1 /* Teensyduino Core Library
2 * http://www.pjrc.com/teensy/
3 * Copyright (c) 2013 PJRC.COM, LLC.
5 * Permission is hereby granted, free of charge, to any person obtaining
6 * a copy of this software and associated documentation files (the
7 * "Software"), to deal in the Software without restriction, including
8 * without limitation the rights to use, copy, modify, merge, publish,
9 * distribute, sublicense, and/or sell copies of the Software, and to
10 * permit persons to whom the Software is furnished to do so, subject to
11 * the following conditions:
13 * 1. The above copyright notice and this permission notice shall be
14 * included in all copies or substantial portions of the Software.
16 * 2. If the Software is incorporated into a build system that allows
17 * selection among a list of target devices, then similar target
18 * devices manufactured by PJRC.COM must be included in the list of
19 * target devices and selectable in the same manner.
21 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
22 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
23 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
24 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
25 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
26 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
27 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
34 //#define F_CPU 96000000
35 //#define F_CPU 48000000
36 //#define F_CPU 24000000
37 //#define F_BUS 48000000
38 //#define F_BUS 24000000
39 //#define F_MEM 24000000
41 #if (F_CPU == 96000000)
42 #define F_BUS 48000000
43 #define F_MEM 24000000
44 #elif (F_CPU == 48000000)
45 #define F_BUS 48000000
46 #define F_MEM 24000000
47 #elif (F_CPU == 24000000)
48 #define F_BUS 24000000
49 #define F_MEM 24000000
54 #define NULL ((void *)0)
62 // chapter 11: Port control and interrupts (PORT)
63 #define PORTA_PCR0 *(volatile uint32_t *)0x40049000 // Pin Control Register n
64 #define PORT_PCR_ISF (uint32_t)0x01000000 // Interrupt Status Flag
65 #define PORT_PCR_IRQC(n) (uint32_t)(((n) & 15) << 16) // Interrupt Configuration
66 #define PORT_PCR_IRQC_MASK (uint32_t)0x000F0000
67 #define PORT_PCR_LK (uint32_t)0x00008000 // Lock Register
68 #define PORT_PCR_MUX(n) (uint32_t)(((n) & 7) << 8) // Pin Mux Control
69 #define PORT_PCR_MUX_MASK (uint32_t)0x00000700
70 #define PORT_PCR_DSE (uint32_t)0x00000040 // Drive Strength Enable
71 #define PORT_PCR_ODE (uint32_t)0x00000020 // Open Drain Enable
72 #define PORT_PCR_PFE (uint32_t)0x00000010 // Passive Filter Enable
73 #define PORT_PCR_SRE (uint32_t)0x00000004 // Slew Rate Enable
74 #define PORT_PCR_PE (uint32_t)0x00000002 // Pull Enable
75 #define PORT_PCR_PS (uint32_t)0x00000001 // Pull Select
76 #define PORTA_PCR1 *(volatile uint32_t *)0x40049004 // Pin Control Register n
77 #define PORTA_PCR2 *(volatile uint32_t *)0x40049008 // Pin Control Register n
78 #define PORTA_PCR3 *(volatile uint32_t *)0x4004900C // Pin Control Register n
79 #define PORTA_PCR4 *(volatile uint32_t *)0x40049010 // Pin Control Register n
80 #define PORTA_PCR5 *(volatile uint32_t *)0x40049014 // Pin Control Register n
81 #define PORTA_PCR6 *(volatile uint32_t *)0x40049018 // Pin Control Register n
82 #define PORTA_PCR7 *(volatile uint32_t *)0x4004901C // Pin Control Register n
83 #define PORTA_PCR8 *(volatile uint32_t *)0x40049020 // Pin Control Register n
84 #define PORTA_PCR9 *(volatile uint32_t *)0x40049024 // Pin Control Register n
85 #define PORTA_PCR10 *(volatile uint32_t *)0x40049028 // Pin Control Register n
86 #define PORTA_PCR11 *(volatile uint32_t *)0x4004902C // Pin Control Register n
87 #define PORTA_PCR12 *(volatile uint32_t *)0x40049030 // Pin Control Register n
88 #define PORTA_PCR13 *(volatile uint32_t *)0x40049034 // Pin Control Register n
89 #define PORTA_PCR14 *(volatile uint32_t *)0x40049038 // Pin Control Register n
90 #define PORTA_PCR15 *(volatile uint32_t *)0x4004903C // Pin Control Register n
91 #define PORTA_PCR16 *(volatile uint32_t *)0x40049040 // Pin Control Register n
92 #define PORTA_PCR17 *(volatile uint32_t *)0x40049044 // Pin Control Register n
93 #define PORTA_PCR18 *(volatile uint32_t *)0x40049048 // Pin Control Register n
94 #define PORTA_PCR19 *(volatile uint32_t *)0x4004904C // Pin Control Register n
95 #define PORTA_PCR20 *(volatile uint32_t *)0x40049050 // Pin Control Register n
96 #define PORTA_PCR21 *(volatile uint32_t *)0x40049054 // Pin Control Register n
97 #define PORTA_PCR22 *(volatile uint32_t *)0x40049058 // Pin Control Register n
98 #define PORTA_PCR23 *(volatile uint32_t *)0x4004905C // Pin Control Register n
99 #define PORTA_PCR24 *(volatile uint32_t *)0x40049060 // Pin Control Register n
100 #define PORTA_PCR25 *(volatile uint32_t *)0x40049064 // Pin Control Register n
101 #define PORTA_PCR26 *(volatile uint32_t *)0x40049068 // Pin Control Register n
102 #define PORTA_PCR27 *(volatile uint32_t *)0x4004906C // Pin Control Register n
103 #define PORTA_PCR28 *(volatile uint32_t *)0x40049070 // Pin Control Register n
104 #define PORTA_PCR29 *(volatile uint32_t *)0x40049074 // Pin Control Register n
105 #define PORTA_PCR30 *(volatile uint32_t *)0x40049078 // Pin Control Register n
106 #define PORTA_PCR31 *(volatile uint32_t *)0x4004907C // Pin Control Register n
107 #define PORTA_GPCLR *(volatile uint32_t *)0x40049080 // Global Pin Control Low Register
108 #define PORTA_GPCHR *(volatile uint32_t *)0x40049084 // Global Pin Control High Register
109 #define PORTA_ISFR *(volatile uint32_t *)0x400490A0 // Interrupt Status Flag Register
110 #define PORTB_PCR0 *(volatile uint32_t *)0x4004A000 // Pin Control Register n
111 #define PORTB_PCR1 *(volatile uint32_t *)0x4004A004 // Pin Control Register n
112 #define PORTB_PCR2 *(volatile uint32_t *)0x4004A008 // Pin Control Register n
113 #define PORTB_PCR3 *(volatile uint32_t *)0x4004A00C // Pin Control Register n
114 #define PORTB_PCR4 *(volatile uint32_t *)0x4004A010 // Pin Control Register n
115 #define PORTB_PCR5 *(volatile uint32_t *)0x4004A014 // Pin Control Register n
116 #define PORTB_PCR6 *(volatile uint32_t *)0x4004A018 // Pin Control Register n
117 #define PORTB_PCR7 *(volatile uint32_t *)0x4004A01C // Pin Control Register n
118 #define PORTB_PCR8 *(volatile uint32_t *)0x4004A020 // Pin Control Register n
119 #define PORTB_PCR9 *(volatile uint32_t *)0x4004A024 // Pin Control Register n
120 #define PORTB_PCR10 *(volatile uint32_t *)0x4004A028 // Pin Control Register n
121 #define PORTB_PCR11 *(volatile uint32_t *)0x4004A02C // Pin Control Register n
122 #define PORTB_PCR12 *(volatile uint32_t *)0x4004A030 // Pin Control Register n
123 #define PORTB_PCR13 *(volatile uint32_t *)0x4004A034 // Pin Control Register n
124 #define PORTB_PCR14 *(volatile uint32_t *)0x4004A038 // Pin Control Register n
125 #define PORTB_PCR15 *(volatile uint32_t *)0x4004A03C // Pin Control Register n
126 #define PORTB_PCR16 *(volatile uint32_t *)0x4004A040 // Pin Control Register n
127 #define PORTB_PCR17 *(volatile uint32_t *)0x4004A044 // Pin Control Register n
128 #define PORTB_PCR18 *(volatile uint32_t *)0x4004A048 // Pin Control Register n
129 #define PORTB_PCR19 *(volatile uint32_t *)0x4004A04C // Pin Control Register n
130 #define PORTB_PCR20 *(volatile uint32_t *)0x4004A050 // Pin Control Register n
131 #define PORTB_PCR21 *(volatile uint32_t *)0x4004A054 // Pin Control Register n
132 #define PORTB_PCR22 *(volatile uint32_t *)0x4004A058 // Pin Control Register n
133 #define PORTB_PCR23 *(volatile uint32_t *)0x4004A05C // Pin Control Register n
134 #define PORTB_PCR24 *(volatile uint32_t *)0x4004A060 // Pin Control Register n
135 #define PORTB_PCR25 *(volatile uint32_t *)0x4004A064 // Pin Control Register n
136 #define PORTB_PCR26 *(volatile uint32_t *)0x4004A068 // Pin Control Register n
137 #define PORTB_PCR27 *(volatile uint32_t *)0x4004A06C // Pin Control Register n
138 #define PORTB_PCR28 *(volatile uint32_t *)0x4004A070 // Pin Control Register n
139 #define PORTB_PCR29 *(volatile uint32_t *)0x4004A074 // Pin Control Register n
140 #define PORTB_PCR30 *(volatile uint32_t *)0x4004A078 // Pin Control Register n
141 #define PORTB_PCR31 *(volatile uint32_t *)0x4004A07C // Pin Control Register n
142 #define PORTB_GPCLR *(volatile uint32_t *)0x4004A080 // Global Pin Control Low Register
143 #define PORTB_GPCHR *(volatile uint32_t *)0x4004A084 // Global Pin Control High Register
144 #define PORTB_ISFR *(volatile uint32_t *)0x4004A0A0 // Interrupt Status Flag Register
145 #define PORTC_PCR0 *(volatile uint32_t *)0x4004B000 // Pin Control Register n
146 #define PORTC_PCR1 *(volatile uint32_t *)0x4004B004 // Pin Control Register n
147 #define PORTC_PCR2 *(volatile uint32_t *)0x4004B008 // Pin Control Register n
148 #define PORTC_PCR3 *(volatile uint32_t *)0x4004B00C // Pin Control Register n
149 #define PORTC_PCR4 *(volatile uint32_t *)0x4004B010 // Pin Control Register n
150 #define PORTC_PCR5 *(volatile uint32_t *)0x4004B014 // Pin Control Register n
