X-Git-Url: https://notaz.gp2x.de/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=deps%2Flibchdr%2Fdeps%2Flzma-24.05%2Finclude%2FLzmaDec.h;fp=deps%2Flibchdr%2Fdeps%2Flzma-22.01%2Finclude%2FLzmaDec.h;h=b0ce28fa02a1adc422b7269c4e6d2c2d26fc60b9;hb=f535537faaef474f7d31e50949eea1f15a58ee09;hp=6194b7d127825ffd43a3a0bb46d507cf69fe2309;hpb=db02598e737b8d50cd347fe2ef13cb85ade051dd;p=pcsx_rearmed.git diff --git a/deps/libchdr/deps/lzma-22.01/include/LzmaDec.h b/deps/libchdr/deps/lzma-24.05/include/LzmaDec.h similarity index 93% rename from deps/libchdr/deps/lzma-22.01/include/LzmaDec.h rename to deps/libchdr/deps/lzma-24.05/include/LzmaDec.h index 6194b7d1..b0ce28fa 100644 --- a/deps/libchdr/deps/lzma-22.01/include/LzmaDec.h +++ b/deps/libchdr/deps/lzma-24.05/include/LzmaDec.h @@ -1,236 +1,237 @@ -/* LzmaDec.h -- LZMA Decoder -2020-03-19 : Igor Pavlov : Public domain */ - -#ifndef __LZMA_DEC_H -#define __LZMA_DEC_H - -#include "7zTypes.h" - -EXTERN_C_BEGIN - -/* #define _LZMA_PROB32 */ -/* _LZMA_PROB32 can increase the speed on some CPUs, - but memory usage for CLzmaDec::probs will be doubled in that case */ - -typedef -#ifdef _LZMA_PROB32 - UInt32 -#else - UInt16 -#endif - CLzmaProb; - - -/* ---------- LZMA Properties ---------- */ - -#define LZMA_PROPS_SIZE 5 - -typedef struct _CLzmaProps -{ - Byte lc; - Byte lp; - Byte pb; - Byte _pad_; - UInt32 dicSize; -} CLzmaProps; - -/* LzmaProps_Decode - decodes properties -Returns: - SZ_OK - SZ_ERROR_UNSUPPORTED - Unsupported properties -*/ - -SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); - - -/* ---------- LZMA Decoder state ---------- */ - -/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case. - Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */ - -#define LZMA_REQUIRED_INPUT_MAX 20 - -typedef struct -{ - /* Don't change this structure. ASM code can use it. */ - CLzmaProps prop; - CLzmaProb *probs; - CLzmaProb *probs_1664; - Byte *dic; - SizeT dicBufSize; - SizeT dicPos; - const Byte *buf; - UInt32 range; - UInt32 code; - UInt32 processedPos; - UInt32 checkDicSize; - UInt32 reps[4]; - UInt32 state; - UInt32 remainLen; - - UInt32 numProbs; - unsigned tempBufSize; - Byte tempBuf[LZMA_REQUIRED_INPUT_MAX]; -} CLzmaDec; - -#define LzmaDec_Construct(p) { (p)->dic = NULL; (p)->probs = NULL; } - -void LzmaDec_Init(CLzmaDec *p); - -/* There are two types of LZMA streams: - - Stream with end mark. That end mark adds about 6 bytes to compressed size. - - Stream without end mark. You must know exact uncompressed size to decompress such stream. */ - -typedef enum -{ - LZMA_FINISH_ANY, /* finish at any point */ - LZMA_FINISH_END /* block must be finished at the end */ -} ELzmaFinishMode; - -/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!! - - You must use LZMA_FINISH_END, when you know that current output buffer - covers last bytes of block. In other cases you must use LZMA_FINISH_ANY. - - If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK, - and output value of destLen will be less than output buffer size limit. - You can check status result also. - - You can use multiple checks to test data integrity after full decompression: - 1) Check Result and "status" variable. - 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize. - 3) Check that output(srcLen) = compressedSize, if you know real compressedSize. - You must use correct finish mode in that case. */ - -typedef enum -{ - LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */ - LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */ - LZMA_STATUS_NOT_FINISHED, /* stream was not finished */ - LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */ - LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */ -} ELzmaStatus; - -/* ELzmaStatus is used only as output value for function call */ - - -/* ---------- Interfaces ---------- */ - -/* There are 3 levels of interfaces: - 1) Dictionary Interface - 2) Buffer Interface - 3) One Call Interface - You can select any of these interfaces, but don't mix functions from different - groups for same object. */ - - -/* There are two variants to allocate state for Dictionary Interface: - 1) LzmaDec_Allocate / LzmaDec_Free - 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs - You can use variant 2, if you set dictionary buffer manually. - For Buffer Interface you must always use variant 1. - -LzmaDec_Allocate* can return: - SZ_OK - SZ_ERROR_MEM - Memory allocation error - SZ_ERROR_UNSUPPORTED - Unsupported properties -*/ - -SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAllocPtr alloc); -void LzmaDec_FreeProbs(CLzmaDec *p, ISzAllocPtr alloc); - -SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAllocPtr alloc); -void LzmaDec_Free(CLzmaDec *p, ISzAllocPtr alloc); - -/* ---------- Dictionary Interface ---------- */ - -/* You can use it, if you want to eliminate the overhead for data copying from - dictionary to some other external buffer. - You must work with CLzmaDec variables directly in this interface. - - STEPS: - LzmaDec_Construct() - LzmaDec_Allocate() - for (each new stream) - { - LzmaDec_Init() - while (it needs more decompression) - { - LzmaDec_DecodeToDic() - use data from CLzmaDec::dic and update CLzmaDec::dicPos - } - } - LzmaDec_Free() -*/ - -/* LzmaDec_DecodeToDic - - The decoding to internal dictionary buffer (CLzmaDec::dic). - You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! - -finishMode: - It has meaning only if the decoding reaches output limit (dicLimit). - LZMA_FINISH_ANY - Decode just dicLimit bytes. - LZMA_FINISH_END - Stream must be finished after dicLimit. - -Returns: - SZ_OK - status: - LZMA_STATUS_FINISHED_WITH_MARK - LZMA_STATUS_NOT_FINISHED - LZMA_STATUS_NEEDS_MORE_INPUT - LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK - SZ_ERROR_DATA - Data error - SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure -*/ - -SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, - const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); - - -/* ---------- Buffer Interface ---------- */ - -/* It's zlib-like interface. - See LzmaDec_DecodeToDic description for information about STEPS and return results, - but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need - to work with CLzmaDec variables manually. - -finishMode: - It has meaning only if the decoding reaches output limit (*destLen). - LZMA_FINISH_ANY - Decode just destLen bytes. - LZMA_FINISH_END - Stream must be finished after (*destLen). -*/ - -SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, - const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); - - -/* ---------- One Call Interface ---------- */ - -/* LzmaDecode - -finishMode: - It has meaning only if the decoding reaches output limit (*destLen). - LZMA_FINISH_ANY - Decode just destLen bytes. - LZMA_FINISH_END - Stream must be finished after (*destLen). - -Returns: - SZ_OK - status: - LZMA_STATUS_FINISHED_WITH_MARK - LZMA_STATUS_NOT_FINISHED - LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK - SZ_ERROR_DATA - Data error - SZ_ERROR_MEM - Memory allocation error - SZ_ERROR_UNSUPPORTED - Unsupported properties - SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src). - SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure -*/ - -SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, - const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, - ELzmaStatus *status, ISzAllocPtr alloc); - -EXTERN_C_END - -#endif +/* LzmaDec.h -- LZMA Decoder +2023-04-02 : Igor Pavlov : Public domain */ + +#ifndef ZIP7_INC_LZMA_DEC_H +#define ZIP7_INC_LZMA_DEC_H + +#include "7zTypes.h" + +EXTERN_C_BEGIN + +/* #define Z7_LZMA_PROB32 */ +/* Z7_LZMA_PROB32 can increase the speed on some CPUs, + but memory usage for CLzmaDec::probs will be doubled in that case */ + +typedef +#ifdef Z7_LZMA_PROB32 + UInt32 +#else + UInt16 +#endif + CLzmaProb; + + +/* ---------- LZMA Properties ---------- */ + +#define LZMA_PROPS_SIZE 5 + +typedef struct +{ + Byte lc; + Byte lp; + Byte pb; + Byte _pad_; + UInt32 dicSize; +} CLzmaProps; + +/* LzmaProps_Decode - decodes properties +Returns: + SZ_OK + SZ_ERROR_UNSUPPORTED - Unsupported properties +*/ + +SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size); + + +/* ---------- LZMA Decoder state ---------- */ + +/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case. + Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */ + +#define LZMA_REQUIRED_INPUT_MAX 20 + +typedef struct +{ + /* Don't change this structure. ASM code can use it. */ + CLzmaProps prop; + CLzmaProb *probs; + CLzmaProb *probs_1664; + Byte *dic; + SizeT dicBufSize; + SizeT dicPos; + const Byte *buf; + UInt32 range; + UInt32 code; + UInt32 processedPos; + UInt32 checkDicSize; + UInt32 reps[4]; + UInt32 state; + UInt32 remainLen; + + UInt32 numProbs; + unsigned tempBufSize; + Byte tempBuf[LZMA_REQUIRED_INPUT_MAX]; +} CLzmaDec; + +#define LzmaDec_CONSTRUCT(p) { (p)->dic = NULL; (p)->probs = NULL; } +#define LzmaDec_Construct(p) LzmaDec_CONSTRUCT(p) + +void LzmaDec_Init(CLzmaDec *p); + +/* There are two types of LZMA streams: + - Stream with end mark. That end mark adds about 6 bytes to compressed size. + - Stream without end mark. You must know exact uncompressed size to decompress such stream. */ + +typedef enum +{ + LZMA_FINISH_ANY, /* finish at any point */ + LZMA_FINISH_END /* block must be finished at the end */ +} ELzmaFinishMode; + +/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!! + + You