[pcsx_rearmed.git] / plugins / dfsound / spu.c

/***************************************************************************
                            spu.c  -  description
                             -------------------
    begin                : Wed May 15 2002
    copyright            : (C) 2002 by Pete Bernert
    email                : BlackDove@addcom.de

 Portions (C) Gražvydas "notaz" Ignotas, 2010-2011

 ***************************************************************************/
/***************************************************************************
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License, or     *
 *   (at your option) any later version. See also the license.txt file for *
 *   additional informations.                                              *
 *                                                                         *
 ***************************************************************************/

#include "stdafx.h"

#define _IN_SPU

#include "externals.h"
#include "registers.h"
#include "cfg.h"
#include "dsoundoss.h"
#include "regs.h"

#ifdef ENABLE_NLS
#include <libintl.h>
#include <locale.h>
#define _(x)  gettext(x)
#define N_(x) (x)
#else
#define _(x)  (x)
#define N_(x) (x)
#endif

#ifdef __arm__
 #define ssat32_to_16(v) \
  asm("ssat %0,#16,%1" : "=r" (v) : "r" (v))
#else
 #define ssat32_to_16(v) do { \
  if (v < -32768) v = -32768; \
  else if (v > 32767) v = 32767; \
 } while (0)
#endif

/*
#if defined (USEMACOSX)
static char * libraryName     = N_("Mac OS X Sound");
#elif defined (USEALSA)
static char * libraryName     = N_("ALSA Sound");
#elif defined (USEOSS)
static char * libraryName     = N_("OSS Sound");
#elif defined (USESDL)
static char * libraryName     = N_("SDL Sound");
#elif defined (USEPULSEAUDIO)
static char * libraryName     = N_("PulseAudio Sound");
#else
static char * libraryName     = N_("NULL Sound");
#endif

static char * libraryInfo     = N_("P.E.Op.S. Sound Driver V1.7\nCoded by Pete Bernert and the P.E.Op.S. team\n");
*/

// globals

// psx buffer / addresses

unsigned short  regArea[10000];
unsigned short  spuMem[256*1024];
unsigned char * spuMemC;
unsigned char * pSpuIrq=0;
unsigned char * pSpuBuffer;
unsigned char * pMixIrq=0;

// user settings

int             iVolume=768; // 1024 is 1.0
int             iXAPitch=1;
int             iUseTimer=2;
int             iSPUIRQWait=1;
int             iDebugMode=0;
int             iRecordMode=0;
int             iUseReverb=2;
int             iUseInterpolation=2;

// MAIN infos struct for each channel

SPUCHAN         s_chan[MAXCHAN+1];                     // channel + 1 infos (1 is security for fmod handling)
REVERBInfo      rvb;

unsigned int    dwNoiseVal;                            // global noise generator
unsigned int    dwNoiseCount;
int             iSpuAsyncWait=0;

unsigned short  spuCtrl=0;                             // some vars to store psx reg infos
unsigned short  spuStat=0;
unsigned short  spuIrq=0;
unsigned long   spuAddr=0xffffffff;                    // address into spu mem
int             bEndThread=0;                          // thread handlers
int             bThreadEnded=0;
int             bSpuInit=0;
int             bSPUIsOpen=0;

static pthread_t thread = (pthread_t)-1;               // thread id (linux)

unsigned long dwNewChannel=0;                          // flags for faster testing, if new channel starts
unsigned long dwChannelOn=0;
unsigned long dwPendingChanOff=0;

void (CALLBACK *irqCallback)(void)=0;                  // func of main emu, called on spu irq
void (CALLBACK *cddavCallback)(unsigned short,unsigned short)=0;

// certain globals (were local before, but with the new timeproc I need em global)

static const int f[8][2] = {   {    0,  0  },
                        {   60,  0  },
                        {  115, -52 },
                        {   98, -55 },
                        {  122, -60 } };
int ChanBuf[NSSIZE+3];
int SSumLR[(NSSIZE+3)*2];
int iFMod[NSSIZE];
int iCycle = 0;
short * pS;

int lastch=-1;             // last channel processed on spu irq in timer mode
static int lastns=0;       // last ns pos
static int iSecureStart=0; // secure start counter

////////////////////////////////////////////////////////////////////////
// CODE AREA
////////////////////////////////////////////////////////////////////////

// dirty inline func includes

#include "reverb.c"
#include "adsr.c"

////////////////////////////////////////////////////////////////////////
// helpers for simple interpolation

//
// easy interpolation on upsampling, no special filter, just "Pete's common sense" tm
//
// instead of having n equal sample values in a row like:
//       ____
//           |____
//
// we compare the current delta change with the next delta change.
//
// if curr_delta is positive,
//
//  - and next delta is smaller (or changing direction):
//         \.
//          -__
//
//  - and next delta significant (at least twice) bigger:
//         --_
//            \.
//
//  - and next delta is nearly same:
//          \.
//           \.
//
//
// if curr_delta is negative,
//
//  - and next delta is smaller (or changing direction):
//          _--
//         /
//
//  - and next delta significant (at least twice) bigger:
//            /
//         __- 
//
//  - and next delta is nearly same:
//           /
//          /
//


