1 // This is part of Pico Library
\r
3 // (c) Copyright 2004 Dave, All rights reserved.
\r
4 // (c) Copyright 2006 notaz, All rights reserved.
\r
5 // Free for non-commercial use.
\r
7 // For commercial use, separate licencing terms must be obtained.
\r
10 #include "PicoInt.h"
\r
11 #include "sound/sound.h"
\r
12 #include "sound/ym2612.h"
\r
16 int PicoOpt=0; // disable everything by default
\r
17 int PicoSkipFrame=0; // skip rendering frame?
\r
18 int PicoRegionOverride = 0; // override the region detection 0: Auto, 1: Japan NTSC, 2: Japan PAL, 4: US, 8: Europe
\r
20 void (*PicoWriteSound)(void) = 0; // called once per frame at the best time to send sound buffer (PsndOut) to hardware
\r
22 struct PicoSRAM SRam;
\r
23 int z80startCycle = 0, z80stopCycle = 0; // in 68k cycles
\r
24 //int z80ExtraCycles = 0;
\r
25 int PicoPad[2]; // Joypads, format is SACB RLDU
\r
26 int PicoMCD = 0; // mega CD status: scd_started, reset_pending
\r
28 // to be called once on emu init
\r
31 // Blank space for state:
\r
32 memset(&Pico,0,sizeof(Pico));
\r
33 memset(&PicoPad,0,sizeof(PicoPad));
\r
37 z80_init(); // init even if we aren't going to use it
\r
48 // to be called once on emu exit
\r
55 if(SRam.data) free(SRam.data); SRam.data=0;
\r
58 int PicoReset(int hard)
\r
60 unsigned int region=0;
\r
61 int support=0,hw=0,i=0;
\r
62 unsigned char pal=0;
\r
64 if (Pico.romsize<=0) return 1;
\r
66 // setup correct memory map
\r
69 else PicoMemSetup();
\r
75 // reset VDP state, VRAM and PicoMisc
\r
76 //memset(&Pico.video,0,sizeof(Pico.video));
\r
77 //memset(&Pico.vram,0,sizeof(Pico.vram));
\r
78 memset(&Pico.m,0,sizeof(Pico.m));
\r
79 Pico.video.pending_ints=0;
\r
83 // clear all memory of the emulated machine
\r
84 memset(&Pico.ram,0,(unsigned int)&Pico.rom-(unsigned int)&Pico.ram);
\r
87 // default VDP register values (based on Fusion)
\r
88 Pico.video.reg[0] = Pico.video.reg[1] = 0x04;
\r
89 Pico.video.reg[0xc] = 0x81;
\r
90 Pico.video.reg[0xf] = 0x02;
\r
91 Pico.m.dirtyPal = 1;
\r
93 if(PicoRegionOverride)
\r
95 support = PicoRegionOverride;
\r
99 // Read cartridge region data:
\r
100 region=PicoRead32(0x1f0);
\r
106 c=region>>(i<<3); c&=0xff;
\r
107 if (c<=' ') continue;
\r
109 if (c=='J') support|=1;
\r
110 else if (c=='U') support|=4;
\r
111 else if (c=='E') support|=8;
\r
117 support|=strtol(s,NULL,16);
\r
122 // Try to pick the best hardware value for English/50hz:
\r
123 if (support&8) { hw=0xc0; pal=1; } // Europe
\r
124 else if (support&4) hw=0x80; // USA
\r
125 else if (support&2) { hw=0x40; pal=1; } // Japan PAL
\r
126 else if (support&1) hw=0x00; // Japan NTSC
\r
127 else hw=0x80; // USA
\r
129 Pico.m.hardware=(unsigned char)(hw|0x20); // No disk attached
