X-Git-Url: https://notaz.gp2x.de/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=deps%2Flibchdr%2Fdeps%2Fzstd-1.5.5%2Ftests%2FREADME.md;fp=deps%2Flibchdr%2Fdeps%2Fzstd-1.5.5%2Ftests%2FREADME.md;h=2cf0e76c20e19a98f553cb07daa9722ed6e2d702;hb=648db22b0750712da893c306efcc8e4b2d3a4e3c;hp=0000000000000000000000000000000000000000;hpb=e2fb1389dc12376acb84e4993ed3b08760257252;p=pcsx_rearmed.git diff --git a/deps/libchdr/deps/zstd-1.5.5/tests/README.md b/deps/libchdr/deps/zstd-1.5.5/tests/README.md new file mode 100644 index 00000000..2cf0e76c --- /dev/null +++ b/deps/libchdr/deps/zstd-1.5.5/tests/README.md @@ -0,0 +1,184 @@ +Programs and scripts for automated testing of Zstandard +======================================================= + +This directory contains the following programs and scripts: +- `datagen` : Synthetic and parametrable data generator, for tests +- `fullbench` : Precisely measure speed for each zstd inner functions +- `fuzzer` : Test tool, to check zstd integrity on target platform +- `paramgrill` : parameter tester for zstd +- `test-zstd-speed.py` : script for testing zstd speed difference between commits +- `test-zstd-versions.py` : compatibility test between zstd versions stored on Github (v0.1+) +- `zstreamtest` : Fuzzer test tool for zstd streaming API +- `legacy` : Test tool to test decoding of legacy zstd frames +- `decodecorpus` : Tool to generate valid Zstandard frames, for verifying decoder implementations + + +#### `test-zstd-versions.py` - script for testing zstd interoperability between versions + +This script creates `versionsTest` directory to which zstd repository is cloned. +Then all tagged (released) versions of zstd are compiled. +In the following step interoperability between zstd versions is checked. + +#### `automated-benchmarking.py` - script for benchmarking zstd prs to dev + +This script benchmarks facebook:dev and changes from pull requests made to zstd and compares +them against facebook:dev to detect regressions. This script currently runs on a dedicated +desktop machine for every pull request that is made to the zstd repo but can also +be run on any machine via the command line interface. + +There are three modes of usage for this script: fastmode will just run a minimal single +build comparison (between facebook:dev and facebook:release), onetime will pull all the current +pull requests from the zstd repo and compare facebook:dev to all of them once, continuous +will continuously get pull requests from the zstd repo and run benchmarks against facebook:dev. + +``` +Example usage: python automated_benchmarking.py +``` + +``` +usage: automated_benchmarking.py [-h] [--directory DIRECTORY] + [--levels LEVELS] [--iterations ITERATIONS] + [--emails EMAILS] [--frequency FREQUENCY] + [--mode MODE] [--dict DICT] + +optional arguments: + -h, --help show this help message and exit + --directory DIRECTORY + directory with files to benchmark + --levels LEVELS levels to test e.g. ('1,2,3') + --iterations ITERATIONS + number of benchmark iterations to run + --emails EMAILS email addresses of people who will be alerted upon + regression. Only for continuous mode + --frequency FREQUENCY + specifies the number of seconds to wait before each + successive check for new PRs in continuous mode + --mode MODE 'fastmode', 'onetime', 'current', or 'continuous' (see + README.md for details) + --dict DICT filename of dictionary to use (when set, this + dictionary will be used to compress the files provided + inside --directory) +``` + +#### `test-zstd-speed.py` - script for testing zstd speed difference between commits + +DEPRECATED + +This script creates `speedTest` directory to which zstd repository is cloned. +Then it compiles all branches of zstd and performs a speed benchmark for a given list of files (the `testFileNames` parameter). +After `sleepTime` (an optional parameter, default 300 seconds) seconds the script checks repository for new commits. +If a new commit is found it is compiled and a speed benchmark for this commit is performed. +The results of the speed benchmark are compared to the previous results. +If compression or decompression speed for one of zstd levels is lower than `lowerLimit` (an optional parameter, default 0.98) the speed benchmark is restarted. +If second results are also lower than `lowerLimit` the warning e-mail is sent to recipients from the list (the `emails` parameter). + +Additional remarks: +- To be sure that speed results are accurate the script should be run on a "stable" target system with no other jobs running in parallel +- Using the script with virtual machines can lead to large variations of speed results +- The speed benchmark is not performed until computers' load average is lower than `maxLoadAvg` (an