1 // This is part of Pico Library
\r
3 // (c) Copyright 2004 Dave, All rights reserved.
\r
4 // (c) Copyright 2006 notaz, All rights reserved.
\r
5 // Free for non-commercial use.
\r
7 // For commercial use, separate licencing terms must be obtained.
\r
10 #include "PicoInt.h"
\r
11 #include "sound/ym2612.h"
\r
15 int PicoOpt=0; // disable everything by default
\r
16 int PicoSkipFrame=0; // skip rendering frame?
\r
17 int PicoRegionOverride = 0; // override the region detection 0: Auto, 1: Japan NTSC, 2: Japan PAL, 4: US, 8: Europe
\r
18 int PicoAutoRgnOrder = 0;
\r
19 int emustatus = 0; // rapid_ym2612, multi_ym_updates
\r
20 void (*PicoWriteSound)(int len) = 0; // called once per frame at the best time to send sound buffer (PsndOut) to hardware
\r
22 struct PicoSRAM SRam = {0,};
\r
23 int z80startCycle, z80stopCycle; // in 68k cycles
\r
24 int PicoPad[2]; // Joypads, format is SACB RLDU
\r
25 int PicoMCD = 0; // mega CD status: scd_started
\r
27 // to be called once on emu init
\r
30 // Blank space for state:
\r
31 memset(&Pico,0,sizeof(Pico));
\r
32 memset(&PicoPad,0,sizeof(PicoPad));
\r
36 z80_init(); // init even if we aren't going to use it
\r
45 // to be called once on emu exit
\r
52 if(SRam.data) free(SRam.data); SRam.data=0;
\r
55 int PicoReset(int hard)
\r
57 unsigned int region=0;
\r
58 int support=0,hw=0,i=0;
\r
59 unsigned char pal=0;
\r
60 unsigned char sram_reg=Pico.m.sram_reg; // must be preserved
\r
62 if (Pico.romsize<=0) return 1;
\r
66 // s68k doesn't have the TAS quirk, so we just globally set normal TAS handler in MCD mode (used by Batman games).
\r
67 SekSetRealTAS(PicoMCD & 1);
\r
71 // reset VDP state, VRAM and PicoMisc
\r
72 //memset(&Pico.video,0,sizeof(Pico.video));
\r
73 //memset(&Pico.vram,0,sizeof(Pico.vram));
\r
74 memset(Pico.ioports,0,sizeof(Pico.ioports)); // needed for MCD to reset properly
\r
75 memset(&Pico.m,0,sizeof(Pico.m));
\r
76 Pico.video.pending_ints=0;
\r
80 // clear all memory of the emulated machine
\r
81 memset(&Pico.ram,0,(unsigned int)&Pico.rom-(unsigned int)&Pico.ram);
\r
84 // default VDP register values (based on Fusion)
\r
85 Pico.video.reg[0] = Pico.video.reg[1] = 0x04;
\r
86 Pico.video.reg[0xc] = 0x81;
\r
87 Pico.video.reg[0xf] = 0x02;
\r
88 Pico.m.dirtyPal = 1;
\r
90 if(PicoRegionOverride)
\r
92 support = PicoRegionOverride;
\r
96 // Read cartridge region data:
\r
97 region=PicoRead32(0x1f0);
\r
103 c=region>>(i<<3); c&=0xff;
\r
104 if (c<=' ') continue;
\r
106 if (c=='J') support|=1;
\r
107 else if (c=='U') support|=4;
\r
108 else if (c=='E') support|=8;
\r
109 else if (c=='j') {support|=1; break; }
\r
110 else if (c=='u') {support|=4; break; }
\r