\r
131 Pico.video.status = 0x3408 | pal; // always set bits | vblank | pal
\r
133 sound_reset(); // pal must be known here
\r
136 PicoResetMCD(hard);
\r
145 if(SRam.data) free(SRam.data); SRam.data=0;
\r
146 Pico.m.sram_reg = 0;
\r
148 if(*(Pico.rom+0x1B1) == 'R' && *(Pico.rom+0x1B0) == 'A') {
\r
149 if(*(Pico.rom+0x1B2) & 0x40) {
\r
151 // what kind of EEPROMs are actually used? X24C02? X24C04? (X24C01 has only 128), but we will support up to 8K
\r
152 SRam.start = PicoRead32(0x1B4) & ~1; // zero address is used for clock by some games
\r
153 SRam.end = PicoRead32(0x1B8);
\r
154 sram_size = 0x2000;
\r
155 Pico.m.sram_reg = 4;
\r
158 SRam.start = PicoRead32(0x1B4) & 0xFFFF00;
\r
159 SRam.end = PicoRead32(0x1B8) | 1;
\r
160 sram_size = SRam.end - SRam.start + 1;
\r
162 Pico.m.sram_reg |= 0x10; // SRAM was detected
\r
164 if(sram_size <= 0) {
\r
165 // some games may have bad headers, like S&K and Sonic3
\r
166 SRam.start = 0x200000;
\r
167 SRam.end = 0x203FFF;
\r
168 sram_size = 0x004000;
\r
171 // enable sram access by default if it doesn't overlap with ROM
\r
172 if(Pico.romsize <= SRam.start) Pico.m.sram_reg |= 1;
\r
173 SRam.reg_back = Pico.m.sram_reg;
\r
176 SRam.data = (unsigned char *) calloc(sram_size, 1);
\r
177 if(!SRam.data) return 1;
\r
180 // Dino Dini's Soccer malfunctions if SRAM is not filled with 0xff
\r
181 if (strncmp((char *)Pico.rom+0x150, "IDOND NI'I", 10) == 0)
\r
182 memset(SRam.data, 0xff, sram_size);
\r
185 Pico.m.sram_reg = SRam.reg_back; // restore sram_reg
\r
191 static int dma_timings[] = {
\r
192 83, 167, 166, 83, // vblank: 32cell: dma2vram dma2[vs|c]ram vram_fill vram_copy
\r
193 102, 205, 204, 102, // vblank: 40cell:
\r
194 8, 16, 15, 8, // active: 32cell:
\r
195 9, 18, 17, 9 // ...
\r
198 static int dma_bsycles[] = {
\r
199 (488<<8)/83, (488<<8)/167, (488<<8)/166, (488<<8)/83,
\r
200 (488<<8)/102, (488<<8)/205, (488<<8)/204, (488<<8)/102,
\r
201 (488<<8)/8, (488<<8)/16, (488<<8)/15, (488<<8)/8,
\r
202 (488<<8)/9, (488<<8)/18, (488<<8)/17, (488<<8)/9
\r
208 int burn = 0, bytes_can = 0, dma_op = Pico.video.reg[0x17]>>6; // see gens for 00 and 01 modes
\r
209 int bytes = Pico.m.dma_bytes;
\r
212 if(!(dma_op&2)) dma_op = (Pico.video.type==1) ? 0 : 1; // setting dma_timings offset here according to Gens
\r
214 if(Pico.video.reg[12] & 1) dma_op |= 4; // 40 cell mode?
\r
215 if(!(Pico.video.status&8)&&(Pico.video.reg[1]&0x40)) dma_op|=8; // active display?
\r
216 bytes_can = dma_timings[dma_op];
\r
218 if(bytes <= bytes_can) {
\r
219 if(dma_op&2) Pico.video.status&=~2; // dma no longer busy
\r
221 burn = bytes * dma_bsycles[dma_op] >> 8; // have to be approximate because can't afford division..
