2 This is yet another Megadrive / Genesis / Sega CD / Mega CD emulator, which was written having ARM-based handheld devices in mind (such as PDAs, smartphones and handheld consoles like GP2X of course). The critical parts (renderer, 68K and Z80 cpu interpreters) and some other random code is written in ARM asm, other code is C. The base code originates from Dave's (fdave, finalburn) PicoDrive 0.30 for Pocket PC. The Sega/Mega CD code is roughly based on Stephane Dallongeville's Gens.
\r
5 For help / comments / questions visit GP32X boards at:
\r
6 http://www.gp32x.com/board/
\r
10 Copy PicoDrive.gpe, code940.bin and mmuhack.o to any place in your filesystem (all 3 files must be in the same directory) and run PicoDrive.gpe. Then load a ROM and enjoy! ROMs can be in .smd or .bin format and can be zipped.
\r
12 If you have any problems (game does not boot, sound is glitchy, broken graphics), make sure you enable "Accurate timing", "Emulate Z80" and use "16bit accurate renderer". This way you will get the best compatibility this emulator can provide.
\r
15 [How to run Sega/Mega CD games]
\r
16 To play any game, you need BIOS files. These files must be copied to the same directory as PicoDrive.gpe. Files can be named as follows:
\r
17 US: us_scd1_9210.bin us_scd2_9306.bin SegaCDBIOS9303.bin
\r
18 EU: eu_mcd1_9210.bin eu_mcd2_9303.bin eu_mcd2_9306.bin
\r
19 JP: jp_mcd1_9112.bin jp_mcd1_9111.bin
\r
20 these files can also be zipped.
\r
22 The game must be dumped to ISO format, but BIN can be used too. If you want CD music, you must use ISO+mp3 files. Audio from BIN files won't be read at all due to SD access issues. Also BIN files are usually larger, so it's better to use ISO. ISO+mp3 files can be named similarly as for other emus.
\r
23 Here are some examples:
\r
30 Sonic the Hedgehog CD (US) - Track 01.iso
\r
31 Sonic the Hedgehog CD (US) - Track 02.mp3
\r
32 Sonic the Hedgehog CD (US) - Track 03.mp3
\r
35 ISO files can also be zipped (but not mp3 files, as they are already compressed). Note that this can cause very long loading times, which may take up to several minutes. File naming is similar as with uncompressed ISOs.
\r
44 If the game hangs after Sega logo, you may need to enable "better sync" and/or "Scale/Rot. fx" options, found in "Sega/Mega CD options" submenu, and then reset the game.
\r
45 If FMV game performance is poor, try adjusting "ReadAhead buffer" to something like 2048K.
\r
51 This enables alternative heavily optimized tile-based renderer, which renders pixels not line-by-line (this is what accurate renderers do), but in 8x8 tiles, which is much faster. But because of the way it works it can't render any mid-frame image changes (raster effects), so it is useful only with some games.
\r
53 Other two are accurate line-based renderers. The 8bit is faster but does not run well with some games like Street Racer.
\r
56 "hw" means GP2X hardware scaler, which causes no performance loss, but scaled image looks a bit blocky. "sw" means software scaling, which uses pixel averaging and may look a bit nicer, but blurry. Horizontal scaling is only for games which use so called "32 column mode" (256x224 or 256x240), and scales image width to 320 pixels. Vertical scales height to 240 for games which use height 224 (most of them).
\r
58 3. "Accurate timing"
\r
59 This adds some more emulation precision, but slows the emulation down. Without this option some games do not boot (Red Zone for example), others have sound problems. This options has no effect for Sega/Mega CD emulation.
\r
61 4. "Accurate sprites"
\r
62 This option improves emulation of sprite priorities, it also enables emulation of sprite collision bit. If you see one sprite being drawn incorrectly above the other (often seen in Sonic 3D Blast), you can enable this to fix the problem. This only works with the accurate renderers (see first option).
\r
65 Self-explanatory. Format is XX/YY, where XX is the number of rendered frames and YY is the number of emulated frames per second.
\r
68 How many frames to skip rendering before displaying another. "Auto" is recommended.
\r
71 Does what it says. You must enable at least YM2612 or SN76496 (in advanced options, see below) for this to make sense.
\r
74 Sound rate and stereo mode. If you want 44100Hz sound, it is recommended to enable the second core (next option).
\r
76 9. "Use ARM940 core for sound"
\r
77 This option causes PicoDrive to use ARM940T core (GP2X's second CPU) for sound (i.e. to generate YM2612 samples) to improve performance noticeably.
\r
80 If you enable this, games will think that 6 button gamepad is connected. If you go and reconfigure your keys, you will be able to bind X,Y,Z and mode actions.
\r
83 This option lets you force the game to think it is running on machine from the specified region, or just to set autodetection order. Also affects Sega/Mega CD.
