| 063ae4be |
1 | Live info |
| 2 | --------- |
| 3 | |
| 4 | This is a tool that shows CPU, memory, I/O, network and battery |
| 5 | information on an always-visible layer, updated once a second. |
| 6 | Uses system-reserved OMAP hardware layer, so should be visible |
| 7 | in most programs that don't use tv-out (tv-out needs that same |
| 8 | layer to send video to TV). |
| 9 | |
| 10 | When you want to exit Live info, just run this pnd again. |
| 11 | |
| 12 | |
| 13 | Fields |
| 14 | ------ |
| 15 | |
| 16 | 17:40:05 real time clock, hours:minutes:seconds |
| 17 | |
| 18 | CPU: 100% total CPU usage, in percent |
| 19 | SYS: 0% CPU usage by the kernel only |
| 20 | IRQ: 29 CPU interrupts per second |
| 21 | CS: 30 CPU context switches per second |
| 22 | f: 1000M CPU clock frequency, in MHz |
| 23 | V: 1.375V CPU voltage |
| 24 | |
| 25 | mem |
| 26 | M: 414M free RAM, in megabytes |
| 27 | S: 125M free swap space, in megabytes |
| 28 | H: 0M memory used in huge pages, MB (only shown if nonzero) |
| 29 | |
| 30 | i/o |
| 31 | R: 0.0M/s current read throughput from SD cards, in megabytes/s |
| 32 | W: 0.0M/s current write throughput to SD cards, in megabytes/s |
| 33 | |
| 34 | net |
| 35 | D: 0K/s download throughput, kilobytes/s |
| 36 | U: 0K/s upload throughput, kilobytes/s |
| 37 | S: -45dBm wifi signal strength, in dBm |
| 38 | |
| 39 | batt |
| 40 | C: 91% estimated battery charge level (from monitoring chip) |
| 41 | t: 13:14 estimated time to empty/full, hours:minutes |
| 42 | V: 3.960V current battery voltage |
| 43 | P: -1.140W electric power going into battery, negative means discharge |
| 44 | T: 23.2C battery temperature |
| 45 | |
| 46 | |
| 47 | License |
| 48 | ------- |
| 49 | |
| 50 | 3-clause BSD. Source code included in pnd itself. |
notaz.gp2x.de / pandora_liveinfo.git / blame