From e71680d5d5a8c60880f646c8b335ab67b709b4e1 Mon Sep 17 00:00:00 2001 From: notaz Date: Tue, 27 Jun 2023 20:59:12 +0300 Subject: [PATCH] testpico: more timing tests --- testpico/asmtools.S | 132 ++++++++++++++++++++++++- testpico/asmtools.h | 3 + testpico/hcnt2linear.c | 46 +++++++++ testpico/main.c | 212 +++++++++++++++++++++++++++++++++++++---- testpico/z80_test.s80 | 168 ++++++++++++++++++++++++++++---- 5 files changed, 522 insertions(+), 39 deletions(-) create mode 100644 testpico/hcnt2linear.c diff --git a/testpico/asmtools.S b/testpico/asmtools.S index 811f35d..807ac9a 100644 --- a/testpico/asmtools.S +++ b/testpico/asmtools.S @@ -1,5 +1,6 @@ # Assemble with gas # --register-prefix-optional --bitwise-or +# reminder: d2-d7/a2-a6 are callee-save .macro ldarg arg, stacksz, reg move.l (4 + \arg * 4 + \stacksz)(%sp), \reg @@ -40,7 +41,7 @@ write16_x16: # read single phase from controller # d0 - result -# destroys d1,d2 +# destroys d1 .global get_input get_input: move.b #0x40,(0xa10003) @@ -195,6 +196,36 @@ test_vcnt_vb: movem.l (sp)+, d2-d7/a2 rts +.global test_vcnt_loops +test_vcnt_loops: + movem.l d2, -(sp) + movea.l #0xc00007, a0 + movea.l #0xfff000, a1 + move.b #0xff, d0 /* d0 = current_vcnt */ + moveq.l #0, d1 /* d1 = loop counter */ + move.w #315-1, d2 /* d2 = line limit */ +0: + btst #3, (a0) + beq 0b /* not blanking */ +0: + btst #3, (a0) + bne 0b /* blanking */ + + addq.w #1, a0 +0: + addq.w #1, d1 /* 4 */ + cmp.b (a0), d0 /* 8 vcnt changed? */ + beq 0b /* 10 */ + + move.w d0, (a1)+ /* 8 save */ + move.w d1, (a1)+ + move.b (a0), d0 /* 8 new vcnt */ + moveq.l #0, d1 + dbra d2, 0b + + movem.l (sp)+, d2 + rts + .global test_hint test_hint: move.w d0, -(sp) /* 8 */ @@ -378,4 +409,103 @@ test_hb: movem.l (sp)+, d2-d7 rts +.macro ymwrite areg, dreg addr dat + move.b \addr, (\areg) /* 12 addr */ + nbcd d0 /* 6 delay to reach 17 ym cycles (M/7) */ + move.b \dat, (\dreg) /* 12 data */ +.endm + +.global test_ym_stopped_tick +test_ym_stopped_tick: + movem.l a2-a3, -(sp) + movea.l #0xa04000, a0 + movea.l #0xa04001, a1 + movea.l #0xc00007, a2 + movea.l #0xfff000, a3 + + ymwrite a0, a1, #0x27, #0x30 /* 30 disable, clear */ + ymwrite a0, a1, #0x26, #0xff /* 30 timer b shortest interval */ + move.b #0x27, (a0) /* 12 addr prep */ +0: + btst #3, (a2) + beq 0b /* not blanking */ +0: + btst #3, (a2) + bne 0b /* blanking */ + + addq.l #1, a2 +0: + tst.b (a2) + bne 0b /* not line 0 - waiting for sequential vcnt */ + + move.b #0x0a, (a1) /* 12 start timer b */ + moveq.l #0, d0 + moveq.l #2, d1 +0: + move.b (a0), d0 + and.b d1, d0 + beq 0b +0: +# move.w (a2), (a3)+ /* 12 save hvcnt */ + move.b (a2), d0 + cmp.b (a2), d0 + bne 0b + move.w d0, (a3)+ + move.b #0x30, (a1) /* 12 stop b, clear */ + + move.w #(1900/10-1), d0 /* waste cycles */ +0: + dbra d0, 0b + moveq.l #0, d0 + + move.w (a0), (a3)+ /* 12 save status */ + move.b #0x0a, (a1) /* 12 start b */ +0: + move.b (a0), d0 + and.b d1, d0 + beq 0b + +0: +# move.w (a2), (a3)+ /* 12 save hvcnt */ + move.b (a2), d1 + cmp.b (a2), d1 + bne 0b + move.w d1, (a3)+ + move.w d0, (a3)+ /* 12 save status */ + + movem.l (sp)+, a2-a3 + rts + +.global test_ym_ab_sync +test_ym_ab_sync: + movea.l #0xa04000, a0 + movea.l #0xa04001, a1 + + ymwrite a0, a1, #0x27, #0x30 /* 30 disable, clear */ + ymwrite a0, a1, #0x24, #0xfc /* 30 timer a */ + ymwrite a0, a1, #0x25, #0x01 /* 30 =15 - why 15? expected 16 */ + ymwrite a0, a1, #0x26, #0xff /* 30 timer b shortest interval */ + move.b #0x27, (a0) /* 12 addr prep */ + nop + nop + + move.b #0x0a, (a1) /* 12 start timer b */ + moveq.l #0, d0 + moveq.l #2, d1 +0: + move.b (a0), d0 /* 8 */ + and.b d1, d0 /* 4 */ + beq 0b /* 10|8 */ +0: + move.b #0x3f, (a1) /* 12 start a, clear */ + moveq.l #3, d1 /* 12 cycles for old flag to clear itself */ + nop + nop +0: + move.b (a0), d0 + and.b d1, d0 + beq 0b + move.b (a0), d0 /* re-read, else very occasionally get 1 */ + rts + # vim:filetype=asmM68k:ts=4:sw=4:expandtab diff --git a/testpico/asmtools.h b/testpico/asmtools.h index 63974f8..8711183 100644 --- a/testpico/asmtools.h +++ b/testpico/asmtools.h @@ -20,10 +20,13 @@ void memcpy_(void *dst, const void *src, unsigned short size); void memset_(void *dst, int d, unsigned short size); void test_vcnt_vb(void); +void test_vcnt_loops(void); void test_f(void); void test_hb(void); void test_v_h_2(void); void test_h_v_2(void); +void test_ym_stopped_tick(void); +short test_ym_ab_sync(void); extern const char test_hint[]; extern const char test_hint_end[]; diff --git a/testpico/hcnt2linear.c b/testpico/hcnt2linear.c new file mode 100644 index 0000000..5f4c708 --- /dev/null +++ b/testpico/hcnt2linear.c @@ -0,0 +1,46 @@ +#include +#include + +//| Mode |H32 (RSx=00) |H40 (RSx=11) | +//|HCounter |[1]0x000-0x127 |[1]0x000-0x16C | 00-93 00-b6 +//|progression |[2]0x1D2-0x1FF |[2]0x1C9-0x1FF | e9-ff e4-ff + +int main() +{ + unsigned char result[256]; + int i, j, val, vals[420]; + + for (i = val = 0; val < 0x200; i++) + { + vals[i] = val++; + if (val == 0x16d) + val = 0x1C9; + } + assert(i == 420); + for (i = 0; i < 256; i++) + { + result[i] = 0; + for (j = 0; j < 420; j++) + if (vals[j] / 2 == i) + break; + if (j < 420) + result[i] = (255 * j + 210) / 