optional parameter, default 0.75) +- The script sends e-mails using `mutt`; if `mutt` is not available it sends e-mails without attachments using `mail`; if both are not available it only prints a warning + + +The example usage with two test files, one e-mail address, and with an additional message: +``` +./test-zstd-speed.py "silesia.tar calgary.tar" "email@gmail.com" --message "tested on my laptop" --sleepTime 60 +``` + +To run the script in background please use: +``` +nohup ./test-zstd-speed.py testFileNames emails & +``` + +The full list of parameters: +``` +positional arguments: + testFileNames file names list for speed benchmark + emails list of e-mail addresses to send warnings + +optional arguments: + -h, --help show this help message and exit + --message MESSAGE attach an additional message to e-mail + --lowerLimit LOWERLIMIT + send email if speed is lower than given limit + --maxLoadAvg MAXLOADAVG + maximum load average to start testing + --lastCLevel LASTCLEVEL + last compression level for testing + --sleepTime SLEEPTIME + frequency of repository checking in seconds +``` + +#### `decodecorpus` - tool to generate Zstandard frames for decoder testing +Command line tool to generate test .zst files. + +This tool will generate .zst files with checksums, +as well as optionally output the corresponding correct uncompressed data for +extra verification. + +Example: +``` +./decodecorpus -ptestfiles -otestfiles -n10000 -s5 +``` +will generate 10,000 sample .zst files using a seed of 5 in the `testfiles` directory, +with the zstd checksum field set, +as well as the 10,000 original files for more detailed comparison of decompression results. + +``` +./decodecorpus -t -T1mn +``` +will choose a random seed, and for 1 minute, +generate random test frames and ensure that the +zstd library correctly decompresses them in both simple and streaming modes. + +#### `paramgrill` - tool for generating compression table parameters and optimizing parameters on file given constraints + +Full list of arguments +``` + -T# : set level 1 speed objective + -B# : cut input into blocks of size # (default : single block) + -S : benchmarks a single run (example command: -Sl3w10h12) + w# - windowLog + h# - hashLog + c# - chainLog + s# - searchLog + l# - minMatch + t# - targetLength + S# - strategy + L# - level + --zstd= : Single run, parameter selection syntax same as zstdcli with more parameters + (Added forceAttachDictionary / fadt) + When invoked with --optimize, this represents the sample to exceed. + --optimize= : find parameters to maximize compression ratio given parameters + Can use all --zstd= commands to constrain the type of solution found in addition to the following constraints + cSpeed= : Minimum compression speed + dSpeed= : Minimum decompression speed + cMem= : Maximum compression memory + lvl= : Searches for solutions which are strictly better than that compression lvl in ratio and cSpeed, + stc= : When invoked with lvl=, represents percentage slack in ratio/cSpeed allowed for a solution to be considered (Default 100%) + : In normal operation, represents percentage slack in choosing viable starting strategy selection in choosing the default parameters + (Lower value will begin with stronger strategies) (Default 90%) + speedRatio= (accepts decimals) + : determines value of gains in speed vs gains in ratio + when determining overall winner (default 5 (1% ratio = 5% speed)). + tries= : Maximum number of random restarts on a single strategy before switching (Default 5) + Higher values will make optimizer run longer, more chances to find better solution. + memLog : Limits the log of the size of each memotable (1 per strategy). Will use hash tables when state space is larger than max size. + Setting memLog = 0 turns off memoization + --display= : specify which parameters are included in the output + can use all --zstd parameter names and 'cParams' as a shorthand for all parameters used in ZSTD_compressionParameters + (Default: display all params available) + -P# : generated sample compressibility (when no file is provided) + -t# : Caps runtime of operation in seconds (default: 99999 seconds (about 27 hours)) + -v : Prints Benchmarking output + -D : Next argument dictionary file + -s : Benchmark all files separately + -q : Quiet, repeat for more quiet + -q Prints parameters + results whenever a new best is found + -qq Only prints parameters whenever a new best is found, prints final parameters + results + -qqq Only print final parameters + results + -qqqq Only prints final parameter set in the form --zstd= + -v : Verbose, cancels quiet, repeat for more volume + -v Prints all candidate parameters and results + +``` + Any inputs afterwards are treated as files to benchmark.