\r
85 12. "Use SRAM/BRAM savestates"
\r
86 This will automatically read/write SRAM (or BRAM for Sega/Mega CD) savestates for games which are using them. SRAM is saved whenever you pause your game or exit the emulator.
\r
88 13. "Confirm savestate"
\r
89 Allows to enable confirmation on savestate saving (to prevent savestate overwrites), on loading (to prevent destroying current game progress), and on both or none.
\r
92 This is a slot number to use for savestates. This can also be configured to be changed with a button (see "key configuration").
\r
94 15. "GP2X CPU clocks"
\r
95 Here you can change clocks of both GP2X's CPUs. Larger values increase performance. There is no separate option for the second CPU because both CPUs use the same clock source. Setting this option to 200 will cause PicoDrive NOT to change GP2X's clocks at all (this is if you use external program to set clock).
\r
97 16. "[Sega/Mega CD options]"
\r
98 Enters Sega/Mega CD options menu (see below).
\r
100 17. "[advanced options]"
\r
101 Enters advanced options menu (see below).
\r
103 18. "Save cfg as default"
\r
104 If you save your config here it will be loaded on next ROM load, but only if there is no game specific config saved (which will be loaded in that case).
\r
106 19. "Save cfg for current game only"
\r
107 Whenever you load current ROM again these settings will be loaded (squidgehack and RAM settings will not take effect until emulator is restarted).
\r
110 Advanced configuration
\r
111 ----------------------
\r
113 Enter [advanced options] in config menu to see these options.
\r
115 1. "Gamma correction"
\r
116 Alters image gamma through GP2X hardware. Larger values make image to look brighter, lower - darker (default is 1.0).
\r
118 2. "A_SN's gamma curve"
\r
119 If this is enabled, different gamma adjustment method will be used (suggested by A_SN from gp32x boards). Basically it makes difference for dark and bright colors.
\r
122 This one adjusts the LCD refresh rate to better match game's refresh rate and starts synchronizing rendering with it. Should make scrolling smoother and eliminate tearing.
\r
125 Enables emulation of Z80 chip, which was mostly used to drive the other sound chips. Some games do complex sync with it, so you must enable it even if you don't use sound to be able to play them.
\r
127 5. "Emulate YM2612 (FM)"
\r
128 This enables emulation of six-channel FM sound synthesizer chip, which was used to produce sound effects and music.
\r
130 6. "Emulate SN76496 (PSG)"
\r
131 This enables emulation of additional sound chip for additional effects.
\r
133 Note: if you change sound settings AFTER loading a ROM, you may need to reset game to get sound. This is because most games initialize sound chips on startup, and this data is lost when sound chips are being enabled/disabled.
\r
135 7. "gzip savestates"
\r
136 This will always apply gzip compression on your savestates, allowing you to save some space and load/save time.
\r
138 8. "Don't save last used ROM"
\r
139 This will disable writing last used ROM to config on exit (what might cause SD card corruption according to DaveC).
\r
141 9. "craigix's RAM timings"
\r
142 This overclocks the GP2X RAM chips, but may cause instability. Recommended if you use the second core for sound. Needs emulator restart to take effect.
\r
144 http://www.gp32x.com/board/index.php?showtopic=32319
\r
147 Well known way to improve the GP2X performance. You must restart the emulator for the change of this option to take effect.
\r
150 Sega/Mega CD options
\r
151 --------------------
\r
153 1,2,3. "USA/EUR/JAP BIOS"
\r
154 These options just show if your BIOS files were correctly detected by the emulator (it shows the filename it is using). If so, you can press Start to test your BIOS.
\r
157 The Sega/Mega CD unit had two blinking LEDs (red and green) on it. This option will display them on top-left corner of the screen.
\r
159 5. "CDDA audio (using mp3s)"
\r
160 This option enables CD audio playback.
\r
163 This enables 8 channel PCM sound source. It is required for some games to run, because they monitor state of this audio chip.
\r
165 7. "ReadAhead buffer"
\r
166 This option is for dealing with slow SD card access in GP2X, which makes FMV games unplayable. It will allow emulator not to access SD card for longer periods of time, but it will take more time to fill the buffer.
\r
169 Here you can enable 64K RAM cart. Format it in BIOS if you do.
\r
172 The Sega/Mega CD had scaling/rotation chip, which allows effects similar to "Mode 7" effects in SNES. Unfortunately emulating it is slow, and very few games used it, so it's better to disable this option, unless game really needs it.
\r
175 This option is similar to "Perfect synchro" in Gens. Some games require it to run, for example most (all?) Wolfteam games, and some other ones. Don't use it for games which don't need it, it will just slow them down.
\r
181 Select "Configure controls" from the main menu. Then select "Player 1" and you will see two columns. The left column lists names of Genesis/MD controller buttons, and the right GP2X ones, which are assigned to them. If you bind 2 different GP2X buttons to the same action, you will get a combo (which means that you will have to press both buttons for that action to happen.