419; + } + + printf("{"); + for (i = 0; i < 256; i++) + printf(" 0x%02x%s", result[i], i < 255 ? "," : ""); + printf(" }\n"); + + printf("{"); + for (i = 0; i < 64; i++) + printf(" 0x%02x%s", result[i*4+2], i < 63 ? "," : ""); + printf(" }\n"); + + printf("{"); + for (i = 0; i < 16; i++) + printf(" 0x%02x%s", result[i*16+8], i < 15 ? "," : ""); + printf(" }\n"); + + return 0; +} diff --git a/testpico/main.c b/testpico/main.c index 4202748..d7ed087 100644 --- a/testpico/main.c +++ b/testpico/main.c @@ -438,22 +438,22 @@ static void t_dma_zero_fill_early(void) } #define expect(ok_, v0_, v1_) \ -if ((v0_) != (v1_)) { \ +do { if ((v0_) != (v1_)) { \ printf("%s: %08x %08x\n", #v0_, v0_, v1_); \ ok_ = 0; \ -} +}} while (0) #define expect_range(ok_, v0_, vmin_, vmax_) \ -if ((v0_) < (vmin_) || (v0_) > (vmax_)) { \ +do { if ((v0_) < (vmin_) || (v0_) > (vmax_)) { \ printf("%s: %02x /%02x-%02x\n", #v0_, v0_, vmin_, vmax_); \ ok_ = 0; \ -} +}} while (0) #define expect_bits(ok_, v0_, val_, mask_) \ -if (((v0_) & (mask_)) != (val_)) { \ +do { if (((v0_) & (mask_)) != (val_)) { \ printf("%s: %04x & %04x != %04x\n", #v0_, v0_, mask_, val_); \ ok_ = 0; \ -} +}} while (0) static int t_dma_zero_wrap(void) { @@ -968,7 +968,11 @@ static int t_z80mem_noreq_w(void) return ok; } -#define Z80_CP_CYCLES(b) (118 + ((b) - 1) * 21 + 26 + 17) +#define Z80_C_DISPATCH 113 // see z80_test.s80 +#define Z80_C_END 17 +#define Z80_C_END_VCNT 67 + +#define Z80_CYLES_TEST1(b) (Z80_C_DISPATCH + ((b) - 1) * 21 + 26 + Z80_C_END) static int t_z80mem_vdp_r(void) { @@ -986,7 +990,7 @@ static int t_z80mem_vdp_r(void) zram[0x1100] = zram[0x1101] = zram[0x1102] = 0x5a; mem_barrier(); write16(0xa11100, 0x000); - burn10(Z80_CP_CYCLES(2) * 15 / 7 * 2 / 10); + burn10(Z80_CYLES_TEST1(2) * 15 / 7 / 10); write16(0xa11100, 0x100); while (read16(0xa11100) & 0x100) @@ -1018,7 +1022,7 @@ static unused int t_z80mem_vdp_w(void) zram[0x1101] = 0x66; mem_barrier(); write16(0xa11100, 0x000); - burn10(Z80_CP_CYCLES(2) * 15 / 7 * 2 / 10); + burn10(Z80_CYLES_TEST1(2) * 15 / 7 / 10); write16(0xa11100, 0x100); while (read16(0xa11100) & 0x100) @@ -1047,7 +1051,34 @@ static int t_tim_loop(void) return ok; } -#define Z80_RD_V_CYCLES(b) (132 + (b) * 38 + 50 + 17) +static int t_tim_z80_loop(void) +{ + u8 pal = read8(0xa10001) & 0x40; + u8 *zram = (u8 *)0xa00000; + u16 z80_loops = pal ? 3420*(313*2+1)/15/100 : 3420*(262*2+1)/15/100; // 2fr + 1ln + u16 _68k_loops = pal ? 