cc68a136 |
1 | \r |
2 | #include "app.h"\r |
3 | \r |
4 | \r |
5 | // Pack our flags into r1, in SR/CCR register format\r |
6 | // trashes r0,r2\r |
7 | void OpFlagsToReg(int high)\r |
8 | {\r |
9 | ot(" ldrb r0,[r7,#0x45] ;@ X bit\n");\r |
10 | ot(" mov r1,r9,lsr #28 ;@ ____NZCV\n");\r |
11 | ot(" eor r2,r1,r1,ror #1 ;@ Bit 0=C^V\n");\r |
12 | ot(" tst r2,#1 ;@ 1 if C!=V\n");\r |
13 | ot(" eorne r1,r1,#3 ;@ ____NZVC\n");\r |
14 | ot("\n");\r |
15 | if (high) ot(" ldrb r2,[r7,#0x44] ;@ Include SR high\n");\r |
16 | ot(" and r0,r0,#0x02\n");\r |
17 | ot(" orr r1,r1,r0,lsl #3 ;@ ___XNZVC\n");\r |
18 | if (high) ot(" orr r1,r1,r2,lsl #8\n");\r |
19 | ot("\n");\r |
20 | }\r |
21 | \r |
22 | // Convert SR/CRR register in r0 to our flags\r |
23 | // trashes r0,r1\r |
24 | void OpRegToFlags(int high)\r |
25 | {\r |
26 | ot(" eor r1,r0,r0,ror #1 ;@ Bit 0=C^V\n");\r |
27 | ot(" mov r2,r0,lsr #3 ;@ r2=___XN\n");\r |
28 | ot(" tst r1,#1 ;@ 1 if C!=V\n");\r |
29 | ot(" eorne r0,r0,#3 ;@ ___XNZCV\n");\r |
30 | ot(" strb r2,[r7,#0x45] ;@ Store X bit\n");\r |
31 | ot(" mov r9,r0,lsl #28 ;@ r9=NZCV...\n");\r |
32 | \r |
33 | if (high)\r |
34 | {\r |
35 | ot(" mov r0,r0,ror #8\n");\r |
36 | ot(" and r0,r0,#0xa7 ;@ only take defined bits\n");\r |
37 | ot(" strb r0,[r7,#0x44] ;@ Store SR high\n");\r |
38 | }\r |
39 | ot("\n");\r |
40 | }\r |
41 | \r |
42 | // checks for supervisor bit, if not set, jumps to SuperEnd()\r |
43 | // also sets r11 to SR high value, SuperChange() uses this\r |
44 | void SuperCheck(int op)\r |
45 | {\r |
46 | ot(" ldr r11,[r7,#0x44] ;@ Get SR high\n");\r |
47 | ot(" tst r11,#0x20 ;@ Check we are in supervisor mode\n");\r |
48 | ot(" beq WrongMode%.4x ;@ No\n",op);\r |
49 | ot("\n");\r |
50 | }\r |
51 | \r |
52 | void SuperEnd(int op)\r |
53 | {\r |
54 | ot("WrongMode%.4x%s\n",op,ms?"":":");\r |
55 | ot(" sub r4,r4,#2 ;@ this opcode wasn't executed - go back\n");\r |
56 | ot(" mov r0,#0x20 ;@ privilege violation\n");\r |
57 | ot(" bl Exception\n");\r |
58 | Cycles=34;\r |
59 | OpEnd();\r |
60 | }\r |
61 | \r |
62 | // does OSP and A7 swapping if needed\r |
63 | // new or old SR (not the one already in [r7,#0x44]) should be passed in r11\r |
64 | // trashes r1,r11\r |
65 | void SuperChange(int op)\r |
66 | {\r |
67 | ot(";@ A7 <-> OSP?\n");\r |
68 | ot(" ldr r1,[r7,#0x44] ;@ Get other SR high\n");\r |
69 | ot(" and r11,r11,#0x20\n");\r |
70 | ot(" and r1,r1,#0x20\n");\r |
71 | ot(" teq r11,r1 ;@ r11 xor r1\n");\r |
72 | ot(" beq no_sp_swap%.4x\n",op);\r |
73 | ot(" ;@ swap OSP and A7:\n");\r |
74 | ot(" ldr r11,[r7,#0x3C] ;@ Get A7\n");\r |
75 | ot(" ldr r1, [r7,#0x48] ;@ Get OSP\n");\r |
76 | ot(" str r11,[r7,#0x48]\n");\r |
77 | ot(" str r1, [r7,#0x3C]\n");\r |
78 | ot("no_sp_swap%.4x%s\n", op, ms?"":":");\r |