\r
222 //SekCycleCnt-=Pico.m.dma_endcycles;
\r
223 //Pico.m.dma_endcycles = 0;
\r
225 Pico.m.dma_bytes = 0;
\r
227 if(!(dma_op&2)) burn = 488;
\r
228 Pico.m.dma_bytes -= bytes_can;
\r
231 //SekCycleCnt+=burn;
\r
232 dprintf("~Dma %i op=%i can=%i burn=%i [%i|%i]", Pico.m.dma_bytes, dma_op1, bytes_can, burn, Pico.m.scanline, SekCyclesDone());
\r
233 //dprintf("~aim: %i, cnt: %i", SekCycleAim, SekCycleCnt);
\r
237 static __inline void SekRun(int cyc)
\r
241 //dprintf("aim: %i, cnt: %i", SekCycleAim, SekCycleCnt);
\r
242 if((cyc_do=SekCycleAim-SekCycleCnt) <= 0) return;
\r
243 //dprintf("cyc_do: %i", cyc_do);
\r
244 #if defined(EMU_C68K) && defined(EMU_M68K)
\r
245 // this means we do run-compare Cyclone vs Musashi
\r
246 SekCycleCnt+=CM_compareRun(cyc_do);
\r
247 #elif defined(EMU_C68K)
\r
248 PicoCpu.cycles=cyc_do;
\r
249 CycloneRun(&PicoCpu);
\r
250 SekCycleCnt+=cyc_do-PicoCpu.cycles;
\r
251 #elif defined(EMU_A68K)
\r
252 m68k_ICount=cyc_do;
\r
254 SekCycleCnt+=cyc_do-m68k_ICount;
\r
255 #elif defined(EMU_M68K)
\r
256 SekCycleCnt+=m68k_execute(cyc_do);
\r
260 static __inline void SekStep(void)
\r
262 // this is required for timing sensitive stuff to work
\r
263 int realaim=SekCycleAim; SekCycleAim=SekCycleCnt+1;
\r
264 #if defined(EMU_C68K) && defined(EMU_M68K)
\r
265 // this means we do run-compare Cyclone vs Musashi
\r
266 SekCycleCnt+=CM_compareRun(1);
\r
267 #elif defined(EMU_C68K)
\r
269 CycloneRun(&PicoCpu);
\r
270 SekCycleCnt+=1-PicoCpu.cycles;
\r
271 #elif defined(EMU_A68K)
\r
274 SekCycleCnt+=1-m68k_ICount;
\r
275 #elif defined(EMU_M68K)
\r
276 SekCycleCnt+=m68k_execute(1);
\r
278 SekCycleAim=realaim;
\r
281 static int CheckIdle(void)
\r
284 unsigned char state[0x88];
\r
286 memset(state,0,sizeof(state));
\r
288 // See if the state is the same after 2 steps:
\r
289 SekState(state); SekStep(); SekStep(); SekState(state+0x44);
\r
290 if (memcmp(state,state+0x44,0x44)==0) return 1;
\r
292 unsigned char state[0x44];
\r
293 static unsigned char oldstate[0x44];
\r
296 if(memcmp(state,oldstate,0x40)==0) return 1;
\r
297 memcpy(oldstate, state, 0x40);
\r
303 // to be called on 224 or line_sample scanlines only
\r
304 static __inline void getSamples(int y)
\r
307 //dprintf("sta%i: %i [%i]", (emustatus & 2), emustatus, y);
\r
309 sound_render(PsndLen/2, PsndLen-PsndLen/2);
\r
310 else sound_render(0, PsndLen);
\r
311 if (emustatus&1) emustatus|=2; else emustatus&=~2;
\r
312 if (PicoWriteSound) PicoWriteSound();
\r
313 // clear sound buffer
\r
314 memset(PsndOut, 0, (PicoOpt & 8) ? (PsndLen<<2) : (PsndLen<<1));
\r
316 else if(emustatus & 3) {
\r
319 sound_render(0, PsndLen/2);
\r
323 //extern UINT32 mz80GetRegisterValue(void *, UINT32);
\r
325 // Accurate but slower frame which does hints
\r
326 static int PicoFrameHints(void)
\r
328 struct PicoVideo *pv=&Pico.video;
\r
329 int total_z80=0,lines,y,lines_vis = 224,z80CycleAim = 0,line_sample;
\r
330 const int cycles_68k=488,cycles_z80=228; // both PAL and NTSC compile to same values
\r
331 int skip=PicoSkipFrame || (PicoOpt&0x10);
\r
332 int hint; // Hint counter
\r
334 if(Pico.m.pal) { //
\r
335 //cycles_68k = (int) ((double) OSC_PAL / 7 / 50 / 312 + 0.4); // should compile to a constant (488)
\r
336 //cycles_z80 = (int) ((double) OSC_PAL / 15 / 50 / 312 + 0.4); // 228
\r
337 lines = 312; // Steve Snake says there are 313 lines, but this seems to also work well
\r
339 if(pv->reg[1]&8) lines_vis = 240;
\r
341 //cycles_68k = (int) ((double) OSC_NTSC / 7 / 60 / 262 + 0.4); // 488
\r
342 //cycles_z80 = (int) ((double) OSC_NTSC / 15 / 60 / 262 + 0.4); // 228
\r
348 //z80ExtraCycles = 0;
\r
352 // z80_resetCycles();
\r
354 pv->status&=~0x88; // clear V-Int, come out of vblank
