| 1 | \r |
| 2 | #include "app.h"\r |
| 3 | \r |
| 4 | \r |
| 5 | // Pack our flags into r1, in SR/CCR register format\r |
| 6 | // trashes r0,r2\r |
| 7 | void OpFlagsToReg(int high)\r |
| 8 | {\r |
| 9 | ot(" ldr r0,[r7,#0x4c] ;@ X bit\n");\r |
| 10 | ot(" mov r1,r9,lsr #28 ;@ ____NZCV\n");\r |
| 11 | ot(" eor r2,r1,r1,ror #1 ;@ Bit 0=C^V\n");\r |
| 12 | ot(" tst r2,#1 ;@ 1 if C!=V\n");\r |
| 13 | ot(" eorne r1,r1,#3 ;@ ____NZVC\n");\r |
| 14 | ot("\n");\r |
| 15 | if (high) ot(" ldrb r2,[r7,#0x44] ;@ Include SR high\n");\r |
| 16 | ot(" and r0,r0,#0x20000000\n");\r |
| 17 | ot(" orr r1,r1,r0,lsr #25 ;@ ___XNZVC\n");\r |
| 18 | if (high) ot(" orr r1,r1,r2,lsl #8\n");\r |
| 19 | ot("\n");\r |
| 20 | }\r |
| 21 | \r |
| 22 | // Convert SR/CRR register in r0 to our flags\r |
| 23 | // trashes r0,r1\r |
| 24 | void OpRegToFlags(int high)\r |
| 25 | {\r |
| 26 | ot(" eor r1,r0,r0,ror #1 ;@ Bit 0=C^V\n");\r |
| 27 | ot(" mov r2,r0,lsl #25\n");\r |
| 28 | ot(" tst r1,#1 ;@ 1 if C!=V\n");\r |
| 29 | ot(" eorne r0,r0,#3 ;@ ___XNZCV\n");\r |
| 30 | ot(" str r2,[r7,#0x4c] ;@ Store X bit\n");\r |
| 31 | ot(" mov r9,r0,lsl #28 ;@ r9=NZCV...\n");\r |
| 32 | \r |
| 33 | if (high)\r |
| 34 | {\r |
| 35 | ot(" mov r0,r0,ror #8\n");\r |
| 36 | ot(" and r0,r0,#0xa7 ;@ only take defined bits\n");\r |
| 37 | ot(" strb r0,[r7,#0x44] ;@ Store SR high\n");\r |
| 38 | }\r |
| 39 | ot("\n");\r |
| 40 | }\r |
| 41 | \r |
| 42 | // checks for supervisor bit, if not set, jumps to SuperEnd()\r |
| 43 | // also sets r11 to SR high value, SuperChange() uses this\r |
| 44 | void SuperCheck(int op)\r |
| 45 | {\r |
| 46 | ot(" ldr r11,[r7,#0x44] ;@ Get SR high\n");\r |
| 47 | ot(" tst r11,#0x20 ;@ Check we are in supervisor mode\n");\r |
| 48 | ot(" beq WrongPrivilegeMode ;@ No\n");\r |
| 49 | ot("\n");\r |
| 50 | }\r |
| 51 | \r |
| 52 | void SuperEnd(void)\r |
| 53 | {\r |
| 54 | ot(";@ ----------\n");\r |
| 55 | ot(";@ tried execute privileged instruction in user mode\n");\r |
| 56 | ot("WrongPrivilegeMode%s\n",ms?"":":");\r |
| 57 | ot(" sub r4,r4,#2 ;@ last opcode wasn't executed - go back\n");\r |
| 58 | ot(" mov r0,#0x20 ;@ privilege violation\n");\r |
| 59 | ot(" bl Exception\n");\r |
| 60 | Cycles=34;\r |
| 61 | OpEnd(0x10);\r |
| 62 | }\r |
| 63 | \r |
| 64 | // does OSP and A7 swapping if needed\r |
| 65 | // new or old SR (not the one already in [r7,#0x44]) should be passed in r11\r |
| 66 | // trashes r0,r11\r |
| 67 | void SuperChange(int op,int load_srh)\r |
| 68 | {\r |
| 69 | ot(";@ A7 <-> OSP?\n");\r |
| 70 | if (load_srh)\r |