79 | }\r |
80 | \r |
81 | \r |
82 | \r |
83 | // --------------------- Opcodes 0x1000+ ---------------------\r |
84 | // Emit a Move opcode, 00xxdddd ddssssss\r |
85 | int OpMove(int op)\r |
86 | {\r |
87 | int sea=0,tea=0;\r |
88 | int size=0,use=0;\r |
89 | int movea=0;\r |
90 | \r |
91 | // Get source and target EA\r |
92 | sea = op&0x003f;\r |
93 | tea =(op&0x01c0)>>3;\r |
94 | tea|=(op&0x0e00)>>9;\r |
95 | \r |
96 | if (tea>=8 && tea<0x10) movea=1;\r |
97 | \r |
98 | // Find size extension\r |
99 | switch (op&0x3000)\r |
100 | {\r |
101 | default: return 1;\r |
102 | case 0x1000: size=0; break;\r |
103 | case 0x3000: size=1; break;\r |
104 | case 0x2000: size=2; break;\r |
105 | }\r |
106 | \r |
107 | if (size<1 && (movea || EaAn(sea))) return 1; // move.b An,* and movea.b * are invalid\r |
108 | \r |
109 | // See if we can do this opcode:\r |
110 | if (EaCanRead (sea,size)==0) return 1;\r |
111 | if (EaCanWrite(tea )==0) return 1;\r |
112 | \r |
113 | use=OpBase(op);\r |
114 | if (tea<0x38) use&=~0x0e00; // Use same handler for register ?0-7\r |
115 | \r |
116 | if (tea>=0x18 && tea<0x28 && (tea&7)==7) use|=0x0e00; // Specific handler for (a7)+ and -(a7)\r |
117 | \r |
118 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
119 | \r |
120 | OpStart(op); Cycles=4;\r |
121 | \r |
122 | EaCalc(0,0x003f,sea,size);\r |
123 | EaRead(0, 1,sea,size,0x003f);\r |
124 | \r |
125 | if (movea==0) {\r |
126 | ot(" adds r1,r1,#0 ;@ Defines NZ, clears CV\n");\r |
127 | ot(" mrs r9,cpsr ;@ r9=NZCV flags\n");\r |
128 | ot("\n");\r |
129 | }\r |
130 | \r |
131 | if (movea) size=2; // movea always expands to 32-bits\r |
132 | \r |
133 | EaCalc (0,0x0e00,tea,size);\r |
134 | #if SPLIT_MOVEL_PD\r |
135 | if ((tea&0x38)==0x20 && size==2) { // -(An)\r |
136 | ot(" mov r10,r0\n");\r |
137 | ot(" mov r11,r1\n");\r |
138 | ot(" add r0,r0,#2\n");\r |
139 | EaWrite(0, 1,tea,1,0x0e00);\r |
140 | EaWrite(10, 11,tea,1,0x0e00,1);\r |
141 | } else {\r |
142 | EaWrite(0, 1,tea,size,0x0e00);\r |
143 | }\r |
144 | #else\r |
145 | EaWrite(0, 1,tea,size,0x0e00);\r |
146 | #endif\r |
147 | \r |
148 | #if CYCLONE_FOR_GENESIS && !MEMHANDLERS_CHANGE_CYCLES\r |
149 | // this is a bit hacky\r |
150 | if ((tea==0x39||(tea&0x38)==0x10)&&size>=1)\r |
151 | ot(" ldr r5,[r7,#0x5c] ;@ Load Cycles\n");\r |
152 | #endif\r |
153 | \r |
154 | if((tea&0x38)==0x20) Cycles-=2; // less cycles when dest is -(An)\r |
155 | \r |
156 | OpEnd();\r |
157 | return 0;\r |
158 | }\r |
159 | \r |
160 | // --------------------- Opcodes 0x41c0+ ---------------------\r |
161 | // Emit an Lea opcode, 0100nnn1 11aaaaaa\r |
162 | int OpLea(int op)\r |
163 | {\r |
164 | int use=0;\r |
165 | int sea=0,tea=0;\r |
166 | \r |
167 | sea= op&0x003f;\r |
168 | tea=(op&0x0e00)>>9; tea|=8;\r |