INLINE void InterpolateUp(int ch)
{
 if(s_chan[ch].SB[32]==1)                              // flag == 1? calc step and set flag... and don't change the value in this pass
  {
   const int id1=s_chan[ch].SB[30]-s_chan[ch].SB[29];  // curr delta to next val
   const int id2=s_chan[ch].SB[31]-s_chan[ch].SB[30];  // and next delta to next-next val :)

   s_chan[ch].SB[32]=0;

   if(id1>0)                                           // curr delta positive
    {
     if(id2<id1)
      {s_chan[ch].SB[28]=id1;s_chan[ch].SB[32]=2;}
     else
     if(id2<(id1<<1))
      s_chan[ch].SB[28]=(id1*s_chan[ch].sinc)/0x10000L;
     else
      s_chan[ch].SB[28]=(id1*s_chan[ch].sinc)/0x20000L; 
    }
   else                                                // curr delta negative
    {
     if(id2>id1)
      {s_chan[ch].SB[28]=id1;s_chan[ch].SB[32]=2;}
     else
     if(id2>(id1<<1))
      s_chan[ch].SB[28]=(id1*s_chan[ch].sinc)/0x10000L;
     else
      s_chan[ch].SB[28]=(id1*s_chan[ch].sinc)/0x20000L; 
    }
  }
 else
 if(s_chan[ch].SB[32]==2)                              // flag 1: calc step and set flag... and don't change the value in this pass
  {
   s_chan[ch].SB[32]=0;

   s_chan[ch].SB[28]=(s_chan[ch].SB[28]*s_chan[ch].sinc)/0x20000L;
   if(s_chan[ch].sinc<=0x8000)
        s_chan[ch].SB[29]=s_chan[ch].SB[30]-(s_chan[ch].SB[28]*((0x10000/s_chan[ch].sinc)-1));
   else s_chan[ch].SB[29]+=s_chan[ch].SB[28];
  }
 else                                                  // no flags? add bigger val (if possible), calc smaller step, set flag1
  s_chan[ch].SB[29]+=s_chan[ch].SB[28];
}

//
// even easier interpolation on downsampling, also no special filter, again just "Pete's common sense" tm
//

INLINE void InterpolateDown(int ch)
{
 if(s_chan[ch].sinc>=0x20000L)                                 // we would skip at least one val?
  {
   s_chan[ch].SB[29]+=(s_chan[ch].SB[30]-s_chan[ch].SB[29])/2; // add easy weight
   if(s_chan[ch].sinc>=0x30000L)                               // we would skip even more vals?
    s_chan[ch].SB[29]+=(s_chan[ch].SB[31]-s_chan[ch].SB[30])/2;// add additional next weight
  }
}

////////////////////////////////////////////////////////////////////////
// helpers for gauss interpolation

#define gval0 (((short*)(&s_chan[ch].SB[29]))[gpos])
#define gval(x) (((short*)(&s_chan[ch].SB[29]))[(gpos+x)&3])

#include "gauss_i.h"

////////////////////////////////////////////////////////////////////////

#include "xa.c"

////////////////////////////////////////////////////////////////////////
// START SOUND... called by main thread to setup a new sound on a channel
////////////////////////////////////////////////////////////////////////

INLINE void StartSound(int ch)
{
 StartADSR(ch);
 StartREVERB(ch);

 // fussy timing issues - do in VoiceOn
 //s_chan[ch].pCurr=s_chan[ch].pStart;                   // set sample start
 //s_chan[ch].bStop=0;
 //s_chan[ch].bOn=1;

 s_chan[ch].SB[26]=0;                                  // init mixing vars
 s_chan[ch].SB[27]=0;
 s_chan[ch].iSBPos=28;

 s_chan[ch].SB[29]=0;                                  // init our interpolation helpers
 s_chan[ch].SB[30]=0;

 if(iUseInterpolation>=2)                              // gauss interpolation?
      {s_chan[ch].spos=0x30000L;s_chan[ch].SB[28]=0;}  // -> start with more decoding
 else {s_chan[ch].spos=0x10000L;s_chan[ch].SB[31]=0;}  // -> no/simple interpolation starts with one 44100 decoding

 dwNewChannel&=~(1<<ch);                               // clear new channel bit
}

////////////////////////////////////////////////////////////////////////
// ALL KIND OF HELPERS
////////////////////////////////////////////////////////////////////////

INLINE void VoiceChangeFrequency(int ch)
{
 s_chan[ch].iUsedFreq=s_chan[ch].iActFreq;             // -> take it and calc steps
 s_chan[ch].sinc=s_chan[ch].iRawPitch<<4;
 if(!s_chan[ch].sinc) s_chan[ch].sinc=1;
 if(iUseInterpolation==1) s_chan[ch].SB[32]=1;         // -> freq change in simle imterpolation mode: set flag
}