| 71 | ot(" ldr r0,[r7,#0x44] ;@ Get other SR high\n");\r |
| 72 | ot(" eor r0,r0,r11\n");\r |
| 73 | ot(" tst r0,#0x20\n");\r |
| 74 | ot(" beq no_sp_swap%.4x\n",op);\r |
| 75 | ot(" ;@ swap OSP and A7:\n");\r |
| 76 | ot(" ldr r11,[r7,#0x3C] ;@ Get A7\n");\r |
| 77 | ot(" ldr r0, [r7,#0x48] ;@ Get OSP\n");\r |
| 78 | ot(" str r11,[r7,#0x48]\n");\r |
| 79 | ot(" str r0, [r7,#0x3C]\n");\r |
| 80 | ot("no_sp_swap%.4x%s\n", op, ms?"":":");\r |
| 81 | }\r |
| 82 | \r |
| 83 | \r |
| 84 | \r |
| 85 | // --------------------- Opcodes 0x1000+ ---------------------\r |
| 86 | // Emit a Move opcode, 00xxdddd ddssssss\r |
| 87 | int OpMove(int op)\r |
| 88 | {\r |
| 89 | int sea=0,tea=0;\r |
| 90 | int size=0,use=0;\r |
| 91 | int movea=0;\r |
| 92 | \r |
| 93 | // Get source and target EA\r |
| 94 | sea = op&0x003f;\r |
| 95 | tea =(op&0x01c0)>>3;\r |
| 96 | tea|=(op&0x0e00)>>9;\r |
| 97 | \r |
| 98 | if (tea>=8 && tea<0x10) movea=1;\r |
| 99 | \r |
| 100 | // Find size extension\r |
| 101 | switch (op&0x3000)\r |
| 102 | {\r |
| 103 | default: return 1;\r |
| 104 | case 0x1000: size=0; break;\r |
| 105 | case 0x3000: size=1; break;\r |
| 106 | case 0x2000: size=2; break;\r |
| 107 | }\r |
| 108 | \r |
| 109 | if (size<1 && (movea || EaAn(sea))) return 1; // move.b An,* and movea.b * are invalid\r |
| 110 | \r |
| 111 | // See if we can do this opcode:\r |
| 112 | if (EaCanRead (sea,size)==0) return 1;\r |
| 113 | if (EaCanWrite(tea )==0) return 1;\r |
| 114 | \r |
| 115 | use=OpBase(op,size);\r |
| 116 | if (tea<0x38) use&=~0x0e00; // Use same handler for register ?0-7\r |
| 117 | \r |
| 118 | if (tea==0x1f || tea==0x27) use|=0x0e00; // Specific handler for (a7)+ and -(a7)\r |
| 119 | \r |
| 120 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
| 121 | \r |
| 122 | OpStart(op,sea,tea); Cycles=4;\r |
| 123 | \r |
| 124 | EaCalcRead(-1,1,sea,size,0x003f);\r |
| 125 | \r |
| 126 | if (movea==0)\r |
| 127 | {\r |
| 128 | ot(" adds r1,r1,#0 ;@ Defines NZ, clears CV\n");\r |
| 129 | ot(" mrs r9,cpsr ;@ r9=NZCV flags\n");\r |
| 130 | ot("\n");\r |
| 131 | }\r |
| 132 | \r |
| 133 | if (movea) size=2; // movea always expands to 32-bits\r |
| 134 | \r |
| 135 | #if SPLIT_MOVEL_PD\r |
| 136 | EaCalc (10,0x0e00,tea,size,0,0);\r |
| 137 | if ((tea&0x38)==0x20 && size==2) { // -(An)\r |
| 138 | ot(" mov r11,r1\n");\r |
| 139 | ot(" add r0,r10,#2\n");\r |
| 140 | EaWrite(0, 1,tea,1,0x0e00,0,0);\r |
| 141 | EaWrite(10, 11,tea,1,0x0e00,1);\r |
| 142 | } else {\r |
| 143 | EaWrite(0, 1,tea,size,0x0e00,0,0);\r |
| 144 | }\r |
| 145 | #else\r |
| 146 | EaCalc (0,0x0e00,tea,size,0,0);\r |