169 | \r |
170 | if (EaCanRead(sea,-1)==0) return 1; // See if we can do this opcode\r |
171 | \r |
172 | use=OpBase(op);\r |
173 | use&=~0x0e00; // Also use 1 handler for target ?0-7\r |
174 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
175 | \r |
176 | OpStart(op);\r |
177 | \r |
178 | EaCalc (1,0x003f,sea,0); // Lea\r |
179 | EaCalc (0,0x0e00,tea,2,1);\r |
180 | EaWrite(0, 1,tea,2,0x0e00,1);\r |
181 | \r |
182 | Cycles=Ea_add_ns(g_lea_cycle_table,sea);\r |
183 | \r |
184 | OpEnd();\r |
185 | \r |
186 | return 0;\r |
187 | }\r |
188 | \r |
189 | // --------------------- Opcodes 0x40c0+ ---------------------\r |
190 | // Move SR opcode, 01000tt0 11aaaaaa move SR\r |
191 | int OpMoveSr(int op)\r |
192 | {\r |
193 | int type=0,ea=0;\r |
194 | int use=0,size=1;\r |
195 | \r |
196 | type=(op>>9)&3; // from SR, from CCR, to CCR, to SR\r |
197 | ea=op&0x3f;\r |
198 | \r |
199 | if(EaAn(ea)) return 1; // can't use An regs\r |
200 | \r |
201 | switch(type)\r |
202 | {\r |
203 | case 0:\r |
204 | if (EaCanWrite(ea)==0) return 1; // See if we can do this opcode:\r |
205 | break;\r |
206 | \r |
207 | case 1:\r |
208 | return 1; // no such op in 68000\r |
209 | \r |
210 | case 2: case 3:\r |
211 | if (EaCanRead(ea,size)==0) return 1; // See if we can do this opcode:\r |
212 | break;\r |
213 | }\r |
214 | \r |
215 | use=OpBase(op);\r |
216 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
217 | \r |
218 | OpStart(op);\r |
219 | Cycles=12;\r |
220 | if (type==0) Cycles=(ea>=8)?8:6;\r |
221 | \r |
222 | if (type==3) SuperCheck(op); // 68000 model allows reading whole SR in user mode (but newer models don't)\r |
223 | \r |
224 | if (type==0 || type==1)\r |
225 | {\r |
226 | OpFlagsToReg(type==0);\r |
227 | EaCalc (0,0x003f,ea,size);\r |
228 | EaWrite(0, 1,ea,size,0x003f);\r |
229 | }\r |
230 | \r |
231 | if (type==2 || type==3)\r |
232 | {\r |
233 | EaCalc(0,0x003f,ea,size);\r |
234 | EaRead(0, 0,ea,size,0x003f);\r |
235 | OpRegToFlags(type==3);\r |
236 | if (type==3) {\r |
237 | SuperChange(op);\r |
238 | CheckInterrupt(op);\r |
239 | }\r |
240 | }\r |
241 | \r |
242 | OpEnd();\r |
243 | \r |
244 | if (type==3) SuperEnd(op);\r |
245 | \r |
246 | return 0;\r |
247 | }\r |
248 | \r |
249 | \r |
250 | // Ori/Andi/Eori $nnnn,sr 0000t0t0 01111100\r |
251 | int OpArithSr(int op)\r |
252 | {\r |
253 | int type=0,ea=0;\r |
254 | int use=0,size=0;\r |
255 | \r |
256 | type=(op>>9)&5; if (type==4) return 1;\r |
257 | size=(op>>6)&1; // ccr or sr?\r |
258 | ea=0x3c;\r |
259 | \r |
260 | use=OpBase(op);\r |
261 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
262 | \r |
263 | OpStart(op); Cycles=16;\r |
264 | \r |
265 | if (size) SuperCheck(op);\r |
266 | \r |
267 | EaCalc(0,0x003f,ea,size);\r |
