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * 1. The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * 2. If the Software is incorporated into a build system that allows
 * selection among a list of target devices, then similar target
 * devices manufactured by PJRC.COM must be included in the list of
 * target devices and selectable in the same manner.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#ifndef _usb_desc_h_
#define _usb_desc_h_

#if F_CPU >= 20000000

// This header is NOT meant to be included when compiling
// user sketches in Arduino.  The low-level functions
// provided by usb_dev.c are meant to be called only by
// code which provides higher-level interfaces to the user.

#include <stdint.h>
#include <stddef.h>

#define ENDPOINT_UNUSED			0x00
#define ENDPOINT_TRANSIMIT_ONLY		0x15
#define ENDPOINT_RECEIVE_ONLY		0x19
#define ENDPOINT_TRANSMIT_AND_RECEIVE	0x1D

/*
To modify a USB Type to have different interfaces, start in this
file.  Delete the XYZ_INTERFACE lines for any interfaces you
wish to remove, and copy them from another USB Type for any you
want to add.

Give each interface a unique number, and edit NUM_INTERFACE to
reflect the number of interfaces.

Within each interface, make sure it uses a unique set of endpoints.
Edit NUM_ENDPOINTS to be at least the largest endpoint number used.
Then edit the ENDPOINT*_CONFIG lines so each endpoint is configured
the proper way (transmit, receive, or both).

The CONFIG_DESC_SIZE and any XYZ_DESC_OFFSET numbers must be
edited to the correct sizes.  See usb_desc.c for the giant array
of bytes.  Someday these may be done automatically..... (but how?)

If you are using existing interfaces, the code in each file should
automatically adapt to the changes you specify.  If you need to
create a new type of interface, you'll need to write the code which
sends and receives packets, and presents an API to the user.

Finally, edit usb_inst.cpp, which creats instances of the C++
objects for each combination.

Some operating systems, especially Windows, may cache USB device
info.  Changes to the device name may not update on the same
computer unless the vendor or product ID numbers change, or the
"bcdDevice" revision code is increased.

If these instructions are missing steps or could be improved, please
let me know?  http://forum.pjrc.com/forums/4-Suggestions-amp-Bug-Reports
*/


#if defined(USB_SERIAL)
  #define VENDOR_ID		0x16C0
  #define PRODUCT_ID		0x0483
  #define DEVICE_CLASS		2	// 2 = Communication Class
  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
  #define MANUFACTURER_NAME_LEN	11
  #define PRODUCT_NAME		{'U','S','B',' ','S','e','r','i','a','l'}
  #define PRODUCT_NAME_LEN	10
  #define EP0_SIZE		64
  #define NUM_ENDPOINTS		4
  #define NUM_USB_BUFFERS	12
  #define NUM_INTERFACE		2
  #define CDC_STATUS_INTERFACE	0
  #define CDC_DATA_INTERFACE	1
  #define CDC_ACM_ENDPOINT	2
  #define CDC_RX_ENDPOINT       3
  #define CDC_TX_ENDPOINT       4
  #define CDC_ACM_SIZE          16
  #define CDC_RX_SIZE           64
  #define CDC_TX_SIZE           64
  #define CONFIG_DESC_SIZE	(9+9+5+5+4+5+7+9+7+7)
  #define ENDPOINT2_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT3_CONFIG	ENDPOINT_RECEIVE_ONLY
  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSIMIT_ONLY