////////////////////////////////////////////////////////////////////////

INLINE int FModChangeFrequency(int ch,int ns)
{
 int NP=s_chan[ch].iRawPitch;
 int sinc;

 NP=((32768L+iFMod[ns])*NP)/32768L;

 if(NP>0x3fff) NP=0x3fff;
 if(NP<0x1)    NP=0x1;

 NP=(44100L*NP)/(4096L);                               // calc frequency

 s_chan[ch].iActFreq=NP;
 s_chan[ch].iUsedFreq=NP;
 sinc=(((NP/10)<<16)/4410);
 if(!sinc) sinc=1;
 if(iUseInterpolation==1)                              // freq change in simple interpolation mode
  s_chan[ch].SB[32]=1;
 iFMod[ns]=0;

 return sinc;
}                    

////////////////////////////////////////////////////////////////////////

INLINE void StoreInterpolationVal(int ch,int fa)
{
 if(s_chan[ch].bFMod==2)                               // fmod freq channel
  s_chan[ch].SB[29]=fa;
 else
  {
   ssat32_to_16(fa);

   if(iUseInterpolation>=2)                            // gauss/cubic interpolation
    {     
     int gpos = s_chan[ch].SB[28];
     gval0 = fa;          
     gpos = (gpos+1) & 3;
     s_chan[ch].SB[28] = gpos;
    }
   else
   if(iUseInterpolation==1)                            // simple interpolation
    {
     s_chan[ch].SB[28] = 0;                    
     s_chan[ch].SB[29] = s_chan[ch].SB[30];            // -> helpers for simple linear interpolation: delay real val for two slots, and calc the two deltas, for a 'look at the future behaviour'
     s_chan[ch].SB[30] = s_chan[ch].SB[31];
     s_chan[ch].SB[31] = fa;
     s_chan[ch].SB[32] = 1;                            // -> flag: calc new interolation
    }
   else s_chan[ch].SB[29]=fa;                          // no interpolation
  }
}

////////////////////////////////////////////////////////////////////////

INLINE int iGetInterpolationVal(int ch)
{
 int fa;

 if(s_chan[ch].bFMod==2) return s_chan[ch].SB[29];

 switch(iUseInterpolation)
  {   
   //--------------------------------------------------//
   case 3:                                             // cubic interpolation
    {
     long xd;int gpos;
     xd = ((s_chan[ch].spos) >> 1)+1;
     gpos = s_chan[ch].SB[28];

     fa  = gval(3) - 3*gval(2) + 3*gval(1) - gval0;
     fa *= (xd - (2<<15)) / 6;
     fa >>= 15;
     fa += gval(2) - gval(1) - gval(1) + gval0;
     fa *= (xd - (1<<15)) >> 1;
     fa >>= 15;
     fa += gval(1) - gval0;
     fa *= xd;
     fa >>= 15;
     fa = fa + gval0;

    } break;
   //--------------------------------------------------//
   case 2:                                             // gauss interpolation
    {
     int vl, vr;int gpos;
     vl = (s_chan[ch].spos >> 6) & ~3;
     gpos = s_chan[ch].SB[28];
     vr=(gauss[vl]*gval0)&~2047;
     vr+=(gauss[vl+1]*gval(1))&~2047;
     vr+=(gauss[vl+2]*gval(2))&~2047;
     vr+=(gauss[vl+3]*gval(3))&~2047;
     fa = vr>>11;
    } break;
   //--------------------------------------------------//
   case 1:                                             // simple interpolation
    {
     if(s_chan[ch].sinc<0x10000L)                      // -> upsampling?
          InterpolateUp(ch);                           // --> interpolate up
     else InterpolateDown(ch);                         // --> else down
     fa=s_chan[ch].SB[29];
    } break;
   //--------------------------------------------------//
   default:                                            // no interpolation
    {
     fa=s_chan[ch].SB[29];                  
    } break;
   //--------------------------------------------------//
  }

 return fa;
}

static void do_irq(void)
{
 if(!(spuStat & STAT_IRQ))
 {
  spuStat |= STAT_IRQ;
  if(irqCallback) irqCallback();
 }
}

static void decode_block_data(int *dest, const unsigned char *src, int predict_nr, int shift_factor)
{
 int nSample;
 int fa, s_1, s_2, d, s;

 s_1 = dest[27];
 s_2 = dest[26];

 for (nSample = 0; nSample < 28; src++)
 {
  d = (int)*src;
  s = (int)(signed short)((d & 0x0f) << 12);

  fa = s >> shift_factor;
  fa += ((s_1 * f[predict_nr][0])>>6) + ((s_2 * f[predict_nr][1])>>6);
  s_2=s_1;s_1=fa;

  dest[nSample++] = fa;