| 147 | EaWrite(0, 1,tea,size,0x0e00,0,0);\r |
| 148 | #endif\r |
| 149 | \r |
| 150 | #if CYCLONE_FOR_GENESIS && !MEMHANDLERS_CHANGE_CYCLES\r |
| 151 | // this is a bit hacky\r |
| 152 | if ((tea==0x39||(tea&0x38)==0x10)&&size>=1)\r |
| 153 | ot(" ldr r5,[r7,#0x5c] ;@ Load Cycles\n");\r |
| 154 | #endif\r |
| 155 | \r |
| 156 | if((tea&0x38)==0x20) Cycles-=2; // less cycles when dest is -(An)\r |
| 157 | \r |
| 158 | OpEnd(sea,tea);\r |
| 159 | return 0;\r |
| 160 | }\r |
| 161 | \r |
| 162 | // --------------------- Opcodes 0x41c0+ ---------------------\r |
| 163 | // Emit an Lea opcode, 0100nnn1 11aaaaaa\r |
| 164 | int OpLea(int op)\r |
| 165 | {\r |
| 166 | int use=0;\r |
| 167 | int sea=0,tea=0;\r |
| 168 | \r |
| 169 | sea= op&0x003f;\r |
| 170 | tea=(op&0x0e00)>>9; tea|=8;\r |
| 171 | \r |
| 172 | if (EaCanRead(sea,-1)==0) return 1; // See if we can do this opcode\r |
| 173 | \r |
| 174 | use=OpBase(op,0);\r |
| 175 | use&=~0x0e00; // Also use 1 handler for target ?0-7\r |
| 176 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
| 177 | \r |
| 178 | OpStart(op,sea,tea);\r |
| 179 | \r |
| 180 | EaCalc (1,0x003f,sea,0); // Lea\r |
| 181 | EaCalc (0,0x0e00,tea,2);\r |
| 182 | EaWrite(0, 1,tea,2,0x0e00);\r |
| 183 | \r |
| 184 | Cycles=Ea_add_ns(g_lea_cycle_table,sea);\r |
| 185 | \r |
| 186 | OpEnd(sea,tea);\r |
| 187 | \r |
| 188 | return 0;\r |
| 189 | }\r |
| 190 | \r |
| 191 | // --------------------- Opcodes 0x40c0+ ---------------------\r |
| 192 | // Move SR opcode, 01000tt0 11aaaaaa move SR\r |
| 193 | int OpMoveSr(int op)\r |
| 194 | {\r |
| 195 | int type=0,ea=0;\r |
| 196 | int use=0,size=1;\r |
| 197 | \r |
| 198 | type=(op>>9)&3; // from SR, from CCR, to CCR, to SR\r |
| 199 | ea=op&0x3f;\r |
| 200 | \r |
| 201 | if(EaAn(ea)) return 1; // can't use An regs\r |
| 202 | \r |
| 203 | switch(type)\r |
| 204 | {\r |
| 205 | case 0:\r |
| 206 | if (EaCanWrite(ea)==0) return 1; // See if we can do this opcode:\r |
| 207 | break;\r |
| 208 | \r |
| 209 | case 1:\r |
| 210 | return 1; // no such op in 68000\r |
| 211 | \r |
| 212 | case 2: case 3:\r |
| 213 | if (EaCanRead(ea,size)==0) return 1; // See if we can do this opcode:\r |
| 214 | break;\r |
| 215 | }\r |
| 216 | \r |
| 217 | use=OpBase(op,size);\r |
| 218 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
| 219 | \r |
| 220 | OpStart(op,ea);\r |
| 221 | Cycles=12;\r |
| 222 | if (type==0) Cycles=(ea>=8)?8:6;\r |
| 223 | \r |
| 224 | if (type==3) SuperCheck(op); // 68000 model allows reading whole SR in user mode (but newer models don't)\r |
| 225 | \r |