151 #define PORTC_PCR6 *(volatile uint32_t *)0x4004B018 // Pin Control Register n
152 #define PORTC_PCR7 *(volatile uint32_t *)0x4004B01C // Pin Control Register n
153 #define PORTC_PCR8 *(volatile uint32_t *)0x4004B020 // Pin Control Register n
154 #define PORTC_PCR9 *(volatile uint32_t *)0x4004B024 // Pin Control Register n
155 #define PORTC_PCR10 *(volatile uint32_t *)0x4004B028 // Pin Control Register n
156 #define PORTC_PCR11 *(volatile uint32_t *)0x4004B02C // Pin Control Register n
157 #define PORTC_PCR12 *(volatile uint32_t *)0x4004B030 // Pin Control Register n
158 #define PORTC_PCR13 *(volatile uint32_t *)0x4004B034 // Pin Control Register n
159 #define PORTC_PCR14 *(volatile uint32_t *)0x4004B038 // Pin Control Register n
160 #define PORTC_PCR15 *(volatile uint32_t *)0x4004B03C // Pin Control Register n
161 #define PORTC_PCR16 *(volatile uint32_t *)0x4004B040 // Pin Control Register n
162 #define PORTC_PCR17 *(volatile uint32_t *)0x4004B044 // Pin Control Register n
163 #define PORTC_PCR18 *(volatile uint32_t *)0x4004B048 // Pin Control Register n
164 #define PORTC_PCR19 *(volatile uint32_t *)0x4004B04C // Pin Control Register n
165 #define PORTC_PCR20 *(volatile uint32_t *)0x4004B050 // Pin Control Register n
166 #define PORTC_PCR21 *(volatile uint32_t *)0x4004B054 // Pin Control Register n
167 #define PORTC_PCR22 *(volatile uint32_t *)0x4004B058 // Pin Control Register n
168 #define PORTC_PCR23 *(volatile uint32_t *)0x4004B05C // Pin Control Register n
169 #define PORTC_PCR24 *(volatile uint32_t *)0x4004B060 // Pin Control Register n
170 #define PORTC_PCR25 *(volatile uint32_t *)0x4004B064 // Pin Control Register n
171 #define PORTC_PCR26 *(volatile uint32_t *)0x4004B068 // Pin Control Register n
172 #define PORTC_PCR27 *(volatile uint32_t *)0x4004B06C // Pin Control Register n
173 #define PORTC_PCR28 *(volatile uint32_t *)0x4004B070 // Pin Control Register n
174 #define PORTC_PCR29 *(volatile uint32_t *)0x4004B074 // Pin Control Register n
175 #define PORTC_PCR30 *(volatile uint32_t *)0x4004B078 // Pin Control Register n
176 #define PORTC_PCR31 *(volatile uint32_t *)0x4004B07C // Pin Control Register n
177 #define PORTC_GPCLR *(volatile uint32_t *)0x4004B080 // Global Pin Control Low Register
178 #define PORTC_GPCHR *(volatile uint32_t *)0x4004B084 // Global Pin Control High Register
179 #define PORTC_ISFR *(volatile uint32_t *)0x4004B0A0 // Interrupt Status Flag Register
180 #define PORTD_PCR0 *(volatile uint32_t *)0x4004C000 // Pin Control Register n
181 #define PORTD_PCR1 *(volatile uint32_t *)0x4004C004 // Pin Control Register n
182 #define PORTD_PCR2 *(volatile uint32_t *)0x4004C008 // Pin Control Register n
183 #define PORTD_PCR3 *(volatile uint32_t *)0x4004C00C // Pin Control Register n
184 #define PORTD_PCR4 *(volatile uint32_t *)0x4004C010 // Pin Control Register n
185 #define PORTD_PCR5 *(volatile uint32_t *)0x4004C014 // Pin Control Register n
186 #define PORTD_PCR6 *(volatile uint32_t *)0x4004C018 // Pin Control Register n
187 #define PORTD_PCR7 *(volatile uint32_t *)0x4004C01C // Pin Control Register n
188 #define PORTD_PCR8 *(volatile uint32_t *)0x4004C020 // Pin Control Register n
189 #define PORTD_PCR9 *(volatile uint32_t *)0x4004C024 // Pin Control Register n
190 #define PORTD_PCR10 *(volatile uint32_t *)0x4004C028 // Pin Control Register n
191 #define PORTD_PCR11 *(volatile uint32_t *)0x4004C02C // Pin Control Register n
192 #define PORTD_PCR12 *(volatile uint32_t *)0x4004C030 // Pin Control Register n
193 #define PORTD_PCR13 *(volatile uint32_t *)0x4004C034 // Pin Control Register n
194 #define PORTD_PCR14 *(volatile uint32_t *)0x4004C038 // Pin Control Register n
195 #define PORTD_PCR15 *(volatile uint32_t *)0x4004C03C // Pin Control Register n
196 #define PORTD_PCR16 *(volatile uint32_t *)0x4004C040 // Pin Control Register n
197 #define PORTD_PCR17 *(volatile uint32_t *)0x4004C044 // Pin Control Register n
198 #define PORTD_PCR18 *(volatile uint32_t *)0x4004C048 // Pin Control Register n
199 #define PORTD_PCR19 *(volatile uint32_t *)0x4004C04C // Pin Control Register n
200 #define PORTD_PCR20 *(volatile uint32_t *)0x4004C050 // Pin Control Register n
201 #define PORTD_PCR21 *(volatile uint32_t *)0x4004C054 // Pin Control Register n
202 #define PORTD_PCR22 *(volatile uint32_t *)0x4004C058 // Pin Control Register n
203 #define PORTD_PCR23 *(volatile uint32_t *)0x4004C05C // Pin Control Register n
204 #define PORTD_PCR24 *(volatile uint32_t *)0x4004C060 // Pin Control Register n
205 #define PORTD_PCR25 *(volatile uint32_t *)0x4004C064 // Pin Control Register n
206 #define PORTD_PCR26 *(volatile uint32_t *)0x4004C068 // Pin Control Register n
207 #define PORTD_PCR27 *(volatile uint32_t *)0x4004C06C // Pin Control Register n
208 #define PORTD_PCR28 *(volatile uint32_t *)0x4004C070 // Pin Control Register n
209 #define PORTD_PCR29 *(volatile uint32_t *)0x4004C074 // Pin Control Register n
210 #define PORTD_PCR30 *(volatile uint32_t *)0x4004C078 // Pin Control Register n
211 #define PORTD_PCR31 *(volatile uint32_t *)0x4004C07C // Pin Control Register n
212 #define PORTD_GPCLR *(volatile uint32_t *)0x4004C080 // Global Pin Control Low Register
213 #define PORTD_GPCHR *(volatile uint32_t *)0x4004C084 // Global Pin Control High Register
214 #define PORTD_ISFR *(volatile uint32_t *)0x4004C0A0 // Interrupt Status Flag Register
215 #define PORTE_PCR0 *(volatile uint32_t *)0x4004D000 // Pin Control Register n
216 #define PORTE_PCR1 *(volatile uint32_t *)0x4004D004 // Pin Control Register n
217 #define PORTE_PCR2 *(volatile uint32_t *)0x4004D008 // Pin Control Register n
218 #define PORTE_PCR3 *(volatile uint32_t *)0x4004D00C // Pin Control Register n
219 #define PORTE_PCR4 *(volatile uint32_t *)0x4004D010 // Pin Control Register n
220 #define PORTE_PCR5 *(volatile uint32_t *)0x4004D014 // Pin Control Register n
221 #define PORTE_PCR6 *(volatile uint32_t *)0x4004D018 // Pin Control Register n
222 #define PORTE_PCR7 *(volatile uint32_t *)0x4004D01C // Pin Control Register n
223 #define PORTE_PCR8 *(volatile uint32_t *)0x4004D020 // Pin Control Register n
224 #define PORTE_PCR9 *(volatile uint32_t *)0x4004D024 // Pin Control Register n
225 #define PORTE_PCR10 *(volatile uint32_t *)0x4004D028 // Pin Control Register n
226 #define PORTE_PCR11 *(volatile uint32_t *)0x4004D02C // Pin Control Register n
227 #define PORTE_PCR12 *(volatile uint32_t *)0x4004D030 // Pin Control Register n
228 #define PORTE_PCR13 *(volatile uint32_t *)0x4004D034 // Pin Control Register n
229 #define PORTE_PCR14 *(volatile uint32_t *)0x4004D038 // Pin Control Register n
230 #define PORTE_PCR15 *(volatile uint32_t *)0x4004D03C // Pin Control Register n
231 #define PORTE_PCR16 *(volatile uint32_t *)0x4004D040 // Pin Control Register n
232 #define PORTE_PCR17 *(volatile uint32_t *)0x4004D044 // Pin Control Register n
233 #define PORTE_PCR18 *(volatile uint32_t *)0x4004D048 // Pin Control Register n
234 #define PORTE_PCR19 *(volatile uint32_t *)0x4004D04C // Pin Control Register n
235 #define PORTE_PCR20 *(volatile uint32_t *)0x4004D050 // Pin Control Register n
236 #define PORTE_PCR21 *(volatile uint32_t *)0x4004D054 // Pin Control Register n
237 #define PORTE_PCR22 *(volatile uint32_t *)0x4004D058 // Pin Control Register n
238 #define PORTE_PCR23 *(volatile uint32_t *)0x4004D05C // Pin Control Register n
239 #define PORTE_PCR24 *(volatile uint32_t *)0x4004D060 // Pin Control Register n
240 #define PORTE_PCR25 *(volatile uint32_t *)0x4004D064 // Pin Control Register n
241 #define PORTE_PCR26 *(volatile uint32_t *)0x4004D068 // Pin Control Register n
242 #define PORTE_PCR27 *(volatile uint32_t *)0x4004D06C // Pin Control Register n
243 #define PORTE_PCR28 *(volatile uint32_t *)0x4004D070 // Pin Control Register n
244 #define PORTE_PCR29 *(volatile uint32_t *)0x4004D074 // Pin Control Register n
245 #define PORTE_PCR30 *(volatile uint32_t *)0x4004D078 // Pin Control Register n
246 #define PORTE_PCR31 *(volatile uint32_t *)0x4004D07C // Pin Control Register n
247 #define PORTE_GPCLR *(volatile uint32_t *)0x4004D080 // Global Pin Control Low Register
248 #define PORTE_GPCHR *(volatile uint32_t *)0x4004D084 // Global Pin Control High Register
249 #define PORTE_ISFR *(volatile uint32_t *)0x4004D0A0 // Interrupt Status Flag Register
251 // Chapter 12: System Integration Module (SIM)
252 #define SIM_SOPT1 *(volatile uint32_t *)0x40047000 // System Options Register 1
253 #define SIM_SOPT1CFG *(volatile uint32_t *)0x40047004 // SOPT1 Configuration Register
254 #define SIM_SOPT2 *(volatile uint32_t *)0x40048004 // System Options Register 2
255 #define SIM_SOPT2_USBSRC (uint32_t)0x00040000 // 0=USB_CLKIN, 1=FFL/PLL
256 #define SIM_SOPT2_PLLFLLSEL (uint32_t)0x00010000 // 0=FLL, 1=PLL
257 #define SIM_SOPT2_TRACECLKSEL (uint32_t)0x00001000 // 0=MCGOUTCLK, 1=CPU
258 #define SIM_SOPT2_PTD7PAD (uint32_t)0x00000800 // 0=normal, 1=double drive PTD7
259 #define SIM_SOPT2_CLKOUTSEL(n) (uint32_t)(((n) & 7) << 5) // Selects the clock to output on the CLKOUT pin.
