}\r
\r
\r
-PICO_INTERNAL int PicoInitPc(u32 pc)\r
+PICO_INTERNAL void PicoInitPc(u32 pc)\r
{\r
PicoCheckPc(pc);\r
- return 0;\r
}\r
\r
#ifndef _ASM_MEMORY_C\r
int PadRead(int i)\r
{\r
int pad,value,data_reg;\r
- pad=~PicoPad[i]; // Get inverse of pad MXYZ SACB RLDU\r
+ pad=~PicoPadInt[i]; // Get inverse of pad MXYZ SACB RLDU\r
data_reg=Pico.ioports[i+1];\r
\r
// orr the bits, which are set as output\r
log_io(a, 8, 0);\r
if ((a&0xff4000)==0xa00000) { d=z80Read8(a); goto end; } // Z80 Ram\r
\r
- if ((a&0xe700e0)==0xc00000) // VDP\r
- d=PicoVideoRead(a);\r
- else d=OtherRead16(a&~1, 8);\r
+ if ((a&0xe700e0)==0xc00000) { d=PicoVideoRead8(a); goto end; } // VDP\r
+\r
+ d=OtherRead16(a&~1, 8);\r
if ((a&1)==0) d>>=8;\r
\r
end:\r
\r
static void PicoWrite32(u32 a,u32 d)\r
{\r
- elprintf(EL_IO, "w32: %06x, %08x", a&0xffffff, d);\r
+ elprintf(EL_IO, "w32: %06x, %08x @%06x", a&0xffffff, d, SekPc);\r
#ifdef EMU_CORE_DEBUG\r
lastwrite_cyc_d[lwp_cyc++&15] = d;\r
#endif\r
\r
// -----------------------------------------------------------------\r
\r
-extern const unsigned short vcounts[];\r
-\r
static int get_scanline(int is_from_z80)\r
{\r
if (is_from_z80) {\r
return z80_scanline;\r
}\r
\r
- if (Pico.m.scanline != -1)\r
- return Pico.m.scanline;\r
-\r
- return vcounts[SekCyclesDone()>>8];\r
+ return Pico.m.scanline;\r
}\r
\r
-/* probably not should be in this file, but it's near related code here */\r
+/* probably should not be in this file, but it's near related code here */\r
void ym2612_sync_timers(int z80_cycles, int mode_old, int mode_new)\r
{\r
int xcycles = z80_cycles << 8;\r
\r
/* update timer a */\r
if (mode_old & 1)\r
- while (xcycles >= timer_a_next_oflow)\r
+ while (xcycles > timer_a_next_oflow)\r
timer_a_next_oflow += timer_a_step;\r
\r
if ((mode_old ^ mode_new) & 1) // turning on/off\r
{\r
- if (mode_old & 1) {\r
- timer_a_offset = timer_a_next_oflow - xcycles;\r
- timer_a_next_oflow = 0x70000000;\r
- }\r
+ if (mode_old & 1)\r
+ timer_a_next_oflow = TIMER_NO_OFLOW;\r
else\r
- timer_a_next_oflow = xcycles + timer_a_offset;\r
+ timer_a_next_oflow = xcycles + timer_a_step;\r
}\r
if (mode_new & 1)\r
elprintf(EL_YMTIMER, "timer a upd to %i @ %i", timer_a_next_oflow>>8, z80_cycles);\r
\r
/* update timer b */\r
if (mode_old & 2)\r
- while (xcycles >= timer_b_next_oflow)\r
+ while (xcycles > timer_b_next_oflow)\r
timer_b_next_oflow += timer_b_step;\r
\r
if ((mode_old ^ mode_new) & 2)\r
{\r
- if (mode_old & 2) {\r
- timer_b_offset = timer_b_next_oflow - xcycles;\r
- timer_b_next_oflow = 0x70000000;\r
- }\r
+ if (mode_old & 2)\r
+ timer_b_next_oflow = TIMER_NO_OFLOW;\r
else\r
- timer_b_next_oflow = xcycles + timer_b_offset;\r
+ timer_b_next_oflow = xcycles + timer_b_step;\r
}\r
if (mode_new & 2)\r
elprintf(EL_YMTIMER, "timer b upd to %i @ %i", timer_b_next_oflow>>8, z80_cycles);\r
ym2612.OPN.ST.TA = TAnew;\r
//ym2612.OPN.ST.TAC = (1024-TAnew)*18;\r
//ym2612.OPN.ST.TAT = 0;\r
- //\r
- timer_a_step = timer_a_offset = 16495 * (1024 - TAnew);\r
+ timer_a_step = TIMER_A_TICK_ZCYCLES * (1024 - TAnew);\r
if (ym2612.OPN.ST.mode & 1) {\r
+ // this is not right, should really be done on overflow only\r
int cycles = is_from_z80 ? z80_cyclesDone() : cycles_68k_to_z80(SekCyclesDone());\r
timer_a_next_oflow = (cycles << 8) + timer_a_step;\r
}\r
if (ym2612.OPN.ST.TB != d) {\r
//elprintf(EL_STATUS, "timer b set %i", d);\r
ym2612.OPN.ST.TB = d;\r
- //ym2612.OPN.ST.TBC = (256-d)<<4;\r
- //ym2612.OPN.ST.TBC *= 18;\r
+ //ym2612.OPN.ST.TBC = (256-d) * 288;\r
