Sonic CD shows Sega logo
[picodrive.git] / platform / s60 / install.txt
... / ...
CommitLineData
1Welcome to the S60 version\r
2of Picodrive!\r
3\r
4Credits\r
5-------\r
6This work is mainly based on\r
7Picodrive by Dave,\r
8(www.finalburn.com)\r
9with added sound support and other improvements by Notaz \r
10(http://notaz.atspace.com).\r
11\r
12ARM asm Z80 core is provided by DrZ80 by Reezy\r
13(http://reesy.gp32x.de/)\r
14and YM2612 and SN76489 support are provided by the M.A.M.E project\r
15(http://www.mame.net/).\r
16\r
17See credits within Picodrive for more information.\r
18\r
19Instructions\r
20------------\r
21Picodrive S60 is a Megadrive/ Genesis emulator which enables you to play old games on your S60 phone.\r
22\r
23When its started you are presented with a main menu.\r
24\r
25Use arrows to navigate up and down in the menu and use left softkey or the middle button to select an option\r
26\r
27* Load ROM\r
28Displays a simple built in filebrowser. Displays the last folder you browsed,and default this is top level, with a drive listine (E: is your memory card)\r
29\r
30Use the left soft key (right softkey will cancel) and then navigate until you are in the folder with your rom files.\r
31Use the left softkey to select a file, and emulation will comence as soon as the rom has been loaded.\r
32\r
33Supported data types are either SMD,BIN or a ZIP with a single SMD or BIN file inside.\r
34\r
35* Load state\r
36Only working when a rom has been loaded, used to load a saved game state for the currently loaded rom. Emulation will resume automatically when the state has been loaded.\r
37\r
38* Save state\r
39Only working when a rom has been loaded. Saves the current state of a rom.\r
40\r
41* Configure controls\r
42Lets you configure the controls to use for game play.\r
43Only one control at port 1 is supported. It might be either a 3 button or 6 button joypad.\r
44Select using the confirm/left softkey and return to the main menu using the 'C' key.\r
45Default is \r
463 button pad.\r
47Up - Joystick up\r
48Down - Joystick down\r
49Left - Joystick left\r
50Right - Joystick right\r
51 A - Left soft key\r
52 B - Middle/confirm key\r
53 C - Right soft key\r
54 X - Not configured\r
55 Y - Not configured\r
56 Z - Not configured\r
57Start - '0' key\r
58Up&Left - Not configured\r
59Up&Right - Not configured\r
60Down&Right - Not configured\r
61Down&Left - Not configured\r
62\r
63'C' key is used to get back to the main menu when running the emulation and should not be used for anything else.\r
64\r
653 button pad/6 button pad - Selects to toggle between the two pad types\r
66\r
67Configure keys - Select this to redefine the key bindings\r
68Press the key you want to assign to the requested action. \r
69You can assign the same key to the same action, and is good if you dont need the 8 way controls.\r
70\r
71* Configure screen\r
72Lets you configure the screen mode and frameskip.\r
73Use left softkey or confirm key to select mode. After adjust interpolate or frameskip, select a screen mode to exit the menu\r
74\r
75Portrait is a scaled mode, to 176x168 (default)\r
76Landscape modes are a portrait mode which scales down to 208x168\r
77Portrait stretched is a scaled modenot in aspect, and scales to 176x208\r
78\r
79Interpolate on means that a scanline is interpolated to a smoother look, but this also requires more cpu.\r
80(default on)\r
81\r
82Frameskip lets you decide if you want to set your own constant frameskip or let the action decide\r
83(default is auto)\r
84\r
85\r
86* Configure sound\r
87Lets you configure sound settings. \r
88Use confirm or left soft key to change a value and use the 'c' key to exit to the main menu\r
89\r
90Z80 - Used in many games to drive the sound Will cost a penalty in shown FPS, but can increase compability if enabled even if sound is turned off.\r
91(default is on)\r
92YM2612 - FM OPL sound Enable for FM sound\r
93(default is on)\r
94SN76496 - TI Sound chip - Enable for sound\r
95(default is on)\r
96Volume - Select to change volume \r
97(Default is 60%)\r
98Sample rate - Select to toggle between 8Khz,11Khz,16Khz and 22Khz. If you select a rate which is not compatible with your phone it will be reset back to 8Khz.\r
99(default is 8KHZ)\r
100\r
101* Reset\r
102Will reset the current rom if loaded, and resume execution from the start\r
103\r
104* Credits\r
105Displays a full credits list for the Picodrive project\r
106\r
107* Exit\r
108Exit Picodrive\r
109\r
110Last line will display the name of the rom currently loaded\r
111\r
112Please enjoy and have fun.