#include <linux/soundcard.h>
#include <linux/input.h>
-#include "common/input.h"
-#include "gp2x/in_gp2x.h"
-#include "linux/in_evdev.h"
-#include "common/menu.h"
+#include "libpicofe/plat.h"
+#include "libpicofe/input.h"
+#include "libpicofe/gp2x/in_gp2x.h"
+#include "libpicofe/gp2x/soc_pollux.h"
+#include "libpicofe/linux/in_evdev.h"
+#include "libpicofe/menu.h"
#include "warm/warm.h"
#include "plugin_lib.h"
#include "pl_gun_ts.h"
#include "pcnt.h"
#include "../plugins/gpulib/cspace.h"
-int gp2x_dev_id;
-static int fbdev = -1, memdev = -1, battdev = -1, mixerdev = -1;
-static volatile unsigned short *memregs;
-static volatile unsigned int *memregl;
+static int fbdev = -1;
static void *fb_vaddrs[2];
static unsigned int fb_paddrs[2];
static int fb_work_buf;
-static int cpu_clock_allowed, have_warm;
-static unsigned int saved_video_regs[2][6];
+static int have_warm;
#define FB_VRAM_SIZE (320*240*2*2*2) // 2 buffers with space for 24bpp mode
static unsigned short *psx_vram;
memregl[0x4458>>2] = r;
}
-/* note: both PLLs are programmed the same way,
- * the databook incorrectly states that PLL1 differs */
-static int decode_pll(unsigned int reg)
+static int cpu_clock_wrapper(int mhz)
{
- long long v;
- int p, m, s;
-
- p = (reg >> 18) & 0x3f;
- m = (reg >> 8) & 0x3ff;
- s = reg & 0xff;
-
- if (p == 0)
- p = 1;
-
- v = 27000000; // master clock
- v = v * m / (p << s);
- return v;
-}
-
-int plat_cpu_clock_get(void)
-{
- return decode_pll(memregl[0xf004>>2]) / 1000000;
-}
-
-int plat_cpu_clock_apply(int mhz)
-{
- int adiv, mdiv, pdiv, sdiv = 0;
- int i, vf000, vf004;
-
- if (!cpu_clock_allowed)
- return -1;
- if (mhz == plat_cpu_clock_get())
- return 0;
-
- // m = MDIV, p = PDIV, s = SDIV
- #define SYS_CLK_FREQ 27
- pdiv = 9;
- mdiv = (mhz * pdiv) / SYS_CLK_FREQ;
- if (mdiv & ~0x3ff)
- return -1;
- vf004 = (pdiv<<18) | (mdiv<<8) | sdiv;
-
- // attempt to keep the AHB divider close to 250, but not higher
- for (adiv = 1; mhz / adiv > 250; adiv++)
- ;
-
- vf000 = memregl[0xf000>>2];
- vf000 = (vf000 & ~0x3c0) | ((adiv - 1) << 6);
- memregl[0xf000>>2] = vf000;
- memregl[0xf004>>2] = vf004;
- memregl[0xf07c>>2] |= 0x8000;
- for (i = 0; (memregl[0xf07c>>2] & 0x8000) && i < 0x100000; i++)
- ;
-
- printf("clock set to %dMHz, AHB set to %dMHz\n", mhz, mhz / adiv);
-
// stupid pll share hack - must restart audio
+ int pollux_cpu_clock_set(int cpu_clock);
extern long SPUopen(void);
extern long SPUclose(void);
+
+ pollux_cpu_clock_set(mhz);
SPUclose();
SPUopen();
return 0;
}
-int plat_get_bat_capacity(void)
-{
- unsigned short magic_val = 0;
-
- if (battdev < 0)
- return -1;
- if (read(battdev, &magic_val, sizeof(magic_val)) != sizeof(magic_val))
- return -1;
- switch (magic_val) {
- default:
- case 1: return 100;
- case 2: return 66;
- case 3: return 40;
- case 4: return 0;
- }
-}
-
#define TIMER_BASE3 0x1980
#define TIMER_REG(x) memregl[(TIMER_BASE3 + x) >> 2]
return TIMER_REG(0);
}
-static void timer_cleanup(void)
-{
- TIMER_REG(0x40) = 0x0c; /* be sure clocks are on */
- TIMER_REG(0x08) = 0x23; /* stop the timer, clear irq in case it's pending */
- TIMER_REG(0x00) = 0; /* clear counter */
- TIMER_REG(0x40) = 0; /* clocks off */
- TIMER_REG(0x44) = 0; /* dividers back to default */
-}
-
void plat_video_menu_enter(int is_rom_loaded)
{
if (pl_vout_buf != NULL) {
{
}
-static void save_multiple_regs(unsigned int *dest, int base, int count)
-{
- const volatile unsigned int *regs = memregl + base / 4;
- int i;
-
- for (i = 0; i < count; i++)
- dest[i] = regs[i];
-}
-
-static void restore_multiple_regs(int base, const unsigned int *src, int count)
-{
- volatile unsigned int *regs = memregl + base / 4;
- int i;
-
- for (i = 0; i < count; i++)
- regs[i] = src[i];
-}
-
void plat_init(void)
{
const char *main_fb_name = "/dev/fb0";
struct fb_fix_screeninfo fbfix;
- int rate, timer_div, timer_div2;
- int fbdev, ret, warm_ret;
- FILE *f;
-
- memdev = open("/dev/mem", O_RDWR);
- if (memdev == -1) {
- perror("open(/dev/mem) failed");
- exit(1);
- }
-
