X-Git-Url: https://notaz.gp2x.de/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=Pico%2FPicoFrameHints.c;h=cc77f5f90f407c64b745cebf8fedeb79b68a2ddc;hb=5f9a0d16309e732ad09b4f5827422cf658bed8c2;hp=76ba0ff4064d31a9fd8aff2ac34b1174a7713ad2;hpb=385a849102d74ac187a9c145d5df5fad9385fc1b;p=picodrive.git

diff --git a/Pico/PicoFrameHints.c b/Pico/PicoFrameHints.c
index 76ba0ff..cc77f5f 100644
--- a/Pico/PicoFrameHints.c
+++ b/Pico/PicoFrameHints.c
@@ -4,8 +4,6 @@
 #define CYCLES_M68K_LINE     488 // suitable for both PAL/NTSC
 #define CYCLES_M68K_VINT_LAG  68
 #define CYCLES_M68K_ASD      148
-#define CYCLES_Z80_LINE      228
-#define CYCLES_Z80_ASD        69
 #define CYCLES_S68K_LINE     795
 #define CYCLES_S68K_ASD      241
 
@@ -18,10 +16,10 @@
 
 // CPUS_RUN
 #ifndef PICO_CD
-#define CPUS_RUN(m68k_cycles,z80_cycles,s68k_cycles) \
+#define CPUS_RUN(m68k_cycles,s68k_cycles) \
     SekRunM68k(m68k_cycles);
 #else
-#define CPUS_RUN(m68k_cycles,z80_cycles,s68k_cycles) \
+#define CPUS_RUN(m68k_cycles,s68k_cycles) \
 { \
     if ((PicoOpt&POPT_EN_MCD_PSYNC) && (Pico_mcd->m.busreq&3) == 1) { \
       SekRunPS(m68k_cycles, s68k_cycles); /* "better/perfect sync" */ \
@@ -37,9 +35,11 @@
 static int PicoFrameHints(void)
 {
   struct PicoVideo *pv=&Pico.video;
-  int lines, y, lines_vis = 224, line_sample, skip;
+  int lines, y, lines_vis = 224, line_sample, skip, vcnt_wrap;
   int hint; // Hint counter
 
+  pv->v_counter = Pico.m.scanline = 0;
+
   if ((PicoOpt&POPT_ALT_RENDERER) && !PicoSkipFrame && (pv->reg[1]&0x40)) { // fast rend., display enabled
     // draw a frame just after vblank in alternative render mode
     // yes, this will cause 1 frame lag, but this is inaccurate mode anyway.
@@ -53,7 +53,7 @@ static int PicoFrameHints(void)
 
   if (Pico.m.pal) {
     line_sample = 68;
-    if(pv->reg[1]&8) lines_vis = 240;
+    if (pv->reg[1]&8) lines_vis = 240;
   } else {
     line_sample = 93;
   }
@@ -63,7 +63,6 @@ static int PicoFrameHints(void)
 #ifdef PICO_CD
   SekCyclesResetS68k();
 #endif
-  timers_cycle();
   PsndDacLine = 0;
 
   pv->status&=~0x88; // clear V-Int, come out of vblank
@@ -72,11 +71,16 @@ static int PicoFrameHints(void)
   //dprintf("-hint: %i", hint);
 
   // This is to make active scan longer (needed for Double Dragon 2, mainly)
-  CPUS_RUN(CYCLES_M68K_ASD, 0, CYCLES_S68K_ASD);
+  CPUS_RUN(CYCLES_M68K_ASD, CYCLES_S68K_ASD);
 
-  for (y=0;y<lines_vis;y++)
+  for (y = 0; y < lines_vis; y++)
   {
-    Pico.m.scanline=(short)y;
+    pv->v_counter = Pico.m.scanline = y;
+    if ((pv->reg[12]&6) == 6) { // interlace mode 2
+      pv->v_counter <<= 1;
+      pv->v_counter |= pv->v_counter >> 8;
+      pv->v_counter &= 0xff;
+    }
 
     // VDP FIFO
     pv->lwrite_cnt -= 12;
@@ -102,24 +106,15 @@ static int PicoFrameHints(void)
     }
 
     // decide if we draw this line
-    if (!skip)
+    if (!skip && (PicoOpt & POPT_ALT_RENDERER))
     {
-      if (PicoOpt&POPT_ALT_RENDERER) {
-        // find the right moment for fast renderer, when display is no longer blanked
-        if ((pv->reg[1]&0x40) || y > 100) {
-          PicoFrameFull();
+      // find the right moment for frame renderer, when display is no longer blanked
+      if ((pv->reg[1]&0x40) || y > 100) {
+        PicoFrameFull();
 #ifdef DRAW_FINISH_FUNC
-          DRAW_FINISH_FUNC();
+        DRAW_FINISH_FUNC();
 #endif
-          skip = 1;
-        }
-      }
-      else
-      {
-#if !CAN_HANDLE_240_LINES
-        if (y < 224)
-#endif
-          PicoLine(y);
+        skip = 1;
       }
     }
 