must use LZMA_FINISH_END, when you know that current output buffer + covers last bytes of block. In other cases you must use LZMA_FINISH_ANY. + + If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK, + and output value of destLen will be less than output buffer size limit. + You can check status result also. + + You can use multiple checks to test data integrity after full decompression: + 1) Check Result and "status" variable. + 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize. + 3) Check that output(srcLen) = compressedSize, if you know real compressedSize. + You must use correct finish mode in that case. */ + +typedef enum +{ + LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */ + LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */ + LZMA_STATUS_NOT_FINISHED, /* stream was not finished */ + LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */ + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */ +} ELzmaStatus; + +/* ELzmaStatus is used only as output value for function call */ + + +/* ---------- Interfaces ---------- */ + +/* There are 3 levels of interfaces: + 1) Dictionary Interface + 2) Buffer Interface + 3) One Call Interface + You can select any of these interfaces, but don't mix functions from different + groups for same object. */ + + +/* There are two variants to allocate state for Dictionary Interface: + 1) LzmaDec_Allocate / LzmaDec_Free + 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs + You can use variant 2, if you set dictionary buffer manually. + For Buffer Interface you must always use variant 1. + +LzmaDec_Allocate* can return: + SZ_OK + SZ_ERROR_MEM - Memory allocation error + SZ_ERROR_UNSUPPORTED - Unsupported properties +*/ + +SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAllocPtr alloc); +void LzmaDec_FreeProbs(CLzmaDec *p, ISzAllocPtr alloc); + +SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAllocPtr alloc); +void LzmaDec_Free(CLzmaDec *p, ISzAllocPtr alloc); + +/* ---------- Dictionary Interface ---------- */ + +/* You can use it, if you want to eliminate the overhead for data copying from + dictionary to some other external buffer. + You must work with CLzmaDec variables directly in this interface. + + STEPS: + LzmaDec_Construct() + LzmaDec_Allocate() + for (each new stream) + { + LzmaDec_Init() + while (it needs more decompression) + { + LzmaDec_DecodeToDic() + use data from CLzmaDec::dic and update CLzmaDec::dicPos + } + } + LzmaDec_Free() +*/ + +/* LzmaDec_DecodeToDic + + The decoding to internal dictionary buffer (CLzmaDec::dic). + You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!! + +finishMode: + It has meaning only if the decoding reaches output limit (dicLimit). + LZMA_FINISH_ANY - Decode just dicLimit bytes. + LZMA_FINISH_END - Stream must be finished after dicLimit. + +Returns: + SZ_OK + status: + LZMA_STATUS_FINISHED_WITH_MARK + LZMA_STATUS_NOT_FINISHED + LZMA_STATUS_NEEDS_MORE_INPUT + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK + SZ_ERROR_DATA - Data error + SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure +*/ + +SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, + const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); + + +/* ---------- Buffer Interface ---------- */ + +/* It's zlib-like interface. + See LzmaDec_DecodeToDic description for information about STEPS and return results, + but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need + to work with CLzmaDec variables manually. + +finishMode: + It has meaning only if the decoding reaches output limit (*destLen). + LZMA_FINISH_ANY - Decode just destLen bytes. + LZMA_FINISH_END - Stream must be finished after (*destLen). +*/ + +SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, + const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status); + + +/* ---------- One Call Interface ---------- */ + +/* LzmaDecode + +finishMode: + It has meaning only if the decoding reaches output limit (*destLen). + LZMA_FINISH_ANY - Decode just destLen bytes. + LZMA_FINISH_END - Stream must be finished after (*destLen). + +Returns: + SZ_OK + status: + LZMA_STATUS_FINISHED_WITH_MARK + LZMA_STATUS_NOT_FINISHED + LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK + SZ_ERROR_DATA - Data error + SZ_ERROR_MEM - Memory allocation error + SZ_ERROR_UNSUPPORTED - Unsupported properties + SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src). + SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure +*/ + +SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, + const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode, + ELzmaStatus *status, ISzAllocPtr alloc); + +EXTERN_C_END + +#endif