#elif defined(USB_HID)
  #define VENDOR_ID		0x16C0
  #define PRODUCT_ID		0x0482
  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
  #define MANUFACTURER_NAME_LEN	11
  #define PRODUCT_NAME		{'K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
  #define PRODUCT_NAME_LEN	23
  #define EP0_SIZE		64
  #define NUM_ENDPOINTS         5
  #define NUM_USB_BUFFERS	24
  #define NUM_INTERFACE		4
  #define SEREMU_INTERFACE      2	// Serial emulation
  #define SEREMU_TX_ENDPOINT    1
  #define SEREMU_TX_SIZE        64
  #define SEREMU_TX_INTERVAL    1
  #define SEREMU_RX_ENDPOINT    2
  #define SEREMU_RX_SIZE        32
  #define SEREMU_RX_INTERVAL    2
  #define KEYBOARD_INTERFACE    0	// Keyboard
  #define KEYBOARD_ENDPOINT     3
  #define KEYBOARD_SIZE         8
  #define KEYBOARD_INTERVAL     1
  #define MOUSE_INTERFACE       1	// Mouse
  #define MOUSE_ENDPOINT        5
  #define MOUSE_SIZE            8
  #define MOUSE_INTERVAL        1
  #define JOYSTICK_INTERFACE    3	// Joystick
  #define JOYSTICK_ENDPOINT     4
  #define JOYSTICK_SIZE         16
  #define JOYSTICK_INTERVAL     2
  #define KEYBOARD_DESC_OFFSET	(9 + 9)
  #define MOUSE_DESC_OFFSET	(9 + 9+9+7 + 9)
  #define SEREMU_DESC_OFFSET	(9 + 9+9+7 + 9+9+7 + 9)
  #define JOYSTICK_DESC_OFFSET	(9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9)
  #define CONFIG_DESC_SIZE	(9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9+9+7)
  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSIMIT_ONLY

#elif defined(USB_SERIAL_HID)
  #define VENDOR_ID		0x16C0
  #define PRODUCT_ID		0x0487
  #define DEVICE_CLASS		0xEF
  #define DEVICE_SUBCLASS	0x02
  #define DEVICE_PROTOCOL	0x01
  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
  #define MANUFACTURER_NAME_LEN	11
  #define PRODUCT_NAME		{'S','e','r','i','a','l','/','K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
  #define PRODUCT_NAME_LEN	30
  #define EP0_SIZE		64
  #define NUM_ENDPOINTS		6
  #define NUM_USB_BUFFERS	30
  #define NUM_INTERFACE		5
  #define CDC_IAD_DESCRIPTOR	1
  #define CDC_STATUS_INTERFACE	0
  #define CDC_DATA_INTERFACE	1	// Serial
  #define CDC_ACM_ENDPOINT	2
  #define CDC_RX_ENDPOINT       3
  #define CDC_TX_ENDPOINT       4
  #define CDC_ACM_SIZE          16
  #define CDC_RX_SIZE           64
  #define CDC_TX_SIZE           64
  #define KEYBOARD_INTERFACE    2	// Keyboard
  #define KEYBOARD_ENDPOINT     1
  #define KEYBOARD_SIZE         8
  #define KEYBOARD_INTERVAL     1
  #define MOUSE_INTERFACE       3	// Mouse
  #define MOUSE_ENDPOINT        5
  #define MOUSE_SIZE            8
  #define MOUSE_INTERVAL        2
  #define JOYSTICK_INTERFACE    4	// Joystick
  #define JOYSTICK_ENDPOINT     6
  #define JOYSTICK_SIZE         16
  #define JOYSTICK_INTERVAL     1
  #define KEYBOARD_DESC_OFFSET	(9+8 + 9+5+5+4+5+7+9+7+7 + 9)
  #define MOUSE_DESC_OFFSET	(9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)
  #define JOYSTICK_DESC_OFFSET	(9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9)
  #define CONFIG_DESC_SIZE	(9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9+9+7)
  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT2_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT3_CONFIG	ENDPOINT_RECEIVE_ONLY
  #define ENDPOINT4_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT5_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT6_CONFIG	ENDPOINT_TRANSIMIT_ONLY