\r
184 [Other important stuff]
\r
185 When you use both GP2X CPUs, keep in mind that you can't overclock as high as when using ARM920 only. For example my GP2X when run singlecore can reach 280MHz, but with both cores it's about 250MHz. When overclocked too much, it may start hanging and producing random noise, or causing ARM940 crashes ("940 crashed" message displayed).
\r
187 PicoDrive is not a mp3 player, so all mp3s MUST be encoded at 44.1kHz stereo. Badly encoded mp3s can cause various kind of problems, like noises, incorrect playback speeds, not repeating music or even prevent game from starting. Use lower bitrate for better performance (96 or 128kbps CBRs recommended). Due to internal implementation mp3s must not be larger that ~15MB (15548416 bytes). Larger mp3s will not be fully loaded.
\r
189 RAM timings option is good for dualcore operation (it is disabled by default because it doesn't work on every GP2X, so enable it in advanced options).
\r
193 To use GG/patch codes, you must type them into your favorite text editor, one per line. Comments may follow code after a whitespace. Only GameGenie and Genecyst patch formats are supported.
\r
196 Genecyst patch (this example is for Sonic):
\r
198 00334A:0005 Start with five lives
\r
199 012D24:0001 Keep invincibility until end of stage
\r
200 009C76:5478 each ring worth 2
\r
201 009C76:5678 each ring worth 3
\r
204 Game Genie patch (for Sonic 2):
\r
206 ACLA-ATD4 Hidden palace instead of death egg in level select
\r
209 Both GG and patch codes can be mixed in one file.
\r
211 When the file is ready, name it just like your ROM file, but with additional .pat extension, making sure that case matches.
\r
216 PATCH FILE: Sonic.zip.pat
\r
219 PATCH FILE: Sonic 2.bin.pat
\r
221 Put the file into your ROMs directory. Then load the .pat file as you would a ROM. Then Cheat Menu Option should appear in main menu.
\r
224 [What is emulated?]
\r
226 main 68k @ 7.6MHz: yes, Cyclone core
\r
227 z80 @ 3.6MHz: yes, DrZ80 core
\r
228 VDP: yes, except some quirks not used by games
\r
229 YM2612 FM: yes, optimized MAME core
\r
230 SN76489 PSG: yes, MAME core
\r
233 another 68k @ 12.5MHz: yes, Cyclone too
\r
234 gfx scaling/rotation chip (custom ASIC): yes
\r
235 PCM sound source: yes
\r
236 CD-ROM controller: yes (mostly)
\r
237 bram (internal backup RAM): yes
\r
241 [Problems / limitations]
\r
242 * 32x and SVP are not emulated.
\r
243 * Various VDP quirks (window bug, scroll size 2, etc.) are not emulated, as very few games use this (if any at all).
\r
244 * Some games don't work or have glitches because of inaccurate timing and sync between the emulated chips.
\r
248 This emulator uses code from these people/projects:
\r
251 Cyclone 68000 core, Pico emulation library
\r
252 Homepage: http://www.finalburn.com/
\r
255 GP2X port, Cyclone 68000 hacks, lots of additional coding (see changelog).
\r
258 DrZ80, the Z80 emulator written in ARM assembly.
\r
259 Homepage: http://reesy.gp32x.de/
\r
261 Tatsuyuki Satoh, Jarek Burczynski, MultiArcadeMachineEmulator development software implementation of Yamaha FM sound generator
\r
263 MultiArcadeMachineEmulator (MAME) development
\r
264 Texas Instruments SN76489 / SN76496 programmable tone /noise generator
\r
265 Homepage: http://www.mame.net/
\r
267 Stephane Dallongeville
\r
268 Gens, MD/Mega CD/32X emulator. Most Sega CD code is based on this emu.
\r
274 [Additional thanks]
\r
275 * Charles MacDonald (http://cgfm2.emuviews.com/) for old but still very useful info about genesis hardware.
\r
276 * Steve Snake for all that he has done for Genesis emulation scene.
\r
277 * Bart Trzynadlowski for his SSFII and 68000 docs.
\r
278 * Haze for his research (http://haze.mameworld.info).
\r
279 * Mark and Jean-loup for zlib library.
\r
280 * rlyeh and all the other people behind the minimal library.
\r
281 * Squidge for his famous squidgehack(tm).
\r
282 * Dzz for his ARM940 sample code.
\r
283 * GnoStiC & Puck2099 for USB joystick support.
\r
284 * Hermes PS2R, god_at_hell for the CpuCtrl library.
\r
285 * craigix for supplying the GP2X hardware and making this port possible.
\r
286 * Alex for the icon.
\r
287 * Anyone else I forgot. You know who you are.
\r
291 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\r
293 SEGA/Genesis/MegaDrive/SEGA-CD/Mega-CD/32X are trademarks of Sega Enterprises Ltd.
\r
notaz.gp2x.de / picodrive.git / blob