260 #define SIM_SOPT2_RTCCLKOUTSEL (uint32_t)0x00000010 // RTC clock out select
261 #define SIM_SOPT4 *(volatile uint32_t *)0x4004800C // System Options Register 4
262 #define SIM_SOPT5 *(volatile uint32_t *)0x40048010 // System Options Register 5
263 #define SIM_SOPT7 *(volatile uint32_t *)0x40048018 // System Options Register 7
264 #define SIM_SDID *(const uint32_t *)0x40048024 // System Device Identification Register
265 #define SIM_SCGC2 *(volatile uint32_t *)0x4004802C // System Clock Gating Control Register 2
266 #define SIM_SCGC2_DAC0 (uint32_t)0x00001000 // DAC0 Clock Gate Control
267 #define SIM_SCGC3 *(volatile uint32_t *)0x40048030 // System Clock Gating Control Register 3
268 #define SIM_SCGC3_ADC1 (uint32_t)0x08000000 // ADC1 Clock Gate Control
269 #define SIM_SCGC3_FTM2 (uint32_t)0x01000000 // FTM2 Clock Gate Control
270 #define SIM_SCGC4 *(volatile uint32_t *)0x40048034 // System Clock Gating Control Register 4
271 #define SIM_SCGC4_VREF (uint32_t)0x00100000 // VREF Clock Gate Control
272 #define SIM_SCGC4_CMP (uint32_t)0x00080000 // Comparator Clock Gate Control
273 #define SIM_SCGC4_USBOTG (uint32_t)0x00040000 // USB Clock Gate Control
274 #define SIM_SCGC4_UART2 (uint32_t)0x00001000 // UART2 Clock Gate Control
275 #define SIM_SCGC4_UART1 (uint32_t)0x00000800 // UART1 Clock Gate Control
276 #define SIM_SCGC4_UART0 (uint32_t)0x00000400 // UART0 Clock Gate Control
277 #define SIM_SCGC4_I2C1 (uint32_t)0x00000080 // I2C1 Clock Gate Control
278 #define SIM_SCGC4_I2C0 (uint32_t)0x00000040 // I2C0 Clock Gate Control
279 #define SIM_SCGC4_CMT (uint32_t)0x00000004 // CMT Clock Gate Control
280 #define SIM_SCGC4_EWM (uint32_t)0x00000002 // EWM Clock Gate Control
281 #define SIM_SCGC5 *(volatile uint32_t *)0x40048038 // System Clock Gating Control Register 5
282 #define SIM_SCGC5_PORTE (uint32_t)0x00002000 // Port E Clock Gate Control
283 #define SIM_SCGC5_PORTD (uint32_t)0x00001000 // Port D Clock Gate Control
284 #define SIM_SCGC5_PORTC (uint32_t)0x00000800 // Port C Clock Gate Control
285 #define SIM_SCGC5_PORTB (uint32_t)0x00000400 // Port B Clock Gate Control
286 #define SIM_SCGC5_PORTA (uint32_t)0x00000200 // Port A Clock Gate Control
287 #define SIM_SCGC5_TSI (uint32_t)0x00000020 // Touch Sense Input TSI Clock Gate Control
288 #define SIM_SCGC5_LPTIMER (uint32_t)0x00000001 // Low Power Timer Access Control
289 #define SIM_SCGC6 *(volatile uint32_t *)0x4004803C // System Clock Gating Control Register 6
290 #define SIM_SCGC6_RTC (uint32_t)0x20000000 // RTC Access
291 #define SIM_SCGC6_ADC0 (uint32_t)0x08000000 // ADC0 Clock Gate Control
292 #define SIM_SCGC6_FTM1 (uint32_t)0x02000000 // FTM1 Clock Gate Control
293 #define SIM_SCGC6_FTM0 (uint32_t)0x01000000 // FTM0 Clock Gate Control
294 #define SIM_SCGC6_PIT (uint32_t)0x00800000 // PIT Clock Gate Control
295 #define SIM_SCGC6_PDB (uint32_t)0x00400000 // PDB Clock Gate Control
296 #define SIM_SCGC6_USBDCD (uint32_t)0x00200000 // USB DCD Clock Gate Control
297 #define SIM_SCGC6_CRC (uint32_t)0x00040000 // CRC Clock Gate Control
298 #define SIM_SCGC6_I2S (uint32_t)0x00008000 // I2S Clock Gate Control
299 #define SIM_SCGC6_SPI1 (uint32_t)0x00002000 // SPI1 Clock Gate Control
300 #define SIM_SCGC6_SPI0 (uint32_t)0x00001000 // SPI0 Clock Gate Control
301 #define SIM_SCGC6_FLEXCAN0 (uint32_t)0x00000010 // FlexCAN0 Clock Gate Control
302 #define SIM_SCGC6_DMAMUX (uint32_t)0x00000002 // DMA Mux Clock Gate Control
303 #define SIM_SCGC6_FTFL (uint32_t)0x00000001 // Flash Memory Clock Gate Control
304 #define SIM_SCGC7 *(volatile uint32_t *)0x40048040 // System Clock Gating Control Register 7
305 #define SIM_SCGC7_DMA (uint32_t)0x00000002 // DMA Clock Gate Control
306 #define SIM_CLKDIV1 *(volatile uint32_t *)0x40048044 // System Clock Divider Register 1
307 #define SIM_CLKDIV1_OUTDIV1(n) (uint32_t)(((n) & 0x0F) << 28) // divide value for the core/system clock
308 #define SIM_CLKDIV1_OUTDIV2(n) (uint32_t)(((n) & 0x0F) << 24) // divide value for the peripheral clock
309 #define SIM_CLKDIV1_OUTDIV4(n) (uint32_t)(((n) & 0x0F) << 16) // divide value for the flash clock
310 #define SIM_CLKDIV2 *(volatile uint32_t *)0x40048048 // System Clock Divider Register 2
311 #define SIM_CLKDIV2_USBDIV(n) (uint32_t)(((n) & 0x07) << 1)
312 #define SIM_CLKDIV2_USBFRAC (uint32_t)0x01
313 #define SIM_FCFG1 *(const uint32_t *)0x4004804C // Flash Configuration Register 1
314 #define SIM_FCFG2 *(const uint32_t *)0x40048050 // Flash Configuration Register 2
315 #define SIM_UIDH *(const uint32_t *)0x40048054 // Unique Identification Register High
316 #define SIM_UIDMH *(const uint32_t *)0x40048058 // Unique Identification Register Mid-High
317 #define SIM_UIDML *(const uint32_t *)0x4004805C // Unique Identification Register Mid Low
318 #define SIM_UIDL *(const uint32_t *)0x40048060 // Unique Identification Register Low
320 // Chapter 13: Reset Control Module (RCM)
321 #define RCM_SRS0 *(volatile uint8_t *)0x4007F000 // System Reset Status Register 0
322 #define RCM_SRS1 *(volatile uint8_t *)0x4007F001 // System Reset Status Register 1
323 #define RCM_RPFC *(volatile uint8_t *)0x4007F004 // Reset Pin Filter Control Register
324 #define RCM_RPFW *(volatile uint8_t *)0x4007F005 // Reset Pin Filter Width Register
325 #define RCM_MR *(volatile uint8_t *)0x4007F007 // Mode Register
327 // Chapter 14: System Mode Controller
328 #define SMC_PMPROT *(volatile uint8_t *)0x4007E000 // Power Mode Protection Register
329 #define SMC_PMPROT_AVLP (uint8_t)0x20 // Allow very low power modes
330 #define SMC_PMPROT_ALLS (uint8_t)0x08 // Allow low leakage stop mode
331 #define SMC_PMPROT_AVLLS (uint8_t)0x02 // Allow very low leakage stop mode
332 #define SMC_PMCTRL *(volatile uint8_t *)0x4007E001 // Power Mode Control Register
333 #define SMC_PMCTRL_LPWUI (uint8_t)0x80 // Low Power Wake Up on Interrupt
334 #define SMC_PMCTRL_RUNM(n) (uint8_t)(((n) & 0x03) << 5) // Run Mode Control
335 #define SMC_PMCTRL_STOPA (uint8_t)0x08 // Stop Aborted
336 #define SMC_PMCTRL_STOPM(n) (uint8_t)((n) & 0x07) // Stop Mode Control
337 #define SMC_VLLSCTRL *(volatile uint8_t *)0x4007E002 // VLLS Control Register
338 #define SMC_VLLSCTRL_PORPO (uint8_t)0x20 // POR Power Option
339 #define SMC_VLLSCTRL_VLLSM(n) (uint8_t)((n) & 0x07) // VLLS Mode Control
340 #define SMC_PMSTAT *(volatile uint8_t *)0x4007E003 // Power Mode Status Register
341 #define SMC_PMSTAT_RUN (uint8_t)0x01 // Current power mode is RUN
342 #define SMC_PMSTAT_STOP (uint8_t)0x02 // Current power mode is STOP