#elif defined(USB_MIDI)
  #define VENDOR_ID		0x16C0
  #define PRODUCT_ID		0x0485
  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
  #define MANUFACTURER_NAME_LEN	11
  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','M','I','D','I'}
  #define PRODUCT_NAME_LEN	11
  #define EP0_SIZE		64
  #define NUM_ENDPOINTS         4
  #define NUM_USB_BUFFERS	16
  #define NUM_INTERFACE		2
  #define SEREMU_INTERFACE      1	// Serial emulation
  #define SEREMU_TX_ENDPOINT    1
  #define SEREMU_TX_SIZE        64
  #define SEREMU_TX_INTERVAL    1
  #define SEREMU_RX_ENDPOINT    2
  #define SEREMU_RX_SIZE        32
  #define SEREMU_RX_INTERVAL    2
  #define MIDI_INTERFACE        0	// MIDI
  #define MIDI_TX_ENDPOINT      3
  #define MIDI_TX_SIZE          64
  #define MIDI_RX_ENDPOINT      4
  #define MIDI_RX_SIZE          64
  #define SEREMU_DESC_OFFSET	(9 + 9+7+6+6+9+9+9+5+9+5 + 9)
  #define CONFIG_DESC_SIZE	(9 + 9+7+6+6+9+9+9+5+9+5 + 9+9+7+7)
  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY

#elif defined(USB_RAWHID)
  #define VENDOR_ID		0x16C0
  #define PRODUCT_ID		0x0486
  #define RAWHID_USAGE_PAGE	0xFFAB  // recommended: 0xFF00 to 0xFFFF
  #define RAWHID_USAGE		0x0200  // recommended: 0x0100 to 0xFFFF
  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
  #define MANUFACTURER_NAME_LEN	11
  #define PRODUCT_NAME		{'T','e','e','n','s','y','d','u','i','n','o',' ','R','a','w','H','I','D'}
  #define PRODUCT_NAME_LEN	18
  #define EP0_SIZE		64
  #define NUM_ENDPOINTS         6
  #define NUM_USB_BUFFERS	12
  #define NUM_INTERFACE		2
  #define RAWHID_INTERFACE      0	// RawHID
  #define RAWHID_TX_ENDPOINT    3
  #define RAWHID_TX_SIZE        64
  #define RAWHID_TX_INTERVAL    1
  #define RAWHID_RX_ENDPOINT    4
  #define RAWHID_RX_SIZE        64
  #define RAWHID_RX_INTERVAL    1
  #define SEREMU_INTERFACE      1	// Serial emulation
  #define SEREMU_TX_ENDPOINT    1
  #define SEREMU_TX_SIZE        64
  #define SEREMU_TX_INTERVAL    1
  #define SEREMU_RX_ENDPOINT    2
  #define SEREMU_RX_SIZE        32
  #define SEREMU_RX_INTERVAL    2
  #define RAWHID_DESC_OFFSET	(9 + 9)
  #define SEREMU_DESC_OFFSET	(9 + 9+9+7+7 + 9)
  #define CONFIG_DESC_SIZE	(9 + 9+9+7+7 + 9+9+7+7)
  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY

#elif defined(USB_FLIGHTSIM)
  #define VENDOR_ID		0x16C0
  #define PRODUCT_ID		0x0488
  #define MANUFACTURER_NAME	{'T','e','e','n','s','y','d','u','i','n','o'}
  #define MANUFACTURER_NAME_LEN	11
  #define PRODUCT_NAME		{'T','e','e','n','s','y',' ','F','l','i','g','h','t',' ','S','i','m',' ','C','o','n','t','r','o','l','s'}
  #define PRODUCT_NAME_LEN	26
  #define EP0_SIZE		64
  #define NUM_ENDPOINTS         4
  #define NUM_USB_BUFFERS	20
  #define NUM_INTERFACE		2
  #define FLIGHTSIM_INTERFACE	0	// Flight Sim Control
  #define FLIGHTSIM_TX_ENDPOINT	3
  #define FLIGHTSIM_TX_SIZE	64
  #define FLIGHTSIM_TX_INTERVAL	1
  #define FLIGHTSIM_RX_ENDPOINT	4
  #define FLIGHTSIM_RX_SIZE	64
  #define FLIGHTSIM_RX_INTERVAL	1
  #define SEREMU_INTERFACE      1	// Serial emulation
  #define SEREMU_TX_ENDPOINT    1
  #define SEREMU_TX_SIZE        64
  #define SEREMU_TX_INTERVAL    1
  #define SEREMU_RX_ENDPOINT    2
  #define SEREMU_RX_SIZE        32
  #define SEREMU_RX_INTERVAL    2
  #define FLIGHTSIM_DESC_OFFSET	(9 + 9)
  #define SEREMU_DESC_OFFSET	(9 + 9+9+7+7 + 9)
  #define CONFIG_DESC_SIZE	(9 + 9+9+7+7 + 9+9+7+7)
  #define ENDPOINT1_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT2_CONFIG	ENDPOINT_RECEIVE_ONLY
  #define ENDPOINT3_CONFIG	ENDPOINT_TRANSIMIT_ONLY
  #define ENDPOINT4_CONFIG	ENDPOINT_RECEIVE_ONLY

