As PicoDrive is multiplatform emulator, this is GP2X specific part of readme about configuration. If you have questions, you can use GP32X to ask for help. http://www.gp32x.com/board/index.php?showforum=48 Configuration ------------- 1. "Renderer" 8bit fast: This enables alternative heavily optimized tile-based renderer, which renders pixels not line-by-line (this is what accurate renderers do), but in 8x8 tiles, which is much faster. But because of the way it works it can't render any mid-frame image changes (raster effects), so it is useful only with some games. Other two are accurate line-based renderers. The 8bit is faster but does not run well with some games like Street Racer. 2. "Scaling" "hw" means GP2X hardware scaler, which causes no performance loss, but scaled image looks a bit blocky. "sw" means software scaling, which uses pixel averaging and may look a bit nicer, but blurry. Horizontal scaling is only for games which use so called "32 column mode" (256x224 or 256x240), and scales image width to 320 pixels. Vertical scales height to 240 for games which use height 224 (most of them). 3. "Accurate timing" This adds some more emulation precision, but slows the emulation down. Without this option some games do not boot (Red Zone for example), others have sound problems. This options has no effect for Sega/Mega CD emulation. 4. "Accurate sprites" This option improves emulation of sprite priorities, it also enables emulation of sprite collision bit. If you see one sprite being drawn incorrectly above the other (often seen in Sonic 3D Blast), you can enable this to fix the problem. This only works with the accurate renderers (see first option). 5. "Show FPS" Self-explanatory. Format is XX/YY, where XX is the number of rendered frames and YY is the number of emulated frames per second. 6. "Frameskip" How many frames to skip rendering before displaying another. "Auto" is recommended. 7. "Enable sound" Does what it says. You must enable at least YM2612 or SN76496 (in advanced options, see below) for this to make sense. 8. "Sound Quality" Sound rate and stereo mode. If you want 44100Hz sound, it is recommended to enable the second core (next option). 9. "Use ARM940 core for sound" This option causes PicoDrive to use ARM940T core (GP2X's second CPU) for sound (i.e. to generate YM2612 samples) to improve performance noticeably. 10. "6 button pad" If you enable this, games will think that 6 button gamepad is connected. If you go and reconfigure your keys, you will be able to bind X,Y,Z and mode actions. 11. "Region" This option lets you force the game to think it is running on machine from the specified region, or just to set autodetection order. Also affects Sega/Mega CD. 12. "Use SRAM/BRAM savestates" This will automatically read/write SRAM (or BRAM for Sega/Mega CD) savestates for games which are using them. SRAM is saved whenever you pause your game or exit the emulator. 13. "Confirm savestate" Allows to enable confirmation on savestate saving (to prevent savestate overwrites), on loading (to prevent destroying current game progress), and on both or none. 14. "GP2X CPU clocks" Here you can change clocks of both GP2X's CPUs. Larger values increase performance. There is no separate option for the second CPU because both CPUs use the same clock source. Setting this option to 200 will cause PicoDrive NOT to change GP2X's clocks at all (this is if you use external program to set clock). 15. "[Sega/Mega CD options]" Enters Sega/Mega CD options menu (see below). 16. "[advanced options]" Enters advanced options menu (see below). 17. "Save cfg as default" If you save your config here it will be loaded on next ROM load, but only if there is no game specific config saved (which will be loaded in that case). 18. "Save cfg for current game only" Whenever you load current ROM again these settings will be loaded (squidgehack and RAM settings will not take effect until emulator is restarted). Advanced configuration ---------------------- Enter [advanced options] in config menu to see these options. 1. "Gamma correction" Alters image gamma through GP2X hardware. Larger values make image to look brighter, lower - darker (default is 1.0). 2. "Emulate Z80" Enables emulation of Z80 chip, which was mostly used to drive the other sound chips. Some games do complex sync with it, so you must enable it even if you don't use sound to be able to play them. 3. "Emulate YM2612 (FM)" This enables emulation of six-channel FM sound synthesizer chip, which was used to produce sound effects and music. 4. "Emulate SN76496 (PSG)" This enables emulation of additional sound chip for additional effects. Note: if you change sound settings AFTER loading a ROM, you may need to reset game to get sound. This is because most games initialize sound chips on startup, and this data is lost when sound chips are being enabled/disabled. 5. "gzip savestates" This will always apply gzip compression on your savestates, allowing you to save some space and load/save time. 6. "Don't save last used ROM" This will disable writing last used ROM to config on exit (what might cause SD card corruption according to DaveC). 7. "craigix's RAM timings" This overclocks the GP2X RAM chips, but may cause instability. Recommended if you use the second core for sound. Needs emulator restart to take effect. See this thread: http://www.gp32x.com/board/index.php?showtopic=32319 8. "squidgehack" Well known way to improve the GP2X performance. You must restart the emulator for the change of this option to take effect. Sega/Mega CD options -------------------- 1,2,3. "USA/EUR/JAP BIOS" These options just show if your BIOS files were correctly detected by the emulator (it shows the filename it is using). If so, you can press Start to test your BIOS. 4. "CD LEDs" The Sega/Mega CD unit had two blinking LEDs (red and green) on it. This option will display them on top-left corner of the screen. 5. "CDDA audio (using mp3s)" This option enables CD audio playback. 6. "PCM audio" This enables 8 channel PCM sound source. It is required for some games to run, because they monitor state of this audio chip. 7. "ReadAhead buffer" This option is for dealing with slow SD card access in GP2X, which makes FMV games unplayable. It will allow emulator not to access SD card for longer periods of time, but it will take more time to fill the buffer. 8. "Save RAM cart" Here you can enable 64K RAM cart. Format it in BIOS if you do. 9. "Scale/Rot. fx" The Sega/Mega CD had scaling/rotation chip, which allows effects similar to "Mode 7" effects in SNES. Unfortunately emulating it is slow, and very few games used it, so it's better to disable this option, unless game really needs it. 10. "Better sync" This option is similar to "Perfect synchro" in Gens. Some games require it to run, for example most (all?) Wolfteam games, and some other ones. Don't use it for games which don't need it, it will just slow them down. Key configuration ----------------- When you select "Configure controls" from the menu, you enter a key configuration mode, where you use SELECT to change an action, and then press a key you like to bind to that action. You can press the same key again to unbind. Select "DONE" action and press any key to finish.