343 #define SMC_PMSTAT_VLPR (uint8_t)0x04 // Current power mode is VLPR
344 #define SMC_PMSTAT_VLPW (uint8_t)0x08 // Current power mode is VLPW
345 #define SMC_PMSTAT_VLPS (uint8_t)0x10 // Current power mode is VLPS
346 #define SMC_PMSTAT_LLS (uint8_t)0x20 // Current power mode is LLS
347 #define SMC_PMSTAT_VLLS (uint8_t)0x40 // Current power mode is VLLS
349 // Chapter 15: Power Management Controller
350 #define PMC_LVDSC1 *(volatile uint8_t *)0x4007D000 // Low Voltage Detect Status And Control 1 register
351 #define PMC_LVDSC1_LVDF (uint8_t)0x80 // Low-Voltage Detect Flag
352 #define PMC_LVDSC1_LVDACK (uint8_t)0x40 // Low-Voltage Detect Acknowledge
353 #define PMC_LVDSC1_LVDIE (uint8_t)0x20 // Low-Voltage Detect Interrupt Enable
354 #define PMC_LVDSC1_LVDRE (uint8_t)0x10 // Low-Voltage Detect Reset Enable
355 #define PMC_LVDSC1_LVDV(n) (uint8_t)((n) & 0x03) // Low-Voltage Detect Voltage Select
356 #define PMC_LVDSC2 *(volatile uint8_t *)0x4007D001 // Low Voltage Detect Status And Control 2 register
357 #define PMC_LVDSC2_LVWF (uint8_t)0x80 // Low-Voltage Warning Flag
358 #define PMC_LVDSC2_LVWACK (uint8_t)0x40 // Low-Voltage Warning Acknowledge
359 #define PMC_LVDSC2_LVWIE (uint8_t)0x20 // Low-Voltage Warning Interrupt Enable
360 #define PMC_LVDSC2_LVWV(n) (uint8_t)((n) & 0x03) // Low-Voltage Warning Voltage Select
361 #define PMC_REGSC *(volatile uint8_t *)0x4007D002 // Regulator Status And Control register
362 #define PMC_REGSC_BGEN (uint8_t)0x10 // Bandgap Enable In VLPx Operation
363 #define PMC_REGSC_ACKISO (uint8_t)0x08 // Acknowledge Isolation
364 #define PMC_REGSC_REGONS (uint8_t)0x04 // Regulator In Run Regulation Status
365 #define PMC_REGSC_BGBE (uint8_t)0x01 // Bandgap Buffer Enable
367 // Chapter 16: Low-Leakage Wakeup Unit (LLWU)
368 #define LLWU_PE1 *(volatile uint8_t *)0x4007C000 // LLWU Pin Enable 1 register
369 #define LLWU_PE2 *(volatile uint8_t *)0x4007C001 // LLWU Pin Enable 2 register
370 #define LLWU_PE3 *(volatile uint8_t *)0x4007C002 // LLWU Pin Enable 3 register
371 #define LLWU_PE4 *(volatile uint8_t *)0x4007C003 // LLWU Pin Enable 4 register
372 #define LLWU_ME *(volatile uint8_t *)0x4007C004 // LLWU Module Enable register
373 #define LLWU_F1 *(volatile uint8_t *)0x4007C005 // LLWU Flag 1 register
374 #define LLWU_F2 *(volatile uint8_t *)0x4007C006 // LLWU Flag 2 register
375 #define LLWU_F3 *(volatile uint8_t *)0x4007C007 // LLWU Flag 3 register
376 #define LLWU_FILT1 *(volatile uint8_t *)0x4007C008 // LLWU Pin Filter 1 register
377 #define LLWU_FILT2 *(volatile uint8_t *)0x4007C009 // LLWU Pin Filter 2 register
378 #define LLWU_RST *(volatile uint8_t *)0x4007C00A // LLWU Reset Enable register
380 // Chapter 17: Miscellaneous Control Module (MCM)
381 #define MCM_PLASC *(volatile uint16_t *)0xE0080008 // Crossbar Switch (AXBS) Slave Configuration
382 #define MCM_PLAMC *(volatile uint16_t *)0xE008000A // Crossbar Switch (AXBS) Master Configuration
383 #define MCM_PLACR *(volatile uint32_t *)0xE008000C // Crossbar Switch (AXBS) Control Register (MK20DX128)
384 #define MCM_PLACR_ARG (uint32_t)0x00000200 // Arbitration select, 0=fixed, 1=round-robin
385 #define MCM_CR *(volatile uint32_t *)0xE008000C // RAM arbitration control register (MK20DX256)
386 #define MCM_CR_SRAMLWP (uint32_t)0x40000000 // SRAM_L write protect
387 #define MCM_CR_SRAMLAP(n) (uint32_t)(((n) & 0x03) << 28) // SRAM_L priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA
388 #define MCM_CR_SRAMUWP (uint32_t)0x04000000 // SRAM_U write protect
389 #define MCM_CR_SRAMUAP(n) (uint32_t)(((n) & 0x03) << 24) // SRAM_U priority, 0=RR, 1=favor DMA, 2=CPU, 3=DMA
391 // Crossbar Switch (AXBS) - only programmable on MK20DX256
392 #define AXBS_PRS0 *(volatile uint32_t *)0x40004000 // Priority Registers Slave 0
393 #define AXBS_CRS0 *(volatile uint32_t *)0x40004010 // Control Register 0
394 #define AXBS_PRS1 *(volatile uint32_t *)0x40004100 // Priority Registers Slave 1
395 #define AXBS_CRS1 *(volatile uint32_t *)0x40004110 // Control Register 1
396 #define AXBS_PRS2 *(volatile uint32_t *)0x40004200 // Priority Registers Slave 2
397 #define AXBS_CRS2 *(volatile uint32_t *)0x40004210 // Control Register 2
398 #define AXBS_PRS3 *(volatile uint32_t *)0x40004300 // Priority Registers Slave 3
399 #define AXBS_CRS3 *(volatile uint32_t *)0x40004310 // Control Register 3
400 #define AXBS_PRS4 *(volatile uint32_t *)0x40004400 // Priority Registers Slave 4
401 #define AXBS_CRS4 *(volatile uint32_t *)0x40004410 // Control Register 4
402 #define AXBS_PRS5 *(volatile uint32_t *)0x40004500 // Priority Registers Slave 5
403 #define AXBS_CRS5 *(volatile uint32_t *)0x40004510 // Control Register 5
404 #define AXBS_PRS6 *(volatile uint32_t *)0x40004600 // Priority Registers Slave 6
405 #define AXBS_CRS6 *(volatile uint32_t *)0x40004610 // Control Register 6
406 #define AXBS_PRS7 *(volatile uint32_t *)0x40004700 // Priority Registers Slave 7
407 #define AXBS_CRS7 *(volatile uint32_t *)0x40004710 // Control Register 7
408 #define AXBS_MGPCR0 *(volatile uint32_t *)0x40004800 // Master 0 General Purpose Control Register
409 #define AXBS_MGPCR1 *(volatile uint32_t *)0x40004900 // Master 1 General Purpose Control Register
410 #define AXBS_MGPCR2 *(volatile uint32_t *)0x40004A00 // Master 2 General Purpose Control Register
411 #define AXBS_MGPCR3 *(volatile uint32_t *)0x40004B00 // Master 3 General Purpose Control Register
412 #define AXBS_MGPCR4 *(volatile uint32_t *)0x40004C00 // Master 4 General Purpose Control Register
413 #define AXBS_MGPCR5 *(volatile uint32_t *)0x40004D00 // Master 5 General Purpose Control Register
414 #define AXBS_MGPCR6 *(volatile uint32_t *)0x40004E00 // Master 6 General Purpose Control Register
415 #define AXBS_MGPCR7 *(volatile uint32_t *)0x40004F00 // Master 7 General Purpose Control Register
416 #define AXBS_CRS_READONLY (uint32_t)0x80000000
417 #define AXBS_CRS_HALTLOWPRIORITY (uint32_t)0x40000000
418 #define AXBS_CRS_ARB_FIXED (uint32_t)0x00000000
419 #define AXBS_CRS_ARB_ROUNDROBIN (uint32_t)0x00010000
420 #define AXBS_CRS_PARK_FIXED (uint32_t)0x00000000
421 #define AXBS_CRS_PARK_PREVIOUS (uint32_t)0x00000010
422 #define AXBS_CRS_PARK_NONE (uint32_t)0x00000020
423 #define AXBS_CRS_PARK(n) (uint32_t)(((n) & 7) << 0)
427 // Chapter 20: Direct Memory Access Multiplexer (DMAMUX)
428 #define DMAMUX0_CHCFG0 *(volatile uint8_t *)0x40021000 // Channel Configuration register