  s = (int)(signed short)((d & 0xf0) << 8);
  fa = s >> shift_factor;
  fa += ((s_1 * f[predict_nr][0])>>6) + ((s_2 * f[predict_nr][1])>>6);
  s_2=s_1;s_1=fa;

  dest[nSample++] = fa;
 }
}

static int decode_block(int ch)
{
 unsigned char *start;
 int predict_nr,shift_factor,flags;
 int ret = 0;

 start=s_chan[ch].pCurr;                   // set up the current pos
 if(start == (unsigned char*)-1 ||         // special "stop" sign
    (dwPendingChanOff&(1<<ch)))
 {
  dwChannelOn&=~(1<<ch);                   // -> turn everything off
  dwPendingChanOff&=~(1<<ch);
  s_chan[ch].bStop=1;
  s_chan[ch].ADSRX.EnvelopeVol=0;
  return 0;                                // -> and done for this channel
 }

 //////////////////////////////////////////// irq check

 if(spuCtrl&CTRL_IRQ)
 {
  if(pSpuIrq == start)                     // irq address reached?
  {
   do_irq();                               // -> call main emu
   ret = 1;
  }
 }

 predict_nr=(int)start[0];
 shift_factor=predict_nr&0xf;
 predict_nr >>= 4;

 decode_block_data(s_chan[ch].SB, start + 2, predict_nr, shift_factor);

 //////////////////////////////////////////// flag handler

 flags=(int)start[1];
 if(flags&4)
  s_chan[ch].pLoop=start;                  // loop adress

 start+=16;
 if(flags&1)                               // 1: stop/loop
 {
  if(!(flags&2))
   dwPendingChanOff|=1<<ch;

  start = s_chan[ch].pLoop;
 }

 if (start - spuMemC >= 0x80000)
  start = (unsigned char*)-1;

 s_chan[ch].pCurr = start;                 // store values for next cycle

 return ret;
}

// do block, but ignore sample data
static int skip_block(int ch)
{
 unsigned char *start = s_chan[ch].pCurr;
 int flags = start[1];
 int ret = 0;

 // Tron Bonne hack, probably wrong (could be wrong memory contents..)
 if(flags & ~7) flags = 0;

 if(start == pSpuIrq)
 {
  do_irq();
  ret = 1;
 }

 if(flags & 4)
  s_chan[ch].pLoop=start;

 s_chan[ch].pCurr += 16;

 if(flags & 1)
  s_chan[ch].pCurr = s_chan[ch].pLoop;

 return ret;
}

#define make_do_samples(name, fmod_code, interp_start, interp1_code, interp2_code, interp_end) \
static int do_samples_##name(int ch, int ns, int ns_to) \
{                                            \
 int sinc = s_chan[ch].sinc;                 \
 int spos = s_chan[ch].spos;                 \
 int sbpos = s_chan[ch].iSBPos;              \
 int *SB = s_chan[ch].SB;                    \
 int ret = -1;                               \
 int d, fa;                                  \
 interp_start;                               \
                                             \
 for (; ns < ns_to; ns++)                    \
 {                                           \
  fmod_code;                                 \
                                             \
  while (spos >= 0x10000)                    \
  {                                          \
   if(sbpos == 28)                           \
   {                                         \
    sbpos = 0;                               \
    d = decode_block(ch);                    \
    if(d && iSPUIRQWait)                     \
    {                                        \
     ret = ns;                               \
     goto out;                               \
    }                                        \
   }                                         \
                                             \
   fa = SB[sbpos++];                         \
   interp1_code;                             \
   spos -= 0x10000;                          \
  }                                          \
                                             \
  interp2_code;                              \
  spos += sinc;                              \
 }                                           \
                                             \
out:                                         \
 s_chan[ch].sinc = sinc;                     \
 s_chan[ch].spos = spos;                     \
 s_chan[ch].iSBPos = sbpos;                  \
 interp_end;                                 \
                                             \
 return ret;                                 \
}

#define fmod_recv_check \
  if(s_chan[ch].bFMod==1 && iFMod[ns]) \
    sinc = FModChangeFrequency(ch,ns)

make_do_samples(default, fmod_recv_check, ,
  StoreInterpolationVal(ch, fa),
  ChanBuf[ns] = iGetInterpolationVal(ch), )
make_do_samples(noint, , fa = s_chan[ch].SB[29], , ChanBuf[ns] = fa, s_chan[ch].SB[29] = fa)

#define simple_interp_store \
  s_chan[ch].SB[28] = 0; \
  s_chan[ch].SB[29] = s_chan[ch].SB[30]; \
  s_chan[ch].SB[30] = s_chan[ch].SB[31]; \
  s_chan[ch].SB[31] = fa; \
  s_chan[ch].SB[32] = 1

