X-Git-Url: https://notaz.gp2x.de/cgi-bin/gitweb.cgi?a=blobdiff_plain;f=pico%2Fpico_cmn.c;h=d2a1d94cf6019eac41f565e8bf0c8e5093b92149;hb=12f23dac6f91eb707f985ef00a5d48e9e5ef8838;hp=0907b930e92e27bbf8eded4241240db47e2680f7;hpb=334f00e24ed55a3e259d1a9d42c4530a770b9a56;p=picodrive.git

diff --git a/pico/pico_cmn.c b/pico/pico_cmn.c
index 0907b93..d2a1d94 100644
--- a/pico/pico_cmn.c
+++ b/pico/pico_cmn.c
@@ -7,7 +7,7 @@
  */
 
 #define CYCLES_M68K_LINE     488 // suitable for both PAL/NTSC
-#define CYCLES_M68K_VINT_LAG  68
+#define CYCLES_M68K_VINT_LAG 112
 
 // pad delay (for 6 button pads)
 #define PAD_DELAY() { \
@@ -21,24 +21,24 @@
   SekRunM68k(m68k_cycles)
 #endif
 
-// sync m68k to SekCycleAim
+// sync m68k to Pico.t.m68c_aim
 static void SekSyncM68k(void)
 {
   int cyc_do;
   pprof_start(m68k);
   pevt_log_m68k_o(EVT_RUN_START);
 
-  while ((cyc_do = SekCycleAim - SekCycleCnt) > 0) {
-    SekCycleCnt += cyc_do;
+  while ((cyc_do = Pico.t.m68c_aim - Pico.t.m68c_cnt) > 0) {
+    Pico.t.m68c_cnt += cyc_do;
 
 #if defined(EMU_C68K)
     PicoCpuCM68k.cycles = cyc_do;
     CycloneRun(&PicoCpuCM68k);
-    SekCycleCnt -= PicoCpuCM68k.cycles;
+    Pico.t.m68c_cnt -= PicoCpuCM68k.cycles;
 #elif defined(EMU_M68K)
-    SekCycleCnt += m68k_execute(cyc_do) - cyc_do;
+    Pico.t.m68c_cnt += m68k_execute(cyc_do) - cyc_do;
 #elif defined(EMU_F68K)
-    SekCycleCnt += fm68k_emulate(cyc_do, 0) - cyc_do;
+    Pico.t.m68c_cnt += fm68k_emulate(&PicoCpuFM68k, cyc_do, 0) - cyc_do;
 #endif
   }
 
@@ -49,13 +49,13 @@ static void SekSyncM68k(void)
   pprof_end(m68k);
 }
 
-static inline void SekRunM68k(int cyc)
+static __inline void SekRunM68k(int cyc)
 {
-  SekCycleAim += cyc;
-  cyc = SekCycleAim - SekCycleCnt;
+  Pico.t.m68c_aim += cyc;
+  cyc = Pico.t.m68c_aim - Pico.t.m68c_cnt;
   if (cyc <= 0)
     return;
-  SekCycleCnt += cyc >> 6; // refresh slowdowns
+  Pico.t.m68c_cnt += cyc >> 6; // refresh slowdowns
   SekSyncM68k();
 }
 
@@ -108,7 +108,7 @@ static int PicoFrameHints(void)
   }
   else skip=PicoSkipFrame;
 
-  timing.m68c_frame_start = SekCyclesDone();
+  Pico.t.m68c_frame_start = Pico.t.m68c_aim;
   pv->v_counter = Pico.m.scanline = 0;
   z80_resetCycles();
   PsndStartFrame();
@@ -170,7 +170,7 @@ static int PicoFrameHints(void)
     }
 
     // Run scanline:
-    line_base_cycles = SekCyclesDone();
+    Pico.t.m68c_line_start = Pico.t.m68c_aim;
     do_timing_hacks_as(pv, vdp_slots);
     CPUS_RUN(CYCLES_M68K_LINE);
 
@@ -205,18 +205,21 @@ static int PicoFrameHints(void)
     do_hint(pv);
   }
 
-  pv->status |= SR_VB; // go into vblank
-  pv->pending_ints |= 0x20;
+  pv->status |= SR_VB | PVS_VB2; // go into vblank
 
   // the following SekRun is there for several reasons:
   // there must be a delay after vblank bit is set and irq is asserted (Mazin Saga)
   // also delay between F bit (bit 7) is set in SR and IRQ happens (Ex-Mutants)
   // also delay between last H-int and V-int (Golden Axe 3)
-  line_base_cycles = SekCyclesDone();
+  Pico.t.m68c_line_start = Pico.t.m68c_aim;
   do_timing_hacks_vb();
   CPUS_RUN(CYCLES_M68K_VINT_LAG);
 
+  pv->status |= SR_F;
+  pv->pending_ints |= 0x20;
   if (pv->reg[1] & 0x20) {
+    Pico.t.m68c_aim = Pico.t.m68c_cnt + 11; // HACK
+    SekSyncM68k();
     elprintf(EL_INTS, "vint: @ %06x [%u]", SekPc, SekCyclesDone());
     SekInterrupt(6);
   }
@@ -276,7 +279,7 @@ static int PicoFrameHints(void)
     }
 
     // Run scanline:
-    line_base_cycles = SekCyclesDone();
+    Pico.t.m68c_line_start = Pico.t.m68c_aim;
     do_timing_hacks_vb();
     CPUS_RUN(CYCLES_M68K_LINE);
 
@@ -284,7 +287,8 @@ static int PicoFrameHints(void)
     pevt_log_m68k_o(EVT_NEXT_LINE);
   }
 
-  pv->status &= ~SR_VB;
+  pv->status &= ~(SR_VB | PVS_VB2);
+  pv->status |= ((pv->reg[1] >> 3) ^ SR_VB) & SR_VB; // forced blanking
 
   // last scanline
   Pico.m.scanline = y;
@@ -300,7 +304,7 @@ static int PicoFrameHints(void)
   }
 
   // Run scanline:
-  line_base_cycles = SekCyclesDone();
+  Pico.t.m68c_line_start = Pico.t.m68c_aim;
   do_timing_hacks_as(pv, vdp_slots);
   CPUS_RUN(CYCLES_M68K_LINE);