| 226 | if (type==0 || type==1)\r |
| 227 | {\r |
| 228 | OpFlagsToReg(type==0);\r |
| 229 | EaCalc (0,0x003f,ea,size,0,0);\r |
| 230 | EaWrite(0, 1,ea,size,0x003f,0,0);\r |
| 231 | }\r |
| 232 | \r |
| 233 | if (type==2 || type==3)\r |
| 234 | {\r |
| 235 | EaCalcReadNoSE(-1,0,ea,size,0x003f);\r |
| 236 | OpRegToFlags(type==3);\r |
| 237 | if (type==3) {\r |
| 238 | SuperChange(op,0);\r |
| 239 | CheckInterrupt(op);\r |
| 240 | }\r |
| 241 | }\r |
| 242 | \r |
| 243 | OpEnd(ea);\r |
| 244 | \r |
| 245 | return 0;\r |
| 246 | }\r |
| 247 | \r |
| 248 | \r |
| 249 | // Ori/Andi/Eori $nnnn,sr 0000t0t0 01111100\r |
| 250 | int OpArithSr(int op)\r |
| 251 | {\r |
| 252 | int type=0,ea=0;\r |
| 253 | int use=0,size=0;\r |
| 254 | \r |
| 255 | type=(op>>9)&5; if (type==4) return 1;\r |
| 256 | size=(op>>6)&1; // ccr or sr?\r |
| 257 | ea=0x3c;\r |
| 258 | \r |
| 259 | use=OpBase(op,size);\r |
| 260 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
| 261 | \r |
| 262 | OpStart(op,ea); Cycles=16;\r |
| 263 | \r |
| 264 | if (size) SuperCheck(op);\r |
| 265 | \r |
| 266 | EaCalc(10,0x003f,ea,size);\r |
| 267 | EaRead(10, 10,ea,size,0x003f);\r |
| 268 | \r |
| 269 | OpFlagsToReg(size);\r |
| 270 | if (type==0) ot(" orr r0,r1,r10\n");\r |
| 271 | if (type==1) ot(" and r0,r1,r10\n");\r |
| 272 | if (type==5) ot(" eor r0,r1,r10\n");\r |
| 273 | OpRegToFlags(size);\r |
| 274 | if (size) {\r |
| 275 | SuperChange(op,0);\r |
| 276 | CheckInterrupt(op);\r |
| 277 | }\r |
| 278 | \r |
| 279 | OpEnd(ea);\r |
| 280 | \r |
| 281 | return 0;\r |
| 282 | }\r |
| 283 | \r |
| 284 | // --------------------- Opcodes 0x4850+ ---------------------\r |
| 285 | // Emit an Pea opcode, 01001000 01aaaaaa\r |
| 286 | int OpPea(int op)\r |
| 287 | {\r |
| 288 | int use=0;\r |
| 289 | int ea=0;\r |
| 290 | \r |
| 291 | ea=op&0x003f; if (ea<0x10) return 1; // Swap opcode\r |
| 292 | if (EaCanRead(ea,-1)==0) return 1; // See if we can do this opcode:\r |
| 293 | \r |
| 294 | use=OpBase(op,0);\r |
| 295 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
| 296 | \r |
| 297 | OpStart(op,ea);\r |
| 298 | \r |
| 299 | ot(" ldr r10,[r7,#0x3c]\n");\r |
| 300 | EaCalc (1,0x003f, ea,0);\r |
| 301 | ot("\n");\r |
| 302 | ot(" sub r0,r10,#4 ;@ Predecrement A7\n");\r |
| 303 | ot(" str r0,[r7,#0x3c] ;@ Save A7\n");\r |
| 304 | ot("\n");\r |
| 305 | MemHandler(1,2); // Write 32-bit\r |
| 306 | ot("\n");\r |
| 307 | \r |
| 308 | Cycles=6+Ea_add_ns(g_pea_cycle_table,ea);\r |
| 309 | \r |
| 310 | OpEnd(ea);\r |
| 311 | \r |
| 312 | return 0;\r |
| 313 | }\r |
| 314 | \r |
