X-Git-Url: https://notaz.gp2x.de/cgi-bin/gitweb.cgi?p=picodrive.git;a=blobdiff_plain;f=pico%2Fpico_cmn.c;h=0907b930e92e27bbf8eded4241240db47e2680f7;hp=341255a8139fd7c7018b82d2b3cf0f797f22e12f;hb=334f00e24ed55a3e259d1a9d42c4530a770b9a56;hpb=99ade2ee2f76fa8170fb4e1abacc24f39a150c44 diff --git a/pico/pico_cmn.c b/pico/pico_cmn.c index 341255a..0907b93 100644 --- a/pico/pico_cmn.c +++ b/pico/pico_cmn.c @@ -8,7 +8,6 @@ #define CYCLES_M68K_LINE 488 // suitable for both PAL/NTSC #define CYCLES_M68K_VINT_LAG 68 -#define CYCLES_M68K_ASD 148 // pad delay (for 6 button pads) #define PAD_DELAY() { \ @@ -53,18 +52,50 @@ static void SekSyncM68k(void) static inline void SekRunM68k(int cyc) { SekCycleAim += cyc; + cyc = SekCycleAim - SekCycleCnt; + if (cyc <= 0) + return; + SekCycleCnt += cyc >> 6; // refresh slowdowns SekSyncM68k(); } +static void do_hint(struct PicoVideo *pv) +{ + pv->pending_ints |= 0x10; + if (pv->reg[0] & 0x10) { + elprintf(EL_INTS, "hint: @ %06x [%u]", SekPc, SekCyclesDone()); + SekInterrupt(4); + } +} + +static void do_timing_hacks_as(struct PicoVideo *pv, int vdp_slots) +{ + pv->lwrite_cnt += vdp_slots - Pico.m.dma_xfers * 2; // wrong *2 + if (pv->lwrite_cnt > vdp_slots) + pv->lwrite_cnt = vdp_slots; + else if (pv->lwrite_cnt < 0) + pv->lwrite_cnt = 0; + if (Pico.m.dma_xfers) + SekCyclesBurn(CheckDMA()); +} + +static void do_timing_hacks_vb(void) +{ + if (Pico.m.dma_xfers) + SekCyclesBurn(CheckDMA()); +} + static int PicoFrameHints(void) { - struct PicoVideo *pv=&Pico.video; - int lines, y, lines_vis = 224, line_sample, skip, vcnt_wrap; + struct PicoVideo *pv = &Pico.video; + int line_sample = Pico.m.pal ? 68 : 93; + int vdp_slots = (Pico.video.reg[12] & 1) ? 18 : 16; + int lines, y, lines_vis, skip; + int vcnt_wrap, vcnt_adj; unsigned int cycles; int hint; // Hint counter pevt_log_m68k_o(EVT_FRAME_START); - pv->v_counter = Pico.m.scanline = 0; if ((PicoOpt&POPT_ALT_RENDERER) && !PicoSkipFrame && (pv->reg[1]&0x40)) { // fast rend., display enabled // draw a frame just after vblank in alternative render mode @@ -77,26 +108,17 @@ static int PicoFrameHints(void) } else skip=PicoSkipFrame; - if (Pico.m.pal) { - line_sample = 68; - if (pv->reg[1]&8) lines_vis = 240; - } else { - line_sample = 93; - } - + timing.m68c_frame_start = SekCyclesDone(); + pv->v_counter = Pico.m.scanline = 0; z80_resetCycles(); - PsndDacLine = 0; - emustatus &= ~1; - - pv->status&=~0x88; // clear V-Int, come out of vblank + PsndStartFrame(); - hint=pv->reg[10]; // Load H-Int counter - //dprintf("-hint: %i", hint); + // Load H-Int counter + hint = (pv->status & PVS_ACTIVE) ? pv->hint_cnt : pv->reg[10]; - // This is to make active scan longer (needed for Double Dragon 2, mainly) - CPUS_RUN(CYCLES_M68K_ASD); + pv->status |= PVS_ACTIVE; - for (y = 0; y < lines_vis; y++) + for (y = 0; ; y++) { pv->v_counter = Pico.m.scanline = y; if ((pv->reg[12]&6) == 6) { // interlace mode 2 @@ -105,24 +127,16 @@ static int PicoFrameHints(void) pv->v_counter &= 0xff; } - // VDP FIFO - pv->lwrite_cnt -= 12; - if (pv->lwrite_cnt <= 0) { - pv->lwrite_cnt=0; - Pico.video.status|=0x200; - } + if ((y == 224 && !(pv->reg[1] & 8)) || y == 240) + break; PAD_DELAY(); // H-Interrupts: - if (--hint < 0) // y <= lines_vis: Comix Zone, Golden Axe + if (--hint < 0) { - hint=pv->reg[10]; // Reload H-Int counter - pv->pending_ints|=0x10; - if (pv->reg[0]&0x10) { - elprintf(EL_INTS, "hint: @ %06x [%i]", SekPc, SekCyclesDone()); - SekInterrupt(4); - } + hint = pv->reg[10]; // Reload H-Int counter + do_hint(pv); } // decide if we draw this line @@ -145,8 +159,6 @@ static int PicoFrameHints(void) if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80)) PicoSyncZ80(cycles); - if (ym2612.dacen && PsndDacLine <= y) - PsndDoDAC(y); #ifdef PICO_CD if (PicoAHW & PAHW_MCD) pcd_sync_s68k(cycles, 0); @@ -159,56 +171,53 @@ static int PicoFrameHints(void) // Run scanline: line_base_cycles = SekCyclesDone(); - if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA()); + do_timing_hacks_as(pv, vdp_slots); CPUS_RUN(CYCLES_M68K_LINE); if (PicoLineHook) PicoLineHook(); pevt_log_m68k_o(EVT_NEXT_LINE); } + lines_vis = (pv->reg[1] & 8) ? 