c62d2810 |
1 | /******************************************************************************/ |
2 | /* 2.0) Starting FCE Ultra */ |
3 | /******************************************************************************/ |
4 | |
5 | Start FCE Ultra using the following format: |
6 | |
7 | ./fceu <arguments> romimage.nes |
8 | |
9 | <arguments> can be one or more of the following: |
10 | |
11 | -vmode x Select video mode(all are 8 bpp). |
12 | 1 = 256x240 @ 72 hz <Default> |
13 | 2 = 256x256 @ 65 hz |
14 | 3 = 256x256(with scanlines) @ 120 hz |
15 | 4 = 640x480(with scanlines) |
16 | 5 = 640x480("1 per 4") |
17 | 6 = 256x224(with scanlines) @ 120 hz |
18 | 7 = 320x240 |
19 | 8 = 256x224 @ 103 hz |
20 | -vsync x Wait for the screen's vertical retrace before updating |
21 | the screen. If you have sound enabled and enable this, |
22 | you may have to increase the number of sound fragments |
23 | from the default of 8, to reduce buffer underruns. |
24 | Buffer underruns will not be preventable if the |
25 | current video refresh rate is < ~60 hz (or < ~50 hz |
26 | if PAL emulation is enabled). |
27 | 0 = Disabled. <Default> |
28 | 1 = Enabled. |
29 | -cpalette x Load a custom global palette from file x. |
30 | The filename x is saved in the configuration file, |
31 | not the data from the file. Note that you should |
32 | probably use an absolute("/home/jp/test.pal") filename |
33 | rather than a relative("test.pal") filename. If x is 0, |
34 | the default (built in) global palette will be used. |
35 | -ntsccol Emulate an NTSC's TV's colors based on user-supplied |
36 | hue and tint values. |
37 | 0 = Disabled. <Default> |
38 | 1 = Enabled. |
39 | -sound x Sound. <Default=48000> |
40 | 0 = Disabled. |
41 | Otherwise, x = playback rate in samples per second. |
42 | -soundvol x Sound volume. x is an integral percentage value. |
43 | The default value is, obviously, 100. |
44 | Setting it higher will increase the likelihood that |
45 | sound clipping will occur. This shouldn't be noticeable |
46 | if the volume is reasonable(200% or lower; perhaps even |
47 | higher for many games). |
48 | -sfragsize x Set sound fragment size to 2^x(2 to the power of x) |
49 | SAMPLES. The default value is 7. |
50 | -snfrags x Set number of sound fragments to x. The default value |
51 | is 8. |
52 | -f8bit x Force 8-bit sound. Enabling this will decrease |
53 | sound quality noticeably without increasing |
54 | performance noticeably. Only use when 16-bit sound |
55 | is problematic. |
56 | 0 = Disabled. <Default> |
57 | 1 = Enabled. |
58 | -nothrottle x Disables speed throttling used when sound is disabled |
59 | if x is non-zero. The default value of x is 0. |
60 | -joyx y Joystick mapped to virtual joystick x(1-4). |
61 | 0 = Disabled, reset configuration. <Default> |
62 | Otherwise, y(1-inf) = joystick number. |
63 | -inputx str Select device mapped to virtual NES-style input port |
64 | x(1-2). |
65 | The default for both virtual input ports is "gamepad". |
66 | str may be: none, gamepad, zapper, powerpada, |
67 | powerpadb, arkanoid |
68 | -fcexp str Select Famicom expansion port device. If you select |
69 | a device other than "none", you should enable the |
70 | "gamepad" on both NES-style virtual input ports. |
71 | The default is "none". |
72 | str may be: none, shadow, arkanoid, 4player, fkb |
73 | -nofs x Disables Four-Score emulation if x is 1. Default is 0. |
74 | Note that Four-Score emulation will only be active |
75 | if "gamepad" is mapped to one or both virtual input |
76 | ports. |
77 | -gg Enable Game Genie emulation. |
78 | -pal Emulate a PAL NES. |
79 | -no8lim x Disables the 8 sprites per scanline limitation. |
80 | 0 = Limitation enabled. <Default> |
81 | 1 = Limitation disabled. |
82 | -subase x Save extra game data files(such as battery-backed RAM) |
83 | under the base directory if enabled. |
84 | 0 = Disabled. <Default> |
85 | 1 = Enabled. |
86 | -snapname x Selects what type of file name screen snapshots will |
87 | have. |
88 | 0 = Numeric(0.png) <Default> |
89 | 1 = File base and numeric(mario-0.png) |
90 | -clipsides x Clip leftmost and rightmost 8 columns of pixels of |
91 | video output. |
92 | 0 = Disabled. <Default> |
93 | 1 = Enabled. |
94 | -slstart x Set the first drawn emulated scanline for NTSC emulation |
95 | mode. Valid values for x are 0 through 239. |
96 | The default value is 8. |
97 | -slend x Set the last drawn emulated scanline for NTSC emulation |
98 | mode. Valid values for x are 0 through 239. |
99 | The default value is 239. |
100 | -slstartp x Set the first drawn emulated scanline for PAL emulation |
101 | mode. Valid values for x are 0 through 239. |
102 | The default value is 0. |
103 | -slendp x Set the last drawn emulated scanline for PAL emulation |
104 | mode. Valid values for x are 0 through 239. |
105 | The default value is 239. |
106 | -connect s Connect to server 's' for TCP/IP network play. |
107 | -server Be a host/server for TCP/IP network play. |
108 | -netport x Use TCP/IP port x for network play. The default |
109 | port is 4046. |