111 else if (c=='e') {support|=8; break; }
\r
117 support|=strtol(s,NULL,16);
\r
122 // auto detection order override
\r
123 if (PicoAutoRgnOrder) {
\r
124 if (((PicoAutoRgnOrder>>0)&0xf) & support) support = (PicoAutoRgnOrder>>0)&0xf;
\r
125 else if (((PicoAutoRgnOrder>>4)&0xf) & support) support = (PicoAutoRgnOrder>>4)&0xf;
\r
126 else if (((PicoAutoRgnOrder>>8)&0xf) & support) support = (PicoAutoRgnOrder>>8)&0xf;
\r
129 // Try to pick the best hardware value for English/50hz:
\r
130 if (support&8) { hw=0xc0; pal=1; } // Europe
\r
131 else if (support&4) hw=0x80; // USA
\r
132 else if (support&2) { hw=0x40; pal=1; } // Japan PAL
\r
133 else if (support&1) hw=0x00; // Japan NTSC
\r
134 else hw=0x80; // USA
\r
136 Pico.m.hardware=(unsigned char)(hw|0x20); // No disk attached
\r
138 Pico.video.status = 0x3408 | pal; // always set bits | vblank | pal
\r
140 sound_reset(); // pal must be known here
\r
143 PicoResetMCD(hard);
\r
147 // reset sram state; enable sram access by default if it doesn't overlap with ROM
\r
148 Pico.m.sram_reg=sram_reg&0x14;
\r
149 if (!(Pico.m.sram_reg&4) && Pico.romsize <= SRam.start) Pico.m.sram_reg |= 1;
\r
151 elprintf(EL_STATUS, "sram: det: %i; eeprom: %i; start: %06x; end: %06x",
\r
152 (Pico.m.sram_reg>>4)&1, (Pico.m.sram_reg>>2)&1, SRam.start, SRam.end);
\r
158 // dma2vram settings are just hacks to unglitch Legend of Galahad (needs <= 104 to work)
\r
159 // same for Outrunners (92-121, when active is set to 24)
\r
160 static const int dma_timings[] = {
\r
161 83, 167, 166, 83, // vblank: 32cell: dma2vram dma2[vs|c]ram vram_fill vram_copy
\r
162 102, 205, 204, 102, // vblank: 40cell:
\r
163 16, 16, 15, 8, // active: 32cell:
\r
164 24, 18, 17, 9 // ...
\r
167 static const int dma_bsycles[] = {
\r
168 (488<<8)/82, (488<<8)/167, (488<<8)/166, (488<<8)/83,
\r
169 (488<<8)/102, (488<<8)/205, (488<<8)/204, (488<<8)/102,
\r
170 (488<<8)/16, (488<<8)/16, (488<<8)/15, (488<<8)/8,
\r
171 (488<<8)/24, (488<<8)/18, (488<<8)/17, (488<<8)/9
\r
174 PICO_INTERNAL int CheckDMA(void)
\r
176 int burn = 0, xfers_can, dma_op = Pico.video.reg[0x17]>>6; // see gens for 00 and 01 modes
\r
177 int xfers = Pico.m.dma_xfers;
\r
180 if(!(dma_op&2)) dma_op = (Pico.video.type==1) ? 0 : 1; // setting dma_timings offset here according to Gens
\r
182 if(Pico.video.reg[12] & 1) dma_op |= 4; // 40 cell mode?
\r
183 if(!(Pico.video.status&8)&&(Pico.video.reg[1]&0x40)) dma_op|=8; // active display?
\r
184 xfers_can = dma_timings[dma_op];
\r
185 if(xfers <= xfers_can) {
\r
186 if(dma_op&2) Pico.video.status&=~2; // dma no longer busy
\r
188 burn = xfers * dma_bsycles[dma_op] >> 8; // have to be approximate because can't afford division..