@@ -129,7 +124,7 @@ static int PicoFrameHints(void)
       emustatus &= ~1;
     else if ((y == 224 || y == line_sample) && PsndOut)
     {
-      if (Pico.m.z80Run && (PicoOpt&POPT_EN_Z80))
+      if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80))
         PicoSyncZ80(SekCycleCnt);
       if (ym2612.dacen && PsndDacLine <= y)
         PsndDoDAC(y);
@@ -139,27 +134,34 @@ static int PicoFrameHints(void)
 
     // Run scanline:
     if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA());
-    CPUS_RUN(CYCLES_M68K_LINE, CYCLES_Z80_LINE, CYCLES_S68K_LINE);
+    CPUS_RUN(CYCLES_M68K_LINE, CYCLES_S68K_LINE);
 
 #ifdef PICO_CD
     update_chips();
 #else
-    if (PicoLineHook) PicoLineHook(1);
+    if (PicoLineHook) PicoLineHook();
 #endif
   }
 
-#ifdef DRAW_FINISH_FUNC
   if (!skip)
+  {
+    if (DrawScanline < y)
+      PicoDrawSync(y - 1, 0);
+#ifdef DRAW_FINISH_FUNC
     DRAW_FINISH_FUNC();
 #endif
+  }
 
   // V-int line (224 or 240)
-  Pico.m.scanline=(short)y;
+  Pico.m.scanline = y;
+  pv->v_counter = 0xe0; // bad for 240 mode
+  if ((pv->reg[12]&6) == 6) pv->v_counter = 0xc1;
 
   // VDP FIFO
   pv->lwrite_cnt=0;
   Pico.video.status|=0x200;
 
+  memcpy(PicoPadInt, PicoPad, sizeof(PicoPadInt));
   PAD_DELAY
 #ifdef PICO_CD
   check_cd_dma();
@@ -174,7 +176,6 @@ static int PicoFrameHints(void)
     if (pv->reg[0]&0x10) SekInterrupt(4);
   }
 
-  // V-Interrupt:
   pv->status|=0x08; // go into vblank
   pv->pending_ints|=0x20;
 
@@ -188,7 +189,7 @@ static int PicoFrameHints(void)
     elprintf(EL_INTS, "vint: @ %06x [%i]", SekPc, SekCycleCnt);
     SekInterrupt(6);
   }
-  if (Pico.m.z80Run && (PicoOpt&POPT_EN_Z80)) {
+  if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80)) {
     PicoSyncZ80(SekCycleCnt);
     elprintf(EL_INTS, "zint");
     z80_int();
@@ -208,20 +209,26 @@ static int PicoFrameHints(void)
   // Run scanline:
   if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA());
   CPUS_RUN(CYCLES_M68K_LINE - CYCLES_M68K_VINT_LAG - CYCLES_M68K_ASD,
-    CYCLES_Z80_LINE - CYCLES_Z80_ASD, CYCLES_S68K_LINE - CYCLES_S68K_ASD);
+    CYCLES_S68K_LINE - CYCLES_S68K_ASD);
 
 #ifdef PICO_CD
   update_chips();
 #else
-  if (PicoLineHook) PicoLineHook(1);
+  if (PicoLineHook) PicoLineHook();
 #endif
 
   // PAL line count might actually be 313 according to Steve Snake, but that would complicate things.
   lines = Pico.m.pal ? 312 : 262;
+  vcnt_wrap = Pico.m.pal ? 0x103 : 0xEB; // based on Gens
 
-  for (y++;y<lines;y++)
+  for (y++; y < lines; y++)
   {
-    Pico.m.scanline=(short)y;
+    pv->v_counter = Pico.m.scanline = y;
+    if (y >= vcnt_wrap)
+      pv->v_counter -= Pico.m.pal ? 56 : 6;
+    if ((pv->reg[12]&6) == 6)
+      pv->v_counter = (pv->v_counter << 1) | 1;
+    pv->v_counter &= 0xff;
 
     PAD_DELAY
 #ifdef PICO_CD
@@ -230,25 +237,26 @@ static int PicoFrameHints(void)
 
     // Run scanline:
     if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA());
-    CPUS_RUN(CYCLES_M68K_LINE, CYCLES_Z80_LINE, CYCLES_S68K_LINE);
+    CPUS_RUN(CYCLES_M68K_LINE, CYCLES_S68K_LINE);
 
 #ifdef PICO_CD
     update_chips();
 #else
-    if (PicoLineHook) PicoLineHook(1);
+    if (PicoLineHook) PicoLineHook();
 #endif
   }
 
   // sync z80
-  if (Pico.m.z80Run && (PicoOpt&POPT_EN_Z80))
-    PicoSyncZ80(SekCycleCnt);
+  if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80))
+    PicoSyncZ80(Pico.m.pal ? 151809 : 127671); // cycles adjusted for converter
   if (PsndOut && ym2612.dacen && PsndDacLine <= lines-1)
     PsndDoDAC(lines-1);
 
+  timers_cycle();
+
   return 0;
 }
 
 #undef PAD_DELAY
-#undef Z80_RUN
 #undef CPUS_RUN