#endif

#ifdef NUM_ENDPOINTS
// NUM_ENDPOINTS = number of non-zero endpoints (0 to 15)
extern const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS];

typedef struct {
	uint16_t	wValue;
	uint16_t	wIndex;
	const uint8_t	*addr;
	uint16_t	length;
} usb_descriptor_list_t;

extern const usb_descriptor_list_t usb_descriptor_list[];
#endif // NUM_ENDPOINTS

#endif // F_CPU >= 20 MHz

#endif
Commit	Line	Data
35f00b6c	1	/* Teensyduino Core Library
	2	* http://www.pjrc.com/teensy/
	3	* Copyright (c) 2013 PJRC.COM, LLC.
	4	*
	5	* Permission is hereby granted, free of charge, to any person obtaining
	6	* a copy of this software and associated documentation files (the
	7	* "Software"), to deal in the Software without restriction, including
	8	* without limitation the rights to use, copy, modify, merge, publish,
	9	* distribute, sublicense, and/or sell copies of the Software, and to
	10	* permit persons to whom the Software is furnished to do so, subject to
	11	* the following conditions:
	12	*
a773ac06	13	* 1. The above copyright notice and this permission notice shall be
35f00b6c	14	* included in all copies or substantial portions of the Software.
35f00b6c	15	*
a773ac06	16	* 2. If the Software is incorporated into a build system that allows
35f00b6c	17	* selection among a list of target devices, then similar target
	18	* devices manufactured by PJRC.COM must be included in the list of
	19	* target devices and selectable in the same manner.
	20	*
	21	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	22	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
	23	* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	24	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
	25	* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
	26	* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
	27	* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
	28	* SOFTWARE.
	29	*/
	30
	31	#ifndef _usb_desc_h_
	32	#define _usb_desc_h_
	33
a773ac06	34	#if F_CPU >= 20000000
a773ac06	35
35f00b6c	36	// This header is NOT meant to be included when compiling
	37	// user sketches in Arduino. The low-level functions
	38	// provided by usb_dev.c are meant to be called only by
	39	// code which provides higher-level interfaces to the user.
	40
	41	#include <stdint.h>
	42	#include <stddef.h>
	43
	44	#define ENDPOINT_UNUSED 0x00
	45	#define ENDPOINT_TRANSIMIT_ONLY 0x15
	46	#define ENDPOINT_RECEIVE_ONLY 0x19
	47	#define ENDPOINT_TRANSMIT_AND_RECEIVE 0x1D
	48
	49	/*
	50	To modify a USB Type to have different interfaces, start in this
	51	file. Delete the XYZ_INTERFACE lines for any interfaces you
	52	wish to remove, and copy them from another USB Type for any you
	53	want to add.
	54
	55	Give each interface a unique number, and edit NUM_INTERFACE to
	56	reflect the number of interfaces.
	57
	58	Within each interface, make sure it uses a unique set of endpoints.
	59	Edit NUM_ENDPOINTS to be at least the largest endpoint number used.
	60	Then edit the ENDPOINT*_CONFIG lines so each endpoint is configured
	61	the proper way (transmit, receive, or both).
	62
	63	The CONFIG_DESC_SIZE and any XYZ_DESC_OFFSET numbers must be
	64	edited to the correct sizes. See usb_desc.c for the giant array
	65	of bytes. Someday these may be done automatically..... (but how?)
	66