\r
190 Pico.m.dma_xfers = 0;
\r
192 if(!(dma_op&2)) burn = 488;
\r
193 Pico.m.dma_xfers -= xfers_can;
\r
196 elprintf(EL_VDPDMA, "~Dma %i op=%i can=%i burn=%i [%i]", Pico.m.dma_xfers, dma_op1, xfers_can, burn, SekCyclesDone());
\r
197 //dprintf("~aim: %i, cnt: %i", SekCycleAim, SekCycleCnt);
\r
201 static __inline void SekRunM68k(int cyc)
\r
205 //printf("aim: %i, cnt: %i\n", SekCycleAim, SekCycleCnt);
\r
206 if((cyc_do=SekCycleAim-SekCycleCnt) <= 0) return;
\r
207 //printf("cyc_do: %i\n", cyc_do);
\r
208 #if defined(EMU_C68K) && defined(EMU_M68K)
\r
209 // this means we do run-compare Cyclone vs Musashi
\r
210 SekCycleCnt+=CM_compareRun(cyc_do);
\r
211 #elif defined(EMU_C68K)
\r
212 PicoCpuCM68k.cycles=cyc_do;
\r
213 CycloneRun(&PicoCpuCM68k);
\r
214 SekCycleCnt+=cyc_do-PicoCpuCM68k.cycles;
\r
215 #elif defined(EMU_M68K)
\r
216 SekCycleCnt+=m68k_execute(cyc_do);
\r
217 #elif defined(EMU_F68K)
\r
218 SekCycleCnt+=m68k_emulate(cyc_do);
\r
222 static __inline void SekStep(void)
\r
224 // this is required for timing sensitive stuff to work
\r
225 int realaim=SekCycleAim; SekCycleAim=SekCycleCnt+1;
\r
226 #if defined(EMU_C68K) && defined(EMU_M68K)
\r
227 // this means we do run-compare Cyclone vs Musashi
\r
228 SekCycleCnt+=CM_compareRun(1);
\r
229 #elif defined(EMU_C68K)
\r
230 PicoCpuCM68k.cycles=1;
\r
231 CycloneRun(&PicoCpuCM68k);
\r
232 SekCycleCnt+=1-PicoCpuCM68k.cycles;
\r
233 #elif defined(EMU_M68K)
\r
234 SekCycleCnt+=m68k_execute(1);
\r
235 #elif defined(EMU_F68K)
\r
236 SekCycleCnt+=m68k_emulate(1);
\r
238 SekCycleAim=realaim;
\r
241 static int CheckIdle(void)
\r
243 int i, state[0x22];
\r
245 // See if the state is the same after 2 steps:
\r
246 SekState(state); SekStep(); SekStep(); SekState(state+0x11);
\r
247 for (i = 0x10; i >= 0; i--)
\r
248 if (state[i] != state[i+0x11]) return 0;
\r
254 // to be called on 224 or line_sample scanlines only
\r
255 static __inline void getSamples(int y)
\r
257 static int curr_pos = 0;
\r
261 curr_pos += sound_render(curr_pos, PsndLen-PsndLen/2);
\r
262 else curr_pos = sound_render(0, PsndLen);
\r
263 if (emustatus&1) emustatus|=2; else emustatus&=~2;
\r
264 if (PicoWriteSound) PicoWriteSound(curr_pos);
\r
265 // clear sound buffer
\r
268 else if(emustatus & 3) {
\r
271 curr_pos = sound_render(0, PsndLen/2);
\r
276 #include "PicoFrameHints.c"
\r
278 // helper z80 runner. Runs only if z80 is enabled at this point
\r
279 // (z80WriteBusReq will handle the rest)
\r
280 static void PicoRunZ80Simple(int line_from, int line_to)
\r
282 int line_from_r=line_from, line_to_r=line_to, line=0;
\r
283 int line_sample = Pico.m.pal ? 68 : 93;
\r
285 if (!(PicoOpt&4) || Pico.m.z80Run == 0) line_to_r = 0;