3420*(313*2+1)/7/10 : 3420*(262*2+1)/7/10; + int ok = 1; + + zram[0x1000] = 3; // idle loop, save vcnt + write16_z80le(&zram[0x1002], 0); // src (unused) + write16_z80le(&zram[0x1004], 0x1100); // vcnt dst + write16_z80le(&zram[0x1006], z80_loops); // x100 cycles + zram[0x1100] = 0; + mem_barrier(); + + vdp_wait_for_line_0(); + write16(0xa11100, 0x000); + burn10(_68k_loops + (Z80_C_DISPATCH + Z80_C_END_VCNT) * 15 / 7 / 10); + + write16(0xa11100, 0x100); + while (read16(0xa11100) & 0x100) + ; + expect(ok, zram[0x1000], 0); + expect(ok, zram[0x1100], 1); + return ok; +} + +#define Z80_CYCLES_TEST2(b) (Z80_C_DISPATCH + (b) * 38 + Z80_C_END_VCNT) // 80 80 91 95-96 static void z80_read_loop(u8 *zram, u16 src) @@ -1063,7 +1094,7 @@ static void z80_read_loop(u8 *zram, u16 src) vdp_wait_for_line_0(); write16(0xa11100, 0x000); - burn10(Z80_RD_V_CYCLES(pairs) * 15 / 7 * 4 / 10); + burn10(Z80_CYCLES_TEST2(pairs) * 15 / 7 * 2 / 10); write16(0xa11100, 0x100); while (read16(0xa11100) & 0x100) @@ -1191,6 +1222,23 @@ static int t_tim_vcnt(void) return ok; } +static int t_tim_vcnt_loops(void) +{ + const u16 *ram16 = (u16 *)0xfff004; + u8 pal = read8(0xa10001) & 0x40; + u16 i, lines = pal ? 313 : 262; + int ok = 1; + + test_vcnt_loops(); + expect(ok, ram16[-1*2+0], 0xff); + expect_range(ok, ram16[-1*2+1], 21, 22); + for (i = 0; i < lines; i++) + expect_range(ok, ram16[i*2+1], 19, 21); + expect(ok, ram16[lines*2+0], 0); + expect_range(ok, ram16[lines*2+1], 20, 21); + return ok; +} + static int t_tim_hblank_h40(void) { const u8 *r = (u8 *)0xff0000; @@ -1260,6 +1308,113 @@ static int t_tim_vdp_as_cram_w(void) return ok; } +static const u8 hcnt2tm[] = +{ + 0x0a, 0x1d, 0x31, 0x44, 0x58, 0x6b, 0x7f, 0x92, + 0xa6, 0xb9, 0xcc, 0x00, 0x00, 0x00, 0xe2, 0xf6 +}; + +static int t_tim_ym_timer_z80(int is_b) +{ + u8 pal = read8(0xa10001) & 0x40; + u8 *zram = (u8 *)0xa00000; + u8 *z80 = zram; + u16 _68k_loops = 3420*(302+5+1)/7/10; // ~ (72*1024*2)/(3420./7) + u16 start, end, diff; + int ok = 1; + + zram[0x1000] = 4 + is_b; // ym2612 timer a/b test + zram[0x1100] = zram[0x1101] = zram[0x1102] = zram[0x1103] = 0; + mem_barrier(); + + vdp_wait_for_line_0(); + write16(0xa11100, 0x000); + + burn10(_68k_loops + (Z80_C_DISPATCH + Z80_C_END_VCNT) * 15 / 7 / 10); + + write16(0xa11100, 0x100); + while (read16(0xa11100) & 0x100) + ; + mem_barrier(); + expect(ok, zram[0x1000], 0); + (void)hcnt2tm; + //start = ((u16)zram[0x1102] << 8) | hcnt2tm[zram[0x1103] >> 4]; + //end = ((u16)zram[0x1100] << 8) | hcnt2tm[zram[0x1101] >> 4]; + start = zram[0x1102]; + end = zram[0x1100]; + diff = end - start; + if (pal) + expect_range(ok, diff, 0xf4, 0xf6); + else + expect_range(ok, diff, 0x27, 0x29); + write8(&z80[0x4001], 0); // stop, but should