240 : 224; + if (y == lines_vis) + pv->status &= ~PVS_ACTIVE; + if (!skip) { - if (DrawScanline < y) + if (Pico.est.DrawScanline < y) PicoDrawSync(y - 1, 0); #ifdef DRAW_FINISH_FUNC DRAW_FINISH_FUNC(); #endif } - // V-int line (224 or 240) - Pico.m.scanline = y; - pv->v_counter = 0xe0; // bad for 240 mode - if ((pv->reg[12]&6) == 6) pv->v_counter = 0xc1; - // VDP FIFO - pv->lwrite_cnt=0; - Pico.video.status|=0x200; + pv->lwrite_cnt = 0; + Pico.video.status |= SR_EMPT; memcpy(PicoPadInt, PicoPad, sizeof(PicoPadInt)); PAD_DELAY(); - // Last H-Int: + // Last H-Int (normally): if (--hint < 0) { - hint=pv->reg[10]; // Reload H-Int counter - pv->pending_ints|=0x10; - //printf("rhint: %i @ %06x [%i|%i]\n", hint, SekPc, y, SekCyclesDone()); - if (pv->reg[0]&0x10) SekInterrupt(4); + hint = pv->reg[10]; // Reload H-Int counter + do_hint(pv); } - pv->status|=0x08; // go into vblank - pv->pending_ints|=0x20; + pv->status |= SR_VB; // go into vblank + pv->pending_ints |= 0x20; // the following SekRun is there for several reasons: // there must be a delay after vblank bit is set and irq is asserted (Mazin Saga) // also delay between F bit (bit 7) is set in SR and IRQ happens (Ex-Mutants) // also delay between last H-int and V-int (Golden Axe 3) line_base_cycles = SekCyclesDone(); - if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA()); + do_timing_hacks_vb(); CPUS_RUN(CYCLES_M68K_VINT_LAG); - if (pv->reg[1]&0x20) { - elprintf(EL_INTS, "vint: @ %06x [%i]", SekPc, SekCyclesDone()); + if (pv->reg[1] & 0x20) { + elprintf(EL_INTS, "vint: @ %06x [%u]", SekPc, SekCyclesDone()); SekInterrupt(6); } @@ -230,47 +239,82 @@ static int PicoFrameHints(void) // get samples from sound chips if (y == 224 && PsndOut) - { - if (ym2612.dacen && PsndDacLine <= y) - PsndDoDAC(y); PsndGetSamples(y); - } // Run scanline: - CPUS_RUN(CYCLES_M68K_LINE - CYCLES_M68K_VINT_LAG - CYCLES_M68K_ASD); + CPUS_RUN(CYCLES_M68K_LINE - CYCLES_M68K_VINT_LAG); if (PicoLineHook) PicoLineHook(); pevt_log_m68k_o(EVT_NEXT_LINE); - lines = scanlines_total; - vcnt_wrap = Pico.m.pal ? 0x103 : 0xEB; // based on Gens, TODO: verify + if (Pico.m.pal) { + lines = 313; + vcnt_wrap = 0x103; + vcnt_adj = 57; + } + else { + lines = 262; + vcnt_wrap = 0xEB; + vcnt_adj = 6; + } - for (y++; y < lines; y++) + for (y++; y < lines - 1; y++) { pv->v_counter = Pico.m.scanline = y; if (y >= vcnt_wrap) - pv->v_counter -= Pico.m.pal ? 56 : 6; + pv->v_counter -= vcnt_adj; if ((pv->reg[12]&6) == 6) pv->v_counter = (pv->v_counter << 1) | 1; pv->v_counter &= 0xff; PAD_DELAY(); + if ((pv->status & PVS_ACTIVE) && --hint < 0) + { + hint = pv->reg[10]; // Reload H-Int counter + do_hint(pv); + } + // Run scanline: line_base_cycles = SekCyclesDone(); - if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA()); + do_timing_hacks_vb(); CPUS_RUN(CYCLES_M68K_LINE); if (PicoLineHook) PicoLineHook(); pevt_log_m68k_o(EVT_NEXT_LINE); } + pv->status &= ~SR_VB; + + // last scanline + Pico.m.scanline = y; + pv->v_counter = 0xff; + pv->lwrite_cnt = 0; + + PAD_DELAY(); + + if ((pv->status & PVS_ACTIVE) && --hint < 0) + { + hint = pv->reg[10]; // Reload H-Int counter + do_hint(pv); + } + + // Run scanline: + line_base_cycles = SekCyclesDone(); + do_timing_hacks_as(pv, vdp_slots); + CPUS_RUN(CYCLES_M68K_LINE); + + if (PicoLineHook) PicoLineHook(); + pevt_log_m68k_o(EVT_NEXT_LINE); + // sync cpus cycles = SekCyclesDone(); if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80)) PicoSyncZ80(cycles); - if (PsndOut && ym2612.dacen && PsndDacLine <= lines-1) - PsndDoDAC(lines-1); + if (PsndOut && ym2612.dacen && PsndDacLine < lines) + PsndDoDAC(lines - 1); + if (PsndOut && PsndPsgLine < lines) + PsndDoPSG(lines - 1); #ifdef PICO_CD if (PicoAHW & PAHW_MCD) @@ -281,6 +325,8 @@ static int PicoFrameHints(void) #endif timers_cycle(); + pv->hint_cnt = hint; + return 0; }