268 | EaRead(0, 10,ea,size,0x003f);\r |
269 | \r |
270 | OpFlagsToReg(size);\r |
271 | if (type==0) ot(" orr r0,r1,r10\n");\r |
272 | if (type==1) ot(" and r0,r1,r10\n");\r |
273 | if (type==5) ot(" eor r0,r1,r10\n");\r |
274 | OpRegToFlags(size);\r |
275 | if (size) {\r |
276 | SuperChange(op);\r |
277 | CheckInterrupt(op);\r |
278 | }\r |
279 | \r |
280 | OpEnd();\r |
281 | if (size) SuperEnd(op);\r |
282 | \r |
283 | return 0;\r |
284 | }\r |
285 | \r |
286 | // --------------------- Opcodes 0x4850+ ---------------------\r |
287 | // Emit an Pea opcode, 01001000 01aaaaaa\r |
288 | int OpPea(int op)\r |
289 | {\r |
290 | int use=0;\r |
291 | int ea=0;\r |
292 | \r |
293 | ea=op&0x003f; if (ea<0x10) return 1; // Swap opcode\r |
294 | if (EaCanRead(ea,-1)==0) return 1; // See if we can do this opcode:\r |
295 | \r |
296 | use=OpBase(op);\r |
297 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
298 | \r |
299 | OpStart(op);\r |
300 | \r |
301 | ot(" ldr r10,[r7,#0x3c]\n");\r |
302 | EaCalc (1,0x003f, ea,0);\r |
303 | ot("\n");\r |
304 | ot(" sub r0,r10,#4 ;@ Predecrement A7\n");\r |
305 | ot(" str r0,[r7,#0x3c] ;@ Save A7\n");\r |
306 | ot("\n");\r |
307 | MemHandler(1,2); // Write 32-bit\r |
308 | ot("\n");\r |
309 | \r |
310 | Cycles=6+Ea_add_ns(g_pea_cycle_table,ea);\r |
311 | \r |
312 | OpEnd();\r |
313 | \r |
314 | return 0;\r |
315 | }\r |
316 | \r |
317 | // --------------------- Opcodes 0x4880+ ---------------------\r |
318 | // Emit a Movem opcode, 01001d00 1xeeeeee regmask\r |
319 | int OpMovem(int op)\r |
320 | {\r |
321 | int size=0,ea=0,cea=0,dir=0;\r |
322 | int use=0,decr=0,change=0;\r |
323 | \r |
324 | size=((op>>6)&1)+1; // word, long\r |
325 | ea=op&0x003f;\r |
326 | dir=(op>>10)&1; // Direction (1==ea2reg)\r |
327 | \r |
328 | if (dir) {\r |
329 | if (ea<0x10 || ea>0x3b || (ea&0x38)==0x20) return 1; // Invalid EA\r |
330 | } else {\r |
331 | if (ea<0x10 || ea>0x39 || (ea&0x38)==0x18) return 1;\r |
332 | }\r |
333 | \r |
334 | if ((ea&0x38)==0x18 || (ea&0x38)==0x20) change=1;\r |
335 | if ((ea&0x38)==0x20) decr=1; // -(An), bitfield is decr\r |
336 | \r |
337 | cea=ea; if (change) cea=0x10;\r |
338 | \r |
339 | use=OpBase(op);\r |
340 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
341 | \r |
342 | OpStart(op);\r |
343 | \r |
344 | ot(" stmdb sp!,{r9} ;@ Push r9\n"); // can't just use r12 or lr here, because memhandlers touch them\r |
345 | ot(" ldrh r11,[r4],#2 ;@ r11=register mask\n");\r |
346 | \r |
347 | ot("\n");\r |
348 | ot(";@ Get the address into r9:\n");\r |
349 | EaCalc(9,0x003f,cea,size);\r |
350 | \r |
351 | ot(";@ r10=Register Index*4:\n");\r |
352 | if (decr) ot(" mov r10,#0x3c ;@ order reversed for -(An)\n");\r |
353 | else ot(" mov r10,#0\n");\r |
354 | \r |
355 | ot("\n");\r |