\r
287 extern const unsigned short vcounts[];
\r
288 if (z80startCycle) {
\r
289 line = vcounts[z80startCycle>>8];
\r
290 if (line > line_from)
\r
291 line_from_r = line;
\r
293 z80startCycle = SekCyclesDone();
\r
297 // we have ym2612 enabled, so we have to run Z80 in lines, so we could update DAC and timers
\r
298 for (line = line_from; line < line_to; line++) {
\r
299 sound_timers_and_dac(line);
\r
300 if ((line == 224 || line == line_sample) && PsndOut) getSamples(line);
\r
301 if (line == 32 && PsndOut) emustatus &= ~1;
\r
302 if (line >= line_from_r && line < line_to_r)
\r
305 } else if (line_to_r-line_from_r > 0) {
\r
306 z80_run(228*(line_to_r-line_from_r));
\r
307 // samples will be taken by caller
\r
311 // Simple frame without H-Ints
\r
312 static int PicoFrameSimple(void)
\r
314 struct PicoVideo *pv=&Pico.video;
\r
315 int y=0,line=0,lines=0,lines_step=0,sects;
\r
316 int cycles_68k_vblock,cycles_68k_block;
\r
318 // split to 16 run calls for active scan, for vblank split to 2 (ntsc), 3 (pal 240), 4 (pal 224)
\r
319 if (Pico.m.pal && (pv->reg[1]&8)) {
\r
320 if(pv->reg[1]&8) { // 240 lines
\r
321 cycles_68k_block = 7329; // (488*240+148)/16.0, -4
\r
322 cycles_68k_vblock = 11640; // (72*488-148-68)/3.0, 0
\r
325 cycles_68k_block = 6841; // (488*224+148)/16.0, -4
\r
326 cycles_68k_vblock = 10682; // (88*488-148-68)/4.0, 0
\r
330 // M68k cycles/frame: 127840.71
\r
331 cycles_68k_block = 6841; // (488*224+148)/16.0, -4
\r
332 cycles_68k_vblock = 9164; // (38*488-148-68)/2.0, 0
\r
336 // we don't emulate DMA timing in this mode
\r
337 if (Pico.m.dma_xfers) {
\r
338 Pico.m.dma_xfers=0;
\r
339 Pico.video.status&=~2;
\r
343 pv->lwrite_cnt = 0;
\r
344 Pico.video.status|=0x200;
\r
346 Pico.m.scanline=-1;
\r
351 // 6 button pad: let's just say it timed out now
\r
352 Pico.m.padTHPhase[0]=Pico.m.padTHPhase[1]=0;
\r
354 // ---- Active Scan ----
\r
355 pv->status&=~0x88; // clear V-Int, come out of vblank
\r
357 // Run in sections:
\r
358 for(sects=16; sects; sects--)
\r
360 if (CheckIdle()) break;
\r
362 lines += lines_step;
\r
363 SekRunM68k(cycles_68k_block);
\r
365 PicoRunZ80Simple(line, lines);
\r
369 // run Z80 for remaining sections
\r
371 int c = sects*cycles_68k_block;
\r
373 // this "run" is for approriate line counter, etc
\r
377 lines += sects*lines_step;
\r
378 PicoRunZ80Simple(line, lines);
\r
382 if (!PicoSkipFrame)
\r
384 if (!(PicoOpt&0x10))
\r
386 #if CAN_HANDLE_240_LINES
\r
387 if (pv->reg[1]&8) {
\r
388 for (y=0;y<240;y++) PicoLine(y);
\r
390 for (y=0;y<224;y++) PicoLine(y);
\r
393 for (y=0;y<224;y++) PicoLine(y);
\r
395 else PicoFrameFull();
\r
396 #ifdef DRAW_FINISH_FUNC