- memregs = mmap(0, 0x20000, PROT_READ|PROT_WRITE, MAP_SHARED, memdev, 0xc0000000);
- if (memregs == MAP_FAILED) {
- perror("mmap(memregs) failed");
- exit(1);
- }
- memregl = (volatile void *)memregs;
+ int ret;
- // save video regs of both MLCs
- save_multiple_regs(saved_video_regs[0], 0x4058, ARRAY_SIZE(saved_video_regs[0]));
- save_multiple_regs(saved_video_regs[1], 0x4458, ARRAY_SIZE(saved_video_regs[1]));
+ plat_target_init();
fbdev = open(main_fb_name, O_RDWR);
if (fbdev == -1) {
fb_vaddrs[1] = (char *)fb_vaddrs[0] + 320*240*4;
memset(fb_vaddrs[0], 0, FB_VRAM_SIZE);
+
pollux_changemode(16, 0);
g_menuscreen_w = 320;
g_menuscreen_h = 240;
g_menuscreen_ptr = fb_flip();
- warm_ret = warm_init();
- have_warm = warm_ret == 0;
+ ret = warm_init();
+ have_warm = (ret == 0);
warm_change_cb_upper(WCB_B_BIT, 1);
- /* some firmwares have sys clk on PLL0, we can't adjust CPU clock
- * by reprogramming the PLL0 then, as it overclocks system bus */
- if ((memregl[0xf000>>2] & 0x03000030) == 0x01000000)
- cpu_clock_allowed = 1;
- else {
- cpu_clock_allowed = 0;
- fprintf(stderr, "unexpected PLL config (%08x), overclocking disabled\n",
- memregl[0xf000>>2]);
- }
-
- /* find what PLL1 runs at, for the timer */
- rate = decode_pll(memregl[0xf008>>2]);
- printf("PLL1 @ %dHz\n", rate);
-
- /* setup timer */
- timer_div = (rate + 500000) / 1000000;
- timer_div2 = 0;
- while (timer_div > 256) {
- timer_div /= 2;
- timer_div2++;
- }
- if (1 <= timer_div && timer_div <= 256 && timer_div2 < 4) {
- int timer_rate = (rate >> timer_div2) / timer_div;
- if (TIMER_REG(0x08) & 8) {
- fprintf(stderr, "warning: timer in use, overriding!\n");
- timer_cleanup();
- }
- if (timer_rate != 1000000)
- fprintf(stderr, "warning: timer drift %d us\n", timer_rate - 1000000);
-
- timer_div2 = (timer_div2 + 3) & 3;
- TIMER_REG(0x44) = ((timer_div - 1) << 4) | 2; /* using PLL1 */
- TIMER_REG(0x40) = 0x0c; /* clocks on */
- TIMER_REG(0x08) = 0x68 | timer_div2; /* run timer, clear irq, latch value */
- }
- else
- fprintf(stderr, "warning: could not make use of timer\n");
-
/* setup DMA */
DMA_REG(0x0c) = 0x20000; // pending IRQ clear
- battdev = open("/dev/pollux_batt", O_RDONLY);
- if (battdev < 0)
- perror("Warning: could't open pollux_batt");
-
- f = fopen("/dev/accel", "rb");
- if (f) {
- printf("detected Caanoo\n");
- gp2x_dev_id = GP2X_DEV_CAANOO;
- fclose(f);
- }
- else {
- printf("detected Wiz\n");
- gp2x_dev_id = GP2X_DEV_WIZ;
- }
-
in_tsbutton_init();
in_evdev_init(in_evdev_defbinds);
if (gp2x_dev_id == GP2X_DEV_CAANOO)
else
wiz_init();
- mixerdev = open("/dev/mixer", O_RDWR);
- if (mixerdev == -1)
- perror("open(/dev/mixer)");
-
pl_rearmed_cbs.pl_vout_flip = have_warm ? raw_flip_dma : raw_flip_soft;
pl_rearmed_cbs.pl_vout_set_raw_vram = pl_vout_set_raw_vram;
pl_rearmed_cbs.screen_w = 320;
pl_rearmed_cbs.screen_h = 240;
+
+ plat_target_setup_input();
+
+ plat_target.cpu_clock_set = cpu_clock_wrapper;
}
void plat_finish(void)
{
warm_finish();
- timer_cleanup();
-
memset(fb_vaddrs[0], 0, FB_VRAM_SIZE);
- restore_multiple_regs(0x4058, saved_video_regs[0], ARRAY_SIZE(saved_video_regs[0]));
- restore_multiple_regs(0x4458, saved_video_regs[1], ARRAY_SIZE(saved_video_regs[1]));
- memregl[0x4058>>2] |= 0x10;
- memregl[0x4458>>2] |= 0x10;
munmap(fb_vaddrs[0], FB_VRAM_SIZE);
close(fbdev);
-
- if (battdev >= 0)
- close(battdev);
- if (mixerdev >= 0)
- close(mixerdev);
- munmap((void *)memregs, 0x20000);
- close(memdev);
+ plat_target_finish();
}
/* WIZ RAM lack workaround */
{ 0, 0, 0 },
};
-void plat_step_volume(int is_up)
-{
- static int volume = 50;
- int ret, val;
-
- if (mixerdev < 0)
- return;
-
- if (is_up) {
- volume += 5;
- if (volume > 255) volume = 255;
- }
- else {
- volume -= 5;
- if (volume < 0) volume = 0;
- }
- val = volume;
- val |= val << 8;
-
- ret = ioctl(mixerdev, SOUND_MIXER_WRITE_PCM, &val);
- if (ret == -1)
- perror("WRITE_PCM");
-}
-
// unused dummy for in_gp2x
volatile unsigned short *gp2x_memregs;
notaz.gp2x.de / pcsx_rearmed.git / blobdiff