429 #define DMAMUX0_CHCFG1 *(volatile uint8_t *)0x40021001 // Channel Configuration register
430 #define DMAMUX0_CHCFG2 *(volatile uint8_t *)0x40021002 // Channel Configuration register
431 #define DMAMUX0_CHCFG3 *(volatile uint8_t *)0x40021003 // Channel Configuration register
432 #define DMAMUX0_CHCFG4 *(volatile uint8_t *)0x40021004 // Channel Configuration register
433 #define DMAMUX0_CHCFG5 *(volatile uint8_t *)0x40021005 // Channel Configuration register
434 #define DMAMUX0_CHCFG6 *(volatile uint8_t *)0x40021006 // Channel Configuration register
435 #define DMAMUX0_CHCFG7 *(volatile uint8_t *)0x40021007 // Channel Configuration register
436 #define DMAMUX0_CHCFG8 *(volatile uint8_t *)0x40021008 // Channel Configuration register
437 #define DMAMUX0_CHCFG9 *(volatile uint8_t *)0x40021009 // Channel Configuration register
438 #define DMAMUX0_CHCFG10 *(volatile uint8_t *)0x4002100A // Channel Configuration register
439 #define DMAMUX0_CHCFG11 *(volatile uint8_t *)0x4002100B // Channel Configuration register
440 #define DMAMUX0_CHCFG12 *(volatile uint8_t *)0x4002100C // Channel Configuration register
441 #define DMAMUX0_CHCFG13 *(volatile uint8_t *)0x4002100D // Channel Configuration register
442 #define DMAMUX0_CHCFG14 *(volatile uint8_t *)0x4002100E // Channel Configuration register
443 #define DMAMUX0_CHCFG15 *(volatile uint8_t *)0x4002100F // Channel Configuration register
444 #define DMAMUX_DISABLE 0
445 #define DMAMUX_TRIG 64
446 #define DMAMUX_ENABLE 128
447 #define DMAMUX_SOURCE_UART0_RX 2
448 #define DMAMUX_SOURCE_UART0_TX 3
449 #define DMAMUX_SOURCE_UART1_RX 4
450 #define DMAMUX_SOURCE_UART1_TX 5
451 #define DMAMUX_SOURCE_UART2_RX 6
452 #define DMAMUX_SOURCE_UART2_TX 7
453 #define DMAMUX_SOURCE_I2S0_RX 14
454 #define DMAMUX_SOURCE_I2S0_TX 15
455 #define DMAMUX_SOURCE_SPI0_RX 16
456 #define DMAMUX_SOURCE_SPI0_TX 17
457 #define DMAMUX_SOURCE_I2C0 22
458 #define DMAMUX_SOURCE_I2C1 23
459 #define DMAMUX_SOURCE_FTM0_CH0 24
460 #define DMAMUX_SOURCE_FTM0_CH1 25
461 #define DMAMUX_SOURCE_FTM0_CH2 26
462 #define DMAMUX_SOURCE_FTM0_CH3 27
463 #define DMAMUX_SOURCE_FTM0_CH4 28
464 #define DMAMUX_SOURCE_FTM0_CH5 29
465 #define DMAMUX_SOURCE_FTM0_CH6 30
466 #define DMAMUX_SOURCE_FTM0_CH7 31
467 #define DMAMUX_SOURCE_FTM1_CH0 32
468 #define DMAMUX_SOURCE_FTM1_CH1 33
469 #define DMAMUX_SOURCE_FTM2_CH0 34
470 #define DMAMUX_SOURCE_FTM2_CH1 35
471 #define DMAMUX_SOURCE_ADC0 40
472 #define DMAMUX_SOURCE_ADC1 41
473 #define DMAMUX_SOURCE_CMP0 42
474 #define DMAMUX_SOURCE_CMP1 43
475 #define DMAMUX_SOURCE_CMP2 44
476 #define DMAMUX_SOURCE_DAC0 45
477 #define DMAMUX_SOURCE_CMT 47
478 #define DMAMUX_SOURCE_PDB 48
479 #define DMAMUX_SOURCE_PORTA 49
480 #define DMAMUX_SOURCE_PORTB 50
481 #define DMAMUX_SOURCE_PORTC 51
482 #define DMAMUX_SOURCE_PORTD 52
483 #define DMAMUX_SOURCE_PORTE 53
484 #define DMAMUX_SOURCE_ALWAYS0 54
485 #define DMAMUX_SOURCE_ALWAYS1 55
486 #define DMAMUX_SOURCE_ALWAYS2 56
487 #define DMAMUX_SOURCE_ALWAYS3 57
488 #define DMAMUX_SOURCE_ALWAYS4 58
489 #define DMAMUX_SOURCE_ALWAYS5 59
490 #define DMAMUX_SOURCE_ALWAYS6 60
491 #define DMAMUX_SOURCE_ALWAYS7 61
492 #define DMAMUX_SOURCE_ALWAYS8 62
493 #define DMAMUX_SOURCE_ALWAYS9 63
495 // Chapter 21: Direct Memory Access Controller (eDMA)
496 #define DMA_CR *(volatile uint32_t *)0x40008000 // Control Register
497 #define DMA_CR_CX ((uint32_t)(1<<17)) // Cancel Transfer
498 #define DMA_CR_ECX ((uint32_t)(1<<16)) // Error Cancel Transfer
499 #define DMA_CR_EMLM ((uint32_t)0x80) // Enable Minor Loop Mapping
500 #define DMA_CR_CLM ((uint32_t)0x40) // Continuous Link Mode
501 #define DMA_CR_HALT ((uint32_t)0x20) // Halt DMA Operations
502 #define DMA_CR_HOE ((uint32_t)0x10) // Halt On Error
503 #define DMA_CR_ERCA ((uint32_t)0x04) // Enable Round Robin Channel Arbitration
504 #define DMA_CR_EDBG ((uint32_t)0x02) // Enable Debug
505 #define DMA_ES *(volatile uint32_t *)0x40008004 // Error Status Register
506 #define DMA_ERQ *(volatile uint32_t *)0x4000800C // Enable Request Register
507 #define DMA_ERQ_ERQ0 ((uint32_t)1<<0) // Enable DMA Request 0
508 #define DMA_ERQ_ERQ1 ((uint32_t)1<<1) // Enable DMA Request 1
509 #define DMA_ERQ_ERQ2 ((uint32_t)1<<2) // Enable DMA Request 2
510 #define DMA_ERQ_ERQ3 ((uint32_t)1<<3) // Enable DMA Request 3
511 #define DMA_EEI *(volatile uint32_t *)0x40008014 // Enable Error Interrupt Register
512 #define DMA_EEI_EEI0 ((uint32_t)1<<0) // Enable Error Interrupt 0
513 #define DMA_EEI_EEI1 ((uint32_t)1<<1) // Enable Error Interrupt 1
514 #define DMA_EEI_EEI2 ((uint32_t)1<<2) // Enable Error Interrupt 2
515 #define DMA_EEI_EEI3 ((uint32_t)1<<3) // Enable Error Interrupt 3
516 #define DMA_CEEI *(volatile uint8_t *)0x40008018 // Clear Enable Error Interrupt Register
517 #define DMA_CEEI_CEEI(n) ((uint8_t)(n & 3)<<0) // Clear Enable Error Interrupt
518 #define DMA_CEEI_CAEE ((uint8_t)1<<6) // Clear All Enable Error Interrupts
519 #define DMA_CEEI_NOP ((uint8_t)1<<7) // NOP
520 #define DMA_SEEI *(volatile uint8_t *)0x40008019 // Set Enable Error Interrupt Register
521 #define DMA_SEEI_SEEI(n) ((uint8_t)(n & 3)<<0) // Set Enable Error Interrupt
522 #define DMA_SEEI_SAEE ((uint8_t)1<<6) // Set All Enable Error Interrupts
523 #define DMA_SEEI_NOP ((uint8_t)1<<7) // NOP
524 #define DMA_CERQ *(volatile uint8_t *)0x4000801A // Clear Enable Request Register
525 #define DMA_CERQ_CERQ(n) ((uint8_t)(n & 3)<<0) // Clear Enable Request
526 #define DMA_CERQ_CAER ((uint8_t)1<<6) // Clear All Enable Requests
527 #define DMA_CERQ_NOP ((uint8_t)1<<7) // NOP
528 #define DMA_SERQ *(volatile uint8_t *)0x4000801B // Set Enable Request Register
529 #define DMA_SERQ_SERQ(n) ((uint8_t)(n & 3)<<0) // Set Enable Request
530 #define DMA_SERQ_SAER ((uint8_t)1<<6) // Set All Enable Requests
531 #define DMA_SERQ_NOP ((uint8_t)1<<7) // NOP
532 #define DMA_CDNE *(volatile uint8_t *)0x4000801C // Clear DONE Status Bit Register
533 #define DMA_CDNE_CDNE(n) ((uint8_t)(n & 3)<<0) // Clear Done Bit
534 #define DMA_CDNE_CADN ((uint8_t)1<<6) // Clear All Done Bits
535 #define DMA_CDNE_NOP ((uint8_t)1<<7) // NOP
536 #define DMA_SSRT *(volatile uint8_t *)0x4000801D // Set START Bit Register
537 #define DMA_SSRT_SSRT(n) ((uint8_t)(n & 3)<<0) // Set Start Bit
538 #define DMA_SSRT_SAST ((uint8_t)1<<6) // Set All Start Bits
539 #define DMA_SSRT_NOP ((uint8_t)1<<7) // NOP
540 #define DMA_CERR *(volatile uint8_t *)0x4000801E // Clear Error Register
541 #define DMA_CERR_CERR(n) ((uint8_t)(n & 3)<<0) // Clear Error Indicator