\r
356 hint=pv->reg[10]; // Load H-Int counter
\r
357 //dprintf("-hint: %i", hint);
\r
359 for (y=0;y<lines;y++)
\r
361 Pico.m.scanline=(short)y;
\r
363 // pad delay (for 6 button pads)
\r
365 if(Pico.m.padDelay[0]++ > 25) Pico.m.padTHPhase[0]=0;
\r
366 if(Pico.m.padDelay[1]++ > 25) Pico.m.padTHPhase[1]=0;
\r
370 if(y <= lines_vis && --hint < 0) // y <= lines_vis: Comix Zone, Golden Axe
\r
372 //dprintf("rhint:old @ %06x", SekPc);
\r
373 hint=pv->reg[10]; // Reload H-Int counter
\r
374 pv->pending_ints|=0x10;
\r
375 if (pv->reg[0]&0x10) SekInterrupt(4);
\r
376 //dprintf("rhint: %i @ %06x [%i|%i]", hint, SekPc, y, SekCycleCnt);
\r
377 //dprintf("hint_routine: %x", (*(unsigned short*)(Pico.ram+0x0B84)<<16)|*(unsigned short*)(Pico.ram+0x0B86));
\r
381 if (y == lines_vis)
\r
383 dprintf("vint: @ %06x [%i|%i], aim=%i cnt=%i", SekPc, y, SekCycleCnt, SekCycleAim, SekCycleCnt);
\r
384 pv->status|=0x08; // go into vblank
\r
385 if(!Pico.m.dma_bytes||(Pico.video.reg[0x17]&0x80)) {
\r
386 // there must be a gap between H and V ints, also after vblank bit set (Mazin Saga, Bram Stoker's Dracula)
\r
387 SekRun(128); SekCycleAim-=128; // 128; ?
\r
389 dprintf("[%i|%i], aim=%i cnt=%i @ %x", y, SekCycleCnt, SekCycleAim, SekCycleCnt, SekPc);
\r
390 pv->status|=0x80; // V-Int happened
\r
391 pv->pending_ints|=0x20;
\r
392 if(pv->reg[1]&0x20) SekInterrupt(6);
\r
393 if(Pico.m.z80Run && (PicoOpt&4)) // ?
\r
395 //dprintf("zint: [%i|%i] zPC=%04x", Pico.m.scanline, SekCyclesDone(), mz80GetRegisterValue(NULL, 0));
\r
398 // decide if we draw this line
\r
399 #if CAN_HANDLE_240_LINES
\r
400 if(!skip && ((!(pv->reg[1]&8) && y<224) || ((pv->reg[1]&8) && y<240)) )
\r
407 sound_timers_and_dac(y);
\r
409 // get samples from sound chips
\r
410 if(y == 32 && PsndOut)
\r
412 else if((y == 224 || y == line_sample) && PsndOut)
\r
416 if(Pico.m.dma_bytes) SekCycleCnt+=CheckDMA();
\r
417 SekRun(cycles_68k);
\r
418 if((PicoOpt&4) && Pico.m.z80Run) {
\r
420 z80CycleAim+=cycles_z80;
\r
421 total_z80+=z80_run(z80CycleAim-total_z80);
\r
425 // draw a frame just after vblank in alternative render mode
\r
426 if(!PicoSkipFrame && (PicoOpt&0x10))
\r
432 // helper z80 runner
\r
433 static void PicoRunZ80Simple(int line_from, int line_to)
\r
435 int line_from_r=line_from, line_to_r=line_to, line = line_from;
\r
436 int line_sample = Pico.m.pal ? 68 : 93;
\r
437 extern const unsigned short vcounts[];
\r
439 if(!(PicoOpt&4) || Pico.m.z80Run == 0) { line_from_r = line_to_r; line_to_r = 0; }
\r
441 if(z80startCycle != 0) {
\r
442 line_from_r = vcounts[z80startCycle>>8]+1;
\r
445 if(z80stopCycle != 0) {
\r
446 line_to_r = vcounts[z80stopCycle>>8]+1;
\r
451 // we have ym2612 enabled, so we have to run Z80 in lines, so we could update DAC and timers
\r
452 for(; line < line_to; line++) {
\r
453 sound_timers_and_dac(line);
\r
454 if((line == 224 || line == line_sample) && PsndOut) getSamples(line);
\r
455 if(line == 32 && PsndOut) emustatus &= ~1;
\r
456 if(line >= line_from_r && line < line_to_r)
\r
459 } else if(line_to_r-line_from_r > 0) {
\r
460 z80_run(228*(line_to_r-line_from_r));
\r
461 // samples will be taken by caller
\r
465 // Simple frame without H-Ints
\r
466 static int PicoFrameSimple(void)
\r
468 struct PicoVideo *pv=&Pico.video;
\r
469 int y=0,line=0,lines=0,lines_step=0,sects;
\r
470 int cycles_68k_vblock,cycles_68k_block;
\r
473 // M68k cycles/frame: 152009.78
\r
474 if(pv->reg[1]&8) { // 240 lines
\r
475 cycles_68k_block = (int) ((double) OSC_PAL / 7 / 50 / 312 * 15 + 0.4); // 16 sects, 16*15=240, 7308
\r
476 cycles_68k_vblock = (int) ((double) OSC_PAL / 7 / 50 / 312 * 24 + 0.4); // 3 sects, 3*24=72, 35163?