keep the flag + mem_barrier(); + burn10(32*6/10); // busy bit, 32 FM ticks (M/7/6) + if (is_b) { + expect(ok, z80[0x4000], 2); + write8(&z80[0x4001], 0x20); // reset flag (reg 0x27, set up by z80) + } + else { + expect(ok, z80[0x4000], 1); + write8(&z80[0x4001], 0x10); + } + mem_barrier(); + burn10(32*6/10); + expect(ok, z80[0x4000], 0); + return ok; +} + +static int t_tim_ym_timera_z80(void) +{ + return t_tim_ym_timer_z80(0); +} + +static int t_tim_ym_timerb_z80(void) +{ + return t_tim_ym_timer_z80(1); +} + +static int t_tim_ym_timerb_stop(void) +{ + const struct { + //u8 vcnt_start; + //u8 hcnt_start; + u16 vcnt_start; + u16 stat0; + //u8 vcnt_end; + //u8 hcnt_end; + u16 vcnt_end; + u16 stat1; + } *t = (void *)0xfff000; + u8 *z80 = (u8 *)0xa00000; + u16 diff; + int ok = 1; + write16(0xa11100, 0x100); + while (read16(0xa11100) & 0x100) + ; + test_ym_stopped_tick(); + mem_barrier(); + //start = ((u16)t->vcnt_start << 8) | hcnt2tm[t->hcnt_start >> 4]; + //end = ((u16)t->vcnt_end << 8) | hcnt2tm[t->hcnt_end >> 4]; + //diff = end - start; + diff = t->vcnt_end - t->vcnt_start; + //expect_range(ok, diff, 0x492, 0x5c2); // why so much variation? + expect_range(ok, diff, 4, 5); + expect(ok, t->stat0, 0); + expect(ok, t->stat1, 2); + expect(ok, z80[0x4000], 2); + write8(&z80[0x4001], 0x30); + return ok; +} + +static int t_tim_ym_timer_ab_sync(void) +{ + u16 v = test_ym_ab_sync(); + int ok = 1; + expect(ok, v, 3); + return ok; +} + struct irq_test { u16 cnt; union { @@ -1269,16 +1424,24 @@ struct irq_test { u16 pad; }; +// broken on fresh boot due to uknown reasons static int t_irq_hint(void) { struct irq_test *it = (void *)0xfff000; + struct irq_test *itv = it + 1; int ok = 1; + memset_(it, 0, sizeof(*it) * 2); + memcpy_((void *)0xff0100, test_hint, test_hint_end - test_hint); + memcpy_((void *)0xff0140, test_vint, test_vint_end - test_vint); + + // without this, tests fail after cold boot + while (!(read16(VDP_CTRL_PORT) & 8)) + /* not blanking */; + // for more fun, disable the display VDP_setReg(VDP_MODE2, VDP_MODE2_MD); - it->cnt = it->first.hv = it->last.hv = 0; - memcpy_((void *)0xff0100, test_hint, test_hint_end - test_hint); VDP_setReg(10, 0); while (read8(VDP_HV_COUNTER) != 100) ; @@ -1291,6 +1454,7 @@ static int t_irq_hint(void) move_sr(0x2700); expect(ok, it->first.v, 229); // pending irq trigger expect(ok, it->cnt, 1); + expect(ok, itv->cnt, 0); // count irqs it->cnt = it->first.hv = it->last.hv = 0; @@ -1791,15 +1955,21 @@ static const struct { { T_MD, t_z80mem_vdp_r, "z80 vdp read" }, // { t_z80mem_vdp_w, "z80 vdp write" }, // hang { T_MD, t_tim_loop, "time loop" }, + { T_MD, t_tim_z80_loop, "time z80 loop" }, { T_MD, t_tim_z80_ram, "time z80 ram" }, { T_MD, t_tim_z80_ym, "time z80 ym2612" }, { T_MD, t_tim_z80_vdp, "time z80 vdp" }, { T_MD, t_tim_z80_bank_rom, "time z80 bank rom" }, { T_MD, t_tim_vcnt, "time V counter" }, + { T_MD, t_tim_vcnt_loops, "time vcnt loops" }, { T_MD, t_tim_hblank_h40, "time hblank h40" }, { T_MD, t_tim_hblank_h32, "time hblank h32" }, { T_MD, t_tim_vdp_as_vram_w, "time vdp vram w" }, { T_MD, t_tim_vdp_as_cram_w, "time vdp cram w" }, + { T_MD, t_tim_ym_timera_z80, "time timer a z80" }, + { T_MD, t_tim_ym_timerb_z80, "time timer b z80" }, + { T_MD, t_tim_ym_timerb_stop, "timer b stop" }, + { T_MD, t_tim_ym_timer_ab_sync,"timer ab sync" }, { T_MD, t_irq_hint, "irq4 / line" }, { T_MD, t_irq_both_cpu_unmask, "irq both umask" }, { T_MD, t_irq_ack_v_h, "irq ack v-h" }, @@ -1844,7 +2014,8 @@ static void setup_z80(void) write16(0xa11100, 0x000); burn10(1); write16(0xa11200, 0x100); - burn10(1); + + burn10(50 * 15 / 7 / 10); // see z80_test.s80 // take back the bus write16(0xa11100, 0x100); @@ -1854,9 +2025,9 @@ static void setup_z80(void) static void wait_next_vsync(void) { - while (read16(VDP_CTRL_PORT) & 8) + while (read16(VDP_CTRL_PORT) & SR_VB) /* blanking */; - while (!(read16(VDP_CTRL_PORT) & 8)) + while (!(read16(VDP_CTRL_PORT) & SR_VB)) /* not blanking */; } @@ -1982,8 +2153,15 @@ int main() printf_ypos = 0; printf(" "); - while (!(get_input() & BTNM_A)) + for (i = 0; i < 60*60 && !(get_input() & BTNM_A); i++) wait_next_vsync(); +#ifndef PICO + // blank due to my lame tv being burn-in prone + VDP_setReg(VDP_MODE2, VDP_MODE2_MD); +#endif + while (!(get_input() & BTNM_A)) + burn10(488*100/10); + VDP_setReg(VDP_MODE2, VDP_MODE2_MD | VDP_MODE2_DMA | VDP_MODE2_DISP); { diff --git a/testpico/z80_test.s80 b/testpico/z80_test.s80 index 824d80c..5fbada1 100644 --- a/testpico/z80_test.s80 +++ b/testpico/z80_test.s80 @@ -1,26 +1,66 @@ +; for sjasm 0.42 ORG $0 init - di - im $1 - ld sp, $2000 + di ; 4 + im $1 ; 8 + +loop_prep + ld sp, $1002 ; 10 + ld hl, $1000 ; 10 + ld b, jtable ; 7 + ld d, $0 ; 7 + xor a ; 4 (50) loop - ld a, ($1000) ; 13 - or a ; 4 - jp z, loop ; 10 27 (41 worst) + add a, (hl) ; 7 + jp z, loop ; 10 17 (27 worst) - ld hl, ($1002) ; src 20 - ld de, ($1004) ; dst 20 - ld bc, ($1006) ; len 20 + add a ; 4 a *= 2 + add b ; 4 a += table + ld e, a ; 4 + ld a, (de) ; 7 + inc e ; 4 + ld ixl, a ; 9 + ld a, (de) ; 7 + ld ixh, a ; 9 + + pop hl ; src 10 ld hl, ($1002) + pop de ; dst 10 ld de, ($1004) + pop bc ; len 10 ld bc, ($1006) + jp ix ; 8 (86+27) + +end + xor a ; 4 + ld ($1000), a ; 13 (17) + jp loop_prep + +; --- + + BLOCK $38-$ - cp a, 2 ; 7 - jp z, rd_timing ; 10 77 (118) +irq + ret - ldir ; 21/16 +; --- + +jtable + dw end + dw t_copy + dw t_rd_timing + dw t_idle_loop + dw t_timer_a + dw t_timer_b +jtable_end + ld b, jtable_end ; ensure < $100 + +; - 1 - +t_copy + ldir ; 21/16 ((de) <- (hl)) bc times jp end ; 10 -rd_timing +; - 2 - +t_rd_timing ld d, h ; 4 ld e, l ; 4 inc de ; 6 14 (132) @@ -32,22 +72,108 @@ loop_read or a, c ; 4 jp nz,loop_read ; 10 38 +end_vcnt ld a, ($7f08) ; vcnt 13 ld de, ($1004) ; dst 20 ld (de), a ; 7 jp end ; 10 50 -; --- +; - 3 - +t_idle_loop + exx ; 4 (waste cycles) + ld b, $4 ; 7 +1 djnz 1b ; 13 13*3+8=47 + exx ; 4 + nop ; 4 (66) - BLOCK $38-$ + dec bc ; 6 + ld a, b ; 4 + or a, c ; 4 + jp z,end_vcnt ; 10 + jp t_idle_loop ; 10 (66+34) -irq - ret +; helper for tests 5 and 6 +macro ld_a 2 + ld a, @2 ; 7 + ld @1, a ; 7 +endmacro +macro save_hvcount_unstable dst +0 + ld bc, ($7f08) ; hvc 20 + ld hl, ($7f08) ; hvc 16 + ld a, b ; 4 + xor a, h ; 4 + and a, $c0 ; 7 hcnt bad sample? + jp nz,0b ; 10 (61 loop) + ld a, c ; 4 + xor a, l ; 4 vcnt changed while sampling? + jp nz,0b ; 10 (79 loop) + ld (dst), hl ; 20 (99) +endmacro +macro save_hvcount dst + ld hl, $7f08 ; vcnt 10 +0 + ld a, (hl) ; 7 + cp a, (hl) ; 7 + jp nz,0b ; 10 + ld (dst), a +endmacro +t_timer_prepare + ld d, $2 ; 7 + ld hl, $4000 ; addr 10 + ld bc, $4001 ; data 14 + ld (hl), $26 ; 10 + ld_a (bc), $ff ; 14 + ld (hl), $27 ; 10 + ld_a (bc), $3a ; 14 enable timer+flag,clear +0 + ld a, (hl) ; 7 + and d ; 4 + jp z,0b ; 10 + xor a ; 4 + ld (bc), a ; 7 stop (timer tick in (16*72*2)*7/15) + ld a, ($7f08) ; vcnt 13 + exx ; 4 + save_hvcount $1102 ; 99+ + exx ; 4 + ret ; 10 -; --- +; - 4 - +t_timer_a + ld sp, $2000 ; 10 + call t_timer_prepare ; 17++ + ld d, $1 ; 7 + xor a ; 4 + ld (hl), $24 ; 10 + ld (bc), a ; 7 + ld (hl), $25 ; 10 + ld (bc), a ; 7 + ld (hl), $27 ; 10 + ld_a (bc), $35 ; 14 enable timer+flag,clear ( max 67 + nop ; 4 flag clear delay +tim_a_loop + ld a, (hl) ; 7 + and d ; 4 + jp z,tim_a_loop ; 10 + save_hvcount $1100 ; 99+ + jp end ; 10 -end +; - 5 - +t_timer_b + ld sp, $2000 ; 10 copy-pasta from t_timer_a because I'm lazy + call t_timer_prepare ; 17++ + ld d, $2 ; 7 xor a ; 4 - ld ($1000), a ; 13 - jp loop ; 10 27 + ld (hl), $26 ; 10 + ld (hl), $26 ; 10 dup for timing + ld_a (bc), $c0 ; 14 + ld (hl), $27 ; 10 + ld_a (bc), $3a ; 14 enable timer+flag,clear + nop ; 4 flag clear delay +tim_b_loop + ld a, (hl) ; 7 + and d ; 4 + jp z,tim_b_loop ; 10 + save_hvcount $1100 ; 99+ + jp end ; 10 -- 2.39.5