//ym2612.OPN.ST.TBT = 0;\r
- timer_b_step = timer_b_offset = 263912 * (256 - d);\r
+ timer_b_step = TIMER_B_TICK_ZCYCLES * (256 - d); // 262800\r
if (ym2612.OPN.ST.mode & 2) {\r
int cycles = is_from_z80 ? z80_cyclesDone() : cycles_68k_to_z80(SekCyclesDone());\r
timer_b_next_oflow = (cycles << 8) + timer_b_step;\r
\r
if ((d ^ old_mode) & 0xc0) {\r
#ifdef __GP2X__\r
- if (PicoOpt & POPT_EXT_FM) YM2612Write_940(a, d, get_scanline(is_from_z80));\r
+ if (PicoOpt & POPT_EXT_FM) return YM2612Write_940(a, d, get_scanline(is_from_z80));\r
#endif\r
return 1;\r
}\r
return ym2612.OPN.ST.status;\r
}\r
\r
-// TODO: new ym2612 savestates\r
+void ym2612_pack_state(void)\r
+{\r
+ // timers are saved as tick counts, in 16.16 int format\r
+ int tac, tat = 0, tbc, tbt = 0;\r
+ tac = 1024 - ym2612.OPN.ST.TA;\r
+ tbc = 256 - ym2612.OPN.ST.TB;\r
+ if (timer_a_next_oflow != TIMER_NO_OFLOW)\r
+ tat = (int)((double)(timer_a_step - timer_a_next_oflow) / (double)timer_a_step * tac * 65536);\r
+ if (timer_b_next_oflow != TIMER_NO_OFLOW)\r
+ tbt = (int)((double)(timer_b_step - timer_b_next_oflow) / (double)timer_b_step * tbc * 65536);\r
+ elprintf(EL_YMTIMER, "save: timer a %i/%i", tat >> 16, tac);\r
+ elprintf(EL_YMTIMER, "save: timer b %i/%i", tbt >> 16, tbc);\r
+\r
+#ifdef __GP2X__\r
+ if (PicoOpt & POPT_EXT_FM)\r
+ YM2612PicoStateSave2_940(tat, tbt);\r
+ else\r
+#endif\r
+ YM2612PicoStateSave2(tat, tbt);\r
+}\r
+\r
void ym2612_unpack_state(void)\r
{\r
- int i;\r
+ int i, ret, tac, tat, tbc, tbt;\r
YM2612PicoStateLoad();\r
\r
// feed all the registers and update internal state\r
- for (i = 0x20; i < 0xC0; i++) {\r
+ for (i = 0x20; i < 0xA0; i++) {\r
+ ym2612_write_local(0, i, 0);\r
+ ym2612_write_local(1, ym2612.REGS[i], 0);\r
+ }\r
+ for (i = 0x30; i < 0xA0; i++) {\r
+ ym2612_write_local(2, i, 0);\r
+ ym2612_write_local(3, ym2612.REGS[i|0x100], 0);\r
+ }\r
+ for (i = 0xAF; i >= 0xA0; i--) { // must apply backwards\r
+ ym2612_write_local(2, i, 0);\r
+ ym2612_write_local(3, ym2612.REGS[i|0x100], 0);\r
ym2612_write_local(0, i, 0);\r
ym2612_write_local(1, ym2612.REGS[i], 0);\r
}\r
- for (i = 0x30; i < 0xC0; i++) {\r
+ for (i = 0xB0; i < 0xB8; i++) {\r
+ ym2612_write_local(0, i, 0);\r
+ ym2612_write_local(1, ym2612.REGS[i], 0);\r
ym2612_write_local(2, i, 0);\r
ym2612_write_local(3, ym2612.REGS[i|0x100], 0);\r
}\r
+\r
+#ifdef __GP2X__\r
+ if (PicoOpt & POPT_EXT_FM)\r
+ ret = YM2612PicoStateLoad2_940(&tat, &tbt);\r
+ else\r
+#endif\r
+ ret = YM2612PicoStateLoad2(&tat, &tbt);\r
+ if (ret != 0) {\r
+ elprintf(EL_STATUS, "old ym2612 state");\r
+ return; // no saved timers\r
+ }\r
+\r
+ tac = (1024 - ym2612.OPN.ST.TA) << 16;\r
+ tbc = (256 - ym2612.OPN.ST.TB) << 16;\r
+ if (ym2612.OPN.ST.mode & 1)\r
+ timer_a_next_oflow = (int)((double)(tac - tat) / (double)tac * timer_a_step);\r
+ else\r
+ timer_a_next_oflow = TIMER_NO_OFLOW;\r
+ if (ym2612.OPN.ST.mode & 2)\r
+ timer_b_next_oflow = (int)((double)(tbc - tbt) / (double)tbc * timer_b_step);\r
+ else\r
+ timer_b_next_oflow = TIMER_NO_OFLOW;\r
+ elprintf(EL_YMTIMER, "load: %i/%i, timer_a_next_oflow %i", tat>>16, tac>>16, timer_a_next_oflow >> 8);\r
+ elprintf(EL_YMTIMER, "load: %i/%i, timer_b_next_oflow %i", tbt>>16, tbc>>16, timer_b_next_oflow >> 8);\r
}\r
\r
// -----------------------------------------------------------------\r
\r
if ((a>>13)==2) // 0x4000-0x5fff (Charles MacDonald)\r
{\r
- if (PicoOpt&POPT_EN_FM) ret = ym2612_read_local_z80();\r
- return ret;\r
+ return ym2612_read_local_z80();\r
}\r
\r
if (a>=0x8000)\r