#define simple_interp_get \
  if(sinc<0x10000)          /* -> upsampling? */ \
       InterpolateUp(ch);   /* --> interpolate up */ \
  else InterpolateDown(ch); /* --> else down */ \
  ChanBuf[ns] = s_chan[ch].SB[29]

make_do_samples(simple, , ,
  simple_interp_store, simple_interp_get, )

static int do_samples_noise(int ch, int ns, int ns_to)
{
 int level, shift, bit;

 s_chan[ch].spos += s_chan[ch].sinc * (ns_to - ns);
 while (s_chan[ch].spos >= 28*0x10000)
 {
  skip_block(ch);
  s_chan[ch].spos -= 28*0x10000;
 }

 // modified from DrHell/shalma, no fraction
 level = (spuCtrl >> 10) & 0x0f;
 level = 0x8000 >> level;

 for (; ns < ns_to; ns++)
 {
  dwNoiseCount += 2;
  if (dwNoiseCount >= level)
  {
   dwNoiseCount -= level;
   shift = (dwNoiseVal >> 10) & 0x1f;
   bit = (0x69696969 >> shift) & 1;
   if (dwNoiseVal & 0x8000)
    bit ^= 1;
   dwNoiseVal = (dwNoiseVal << 1) | bit;
  }

  ChanBuf[ns] = (signed short)dwNoiseVal;
 }

 return -1;
}

#ifdef __arm__
// asm code
extern void mix_chan(int start, int count, int lv, int rv);
extern void mix_chan_rvb(int start, int count, int lv, int rv);
#else
static void mix_chan(int start, int count, int lv, int rv)
{
 int *dst = SSumLR + start * 2;
 const int *src = ChanBuf + start;
 int l, r;

 while (count--)
  {
   int sval = *src++;

   l = (sval * lv) >> 14;
   r = (sval * rv) >> 14;
   *dst++ += l;
   *dst++ += r;
  }
}

static void mix_chan_rvb(int start, int count, int lv, int rv)
{
 int *dst = SSumLR + start * 2;
 int *drvb = sRVBStart + start * 2;
 const int *src = ChanBuf + start;
 int l, r;

 while (count--)
  {
   int sval = *src++;

   l = (sval * lv) >> 14;
   r = (sval * rv) >> 14;
   *dst++ += l;
   *dst++ += r;
   *drvb++ += l;
   *drvb++ += r;
  }
}
#endif

////////////////////////////////////////////////////////////////////////
// MAIN SPU FUNCTION
// here is the main job handler... thread, timer or direct func call
// basically the whole sound processing is done in this fat func!
////////////////////////////////////////////////////////////////////////

// 5 ms waiting phase, if buffer is full and no new sound has to get started
// .. can be made smaller (smallest val: 1 ms), but bigger waits give
// better performance

#define PAUSE_W 5
#define PAUSE_L 5000

////////////////////////////////////////////////////////////////////////

static void *MAINThread(void *arg)
{
 int volmult = iVolume;
 int ns,ns_from,ns_to;
 int ch,d;
 int bIRQReturn=0;

 while(!bEndThread)                                    // until we are shutting down
  {
   // ok, at the beginning we are looking if there is
   // enuff free place in the dsound/oss buffer to
   // fill in new data, or if there is a new channel to start.
   // if not, we wait (thread) or return (timer/spuasync)
   // until enuff free place is available/a new channel gets
   // started

   if(dwNewChannel)                                    // new channel should start immedately?
    {                                                  // (at least one bit 0 ... MAXCHANNEL is set?)
     iSecureStart++;                                   // -> set iSecure
     if(iSecureStart>5) iSecureStart=0;                //    (if it is set 5 times - that means on 5 tries a new samples has been started - in a row, we will reset it, to give the sound update a chance)
    }
   else iSecureStart=0;                                // 0: no new channel should start

   while(!iSecureStart && !bEndThread &&               // no new start? no thread end?
         (SoundGetBytesBuffered()>TESTSIZE))           // and still enuff data in sound buffer?
    {
     iSecureStart=0;                                   // reset secure

     if(iUseTimer) return 0;                           // linux no-thread mode? bye
     usleep(PAUSE_L);                                  // else sleep for x ms (linux)

     if(dwNewChannel) iSecureStart=1;                  // if a new channel kicks in (or, of course, sound buffer runs low), we will leave the loop
    }

   //--------------------------------------------------// continue from irq handling in timer mode? 

   ns_from=0;
   ns_to=NSSIZE;
   ch=0;
   if(lastch>=0)                                       // will be -1 if no continue is pending
    {
     ch=lastch; ns_from=lastns; lastch=-1;             // -> setup all kind of vars to continue
    }