	67	If you are using existing interfaces, the code in each file should
	68	automatically adapt to the changes you specify. If you need to
	69	create a new type of interface, you'll need to write the code which
	70	sends and receives packets, and presents an API to the user.
	71
	72	Finally, edit usb_inst.cpp, which creats instances of the C++
	73	objects for each combination.
	74
	75	Some operating systems, especially Windows, may cache USB device
	76	info. Changes to the device name may not update on the same
	77	computer unless the vendor or product ID numbers change, or the
	78	"bcdDevice" revision code is increased.
	79
	80	If these instructions are missing steps or could be improved, please
	81	let me know? http://forum.pjrc.com/forums/4-Suggestions-amp-Bug-Reports
	82	*/
	83
	84
	85
	86	#if defined(USB_SERIAL)
	87	#define VENDOR_ID 0x16C0
	88	#define PRODUCT_ID 0x0483
	89	#define DEVICE_CLASS 2 // 2 = Communication Class
	90	#define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
	91	#define MANUFACTURER_NAME_LEN 11
	92	#define PRODUCT_NAME {'U','S','B',' ','S','e','r','i','a','l'}
	93	#define PRODUCT_NAME_LEN 10
	94	#define EP0_SIZE 64
	95	#define NUM_ENDPOINTS 4
	96	#define NUM_USB_BUFFERS 12
	97	#define NUM_INTERFACE 2
	98	#define CDC_STATUS_INTERFACE 0
	99	#define CDC_DATA_INTERFACE 1
100	#define CDC_ACM_ENDPOINT 2
101	#define CDC_RX_ENDPOINT 3
102	#define CDC_TX_ENDPOINT 4
103	#define CDC_ACM_SIZE 16
104	#define CDC_RX_SIZE 64
105	#define CDC_TX_SIZE 64
106	#define CONFIG_DESC_SIZE (9+9+5+5+4+5+7+9+7+7)
107	#define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
108	#define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY
109	#define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
110
111	#elif defined(USB_HID)
112	#define VENDOR_ID 0x16C0
113	#define PRODUCT_ID 0x0482
114	#define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
115	#define MANUFACTURER_NAME_LEN 11
116	#define PRODUCT_NAME {'K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
117	#define PRODUCT_NAME_LEN 23
118	#define EP0_SIZE 64
119	#define NUM_ENDPOINTS 5
120	#define NUM_USB_BUFFERS 24
121	#define NUM_INTERFACE 4
122	#define SEREMU_INTERFACE 2 // Serial emulation
123	#define SEREMU_TX_ENDPOINT 1
124	#define SEREMU_TX_SIZE 64
125	#define SEREMU_TX_INTERVAL 1
126	#define SEREMU_RX_ENDPOINT 2
127	#define SEREMU_RX_SIZE 32
128	#define SEREMU_RX_INTERVAL 2
129	#define KEYBOARD_INTERFACE 0 // Keyboard
130	#define KEYBOARD_ENDPOINT 3
131	#define KEYBOARD_SIZE 8
132	#define KEYBOARD_INTERVAL 1
133	#define MOUSE_INTERFACE 1 // Mouse
134	#define MOUSE_ENDPOINT 5
135	#define MOUSE_SIZE 8
136	#define MOUSE_INTERVAL 1
137	#define JOYSTICK_INTERFACE 3 // Joystick
138	#define JOYSTICK_ENDPOINT 4
139	#define JOYSTICK_SIZE 16
140	#define JOYSTICK_INTERVAL 2
141	#define KEYBOARD_DESC_OFFSET (9 + 9)
142	#define MOUSE_DESC_OFFSET (9 + 9+9+7 + 9)
143	#define SEREMU_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 9)
144	#define JOYSTICK_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9)
145	#define CONFIG_DESC_SIZE (9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9+9+7)
146	#define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
147	#define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
148	#define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