542 #define DMA_CERR_CAEI ((uint8_t)1<<6) // Clear All Error Indicators
543 #define DMA_CERR_NOP ((uint8_t)1<<7) // NOP
544 #define DMA_CINT *(volatile uint8_t *)0x4000801F // Clear Interrupt Request Register
545 #define DMA_CINT_CINT(n) ((uint8_t)(n & 3)<<0) // Clear Interrupt Request
546 #define DMA_CINT_CAIR ((uint8_t)1<<6) // Clear All Interrupt Requests
547 #define DMA_CINT_NOP ((uint8_t)1<<7) // NOP
548 #define DMA_INT *(volatile uint32_t *)0x40008024 // Interrupt Request Register
549 #define DMA_INT_INT0 ((uint32_t)1<<0) // Interrupt Request 0
550 #define DMA_INT_INT1 ((uint32_t)1<<1) // Interrupt Request 1
551 #define DMA_INT_INT2 ((uint32_t)1<<2) // Interrupt Request 2
552 #define DMA_INT_INT3 ((uint32_t)1<<3) // Interrupt Request 3
553 #define DMA_ERR *(volatile uint32_t *)0x4000802C // Error Register
554 #define DMA_ERR_ERR0 ((uint32_t)1<<0) // Error in Channel 0
555 #define DMA_ERR_ERR1 ((uint32_t)1<<1) // Error in Channel 1
556 #define DMA_ERR_ERR2 ((uint32_t)1<<2) // Error in Channel 2
557 #define DMA_ERR_ERR3 ((uint32_t)1<<3) // Error in Channel 3
558 #define DMA_HRS *(volatile uint32_t *)0x40008034 // Hardware Request Status Register
559 #define DMA_HRS_HRS0 ((uint32_t)1<<0) // Hardware Request Status Channel 0
560 #define DMA_HRS_HRS1 ((uint32_t)1<<1) // Hardware Request Status Channel 1
561 #define DMA_HRS_HRS2 ((uint32_t)1<<2) // Hardware Request Status Channel 2
562 #define DMA_HRS_HRS3 ((uint32_t)1<<3) // Hardware Request Status Channel 3
563 #define DMA_DCHPRI3 *(volatile uint8_t *)0x40008100 // Channel n Priority Register
564 #define DMA_DCHPRI2 *(volatile uint8_t *)0x40008101 // Channel n Priority Register
565 #define DMA_DCHPRI1 *(volatile uint8_t *)0x40008102 // Channel n Priority Register
566 #define DMA_DCHPRI0 *(volatile uint8_t *)0x40008103 // Channel n Priority Register
567 #define DMA_DCHPRI_CHPRI(n) ((uint8_t)(n & 3)<<0) // Channel Arbitration Priority
568 #define DMA_DCHPRI_DPA ((uint8_t)1<<6) // Disable PreEmpt Ability
569 #define DMA_DCHPRI_ECP ((uint8_t)1<<7) // Enable PreEmption
572 #define DMA_TCD_ATTR_SMOD(n) (((n) & 0x1F) << 11)
573 #define DMA_TCD_ATTR_SSIZE(n) (((n) & 0x7) << 8)
574 #define DMA_TCD_ATTR_DMOD(n) (((n) & 0x1F) << 3)
575 #define DMA_TCD_ATTR_DSIZE(n) (((n) & 0x7) << 0)
576 #define DMA_TCD_ATTR_SIZE_8BIT 0
577 #define DMA_TCD_ATTR_SIZE_16BIT 1
578 #define DMA_TCD_ATTR_SIZE_32BIT 2
579 #define DMA_TCD_ATTR_SIZE_16BYTE 4
580 #define DMA_TCD_ATTR_SIZE_32BYTE 5
581 #define DMA_TCD_CSR_BWC(n) (((n) & 0x3) << 14)
582 #define DMA_TCD_CSR_MAJORLINKCH(n) (((n) & 0x3) << 8)
583 #define DMA_TCD_CSR_DONE 0x0080
584 #define DMA_TCD_CSR_ACTIVE 0x0040
585 #define DMA_TCD_CSR_MAJORELINK 0x0020
586 #define DMA_TCD_CSR_ESG 0x0010
587 #define DMA_TCD_CSR_DREQ 0x0008
588 #define DMA_TCD_CSR_INTHALF 0x0004
589 #define DMA_TCD_CSR_INTMAJOR 0x0002
590 #define DMA_TCD_CSR_START 0x0001
591 #define DMA_TCD_CITER_MASK ((uint16_t)0x7FFF) // Loop count mask
592 #define DMA_TCD_CITER_ELINK ((uint16_t)1<<15) // Enable channel linking on minor-loop complete
593 #define DMA_TCD_BITER_MASK ((uint16_t)0x7FFF) // Loop count mask
594 #define DMA_TCD_BITER_ELINK ((uint16_t)1<<15) // Enable channel linking on minor-loop complete
595 #define DMA_TCD_NBYTES_SMLOE ((uint32_t)1<<31) // Source Minor Loop Offset Enable
596 #define DMA_TCD_NBYTES_DMLOE ((uint32_t)1<<30) // Destination Minor Loop Offset Enable
597 #define DMA_TCD_NBYTES_MLOFFNO_NBYTES(n) ((uint32_t)(n)) // NBytes transfer count when minor loop disabled
598 #define DMA_TCD_NBYTES_MLOFFYES_NBYTES(n) ((uint32_t)(n & 0x1F)) // NBytes transfer count when minor loop enabled
599 #define DMA_TCD_NBYTES_MLOFFYES_MLOFF(n) ((uint32_t)(n & 0xFFFFF)<<10) // Offset
601 #define DMA_TCD0_SADDR *(volatile const void * volatile *)0x40009000 // TCD Source Address
602 #define DMA_TCD0_SOFF *(volatile int16_t *)0x40009004 // TCD Signed Source Address Offset
603 #define DMA_TCD0_ATTR *(volatile uint16_t *)0x40009006 // TCD Transfer Attributes
604 #define DMA_TCD0_NBYTES_MLNO *(volatile uint32_t *)0x40009008 // TCD Minor Byte Count (Minor Loop Disabled)
605 #define DMA_TCD0_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009008 // TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled)
606 #define DMA_TCD0_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009008 // TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled)
607 #define DMA_TCD0_SLAST *(volatile int32_t *)0x4000900C // TCD Last Source Address Adjustment
608 #define DMA_TCD0_DADDR *(volatile void * volatile *)0x40009010 // TCD Destination Address
609 #define DMA_TCD0_DOFF *(volatile int16_t *)0x40009014 // TCD Signed Destination Address Offset
610 #define DMA_TCD0_CITER_ELINKYES *(volatile uint16_t *)0x40009016 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
611 #define DMA_TCD0_CITER_ELINKNO *(volatile uint16_t *)0x40009016 // ??
612 #define DMA_TCD0_DLASTSGA *(volatile int32_t *)0x40009018 // TCD Last Destination Address Adjustment/Scatter Gather Address
613 #define DMA_TCD0_CSR *(volatile uint16_t *)0x4000901C // TCD Control and Status
614 #define DMA_TCD0_BITER_ELINKYES *(volatile uint16_t *)0x4000901E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled
615 #define DMA_TCD0_BITER_ELINKNO *(volatile uint16_t *)0x4000901E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled
617 #define DMA_TCD1_SADDR *(volatile const void * volatile *)0x40009020 // TCD Source Address
618 #define DMA_TCD1_SOFF *(volatile int16_t *)0x40009024 // TCD Signed Source Address Offset
619 #define DMA_TCD1_ATTR *(volatile uint16_t *)0x40009026 // TCD Transfer Attributes
620 #define DMA_TCD1_NBYTES_MLNO *(volatile uint32_t *)0x40009028 // TCD Minor Byte Count, Minor Loop Disabled
621 #define DMA_TCD1_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009028 // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled
622 #define DMA_TCD1_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009028 // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled
623 #define DMA_TCD1_SLAST *(volatile int32_t *)0x4000902C // TCD Last Source Address Adjustment
624 #define DMA_TCD1_DADDR *(volatile void * volatile *)0x40009030 // TCD Destination Address
625 #define DMA_TCD1_DOFF *(volatile int16_t *)0x40009034 // TCD Signed Destination Address Offset
626 #define DMA_TCD1_CITER_ELINKYES *(volatile uint16_t *)0x40009036 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
627 #define DMA_TCD1_CITER_ELINKNO *(volatile uint16_t *)0x40009036 // ??