   //--------------------------------------------------//
   //- main channel loop                              -// 
   //--------------------------------------------------//
    {
     for(;ch<MAXCHAN;ch++)                             // loop em all... we will collect 1 ms of sound of each playing channel
      {
       if(dwNewChannel&(1<<ch)) StartSound(ch);        // start new sound
       if(!(dwChannelOn&(1<<ch))) continue;            // channel not playing? next

       if(s_chan[ch].iActFreq!=s_chan[ch].iUsedFreq)   // new psx frequency?
        VoiceChangeFrequency(ch);

       if(s_chan[ch].bNoise)
        d=do_samples_noise(ch, ns_from, ns_to);
       else if(s_chan[ch].bFMod==2 || (s_chan[ch].bFMod==0 && iUseInterpolation==0))
        d=do_samples_noint(ch, ns_from, ns_to);
       else if(s_chan[ch].bFMod==0 && iUseInterpolation==1)
        d=do_samples_simple(ch, ns_from, ns_to);
       else
        d=do_samples_default(ch, ns_from, ns_to);
       if(d>=0)
        {
         bIRQReturn=1;
         lastch=ch; 
         lastns=ns_to=d;
        }

       MixADSR(ch, ns_from, ns_to);

       if(s_chan[ch].bFMod==2)                         // fmod freq channel
        memcpy(iFMod, ChanBuf, sizeof(iFMod));
       else if(s_chan[ch].bRVBActive)
        mix_chan_rvb(ns_from,ns_to-ns_from,s_chan[ch].iLeftVolume,s_chan[ch].iRightVolume);
       else
        mix_chan(ns_from,ns_to-ns_from,s_chan[ch].iLeftVolume,s_chan[ch].iRightVolume);
      }
    }

    // advance "stopped" channels that can cause irqs
    // (all chans are always playing on the real thing..)
    if(!bIRQReturn && (spuCtrl&CTRL_IRQ))
     for(ch=0;ch<MAXCHAN;ch++)
      {
       if(dwChannelOn&(1<<ch)) continue;               // already handled
       if(s_chan[ch].pCurr == (unsigned char *)-1)
        continue;
       if(s_chan[ch].pCurr > pSpuIrq && s_chan[ch].pLoop > pSpuIrq)
        continue;

       if(s_chan[ch].iActFreq!=s_chan[ch].iUsedFreq)   // new psx frequency?
         VoiceChangeFrequency(ch);

       s_chan[ch].spos += s_chan[ch].sinc * NSSIZE;
       while(s_chan[ch].spos >= 28 * 0x10000)
        {
         unsigned char *start=s_chan[ch].pCurr;

         bIRQReturn |= skip_block(ch);
         if(start == s_chan[ch].pCurr)
          {
           // looping on self
           s_chan[ch].pCurr=(unsigned char *)-1;
           break;
          }

         s_chan[ch].spos -= 28 * 0x10000;
        }
      }

    if(bIRQReturn && iSPUIRQWait)                      // special return for "spu irq - wait for cpu action"
     {
      iSpuAsyncWait=1;
      bIRQReturn=0;
      if(iUseTimer!=2)
       { 
        DWORD dwWatchTime=timeGetTime_spu()+2500;

        while(iSpuAsyncWait && !bEndThread && 
              timeGetTime_spu()<dwWatchTime)
            usleep(1000L);
	continue;
       }
      else
       {
        return 0;
       }
     }


  //---------------------------------------------------//
  //- here we have another 1 ms of sound data
  //---------------------------------------------------//
  // mix XA infos (if any)

  MixXA();
  
  ///////////////////////////////////////////////////////
  // mix all channels (including reverb) into one buffer

  if(iUseReverb)
   REVERBDo();

  if((spuCtrl&0x4000)==0) // muted? (rare, don't optimize for this)
   {
    memset(pS, 0, NSSIZE * 2 * sizeof(pS[0]));
    pS += NSSIZE*2;
   }
  else
  for (ns = 0; ns < NSSIZE*2; )
   {
    d = SSumLR[ns]; SSumLR[ns] = 0;
    d = d * volmult >> 10;
    ssat32_to_16(d);
    *pS++ = d;
    ns++;

    d = SSumLR[ns]; SSumLR[ns] = 0;
    d = d * volmult >> 10;
    ssat32_to_16(d);
    *pS++ = d;
    ns++;
   }

  //////////////////////////////////////////////////////                   
  // special irq handling in the decode buffers (0x0000-0x1000)
  // we know: 
  // the decode buffers are located in spu memory in the following way:
  // 0x0000-0x03ff  CD audio left
  // 0x0400-0x07ff  CD audio right
  // 0x0800-0x0bff  Voice 1
  // 0x0c00-0x0fff  Voice 3
  // and decoded data is 16 bit for one sample
  // we assume: 
  // even if voices 1/3 are off or no cd audio is playing, the internal
  // play positions will move on and wrap after 0x400 bytes.
  // Therefore: we just need a pointer from spumem+0 to spumem+3ff, and 
  // increase this pointer on each sample by 2 bytes. If this pointer
  // (or 0x400 offsets of this pointer) hits the spuirq address, we generate
  // an IRQ. Only problem: the "wait for cpu" option is kinda hard to do here
  // in some of Peops timer modes. So: we ignore this option here (for now).