149	#define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
150	#define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
151
152	#elif defined(USB_SERIAL_HID)
153	#define VENDOR_ID 0x16C0
154	#define PRODUCT_ID 0x0487
155	#define DEVICE_CLASS 0xEF
156	#define DEVICE_SUBCLASS 0x02
157	#define DEVICE_PROTOCOL 0x01
158	#define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
159	#define MANUFACTURER_NAME_LEN 11
160	#define PRODUCT_NAME {'S','e','r','i','a','l','/','K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
161	#define PRODUCT_NAME_LEN 30
162	#define EP0_SIZE 64
163	#define NUM_ENDPOINTS 6
164	#define NUM_USB_BUFFERS 30
165	#define NUM_INTERFACE 5
166	#define CDC_IAD_DESCRIPTOR 1
167	#define CDC_STATUS_INTERFACE 0
168	#define CDC_DATA_INTERFACE 1 // Serial
169	#define CDC_ACM_ENDPOINT 2
170	#define CDC_RX_ENDPOINT 3
171	#define CDC_TX_ENDPOINT 4
172	#define CDC_ACM_SIZE 16
173	#define CDC_RX_SIZE 64
174	#define CDC_TX_SIZE 64
175	#define KEYBOARD_INTERFACE 2 // Keyboard
176	#define KEYBOARD_ENDPOINT 1
177	#define KEYBOARD_SIZE 8
178	#define KEYBOARD_INTERVAL 1
179	#define MOUSE_INTERFACE 3 // Mouse
180	#define MOUSE_ENDPOINT 5
181	#define MOUSE_SIZE 8
182	#define MOUSE_INTERVAL 2
183	#define JOYSTICK_INTERFACE 4 // Joystick
184	#define JOYSTICK_ENDPOINT 6
185	#define JOYSTICK_SIZE 16
186	#define JOYSTICK_INTERVAL 1
187	#define KEYBOARD_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9)
188	#define MOUSE_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)
189	#define JOYSTICK_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9)
190	#define CONFIG_DESC_SIZE (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9+9+7)
191	#define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
192	#define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
193	#define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY
194	#define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
195	#define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
196	#define ENDPOINT6_CONFIG ENDPOINT_TRANSIMIT_ONLY
197
198	#elif defined(USB_MIDI)
199	#define VENDOR_ID 0x16C0
200	#define PRODUCT_ID 0x0485
201	#define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
202	#define MANUFACTURER_NAME_LEN 11
203	#define PRODUCT_NAME {'T','e','e','n','s','y',' ','M','I','D','I'}
204	#define PRODUCT_NAME_LEN 11
205	#define EP0_SIZE 64
206	#define NUM_ENDPOINTS 4
207	#define NUM_USB_BUFFERS 16
208	#define NUM_INTERFACE 2
209	#define SEREMU_INTERFACE 1 // Serial emulation
210	#define SEREMU_TX_ENDPOINT 1
211	#define SEREMU_TX_SIZE 64
212	#define SEREMU_TX_INTERVAL 1
213	#define SEREMU_RX_ENDPOINT 2
214	#define SEREMU_RX_SIZE 32
215	#define SEREMU_RX_INTERVAL 2
216	#define MIDI_INTERFACE 0 // MIDI
217	#define MIDI_TX_ENDPOINT 3
218	#define MIDI_TX_SIZE 64
219	#define MIDI_RX_ENDPOINT 4
220	#define MIDI_RX_SIZE 64
221	#define SEREMU_DESC_OFFSET (9 + 9+7+6+6+9+9+9+5+9+5 + 9)
222	#define CONFIG_DESC_SIZE (9 + 9+7+6+6+9+9+9+5+9+5 + 9+9+7+7)
223	#define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
224	#define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
225	#define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
226	#define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
227
228	#elif defined(USB_RAWHID)
229	#define VENDOR_ID 0x16C0