| 315 | // --------------------- Opcodes 0x4880+ ---------------------\r |
| 316 | // Emit a Movem opcode, 01001d00 1xeeeeee regmask\r |
| 317 | int OpMovem(int op)\r |
| 318 | {\r |
| 319 | int size=0,ea=0,cea=0,dir=0;\r |
| 320 | int use=0,decr=0,change=0;\r |
| 321 | \r |
| 322 | size=((op>>6)&1)+1; // word, long\r |
| 323 | ea=op&0x003f;\r |
| 324 | dir=(op>>10)&1; // Direction (1==ea2reg)\r |
| 325 | \r |
| 326 | if (dir) {\r |
| 327 | if (ea<0x10 || ea>0x3b || (ea&0x38)==0x20) return 1; // Invalid EA\r |
| 328 | } else {\r |
| 329 | if (ea<0x10 || ea>0x39 || (ea&0x38)==0x18) return 1;\r |
| 330 | }\r |
| 331 | \r |
| 332 | if ((ea&0x38)==0x18 || (ea&0x38)==0x20) change=1;\r |
| 333 | if ((ea&0x38)==0x20) decr=1; // -(An), bitfield is decr\r |
| 334 | \r |
| 335 | cea=ea; if (change) cea=0x10;\r |
| 336 | \r |
| 337 | use=OpBase(op,size);\r |
| 338 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
| 339 | \r |
| 340 | OpStart(op,ea);\r |
| 341 | \r |
| 342 | ot(" ldrh r11,[r4],#2 ;@ r11=register mask\n");\r |
| 343 | \r |
| 344 | ot(";@ r10=Register Index*4:\n");\r |
| 345 | if (decr) ot(" mov r10,#0x40 ;@ order reversed for -(An)\n");\r |
| 346 | else ot(" mov r10,#-4\n");\r |
| 347 | \r |
| 348 | ot("\n");\r |
| 349 | ot(";@ Get the address into r6:\n");\r |
| 350 | EaCalc(6,0x003f,cea,size);\r |
| 351 | \r |
| 352 | ot("\n");\r |
| 353 | ot(" tst r11,r11\n"); // sanity check\r |
| 354 | ot(" beq NoRegs%.4x\n",op);\r |
| 355 | \r |
| 356 | ot("\n");\r |
| 357 | ot("Movemloop%.4x%s\n",op, ms?"":":");\r |
| 358 | ot(" add r10,r10,#%d ;@ r10=Next Register\n",decr?-4:4);\r |
| 359 | ot(" movs r11,r11,lsr #1\n");\r |
| 360 | ot(" bcc Movemloop%.4x\n",op);\r |
| 361 | ot("\n");\r |
| 362 | \r |
| 363 | if (decr) ot(" sub r6,r6,#%d ;@ Pre-decrement address\n",1<<size);\r |
| 364 | \r |
| 365 | if (dir)\r |
| 366 | {\r |
| 367 | ot(" ;@ Copy memory to register:\n",1<<size);\r |
| 368 | EaRead (6,0,ea,size,0x003f);\r |
| 369 | ot(" str r0,[r7,r10] ;@ Save value into Dn/An\n");\r |
| 370 | }\r |
| 371 | else\r |
| 372 | {\r |
| 373 | ot(" ;@ Copy register to memory:\n",1<<size);\r |
| 374 | ot(" ldr r1,[r7,r10] ;@ Load value from Dn/An\n");\r |
| 375 | EaWrite(6,1,ea,size,0x003f);\r |
| 376 | }\r |
| 377 | \r |
| 378 | if (decr==0) ot(" add r6,r6,#%d ;@ Post-increment address\n",1<<size);\r |
| 379 | \r |
| 380 | ot(" sub r5,r5,#%d ;@ Take some cycles\n",2<<size);\r |
| 381 | ot(" tst r11,r11\n");\r |
| 382 | ot(" bne Movemloop%.4x\n",op);\r |
| 383 | ot("\n");\r |
| 384 | \r |
| 385 | if (change)\r |
| 386 | {\r |
| 387 | ot(";@ Write back address:\n");\r |