\r
397 DRAW_FINISH_FUNC();
\r
401 // here we render sound if ym2612 is disabled
\r
402 if (!(PicoOpt&1) && PsndOut) {
\r
403 int len = sound_render(0, PsndLen);
\r
404 if (PicoWriteSound) PicoWriteSound(len);
\r
405 // clear sound buffer
\r
409 // a gap between flags set and vint
\r
410 pv->pending_ints|=0x20;
\r
411 pv->status|=8; // go into vblank
\r
414 // ---- V-Blanking period ----
\r
417 if(pv->reg[1]&8) { // 240 lines
\r
418 lines = line = 240;
\r
422 lines = line = 224;
\r
427 lines = line = 224;
\r
432 if (pv->reg[1]&0x20) SekInterrupt(6); // Set IRQ
\r
433 if (Pico.m.z80Run && (PicoOpt&4))
\r
437 lines += lines_step;
\r
439 SekRunM68k(cycles_68k_vblock);
\r
441 PicoRunZ80Simple(line, lines);
\r
445 if (sects && CheckIdle()) break;
\r
448 // run Z80 for remaining sections
\r
450 lines += sects*lines_step;
\r
451 PicoRunZ80Simple(line, lines);
\r
457 int PicoFrame(void)
\r
461 Pico.m.frame_count++;
\r
468 // be accurate if we are asked for this
\r
469 if(PicoOpt&0x40) acc=1;
\r
470 // don't be accurate in alternative render mode, as hint effects will not be rendered anyway
\r
471 else if(PicoOpt&0x10) acc = 0;
\r
472 else acc=Pico.video.reg[0]&0x10; // be accurate if hints are used
\r
474 //if(Pico.video.reg[12]&0x2) Pico.video.status ^= 0x10; // change odd bit in interlace mode
\r
476 if(!(PicoOpt&0x10))
\r
481 else PicoFrameSimple();
\r
486 void PicoFrameDrawOnly(void)
\r
490 for (y=0;y<224;y++) PicoLine(y);
\r
493 // callback to output message from emu
\r
494 void (*PicoMessage)(const char *msg)=NULL;
\r
496 #if 1 // defined(__DEBUG_PRINT)
\r
497 // tmp debug: dump some stuff
\r
498 #define bit(r, x) ((r>>x)&1)
\r
499 void z80_debug(char *dstr);
\r
500 char *debugString(void)
\r
503 static char dstr[1024];
\r
504 struct PicoVideo *pv=&Pico.video;
\r
505 unsigned char *reg=pv->reg, r;
\r
509 sprintf(dstrp, "mode set 1: %02x\n", (r=reg[0])); dstrp+=strlen(dstrp);
\r
510 sprintf(dstrp, "display_disable: %i, M3: %i, palette: %i, ?, hints: %i\n", bit(r,0), bit(r,1), bit(r,2), bit(r,4));
\r
511 dstrp+=strlen(dstrp);
\r
512 sprintf(dstrp, "mode set 2: %02x\n", (r=reg[1])); dstrp+=strlen(dstrp);
\r
513 sprintf(dstrp, "SMS/gen: %i, pal: %i, dma: %i, vints: %i, disp: %i, TMS: %i\n", bit(r,2), bit(r,3), bit(r,4),
\r
514 bit(r,5), bit(r,6), bit(r,7)); dstrp+=strlen(dstrp);
\r
515 sprintf(dstrp, "mode set 3: %02x\n", (r=reg[0xB])); dstrp+=strlen(dstrp);
\r
516 sprintf(dstrp, "LSCR: %i, HSCR: %i, 2cell vscroll: %i, IE2: %i\n", bit(r,0), bit(r,1), bit(r,2), bit(r,3)); dstrp+=strlen(dstrp);
\r
517 sprintf(dstrp, "mode set 4: %02x\n", (r=reg[0xC])); dstrp+=strlen(dstrp);
\r