230	#define PRODUCT_ID 0x0486
231	#define RAWHID_USAGE_PAGE 0xFFAB // recommended: 0xFF00 to 0xFFFF
232	#define RAWHID_USAGE 0x0200 // recommended: 0x0100 to 0xFFFF
233	#define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
234	#define MANUFACTURER_NAME_LEN 11
235	#define PRODUCT_NAME {'T','e','e','n','s','y','d','u','i','n','o',' ','R','a','w','H','I','D'}
236	#define PRODUCT_NAME_LEN 18
237	#define EP0_SIZE 64
238	#define NUM_ENDPOINTS 6
239	#define NUM_USB_BUFFERS 12
240	#define NUM_INTERFACE 2
241	#define RAWHID_INTERFACE 0 // RawHID
242	#define RAWHID_TX_ENDPOINT 3
243	#define RAWHID_TX_SIZE 64
244	#define RAWHID_TX_INTERVAL 1
245	#define RAWHID_RX_ENDPOINT 4
246	#define RAWHID_RX_SIZE 64
247	#define RAWHID_RX_INTERVAL 1
248	#define SEREMU_INTERFACE 1 // Serial emulation
249	#define SEREMU_TX_ENDPOINT 1
250	#define SEREMU_TX_SIZE 64
251	#define SEREMU_TX_INTERVAL 1
252	#define SEREMU_RX_ENDPOINT 2
253	#define SEREMU_RX_SIZE 32
254	#define SEREMU_RX_INTERVAL 2
255	#define RAWHID_DESC_OFFSET (9 + 9)
256	#define SEREMU_DESC_OFFSET (9 + 9+9+7+7 + 9)
257	#define CONFIG_DESC_SIZE (9 + 9+9+7+7 + 9+9+7+7)
258	#define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
259	#define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
260	#define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
261	#define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
262
263	#elif defined(USB_FLIGHTSIM)
264	#define VENDOR_ID 0x16C0
265	#define PRODUCT_ID 0x0488
266	#define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
267	#define MANUFACTURER_NAME_LEN 11
268	#define PRODUCT_NAME {'T','e','e','n','s','y',' ','F','l','i','g','h','t',' ','S','i','m',' ','C','o','n','t','r','o','l','s'}
269	#define PRODUCT_NAME_LEN 26
270	#define EP0_SIZE 64
271	#define NUM_ENDPOINTS 4
272	#define NUM_USB_BUFFERS 20
273	#define NUM_INTERFACE 2
274	#define FLIGHTSIM_INTERFACE 0 // Flight Sim Control
275	#define FLIGHTSIM_TX_ENDPOINT 3
276	#define FLIGHTSIM_TX_SIZE 64
277	#define FLIGHTSIM_TX_INTERVAL 1
278	#define FLIGHTSIM_RX_ENDPOINT 4
279	#define FLIGHTSIM_RX_SIZE 64
280	#define FLIGHTSIM_RX_INTERVAL 1
281	#define SEREMU_INTERFACE 1 // Serial emulation
282	#define SEREMU_TX_ENDPOINT 1
283	#define SEREMU_TX_SIZE 64
284	#define SEREMU_TX_INTERVAL 1
285	#define SEREMU_RX_ENDPOINT 2
286	#define SEREMU_RX_SIZE 32
287	#define SEREMU_RX_INTERVAL 2
288	#define FLIGHTSIM_DESC_OFFSET (9 + 9)
289	#define SEREMU_DESC_OFFSET (9 + 9+9+7+7 + 9)
290	#define CONFIG_DESC_SIZE (9 + 9+9+7+7 + 9+9+7+7)
291	#define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
292	#define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
293	#define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
294	#define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
295
296	#endif
297
a773ac06	298	#ifdef NUM_ENDPOINTS
35f00b6c	299	// NUM_ENDPOINTS = number of non-zero endpoints (0 to 15)
	300	extern const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS];
	301
	302	typedef struct {
	303	uint16_t wValue;
	304	uint16_t wIndex;
	305	const uint8_t *addr;
	306	uint16_t length;
	307	} usb_descriptor_list_t;
	308
	309	extern const usb_descriptor_list_t usb_descriptor_list[];
a773ac06	310	#endif // NUM_ENDPOINTS
35f00b6c	311
a773ac06	312	#endif // F_CPU >= 20 MHz
35f00b6c	313
35f00b6c	314	#endif