628 #define DMA_TCD1_DLASTSGA *(volatile int32_t *)0x40009038 // TCD Last Destination Address Adjustment/Scatter Gather Address
629 #define DMA_TCD1_CSR *(volatile uint16_t *)0x4000903C // TCD Control and Status
630 #define DMA_TCD1_BITER_ELINKYES *(volatile uint16_t *)0x4000903E // TCD Beginning Minor Loop Link, Major Loop Count Channel Linking Enabled
631 #define DMA_TCD1_BITER_ELINKNO *(volatile uint16_t *)0x4000903E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled
633 #define DMA_TCD2_SADDR *(volatile const void * volatile *)0x40009040 // TCD Source Address
634 #define DMA_TCD2_SOFF *(volatile int16_t *)0x40009044 // TCD Signed Source Address Offset
635 #define DMA_TCD2_ATTR *(volatile uint16_t *)0x40009046 // TCD Transfer Attributes
636 #define DMA_TCD2_NBYTES_MLNO *(volatile uint32_t *)0x40009048 // TCD Minor Byte Count, Minor Loop Disabled
637 #define DMA_TCD2_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009048 // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled
638 #define DMA_TCD2_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009048 // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled
639 #define DMA_TCD2_SLAST *(volatile int32_t *)0x4000904C // TCD Last Source Address Adjustment
640 #define DMA_TCD2_DADDR *(volatile void * volatile *)0x40009050 // TCD Destination Address
641 #define DMA_TCD2_DOFF *(volatile int16_t *)0x40009054 // TCD Signed Destination Address Offset
642 #define DMA_TCD2_CITER_ELINKYES *(volatile uint16_t *)0x40009056 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
643 #define DMA_TCD2_CITER_ELINKNO *(volatile uint16_t *)0x40009056 // ??
644 #define DMA_TCD2_DLASTSGA *(volatile int32_t *)0x40009058 // TCD Last Destination Address Adjustment/Scatter Gather Address
645 #define DMA_TCD2_CSR *(volatile uint16_t *)0x4000905C // TCD Control and Status
646 #define DMA_TCD2_BITER_ELINKYES *(volatile uint16_t *)0x4000905E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Enabled
647 #define DMA_TCD2_BITER_ELINKNO *(volatile uint16_t *)0x4000905E // TCD Beginning Minor Loop Link, Major Loop Count, Channel Linking Disabled
649 #define DMA_TCD3_SADDR *(volatile const void * volatile *)0x40009060 // TCD Source Address
650 #define DMA_TCD3_SOFF *(volatile int16_t *)0x40009064 // TCD Signed Source Address Offset
651 #define DMA_TCD3_ATTR *(volatile uint16_t *)0x40009066 // TCD Transfer Attributes
652 #define DMA_TCD3_NBYTES_MLNO *(volatile uint32_t *)0x40009068 // TCD Minor Byte Count, Minor Loop Disabled
653 #define DMA_TCD3_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009068 // TCD Signed Minor Loop Offset, Minor Loop Enabled and Offset Disabled
654 #define DMA_TCD3_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009068 // TCD Signed Minor Loop Offset, Minor Loop and Offset Enabled
655 #define DMA_TCD3_SLAST *(volatile int32_t *)0x4000906C // TCD Last Source Address Adjustment
656 #define DMA_TCD3_DADDR *(volatile void * volatile *)0x40009070 // TCD Destination Address
657 #define DMA_TCD3_DOFF *(volatile int16_t *)0x40009074 // TCD Signed Destination Address Offset
658 #define DMA_TCD3_CITER_ELINKYES *(volatile uint16_t *)0x40009076 // TCD Current Minor Loop Link, Major Loop Count, Channel Linking Enabled
659 #define DMA_TCD3_CITER_ELINKNO *(volatile uint16_t *)0x40009076 // ??
660 #define DMA_TCD3_DLASTSGA *(volatile int32_t *)0x40009078 // TCD Last Destination Address Adjustment/Scatter Gather Address
661 #define DMA_TCD3_CSR *(volatile uint16_t *)0x4000907C // TCD Control and Status
662 #define DMA_TCD3_BITER_ELINKYES *(volatile uint16_t *)0x4000907E // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Enabled
663 #define DMA_TCD3_BITER_ELINKNO *(volatile uint16_t *)0x4000907E // TCD Beginning Minor Loop Link, Major Loop Count ,Channel Linking Disabled
665 #define DMA_TCD4_SADDR *(volatile const void * volatile *)0x40009080 // TCD Source Addr
666 #define DMA_TCD4_SOFF *(volatile int16_t *)0x40009084 // TCD Signed Source Address Offset
667 #define DMA_TCD4_ATTR *(volatile uint16_t *)0x40009086 // TCD Transfer Attributes
668 #define DMA_TCD4_NBYTES_MLNO *(volatile uint32_t *)0x40009088 // TCD Minor Byte Count
669 #define DMA_TCD4_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009088 // TCD Signed Minor Loop Offset
670 #define DMA_TCD4_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009088 // TCD Signed Minor Loop Offset
671 #define DMA_TCD4_SLAST *(volatile int32_t *)0x4000908C // TCD Last Source Addr Adj.
672 #define DMA_TCD4_DADDR *(volatile void * volatile *)0x40009090 // TCD Destination Address
673 #define DMA_TCD4_DOFF *(volatile int16_t *)0x40009094 // TCD Signed Dest Address Offset
674 #define DMA_TCD4_CITER_ELINKYES *(volatile uint16_t *)0x40009096 // TCD Current Minor Loop Link
675 #define DMA_TCD4_CITER_ELINKNO *(volatile uint16_t *)0x40009096 // ??
676 #define DMA_TCD4_DLASTSGA *(volatile int32_t *)0x40009098 // TCD Last Destination Addr Adj
677 #define DMA_TCD4_CSR *(volatile uint16_t *)0x4000909C // TCD Control and Status
678 #define DMA_TCD4_BITER_ELINKYES *(volatile uint16_t *)0x4000909E // TCD Beginning Minor Loop Link
679 #define DMA_TCD4_BITER_ELINKNO *(volatile uint16_t *)0x4000909E // TCD Beginning Minor Loop Link
681 #define DMA_TCD5_SADDR *(volatile const void * volatile *)0x400090A0 // TCD Source Addr
682 #define DMA_TCD5_SOFF *(volatile int16_t *)0x400090A4 // TCD Signed Source Address Offset
683 #define DMA_TCD5_ATTR *(volatile uint16_t *)0x400090A6 // TCD Transfer Attributes
684 #define DMA_TCD5_NBYTES_MLNO *(volatile uint32_t *)0x400090A8 // TCD Minor Byte Count
685 #define DMA_TCD5_NBYTES_MLOFFNO *(volatile uint32_t *)0x400090A8 // TCD Signed Minor Loop Offset
686 #define DMA_TCD5_NBYTES_MLOFFYES *(volatile uint32_t *)0x400090A8 // TCD Signed Minor Loop Offset
687 #define DMA_TCD5_SLAST *(volatile int32_t *)0x400090AC // TCD Last Source Addr Adj.
688 #define DMA_TCD5_DADDR *(volatile void * volatile *)0x400090B0 // TCD Destination Address
689 #define DMA_TCD5_DOFF *(volatile int16_t *)0x400090B4 // TCD Signed Dest Address Offset
690 #define DMA_TCD5_CITER_ELINKYES *(volatile uint16_t *)0x400090B6 // TCD Current Minor Loop Link
691 #define DMA_TCD5_CITER_ELINKNO *(volatile uint16_t *)0x400090B6 // ??
692 #define DMA_TCD5_DLASTSGA *(volatile int32_t *)0x400090B8 // TCD Last Destination Addr Adj
693 #define DMA_TCD5_CSR *(volatile uint16_t *)0x400090BC // TCD Control and Status
694 #define DMA_TCD5_BITER_ELINKYES *(volatile uint16_t *)0x400090BE // TCD Beginning Minor Loop Link
695 #define DMA_TCD5_BITER_ELINKNO *(volatile uint16_t *)0x400090BE // TCD Beginning Minor Loop Link
697 #define DMA_TCD6_SADDR *(volatile const void * volatile *)0x400090C0 // TCD Source Addr
698 #define DMA_TCD6_SOFF *(volatile int16_t *)0x400090C4 // TCD Signed Source Address Offset
699 #define DMA_TCD6_ATTR *(volatile uint16_t *)0x400090C6 // TCD Transfer Attributes
700 #define DMA_TCD6_NBYTES_MLNO *(volatile uint32_t *)0x400090C8 // TCD Minor Byte Count
701 #define DMA_TCD6_NBYTES_MLOFFNO *(volatile uint32_t *)0x400090C8 // TCD Signed Minor Loop Offset
702 #define DMA_TCD6_NBYTES_MLOFFYES *(volatile uint32_t *)0x400090C8 // TCD Signed Minor Loop Offset
703 #define DMA_TCD6_SLAST *(volatile int32_t *)0x400090CC // TCD Last Source Addr Adj.
704 #define DMA_TCD6_DADDR *(volatile void * volatile *)0x400090D0 // TCD Destination Address
705 #define DMA_TCD6_DOFF *(volatile int16_t *)0x400090D4 // TCD Signed Dest Address Offset
706 #define DMA_TCD6_CITER_ELINKYES *(volatile uint16_t *)0x400090D6 // TCD Current Minor Loop Link
707 #define DMA_TCD6_CITER_ELINKNO *(volatile uint16_t *)0x400090D6 // ??
