- struct PicoVideo *pv=&Pico.video;
- int total_z80=0,lines,y,lines_vis = 224,z80CycleAim = 0,line_sample,counter75hz_lim;
- const int cycles_68k=488,cycles_z80=228,cycles_s68k=795; // both PAL and NTSC compile to same values
- int skip=PicoSkipFrame || (PicoOpt&0x10);
- int hint; // Hint counter
-
- if(Pico.m.pal) { //
- //cycles_68k = (int) ((double) OSC_PAL / 7 / 50 / 312 + 0.4); // should compile to a constant (488)
- //cycles_z80 = (int) ((double) OSC_PAL / 15 / 50 / 312 + 0.4); // 228
- lines = 312; // Steve Snake says there are 313 lines, but this seems to also work well
- line_sample = 68;
- counter75hz_lim = 2080;
- if(pv->reg[1]&8) lines_vis = 240;
- } else {
- //cycles_68k = (int) ((double) OSC_NTSC / 7 / 60 / 262 + 0.4); // 488
- //cycles_z80 = (int) ((double) OSC_NTSC / 15 / 60 / 262 + 0.4); // 228
- lines = 262;
- counter75hz_lim = 2096;
- line_sample = 93;
- }
-
- SekCyclesReset();
- SekCyclesResetS68k();
- //z80ExtraCycles = 0;
-
- if(PicoOpt&4)
- z80CycleAim = 0;
-// z80_resetCycles();
-
- pv->status&=~0x88; // clear V-Int, come out of vblank
-
- hint=pv->reg[10]; // Load H-Int counter
- //dprintf("-hint: %i", hint);
-
- for (y=0;y<lines;y++)
- {
- Pico.m.scanline=(short)y;
-
- // pad delay (for 6 button pads)
- if(PicoOpt&0x20) {
- if(Pico.m.padDelay[0]++ > 25) Pico.m.padTHPhase[0]=0;
- if(Pico.m.padDelay[1]++ > 25) Pico.m.padTHPhase[1]=0;
- }
-
- check_cd_dma();
-
- // H-Interrupts:
- if(y <= lines_vis && --hint < 0) // y <= lines_vis: Comix Zone, Golden Axe
- {
- //dprintf("rhint:old @ %06x", SekPc);
- hint=pv->reg[10]; // Reload H-Int counter
- pv->pending_ints|=0x10;
- if (pv->reg[0]&0x10) SekInterrupt(4);
- //dprintf("rhint: %i @ %06x [%i|%i]", hint, SekPc, y, SekCycleCnt);
- //dprintf("hint_routine: %x", (*(unsigned short*)(Pico.ram+0x0B84)<<16)|*(unsigned short*)(Pico.ram+0x0B86));
- }
-
- // V-Interrupt:
- if (y == lines_vis)
- {
- //dprintf("vint: @ %06x [%i|%i]", SekPc, y, SekCycleCnt);
- pv->status|=0x88; // V-Int happened, go into vblank
- SekRun(128); SekCycleAim-=128; // there must be a gap between H and V ints, also after vblank bit set (Mazin Saga, Bram Stoker's Dracula)
- /*if(Pico.m.z80Run && (PicoOpt&4)) {
- z80CycleAim+=cycles_z80/2;
- total_z80+=z80_run(z80CycleAim-total_z80);
- z80CycleAim-=cycles_z80/2;
- }*/
- pv->pending_ints|=0x20;
- if(pv->reg[1]&0x20) SekInterrupt(6);
- if(Pico.m.z80Run && (PicoOpt&4)) // ?
- z80_int();
- //dprintf("zint: [%i|%i] zPC=%04x", Pico.m.scanline, SekCyclesDone(), mz80GetRegisterValue(NULL, 0));
- }
-
- // decide if we draw this line
-#if CAN_HANDLE_240_LINES
- if(!skip && ((!(pv->reg[1]&8) && y<224) || ((pv->reg[1]&8) && y<240)) )
-#else
- if(!skip && y<224)
-#endif
- PicoLine(y);
-
- if(PicoOpt&1)
- sound_timers_and_dac(y);
-
- // get samples from sound chips
- if(y == 32 && PsndOut)
- emustatus &= ~1;
- else if((y == 224 || y == line_sample) && PsndOut)
- ;//getSamples(y);
-
- // Run scanline:
- //dprintf("m68k starting exec @ %06x", SekPc);
- if(Pico.m.dma_bytes) SekCycleCnt+=CheckDMA();
- SekRun(cycles_68k);
- if ((Pico_mcd->m68k_regs[1]&3) == 1) { // no busreq/no reset
-#if 0
- int i;
- FILE *f = fopen("prg_ram.bin", "wb");
- for (i = 0; i < 0x80000; i+=2)
- {
- int tmp = Pico_mcd->prg_ram[i];
- Pico_mcd->prg_ram[i] = Pico_mcd->prg_ram[i+1];
- Pico_mcd->prg_ram[i+1] = tmp;
- }
- fwrite(Pico_mcd->prg_ram, 1, 0x80000, f);
- fclose(f);
- exit(1);
+ int counter_timer, int3_set;
+ int counter75hz_lim = Pico.m.pal ? 2080 : 2096;
+
+ // 75Hz CDC update
+ if ((Pico_mcd->m.counter75hz+=10) >= counter75hz_lim) {
+ Pico_mcd->m.counter75hz -= counter75hz_lim;
+ Check_CD_Command();
+ }
+
+ // update timers
+ counter_timer = Pico.m.pal ? 0x21630 : 0x2121c; // 136752 : 135708;
+ Pico_mcd->m.timer_stopwatch += counter_timer;
+ if ((int3_set = Pico_mcd->s68k_regs[0x31])) {
+ Pico_mcd->m.timer_int3 -= counter_timer;
+ if (Pico_mcd->m.timer_int3 < 0) {
+ if (Pico_mcd->s68k_regs[0x33] & (1<<3)) {
+ elprintf(EL_INTS, "s68k: timer irq 3");
+ SekInterruptS68k(3);
+ Pico_mcd->m.timer_int3 += int3_set << 16;
+ }
+ // is this really what happens if irq3 is masked out?
+ Pico_mcd->m.timer_int3 &= 0xffffff;
+ }
+ }
+
+ // update gfx chip
+ if (Pico_mcd->rot_comp.Reg_58 & 0x8000)
+ gfx_cd_update();
+
+ // delayed setting of DMNA bit (needed for Silpheed)
+ if (Pico_mcd->m.state_flags & 2) {
+ Pico_mcd->m.state_flags &= ~2;
+ if (!(Pico_mcd->s68k_regs[3] & 4)) {
+ Pico_mcd->s68k_regs[3] |= 2;
+ Pico_mcd->s68k_regs[3] &= ~1;
+#ifdef USE_POLL_DETECT
+ if ((s68k_poll_adclk&0xfe) == 2) {
+ SekSetStopS68k(0); s68k_poll_adclk = 0;
+ }