| 388 | EaCalc (0,0x0007,8|(ea&7),2);\r |
| 389 | EaWrite(0, 6,8|(ea&7),2,0x0007);\r |
| 390 | }\r |
| 391 | \r |
| 392 | ot("NoRegs%.4x%s\n",op, ms?"":":");\r |
| 393 | ot(" ldr r6,=CycloneJumpTab ;@ restore Opcode Jump table\n");\r |
| 394 | ot("\n");\r |
| 395 | \r |
| 396 | if(dir) { // er\r |
| 397 | if (ea==0x3a) Cycles=16; // ($nn,PC)\r |
| 398 | else if (ea==0x3b) Cycles=18; // ($nn,pc,Rn)\r |
| 399 | else Cycles=12;\r |
| 400 | } else {\r |
| 401 | Cycles=8;\r |
| 402 | }\r |
| 403 | \r |
| 404 | Cycles+=Ea_add_ns(g_movem_cycle_table,ea);\r |
| 405 | \r |
| 406 | OpEnd(ea);\r |
| 407 | ltorg();\r |
| 408 | ot("\n");\r |
| 409 | \r |
| 410 | return 0;\r |
| 411 | }\r |
| 412 | \r |
| 413 | // --------------------- Opcodes 0x4e60+ ---------------------\r |
| 414 | // Emit a Move USP opcode, 01001110 0110dnnn move An to/from USP\r |
| 415 | int OpMoveUsp(int op)\r |
| 416 | {\r |
| 417 | int use=0,dir=0;\r |
| 418 | \r |
| 419 | dir=(op>>3)&1; // Direction\r |
| 420 | use=op&~0x0007; // Use same opcode for all An\r |
| 421 | \r |
| 422 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
| 423 | \r |
| 424 | OpStart(op); Cycles=4;\r |
| 425 | \r |
| 426 | SuperCheck(op);\r |
| 427 | \r |
| 428 | if (dir)\r |
| 429 | {\r |
| 430 | ot(" ldr r1,[r7,#0x48] ;@ Get from USP\n\n");\r |
| 431 | EaCalc (0,0x000f,8,2,1);\r |
| 432 | EaWrite(0, 1,8,2,0x000f,1);\r |
| 433 | }\r |
| 434 | else\r |
| 435 | {\r |
| 436 | EaCalc (0,0x000f,8,2,1);\r |
| 437 | EaRead (0, 0,8,2,0x000f,1);\r |
| 438 | ot(" str r0,[r7,#0x48] ;@ Put in USP\n\n");\r |
| 439 | }\r |
| 440 | \r |
| 441 | OpEnd();\r |
| 442 | \r |
| 443 | return 0;\r |
| 444 | }\r |
| 445 | \r |
| 446 | // --------------------- Opcodes 0x7000+ ---------------------\r |
| 447 | // Emit a Move Quick opcode, 0111nnn0 dddddddd moveq #dd,Dn\r |
| 448 | int OpMoveq(int op)\r |
| 449 | {\r |
| 450 | int use=0;\r |
| 451 | \r |
| 452 | use=op&0xf100; // Use same opcode for all values\r |
| 453 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
| 454 | \r |
| 455 | OpStart(op); Cycles=4;\r |
| 456 | \r |
| 457 | ot(" movs r0,r8,asl #24\n");\r |
| 458 | ot(" and r1,r8,#0x0e00\n");\r |
| 459 | ot(" mov r0,r0,asr #24 ;@ Sign extended Quick value\n");\r |
| 460 | ot(" mrs r9,cpsr ;@ r9=NZ flags\n");\r |
| 461 | ot(" str r0,[r7,r1,lsr #7] ;@ Store into Dn\n");\r |
| 462 | ot("\n");\r |
| 463 | \r |
| 464 | OpEnd();\r |
| 465 | \r |
| 466 | return 0;\r |
| 467 | }\r |
| 468 | \r |
| 469 | // --------------------- Opcodes 0xc140+ ---------------------\r |
| 470 | // Emit a Exchange opcode:\r |
| 471 | // 1100ttt1 01000sss exg ds,dt\r |