356 | ot("MoreReg%.4x%s\n",op, ms?"":":");\r |
357 | \r |
358 | ot(" tst r11,#1\n");\r |
359 | ot(" beq SkipReg%.4x\n",op);\r |
360 | ot("\n");\r |
361 | \r |
362 | if (decr) ot(" sub r9,r9,#%d ;@ Pre-decrement address\n",1<<size);\r |
363 | \r |
364 | if (dir)\r |
365 | {\r |
366 | ot(" ;@ Copy memory to register:\n",1<<size);\r |
367 | EaRead (9,0,ea,size,0x003f);\r |
368 | ot(" str r0,[r7,r10] ;@ Save value into Dn/An\n");\r |
369 | }\r |
370 | else\r |
371 | {\r |
372 | ot(" ;@ Copy register to memory:\n",1<<size);\r |
373 | ot(" ldr r1,[r7,r10] ;@ Load value from Dn/An\n");\r |
374 | EaWrite(9,1,ea,size,0x003f);\r |
375 | }\r |
376 | \r |
377 | if (decr==0) ot(" add r9,r9,#%d ;@ Post-increment address\n",1<<size);\r |
378 | \r |
379 | ot(" sub r5,r5,#%d ;@ Take some cycles\n",2<<size);\r |
380 | ot("\n");\r |
381 | ot("SkipReg%.4x%s\n",op, ms?"":":");\r |
382 | ot(" movs r11,r11,lsr #1;@ Shift mask:\n");\r |
383 | ot(" add r10,r10,#%d ;@ r10=Next Register\n",decr?-4:4);\r |
384 | ot(" bne MoreReg%.4x\n",op);\r |
385 | ot("\n");\r |
386 | \r |
387 | if (change)\r |
388 | {\r |
389 | ot(";@ Write back address:\n");\r |
390 | EaCalc (0,0x0007,8|(ea&7),2);\r |
391 | EaWrite(0, 9,8|(ea&7),2,0x0007);\r |
392 | }\r |
393 | \r |
394 | ot(" ldmia sp!,{r9} ;@ Pop r9\n");\r |
395 | ot("\n");\r |
396 | \r |
397 | if(dir) { // er\r |
398 | if (ea==0x3a) Cycles=16; // ($nn,PC)\r |
399 | else if (ea==0x3b) Cycles=18; // ($nn,pc,Rn)\r |
400 | else Cycles=12;\r |
401 | } else {\r |
402 | Cycles=8;\r |
403 | }\r |
404 | \r |
405 | Cycles+=Ea_add_ns(g_movem_cycle_table,ea);\r |
406 | \r |
407 | OpEnd();\r |
408 | \r |
409 | return 0;\r |
410 | }\r |
411 | \r |
412 | // --------------------- Opcodes 0x4e60+ ---------------------\r |
413 | // Emit a Move USP opcode, 01001110 0110dnnn move An to/from USP\r |
414 | int OpMoveUsp(int op)\r |
415 | {\r |
416 | int use=0,dir=0;\r |
417 | \r |
418 | dir=(op>>3)&1; // Direction\r |
419 | use=op&~0x0007; // Use same opcode for all An\r |
420 | \r |
421 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
422 | \r |
423 | OpStart(op); Cycles=4;\r |
424 | \r |
425 | SuperCheck(op);\r |
426 | \r |
427 | if (dir)\r |
428 | {\r |
429 | ot(" ldr r1,[r7,#0x48] ;@ Get from USP\n\n");\r |
430 | EaCalc (0,0x0007,8,2,1);\r |
431 | EaWrite(0, 1,8,2,0x0007,1);\r |
432 | }\r |
433 | else\r |
434 | {\r |
435 | EaCalc (0,0x0007,8,2,1);\r |
436 | EaRead (0, 0,8,2,0x0007,1);\r |
437 | ot(" str r0,[r7,#0x48] ;@ Put in USP\n\n");\r |
438 | }\r |
439 | \r |
440 | OpEnd();\r |
441 | \r |
442 | SuperEnd(op);\r |
443 | \r |
444 | return 0;\r |
445 | }\r |
446 | \r |
447 | // --------------------- Opcodes 0x7000+ ---------------------\r |
448 | // Emit a Move Quick opcode, 0111nnn0 dddddddd moveq #dd,Dn\r |