  if(pMixIrq)
   {
    for(ns=0;ns<NSSIZE;ns++)
     {
      if((spuCtrl&0x40) && pSpuIrq && pSpuIrq<spuMemC+0x1000)                 
       {
        for(ch=0;ch<4;ch++)
         {
          if(pSpuIrq>=pMixIrq+(ch*0x400) && pSpuIrq<pMixIrq+(ch*0x400)+2)
           do_irq();
         }
       }
      pMixIrq+=2;if(pMixIrq>spuMemC+0x3ff) pMixIrq=spuMemC;
     }
   }

  InitREVERB();

  // feed the sound
  // wanna have around 1/60 sec (16.666 ms) updates
  if (iCycle++ > 16/FRAG_MSECS)
   {
    SoundFeedStreamData((unsigned char *)pSpuBuffer,
                        ((unsigned char *)pS) - ((unsigned char *)pSpuBuffer));
    pS = (short *)pSpuBuffer;
    iCycle = 0;
   }
 }

 // end of big main loop...

 bThreadEnded = 1;

 return 0;
}

// SPU ASYNC... even newer epsxe func
//  1 time every 'cycle' cycles... harhar

void CALLBACK SPUasync(unsigned long cycle)
{
 if(iSpuAsyncWait)
  {
   iSpuAsyncWait++;
   if(iSpuAsyncWait<=16/FRAG_MSECS) return;
   iSpuAsyncWait=0;
  }

 if(iUseTimer==2)                                      // special mode, only used in Linux by this spu (or if you enable the experimental Windows mode)
  {
   if(!bSpuInit) return;                               // -> no init, no call

   MAINThread(0);                                      // -> linux high-compat mode

   // abuse iSpuAsyncWait mechanism to reduce calls to above function
   // to make it do larger chunks
   // note: doing it less often than once per frame causes skips
   iSpuAsyncWait=1;
  }
}

// SPU UPDATE... new epsxe func
//  1 time every 32 hsync lines
//  (312/32)x50 in pal
//  (262/32)x60 in ntsc

// since epsxe 1.5.2 (linux) uses SPUupdate, not SPUasync, I will
// leave that func in the linux port, until epsxe linux is using
// the async function as well

void CALLBACK SPUupdate(void)
{
 SPUasync(0);
}

// XA AUDIO

void CALLBACK SPUplayADPCMchannel(xa_decode_t *xap)
{
 if(!xap)       return;
 if(!xap->freq) return;                                // no xa freq ? bye

 FeedXA(xap);                                          // call main XA feeder
}

// CDDA AUDIO
void CALLBACK SPUplayCDDAchannel(short *pcm, int nbytes)
{
 if (!pcm)      return;
 if (nbytes<=0) return;

 FeedCDDA((unsigned char *)pcm, nbytes);
}

// SETUPTIMER: init of certain buffers and threads/timers
void SetupTimer(void)
{
 memset(SSumLR,0,sizeof(SSumLR));                      // init some mixing buffers
 memset(iFMod,0,NSSIZE*sizeof(int));
 pS=(short *)pSpuBuffer;                               // setup soundbuffer pointer

 bEndThread=0;                                         // init thread vars
 bThreadEnded=0; 
 bSpuInit=1;                                           // flag: we are inited

 if(!iUseTimer)                                        // linux: use thread
  {
   pthread_create(&thread, NULL, MAINThread, NULL);
  }
}

// REMOVETIMER: kill threads/timers
void RemoveTimer(void)
{
 bEndThread=1;                                         // raise flag to end thread

 if(!iUseTimer)                                        // linux tread?
  {
   int i=0;
   while(!bThreadEnded && i<2000) {usleep(1000L);i++;} // -> wait until thread has ended
   if(thread!=(pthread_t)-1) {pthread_cancel(thread);thread=(pthread_t)-1;}  // -> cancel thread anyway
  }

 bThreadEnded=0;                                       // no more spu is running
 bSpuInit=0;
}

// SETUPSTREAMS: init most of the spu buffers
void SetupStreams(void)
{ 
 int i;

 pSpuBuffer=(unsigned char *)malloc(32768);            // alloc mixing buffer

 if(iUseReverb==1) i=88200*2;
 else              i=NSSIZE*2;

 sRVBStart = (int *)malloc(i*4);                       // alloc reverb buffer
 memset(sRVBStart,0,i*4);
 sRVBEnd  = sRVBStart + i;
 sRVBPlay = sRVBStart;

 XAStart =                                             // alloc xa buffer
  (uint32_t *)malloc(44100 * sizeof(uint32_t));
 XAEnd   = XAStart + 44100;
 XAPlay  = XAStart;
 XAFeed  = XAStart;