518 sprintf(dstrp, "interlace: %i%i, cells: %i, shadow: %i\n", bit(r,2), bit(r,1), (r&0x80) ? 40 : 32, bit(r,3));
\r
519 dstrp+=strlen(dstrp);
\r
520 sprintf(dstrp, "scroll size: w: %i, h: %i SRAM: %i; eeprom: %i (%i)\n", reg[0x10]&3, (reg[0x10]&0x30)>>4,
\r
521 bit(Pico.m.sram_reg, 4), bit(Pico.m.sram_reg, 2), SRam.eeprom_type); dstrp+=strlen(dstrp);
\r
522 sprintf(dstrp, "sram range: %06x-%06x, reg: %02x\n", SRam.start, SRam.end, Pico.m.sram_reg); dstrp+=strlen(dstrp);
\r
523 sprintf(dstrp, "pend int: v:%i, h:%i, vdp status: %04x\n", bit(pv->pending_ints,5), bit(pv->pending_ints,4), pv->status);
\r
524 dstrp+=strlen(dstrp);
\r
525 #if defined(EMU_C68K)
\r
526 sprintf(dstrp, "M68k: PC: %06x, st_flg: %x, cycles: %u\n", SekPc, PicoCpuCM68k.state_flags, SekCyclesDoneT());
\r
527 dstrp+=strlen(dstrp);
\r
528 sprintf(dstrp, "d0=%08x, a0=%08x, osp=%08x, irql=%i\n", PicoCpuCM68k.d[0], PicoCpuCM68k.a[0], PicoCpuCM68k.osp, PicoCpuCM68k.irq); dstrp+=strlen(dstrp);
\r
529 sprintf(dstrp, "d1=%08x, a1=%08x, sr=%04x\n", PicoCpuCM68k.d[1], PicoCpuCM68k.a[1], CycloneGetSr(&PicoCpuCM68k)); dstrp+=strlen(dstrp);
\r
530 for(r=2; r < 8; r++) {
\r
531 sprintf(dstrp, "d%i=%08x, a%i=%08x\n", r, PicoCpuCM68k.d[r], r, PicoCpuCM68k.a[r]); dstrp+=strlen(dstrp);
\r
533 #elif defined(EMU_M68K)
\r
534 sprintf(dstrp, "M68k: PC: %06x, cycles: %u, irql: %i\n", SekPc, SekCyclesDoneT(), PicoCpuMM68k.int_level>>8); dstrp+=strlen(dstrp);
\r
535 #elif defined(EMU_F68K)
\r
536 sprintf(dstrp, "M68k: PC: %06x, cycles: %u, irql: %i\n", SekPc, SekCyclesDoneT(), PicoCpuFM68k.interrupts[0]); dstrp+=strlen(dstrp);
\r
538 sprintf(dstrp, "z80Run: %i, pal: %i, frame#: %i\n", Pico.m.z80Run, Pico.m.pal, Pico.m.frame_count); dstrp+=strlen(dstrp);
\r
539 z80_debug(dstrp); dstrp+=strlen(dstrp);
\r
540 if (strlen(dstr) > sizeof(dstr))
\r
541 printf("warning: debug buffer overflow (%i/%i)\n", strlen(dstr), sizeof(dstr));
\r
544 struct PicoVideo *pvid=&Pico.video;
\r
547 static char dstr[1024*8];
\r
550 table=pvid->reg[5]&0x7f;
\r
551 if (pvid->reg[12]&1) table&=0x7e; // Lowest bit 0 in 40-cell mode
\r
552 table<<=8; // Get sprite table address/2
\r
554 for (i=u=n=0; u < 80 && n < 20; u++)
\r
556 unsigned int *sprite;
\r
557 int code, code2, sx, sy, height;
\r
559 sprite=(unsigned int *)(Pico.vram+((table+(link<<2))&0x7ffc)); // Find sprite
\r
564 // check if it is on this line
\r
565 sy = (code&0x1ff);//-0x80;
\r
566 height = ((code>>24)&3)+1;
\r
570 sx = (code2>>16)&0x1ff;
\r
572 printf("#%02i x: %03i y: %03i %ix%i\n", u, sx, sy, ((code>>26)&3)+1, height);
\r
574 link=(code>>16)&0x7f;
\r
575 if(!link) break; // End of sprites
\r
581 FILE *f = fopen("zram", "wb");
\r
582 fwrite(Pico.zram, 1, 0x2000, f);
\r