| 472 | // 1100ttt1 01001sss exg as,at\r |
| 473 | // 1100ttt1 10001sss exg as,dt\r |
| 474 | int OpExg(int op)\r |
| 475 | {\r |
| 476 | int use=0,type=0;\r |
| 477 | \r |
| 478 | type=op&0xf8;\r |
| 479 | \r |
| 480 | if (type!=0x40 && type!=0x48 && type!=0x88) return 1; // Not an exg opcode\r |
| 481 | \r |
| 482 | use=op&0xf1f8; // Use same opcode for all values\r |
| 483 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r |
| 484 | \r |
| 485 | OpStart(op); Cycles=6;\r |
| 486 | \r |
| 487 | ot(" and r10,r8,#0x0e00 ;@ Find T register\n");\r |
| 488 | ot(" and r11,r8,#0x000f ;@ Find S register\n");\r |
| 489 | if (type==0x48) ot(" orr r10,r10,#0x1000 ;@ T is an address register\n");\r |
| 490 | ot("\n");\r |
| 491 | ot(" ldr r0,[r7,r10,lsr #7] ;@ Get T\n");\r |
| 492 | ot(" ldr r1,[r7,r11,lsl #2] ;@ Get S\n");\r |
| 493 | ot("\n");\r |
| 494 | ot(" str r0,[r7,r11,lsl #2] ;@ T->S\n");\r |
| 495 | ot(" str r1,[r7,r10,lsr #7] ;@ S->T\n"); \r |
| 496 | ot("\n");\r |
| 497 | \r |
| 498 | OpEnd();\r |
| 499 | \r |
| 500 | return 0;\r |
| 501 | }\r |
| 502 | \r |
| 503 | // ------------------------- movep -------------------------------\r |
| 504 | // 0000ddd1 0z001sss\r |
| 505 | // 0000sss1 1z001ddd (to mem)\r |
| 506 | int OpMovep(int op)\r |
| 507 | {\r |
| 508 | int ea=0,rea=0;\r |
| 509 | int size=1,use=0,dir,aadd=0;\r |
| 510 | \r |
| 511 | use=op&0xf1f8;\r |
| 512 | if (op!=use) { OpUse(op,use); return 0; } // Use existing handler (for all dests, srcs)\r |
| 513 | \r |
| 514 | // Get EA\r |
| 515 | ea = (op&0x0007)|0x28;\r |
| 516 | rea= (op&0x0e00)>>9;\r |
| 517 | dir = (op>>7)&1;\r |
| 518 | \r |
| 519 | // Find size extension\r |
| 520 | if(op&0x0040) size=2;\r |
| 521 | \r |
| 522 | OpStart(op,ea);\r |
| 523 | \r |
| 524 | if(dir) { // reg to mem\r |
| 525 | EaCalcReadNoSE(-1,11,rea,size,0x0e00);\r |
| 526 | \r |
| 527 | EaCalc(10,0x000f,ea,size);\r |
| 528 | if(size==2) { // if operand is long\r |
| 529 | ot(" mov r1,r11,lsr #24 ;@ first byte\n");\r |
| 530 | EaWrite(10,1,ea,0,0x000f); // store first byte\r |
| 531 | ot(" add r0,r10,#%i\n",(aadd+=2));\r |
| 532 | ot(" mov r1,r11,lsr #16 ;@ second byte\n");\r |
| 533 | EaWrite(0,1,ea,0,0x000f); // store second byte\r |
| 534 | ot(" add r0,r10,#%i\n",(aadd+=2));\r |
| 535 | } else {\r |
| 536 | ot(" mov r0,r10\n");\r |
| 537 | }\r |
| 538 | ot(" mov r1,r11,lsr #8 ;@ first or third byte\n");\r |
| 539 | EaWrite(0,1,ea,0,0x000f);\r |
| 540 | ot(" add r0,r10,#%i\n",(aadd+=2));\r |
| 541 | ot(" and r1,r11,#0xff\n");\r |
| 542 | EaWrite(0,1,ea,0,0x000f);\r |