449 | int OpMoveq(int op)\r |
450 | {\r |
451 | int use=0;\r |
452 | \r |
453 | use=op&0xf100; // Use same opcode for all values\r |
454 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
455 | \r |
456 | OpStart(op); Cycles=4;\r |
457 | \r |
458 | ot(" movs r0,r8,asl #24\n");\r |
459 | ot(" and r1,r8,#0x0e00\n");\r |
460 | ot(" mov r0,r0,asr #24 ;@ Sign extended Quick value\n");\r |
461 | ot(" mrs r9,cpsr ;@ r9=NZ flags\n");\r |
462 | ot(" str r0,[r7,r1,lsr #7] ;@ Store into Dn\n");\r |
463 | ot("\n");\r |
464 | \r |
465 | OpEnd();\r |
466 | \r |
467 | return 0;\r |
468 | }\r |
469 | \r |
470 | // --------------------- Opcodes 0xc140+ ---------------------\r |
471 | // Emit a Exchange opcode:\r |
472 | // 1100ttt1 01000sss exg ds,dt\r |
473 | // 1100ttt1 01001sss exg as,at\r |
474 | // 1100ttt1 10001sss exg as,dt\r |
475 | int OpExg(int op)\r |
476 | {\r |
477 | int use=0,type=0;\r |
478 | \r |
479 | type=op&0xf8;\r |
480 | \r |
481 | if (type!=0x40 && type!=0x48 && type!=0x88) return 1; // Not an exg opcode\r |
482 | \r |
483 | use=op&0xf1f8; // Use same opcode for all values\r |
484 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
485 | \r |
486 | OpStart(op); Cycles=6;\r |
487 | \r |
488 | ot(" and r10,r8,#0x0e00 ;@ Find T register\n");\r |
489 | ot(" and r11,r8,#0x000f ;@ Find S register\n");\r |
490 | if (type==0x48) ot(" orr r10,r10,#0x1000 ;@ T is an address register\n");\r |
491 | ot("\n");\r |
492 | ot(" ldr r0,[r7,r10,lsr #7] ;@ Get T\n");\r |
493 | ot(" ldr r1,[r7,r11,lsl #2] ;@ Get S\n");\r |
494 | ot("\n");\r |
495 | ot(" str r0,[r7,r11,lsl #2] ;@ T->S\n");\r |
496 | ot(" str r1,[r7,r10,lsr #7] ;@ S->T\n"); \r |
497 | ot("\n");\r |
498 | \r |
499 | OpEnd();\r |
500 | \r |
501 | return 0;\r |
502 | }\r |
503 | \r |
504 | // ------------------------- movep -------------------------------\r |
505 | // 0000ddd1 0z001sss\r |
506 | // 0000sss1 1z001ddd (to mem)\r |
507 | int OpMovep(int op)\r |
508 | {\r |
509 | int ea=0;\r |
510 | int size=1,use=0,dir;\r |
511 | \r |
512 | use=op&0xf1f8;\r |
513 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler (for all dests, srcs)\r |
514 | \r |
515 | // Get EA\r |
516 | ea = (op&0x0007)|0x28;\r |
517 | dir = (op>>7)&1;\r |
518 | \r |
519 | // Find size extension\r |
520 | if(op&0x0040) size=2;\r |
521 | \r |
522 | OpStart(op);\r |
523 | \r |
524 | if(dir) { // reg to mem\r |
525 | EaCalc(11,0x0e00,0,size); // reg number -> r11\r |
526 | EaRead(11,11,0,size,0x0e00); // regval -> r11\r |
527 | EaCalc(10,0x0007,ea,size);\r |
528 | if(size==2) { // if operand is long\r |
529 | ot(" mov r1,r11,lsr #24 ;@ first byte\n");\r |
530 | EaWrite(10,1,ea,0,0x0007); // store first byte\r |
531 | ot(" add r10,r10,#2\n");\r |
532 | ot(" mov r1,r11,lsr #16 ;@ second byte\n");\r |