\r
479 cycles_68k_block = (int) ((double) OSC_PAL / 7 / 50 / 312 * 14 + 0.4); // 16*14=224
\r
480 cycles_68k_vblock = (int) ((double) OSC_PAL / 7 / 50 / 312 * 22 + 0.4); // 4 sects, 4*22=88
\r
484 // M68k cycles/frame: 127840.71
\r
485 cycles_68k_block = (int) ((double) OSC_NTSC / 7 / 60 / 262 * 14 + 0.4); // 16*14=224, 6831
\r
486 cycles_68k_vblock = (int) ((double) OSC_NTSC / 7 / 60 / 262 * 19 + 0.4); // 2 sects, 2*19=38, 18544
\r
490 Pico.m.scanline=-1;
\r
497 // 6 button pad: let's just say it timed out now
\r
498 Pico.m.padTHPhase[0]=Pico.m.padTHPhase[1]=0;
\r
500 // ---- Active Scan ----
\r
501 pv->status&=~88; // clear V-Int, come out of vblank
\r
503 // Run in sections:
\r
504 for(sects=16; sects; sects--)
\r
506 if (CheckIdle()) break;
\r
508 lines += lines_step;
\r
509 SekRun(cycles_68k_block);
\r
511 PicoRunZ80Simple(line, lines);
\r
515 // run Z80 for remaining sections
\r
517 int c = sects*cycles_68k_block;
\r
519 lines += sects*lines_step;
\r
520 PicoRunZ80Simple(line, lines);
\r
521 // this is for approriate line counter, etc
\r
526 // here we render sound if ym2612 is disabled
\r
527 if(!(PicoOpt&1) && PsndOut) {
\r
528 sound_render(0, PsndLen);
\r
529 if(PicoWriteSound) PicoWriteSound();
\r
530 // clear sound buffer
\r
531 memset(PsndOut, 0, (PicoOpt & 8) ? (PsndLen<<2) : (PsndLen<<1));
\r
535 if(!PicoSkipFrame) {
\r
536 if(!(PicoOpt&0x10))
\r
538 #if CAN_HANDLE_240_LINES
\r
540 for (y=0;y<240;y++) PicoLine(y);
\r
542 for (y=0;y<224;y++) PicoLine(y);
\r
545 for (y=0;y<224;y++) PicoLine(y);
\r
547 else PicoFrameFull();
\r
550 // ---- V-Blanking period ----
\r
553 if(pv->reg[1]&8) { // 240 lines
\r
554 lines = line = 240;
\r
558 lines = line = 224;
\r
563 lines = line = 224;
\r
568 //dprintf("vint: @ %06x [%i]", SekPc, SekCycleCnt);
\r
569 pv->pending_ints|=0x20;
\r
570 if (pv->reg[1]&0x20) SekInterrupt(6); // Set IRQ
\r
571 pv->status|=0x88; // V-Int happened / go into vblank
\r
572 if(Pico.m.z80Run && (PicoOpt&4)) // ?