| 543 | } else { // mem to reg\r |
| 544 | EaCalc(10,0x000f,ea,size,1);\r |
| 545 | EaRead(10,11,ea,0,0x000f,1); // read first byte\r |
| 546 | ot(" add r0,r10,#2\n");\r |
| 547 | EaRead(0,1,ea,0,0x000f,1); // read second byte\r |
| 548 | if(size==2) { // if operand is long\r |
| 549 | ot(" orr r11,r11,r1,lsr #8 ;@ second byte\n");\r |
| 550 | ot(" add r0,r10,#4\n");\r |
| 551 | EaRead(0,1,ea,0,0x000f,1);\r |
| 552 | ot(" orr r11,r11,r1,lsr #16 ;@ third byte\n");\r |
| 553 | ot(" add r0,r10,#6\n");\r |
| 554 | EaRead(0,1,ea,0,0x000f,1);\r |
| 555 | ot(" orr r1,r11,r1,lsr #24 ;@ fourth byte\n");\r |
| 556 | } else {\r |
| 557 | ot(" orr r1,r11,r1,lsr #8 ;@ second byte\n");\r |
| 558 | }\r |
| 559 | // store the result\r |
| 560 | EaCalc(11,0x0e00,rea,size,1); // reg number -> r11\r |
| 561 | EaWrite(11,1,rea,size,0x0e00,1);\r |
| 562 | }\r |
| 563 | \r |
| 564 | Cycles=(size==2)?24:16;\r |
| 565 | OpEnd(ea);\r |
| 566 | \r |
| 567 | return 0;\r |
| 568 | }\r |
| 569 | \r |
| 570 | // Emit a Stop/Reset opcodes, 01001110 011100t0 imm\r |
| 571 | int OpStopReset(int op)\r |
| 572 | {\r |
| 573 | int type=(op>>1)&1; // stop/reset\r |
| 574 | \r |
| 575 | OpStart(op);\r |
| 576 | \r |
| 577 | SuperCheck(op);\r |
| 578 | \r |
| 579 | if(type) {\r |
| 580 | // copy immediate to SR, stop the CPU and eat all remaining cycles.\r |
| 581 | ot(" ldrh r0,[r4],#2 ;@ Fetch the immediate\n");\r |
| 582 | OpRegToFlags(1);\r |
| 583 | SuperChange(op,0);\r |
| 584 | \r |
| 585 | ot("\n");\r |
| 586 | \r |
| 587 | ot(" mov r0,#1\n");\r |
| 588 | ot(" str r0,[r7,#0x58] ;@ stopped\n");\r |
| 589 | ot("\n");\r |
| 590 | \r |
| 591 | ot(" mov r5,#0 ;@ eat cycles\n");\r |
| 592 | Cycles = 4;\r |
| 593 | ot("\n");\r |
| 594 | }\r |
| 595 | else\r |
| 596 | {\r |
| 597 | Cycles = 132;\r |
| 598 | #if USE_RESET_CALLBACK\r |
| 599 | ot(" str r4,[r7,#0x40] ;@ Save PC\n");\r |
| 600 | ot(" mov r1,r9,lsr #28\n");\r |
| 601 | ot(" strb r1,[r7,#0x46] ;@ Save Flags (NZCV)\n");\r |
| 602 | ot(" str r5,[r7,#0x5c] ;@ Save Cycles\n");\r |
| 603 | ot(" ldr r11,[r7,#0x90] ;@ ResetCallback\n");\r |
| 604 | ot(" tst r11,r11\n");\r |
| 605 | ot(" movne lr,pc\n");\r |
| 606 | ot(" bxne r11 ;@ call ResetCallback if it is defined\n");\r |
| 607 | ot(" ldrb r9,[r7,#0x46] ;@ r9 = Load Flags (NZCV)\n");\r |
| 608 | ot(" ldr r5,[r7,#0x5c] ;@ Load Cycles\n");\r |
| 609 | ot(" ldr r4,[r7,#0x40] ;@ Load PC\n");\r |
| 610 | ot(" mov r9,r9,lsl #28\n");\r |
| 611 | ot("\n");\r |
| 612 | #endif\r |
| 613 | }\r |
| 614 | \r |
| 615 | OpEnd();\r |
| 616 | \r |
| 617 | return 0;\r |
| 618 | }\r |
| 619 | \r |