533 | EaWrite(10,1,ea,0,0x0007); // store second byte\r |
534 | ot(" add r10,r10,#2\n");\r |
535 | }\r |
536 | ot(" mov r1,r11,lsr #8 ;@ first or third byte\n");\r |
537 | EaWrite(10,1,ea,0,0x0007);\r |
538 | ot(" add r10,r10,#2\n");\r |
539 | ot(" and r1,r11,#0xff\n");\r |
540 | EaWrite(10,1,ea,0,0x0007);\r |
541 | } else { // mem to reg\r |
542 | EaCalc(10,0x0007,ea,size,1);\r |
543 | EaRead(10,11,ea,0,0x0007,1); // read first byte\r |
544 | ot(" add r10,r10,#2\n");\r |
545 | EaRead(10,1,ea,0,0x0007,1); // read second byte\r |
546 | if(size==2) { // if operand is long\r |
547 | ot(" orr r11,r11,r1,lsr #8 ;@ second byte\n");\r |
548 | ot(" add r10,r10,#2\n");\r |
549 | EaRead(10,1,ea,0,0x0007,1);\r |
550 | ot(" orr r11,r11,r1,lsr #16 ;@ third byte\n");\r |
551 | ot(" add r10,r10,#2\n");\r |
552 | EaRead(10,1,ea,0,0x0007,1);\r |
553 | ot(" orr r0,r11,r1,lsr #24 ;@ fourth byte\n");\r |
554 | } else {\r |
555 | ot(" orr r0,r11,r1,lsr #8 ;@ second byte\n");\r |
556 | }\r |
557 | // store the result\r |
558 | EaCalc(11,0x0e00,0,size,1); // reg number -> r11\r |
559 | EaWrite(11,0,0,size,0x0e00,1);\r |
560 | }\r |
561 | \r |
562 | Cycles=(size==2)?24:16;\r |
563 | OpEnd();\r |
564 | \r |
565 | return 0;\r |
566 | }\r |
567 | \r |
568 | // Emit a Stop/Reset opcodes, 01001110 011100t0 imm\r |
569 | int OpStopReset(int op)\r |
570 | {\r |
571 | int type=(op>>1)&1; // reset/stop\r |
572 | \r |
573 | OpStart(op);\r |
574 | \r |
575 | SuperCheck(op);\r |
576 | \r |
577 | if(type) {\r |
578 | // copy immediate to SR, stop the CPU and eat all remaining cycles.\r |
579 | ot(" ldrh r0,[r4],#2 ;@ Fetch the immediate\n");\r |
580 | SuperChange(op);\r |
581 | OpRegToFlags(1);\r |
582 | \r |
583 | ot("\n");\r |
584 | \r |
585 | ot(" mov r0,#1\n");\r |
586 | ot(" str r0,[r7,#0x58] ;@ stopped\n");\r |
587 | ot("\n");\r |
588 | \r |
589 | ot(" mov r5,#0 ;@ eat cycles\n");\r |
590 | Cycles = 4;\r |
591 | ot("\n");\r |
592 | }\r |
593 | else\r |
594 | {\r |
595 | Cycles = 132;\r |
596 | #if USE_RESET_CALLBACK\r |
597 | ot(" str r4,[r7,#0x40] ;@ Save PC\n");\r |
598 | ot(" mov r1,r9,lsr #28\n");\r |
599 | ot(" strb r1,[r7,#0x46] ;@ Save Flags (NZCV)\n");\r |
600 | ot(" str r5,[r7,#0x5c] ;@ Save Cycles\n");\r |
601 | ot(" ldr r11,[r7,#0x90] ;@ ResetCallback\n");\r |
602 | ot(" tst r11,r11\n");\r |
603 | ot(" movne lr,pc\n");\r |
604 | ot(" movne pc,r11 ;@ call ResetCallback if it is defined\n");\r |
605 | ot(" ldrb r9,[r7,#0x46] ;@ r9 = Load Flags (NZCV)\n");\r |
606 | ot(" ldr r5,[r7,#0x5c] ;@ Load Cycles\n");\r |
607 | ot(" ldr r4,[r7,#0x40] ;@ Load PC\n");\r |
608 | ot(" mov r9,r9,lsl #28\n");\r |
609 | #endif\r |
610 | }\r |
611 | \r |
612 | OpEnd();\r |
613 | SuperEnd(op);\r |
614 | \r |
615 | return 0;\r |
616 | }\r |