\r
576 lines += lines_step;
\r
578 SekRun(cycles_68k_vblock);
\r
580 PicoRunZ80Simple(line, lines);
\r
584 if(sects && CheckIdle()) break;
\r
587 // run Z80 for remaining sections
\r
589 lines += sects*lines_step;
\r
590 PicoRunZ80Simple(line, lines);
\r
596 int PicoFrame(void)
\r
600 Pico.m.frame_count++;
\r
607 // be accurate if we are asked for this
\r
608 if(PicoOpt&0x40) acc=1;
\r
609 // don't be accurate in alternative render mode, as hint effects will not be rendered anyway
\r
610 else if(PicoOpt&0x10) acc = 0;
\r
611 else acc=Pico.video.reg[0]&0x10; // be accurate if hints are used
\r
613 //if(Pico.video.reg[12]&0x2) Pico.video.status ^= 0x10; // change odd bit in interlace mode
\r
615 if(!(PicoOpt&0x10))
\r
620 else PicoFrameSimple();
\r
625 static int DefaultCram(int cram)
\r
628 // Convert 0000bbbb ggggrrrr
\r
629 // to rrrr1ggg g10bbbb1
\r
630 high|=(cram&0x00f)<<12; // Red
\r
631 high|=(cram&0x0f0)<< 3; // Green
\r
632 high|=(cram&0xf00)>> 7; // Blue
\r
636 // Function to convert Megadrive Cram into a native colour:
\r
637 int (*PicoCram)(int cram)=DefaultCram;
\r
639 #if defined(__DEBUG_PRINT) || defined(WIN32)
\r
640 // tmp debug: dump some stuff
\r
641 #define bit(r, x) ((r>>x)&1)
\r
642 void z80_debug(char *dstr);
\r
643 char *debugString()
\r
646 static char dstr[1024];
\r
647 unsigned char *reg=Pico.video.reg, r;
\r
650 sprintf(dstr, "mode set 1: %02x\n", (r=reg[0]));
\r
651 sprintf(dstr, "%sdisplay_disable: %i, M3: %i, palette: %i, ?, hints: %i\n\n", dstr, bit(r,0), bit(r,1), bit(r,2), bit(r,4));
\r
652 sprintf(dstr, "%smode set 2: %02x\n", dstr, (r=reg[1]));
\r
653 sprintf(dstr, "%sSMS/genesis: %i, pal: %i, dma: %i, vints: %i, disp: %i, TMS9918: %i\n\n",dstr, bit(r,2), bit(r,3), bit(r,4), bit(r,5), bit(r,6), bit(r,7));
\r
654 sprintf(dstr, "%smode set 3: %02x\n", dstr, (r=reg[0xB]));
\r
655 sprintf(dstr, "%sLSCR: %i, HSCR: %i, 2cell vscroll: %i, IE2: %i\n\n", dstr, bit(r,0), bit(r,1), bit(r,2), bit(r,3));
\r
656 sprintf(dstr, "%smode set 4: %02x\n", dstr, (r=reg[0xC]));
\r
657 sprintf(dstr, "%sinterlace: %i%i; cells: %i; shadow: %i\n\n", dstr, bit(r,2), bit(r,1), (r&0x80) ? 40 : 32, bit(r,3));
\r
658 sprintf(dstr, "%sscroll size: w: %i; h: %i\n\n", dstr, reg[0x10]&3, (reg[0x10]&0x30)>>4);
\r
659 sprintf(dstr, "%sSRAM: det: %i; eeprom: %i\n", dstr, bit(Pico.m.sram_reg, 4), bit(Pico.m.sram_reg, 2));
\r
660 sprintf(dstr, "%sCPU state: PC: %06x cycles: %i\n", dstr, SekPc, SekCyclesDoneT());
\r
662 for(r=0; r < 8; r++)
\r
663 sprintf(dstr, "%sd%i=%08x, a%i=%08x\n", dstr, r, PicoCpu.d[r], r, PicoCpu.a[r]);
\r
668 struct PicoVideo *pvid=&Pico.video;
\r
671 static char dstr[1024*8];
\r
674 table=pvid->reg[5]&0x7f;
\r
675 if (pvid->reg[12]&1) table&=0x7e; // Lowest bit 0 in 40-cell mode
\r
676 table<<=8; // Get sprite table address/2
\r
678 for (i=u=n=0; u < 80 && n < 20; u++)
\r
680 unsigned int *sprite;
\r
681 int code, code2, sx, sy, height;
\r
683 sprite=(unsigned int *)(Pico.vram+((table+(link<<2))&0x7ffc)); // Find sprite
\r
688 // check if it is on this line
\r
689 sy = (code&0x1ff);//-0x80;
\r
690 height = ((code>>24)&3)+1;
\r
694 sx = (code2>>16)&0x1ff;
\r
696 dprintf("#%02i x: %03i y: %03i %ix%i", u, sx, sy, ((code>>26)&3)+1, height);
\r
698 link=(code>>16)&0x7f;
\r
699 if(!link) break; // End of sprites
\r
705 FILE *f = fopen("zram", "wb");
\r
706 fwrite(Pico.zram, 1, 0x2000, f);
\r