 CDDAStart =                                           // alloc cdda buffer
  (uint32_t *)malloc(16384 * sizeof(uint32_t));
 CDDAEnd   = CDDAStart + 16384;
 CDDAPlay  = CDDAStart;
 CDDAFeed  = CDDAStart;

 for(i=0;i<MAXCHAN;i++)                                // loop sound channels
  {
// we don't use mutex sync... not needed, would only 
// slow us down:
//   s_chan[i].hMutex=CreateMutex(NULL,FALSE,NULL);
   s_chan[i].ADSRX.SustainLevel = 0xf;                 // -> init sustain
   s_chan[i].pLoop=spuMemC;
   s_chan[i].pStart=spuMemC;
   s_chan[i].pCurr=spuMemC;
  }

  pMixIrq=spuMemC;                                     // enable decoded buffer irqs by setting the address
}

// REMOVESTREAMS: free most buffer
void RemoveStreams(void)
{ 
 free(pSpuBuffer);                                     // free mixing buffer
 pSpuBuffer = NULL;
 free(sRVBStart);                                      // free reverb buffer
 sRVBStart = NULL;
 free(XAStart);                                        // free XA buffer
 XAStart = NULL;
 free(CDDAStart);                                      // free CDDA buffer
 CDDAStart = NULL;
}

// INIT/EXIT STUFF

// SPUINIT: this func will be called first by the main emu
long CALLBACK SPUinit(void)
{
 spuMemC = (unsigned char *)spuMem;                    // just small setup
 memset((void *)&rvb, 0, sizeof(REVERBInfo));
 InitADSR();

 spuIrq = 0;
 spuAddr = 0xffffffff;
 bEndThread = 0;
 bThreadEnded = 0;
 spuMemC = (unsigned char *)spuMem;
 pMixIrq = 0;
 memset((void *)s_chan, 0, (MAXCHAN + 1) * sizeof(SPUCHAN));
 pSpuIrq = 0;
 //iSPUIRQWait = 0;
 lastch = -1;

 //ReadConfigSPU();                                      // read user stuff
 SetupStreams();                                       // prepare streaming

 return 0;
}

// SPUOPEN: called by main emu after init
long CALLBACK SPUopen(void)
{
 if (bSPUIsOpen) return 0;                             // security for some stupid main emus

 SetupSound();                                         // setup sound (before init!)
 SetupTimer();                                         // timer for feeding data

 bSPUIsOpen = 1;

 return PSE_SPU_ERR_SUCCESS;
}

// SPUCLOSE: called before shutdown
long CALLBACK SPUclose(void)
{
 if (!bSPUIsOpen) return 0;                            // some security

 bSPUIsOpen = 0;                                       // no more open

 RemoveTimer();                                        // no more feeding
 RemoveSound();                                        // no more sound handling

 return 0;
}

// SPUSHUTDOWN: called by main emu on final exit
long CALLBACK SPUshutdown(void)
{
 SPUclose();
 RemoveStreams();                                      // no more streaming

 return 0;
}

// SPUTEST: we don't test, we are always fine ;)
long CALLBACK SPUtest(void)
{
 return 0;
}

// SPUCONFIGURE: call config dialog
long CALLBACK SPUconfigure(void)
{
#ifdef _MACOSX
 DoConfiguration();
#else
// StartCfgTool("CFG");
#endif
 return 0;
}

// SPUABOUT: show about window
void CALLBACK SPUabout(void)
{
#ifdef _MACOSX
 DoAbout();
#else
// StartCfgTool("ABOUT");
#endif
}

// SETUP CALLBACKS
// this functions will be called once, 
// passes a callback that should be called on SPU-IRQ/cdda volume change
void CALLBACK SPUregisterCallback(void (CALLBACK *callback)(void))
{
 irqCallback = callback;
}

void CALLBACK SPUregisterCDDAVolume(void (CALLBACK *CDDAVcallback)(unsigned short,unsigned short))
{
 cddavCallback = CDDAVcallback;
}

// COMMON PLUGIN INFO FUNCS
/*
char * CALLBACK PSEgetLibName(void)
{
 return _(libraryName);
}

unsigned long CALLBACK PSEgetLibType(void)
{
 return  PSE_LT_SPU;
}

unsigned long CALLBACK PSEgetLibVersion(void)
{
 return (1 << 16) | (6 << 8);
}

char * SPUgetLibInfos(void)
{
 return _(libraryInfo);
}
*/

// debug
void spu_get_debug_info(int *chans_out, int *fmod_chans_out, int *noise_chans_out)
{
 int ch = 0, fmod_chans = 0, noise_chans = 0;

 for(;ch<MAXCHAN;ch++)
 {
  if (!(dwChannelOn & (1<<ch)))
   continue;
  if (s_chan[ch].bFMod == 2)
   fmod_chans |= 1 << ch;
  if (s_chan[ch].bNoise)
   noise_chans |= 1 << ch;
 }

 *chans_out = dwChannelOn;
 *fmod_chans_out = fmod_chans;
 *noise_chans_out = noise_chans;
}

// vim:shiftwidth=1:expandtab