c62d2810 |
1 | /******************************************************************************/ |
2 | /* 2.0) Starting FCE Ultra */ |
3 | /******************************************************************************/ |
4 | |
5 | Start FCE Ultra using the following format: |
6 | |
7 | fceu <arguments> romimage.nes |
8 | |
9 | <arguments> can be one or more of the following: |
10 | |
11 | -vmode x Select video mode(all are 8 bpp). |
12 | 1 = 256x240 @ 72 hz <Default> |
13 | 2 = 256x256 @ 65 hz |
14 | 3 = 256x256(with scanlines) @ 120 hz |
15 | 6 = 256x224(with scanlines) @ 120 hz |
16 | 8 = 256x224 @ 103 hz |
17 | -vsync x Wait for the screen's vertical retrace before updating |
18 | the screen. This *may* cause sound distortion. |
19 | 0 = Disabled. <Default> |
20 | 1 = Enabled. |
21 | -cpalette x Load a custom global palette from file x. |
22 | The filename x is saved in the configuration file, |
23 | not the data from the file. Note that you should |
24 | probably use an absolute("C:\nes\test.pal") filename |
25 | rather than a relative("test.pal") filename. If x is 0, |
26 | the default (built in) global palette will be used. |
27 | -ntsccol Emulate an NTSC's TV's colors based on user-supplied |
28 | hue and tint values. |
29 | 0 = Disabled. |
30 | 1 = Enabled. |
31 | -sound x Sound. <Default=44100> |
32 | 0 = Disabled. |
33 | Otherwise, x = playback rate in samples per second. |
34 | -soundvol x Sound volume. x is an integral percentage value. |
35 | The default value is, obviously, 100. |
36 | Setting it higher will increase the likelihood that |
37 | sound clipping will occur. This shouldn't be noticeable |
38 | if the volume is reasonable(200% or lower; perhaps even |
39 | higher for many games). |
40 | -f8bit x Force 8-bit sound. Enabling this will decrease |
41 | sound quality noticeably without increasing |
42 | performance noticeably. Only use when 16-bit sound |
43 | is problematic. |
44 | 0 = Disabled. <Default> |
45 | 1 = Enabled. |
46 | -nothrottle x Disables speed throttling used when sound is disabled |
47 | if x is non-zero. The default value of x is 0. |
48 | -joy x Joystick mapped to virtual joystick x. |
49 | 0 = Disabled, reset configuration. |
50 | -inputx str Select device mapped to virtual NES-style input port |
51 | x(1-2). |
52 | The default for both virtual input ports is "gamepad". |
53 | str may be: none, gamepad, zapper, powerpada, |
54 | powerpadb, arkanoid |
55 | -fcexp str Select Famicom expansion port device. If you select |
56 | a device other than "none", you should enable the |
57 | "gamepad" on both NES-style virtual input ports. |
58 | The default is "none". |
59 | str may be: none, shadow, arkanoid, 4player, fkb |
60 | -nofs x Disables Four-Score emulation if x is 1. Default is 0. |
61 | Note that Four-Score emulation will only be active |
62 | if "gamepad" is mapped to one or both virtual input |
63 | ports. |
64 | -gg Enable Game Genie emulation. |
65 | -pal Emulate a PAL NES. |
66 | -no8lim x Disables the 8 sprites per scanline limitation. |
67 | 0 = Limitation enabled. <Default> |
68 | 1 = Limitation disabled. |
69 | -subase x Save extra game data files(such as battery-backed RAM) |
70 | under the base directory if enabled. |
71 | 0 = Disabled. <Default> |
72 | 1 = Enabled. |
73 | -snapname x Selects what type of file name screen snapshots will |
74 | have. |
75 | 0 = Numeric(0.png) <Default> |
76 | 1 = File base and numeric(mario-0.png) |
77 | -clipsides x Clip leftmost and rightmost 8 columns of pixels of |
78 | video output. |
79 | 0 = Disabled. <Default> |
80 | 1 = Enabled. |
81 | -slstart x Set the first drawn emulated scanline for NTSC emulation |
82 | mode. Valid values for x are 0 through 239. |
83 | The default value is 8. |
84 | -slend x Set the last drawn emulated scanline for NTSC emulation |
85 | mode. Valid values for x are 0 through 239. |
86 | The default value is 239. |
87 | -slstartp x Set the first drawn emulated scanline for PAL emulation |
88 | mode. Valid values for x are 0 through 239. |
89 | The default value is 0. |
90 | -slendp x Set the last drawn emulated scanline for PAL emulation |
91 | mode. Valid values for x are 0 through 239. |
92 | The default value is 239. |
93 | |