708 #define DMA_TCD6_DLASTSGA *(volatile int32_t *)0x400090D8 // TCD Last Destination Addr Adj
709 #define DMA_TCD6_CSR *(volatile uint16_t *)0x400090DC // TCD Control and Status
710 #define DMA_TCD6_BITER_ELINKYES *(volatile uint16_t *)0x400090DE // TCD Beginning Minor Loop Link
711 #define DMA_TCD6_BITER_ELINKNO *(volatile uint16_t *)0x400090DE // TCD Beginning Minor Loop Link
713 #define DMA_TCD7_SADDR *(volatile const void * volatile *)0x400090E0 // TCD Source Addr
714 #define DMA_TCD7_SOFF *(volatile int16_t *)0x400090E4 // TCD Signed Source Address Offset
715 #define DMA_TCD7_ATTR *(volatile uint16_t *)0x400090E6 // TCD Transfer Attributes
716 #define DMA_TCD7_NBYTES_MLNO *(volatile uint32_t *)0x400090E8 // TCD Minor Byte Count
717 #define DMA_TCD7_NBYTES_MLOFFNO *(volatile uint32_t *)0x400090E8 // TCD Signed Minor Loop Offset
718 #define DMA_TCD7_NBYTES_MLOFFYES *(volatile uint32_t *)0x400090E8 // TCD Signed Minor Loop Offset
719 #define DMA_TCD7_SLAST *(volatile int32_t *)0x400090EC // TCD Last Source Addr Adj.
720 #define DMA_TCD7_DADDR *(volatile void * volatile *)0x400090F0 // TCD Destination Address
721 #define DMA_TCD7_DOFF *(volatile int16_t *)0x400090F4 // TCD Signed Dest Address Offset
722 #define DMA_TCD7_CITER_ELINKYES *(volatile uint16_t *)0x400090F6 // TCD Current Minor Loop Link
723 #define DMA_TCD7_CITER_ELINKNO *(volatile uint16_t *)0x400090F6 // ??
724 #define DMA_TCD7_DLASTSGA *(volatile int32_t *)0x400090F8 // TCD Last Destination Addr Adj
725 #define DMA_TCD7_CSR *(volatile uint16_t *)0x400090FC // TCD Control and Status
726 #define DMA_TCD7_BITER_ELINKYES *(volatile uint16_t *)0x400090FE // TCD Beginning Minor Loop Link
727 #define DMA_TCD7_BITER_ELINKNO *(volatile uint16_t *)0x400090FE // TCD Beginning Minor Loop Link
729 #define DMA_TCD8_SADDR *(volatile const void * volatile *)0x40009100 // TCD Source Addr
730 #define DMA_TCD8_SOFF *(volatile int16_t *)0x40009104 // TCD Signed Source Address Offset
731 #define DMA_TCD8_ATTR *(volatile uint16_t *)0x40009106 // TCD Transfer Attributes
732 #define DMA_TCD8_NBYTES_MLNO *(volatile uint32_t *)0x40009108 // TCD Minor Byte Count
733 #define DMA_TCD8_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009108 // TCD Signed Minor Loop Offset
734 #define DMA_TCD8_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009108 // TCD Signed Minor Loop Offset
735 #define DMA_TCD8_SLAST *(volatile int32_t *)0x4000910C // TCD Last Source Addr Adj.
736 #define DMA_TCD8_DADDR *(volatile void * volatile *)0x40009110 // TCD Destination Address
737 #define DMA_TCD8_DOFF *(volatile int16_t *)0x40009114 // TCD Signed Dest Address Offset
738 #define DMA_TCD8_CITER_ELINKYES *(volatile uint16_t *)0x40009116 // TCD Current Minor Loop Link
739 #define DMA_TCD8_CITER_ELINKNO *(volatile uint16_t *)0x40009116 // ??
740 #define DMA_TCD8_DLASTSGA *(volatile int32_t *)0x40009118 // TCD Last Destination Addr Adj
741 #define DMA_TCD8_CSR *(volatile uint16_t *)0x4000911C // TCD Control and Status
742 #define DMA_TCD8_BITER_ELINKYES *(volatile uint16_t *)0x4000911E // TCD Beginning Minor Loop Link
743 #define DMA_TCD8_BITER_ELINKNO *(volatile uint16_t *)0x4000911E // TCD Beginning Minor Loop Link
745 #define DMA_TCD9_SADDR *(volatile const void * volatile *)0x40009120 // TCD Source Addr
746 #define DMA_TCD9_SOFF *(volatile int16_t *)0x40009124 // TCD Signed Source Address Offset
747 #define DMA_TCD9_ATTR *(volatile uint16_t *)0x40009126 // TCD Transfer Attributes
748 #define DMA_TCD9_NBYTES_MLNO *(volatile uint32_t *)0x40009128 // TCD Minor Byte Count
749 #define DMA_TCD9_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009128 // TCD Signed Minor Loop Offset
750 #define DMA_TCD9_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009128 // TCD Signed Minor Loop Offset
751 #define DMA_TCD9_SLAST *(volatile int32_t *)0x4000912C // TCD Last Source Addr Adj.
752 #define DMA_TCD9_DADDR *(volatile void * volatile *)0x40009130 // TCD Destination Address
753 #define DMA_TCD9_DOFF *(volatile int16_t *)0x40009134 // TCD Signed Dest Address Offset
754 #define DMA_TCD9_CITER_ELINKYES *(volatile uint16_t *)0x40009136 // TCD Current Minor Loop Link
755 #define DMA_TCD9_CITER_ELINKNO *(volatile uint16_t *)0x40009136 // ??
756 #define DMA_TCD9_DLASTSGA *(volatile int32_t *)0x40009138 // TCD Last Destination Addr Adj
757 #define DMA_TCD9_CSR *(volatile uint16_t *)0x4000913C // TCD Control and Status
758 #define DMA_TCD9_BITER_ELINKYES *(volatile uint16_t *)0x4000913E // TCD Beginning Minor Loop Link
759 #define DMA_TCD9_BITER_ELINKNO *(volatile uint16_t *)0x4000913E // TCD Beginning Minor Loop Link
761 #define DMA_TCD10_SADDR *(volatile const void * volatile *)0x40009140 // TCD Source Addr
762 #define DMA_TCD10_SOFF *(volatile int16_t *)0x40009144 // TCD Signed Source Address Offset
763 #define DMA_TCD10_ATTR *(volatile uint16_t *)0x40009146 // TCD Transfer Attributes
764 #define DMA_TCD10_NBYTES_MLNO *(volatile uint32_t *)0x40009148 // TCD Minor Byte Count
765 #define DMA_TCD10_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009148 // TCD Signed Minor Loop Offset
766 #define DMA_TCD10_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009148 // TCD Signed Minor Loop Offset
767 #define DMA_TCD10_SLAST *(volatile int32_t *)0x4000914C // TCD Last Source Addr Adj.
768 #define DMA_TCD10_DADDR *(volatile void * volatile *)0x40009150 // TCD Destination Address
769 #define DMA_TCD10_DOFF *(volatile int16_t *)0x40009154 // TCD Signed Dest Address Offset
770 #define DMA_TCD10_CITER_ELINKYES *(volatile uint16_t *)0x40009156 // TCD Current Minor Loop Link
771 #define DMA_TCD10_CITER_ELINKNO *(volatile uint16_t *)0x40009156 // ??
772 #define DMA_TCD10_DLASTSGA *(volatile int32_t *)0x40009158 // TCD Last Destination Addr Adj
773 #define DMA_TCD10_CSR *(volatile uint16_t *)0x4000915C // TCD Control and Status
774 #define DMA_TCD10_BITER_ELINKYES *(volatile uint16_t *)0x4000915E // TCD Beginning Minor Loop Link
775 #define DMA_TCD10_BITER_ELINKNO *(volatile uint16_t *)0x4000915E // TCD Beginning Minor Loop Link
777 #define DMA_TCD11_SADDR *(volatile const void * volatile *)0x40009160 // TCD Source Addr
778 #define DMA_TCD11_SOFF *(volatile int16_t *)0x40009164 // TCD Signed Source Address Offset
779 #define DMA_TCD11_ATTR *(volatile uint16_t *)0x40009166 // TCD Transfer Attributes
780 #define DMA_TCD11_NBYTES_MLNO *(volatile uint32_t *)0x40009168 // TCD Minor Byte Count
781 #define DMA_TCD11_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009168 // TCD Signed Minor Loop Offset
782 #define DMA_TCD11_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009168 // TCD Signed Minor Loop Offset
783 #define DMA_TCD11_SLAST *(volatile int32_t *)0x4000916C // TCD Last Source Addr Adj.
784 #define DMA_TCD11_DADDR *(volatile void * volatile *)0x40009170 // TCD Destination Address
785 #define DMA_TCD11_DOFF *(volatile int16_t *)0x40009174 // TCD Signed Dest Address Offset
786 #define DMA_TCD11_CITER_ELINKYES *(volatile uint16_t *)0x40009176 // TCD Current Minor Loop Link
787 #define DMA_TCD11_CITER_ELINKNO *(volatile uint16_t *)0x40009176 // ??
788 #define DMA_TCD11_DLASTSGA *(volatile int32_t *)0x40009178 // TCD Last Destination Addr Adj
789 #define DMA_TCD11_CSR *(volatile uint16_t *)0x4000917C // TCD Control and Status
790 #define DMA_TCD11_BITER_ELINKYES *(volatile uint16_t *)0x4000917E // TCD Beginning Minor Loop Link
791 #define DMA_TCD11_BITER_ELINKNO *(volatile uint16_t *)0x4000917E // TCD Beginning Minor Loop Link
793 #define DMA_TCD12_SADDR *(volatile const void * volatile *)0x40009180 // TCD Source Addr
794 #define DMA_TCD12_SOFF *(volatile int16_t *)0x40009184 // TCD Signed Source Address Offset
795 #define DMA_TCD12_ATTR *(volatile uint16_t *)0x40009186 // TCD Transfer Attributes
796 #define DMA_TCD12_NBYTES_MLNO *(volatile uint32_t *)0x40009188 // TCD Minor Byte Count
797 #define DMA_TCD12_NBYTES_MLOFFNO *(volatile uint32_t *)0x40009188 // TCD Signed Minor Loop Offset
798 #define DMA_TCD12_NBYTES_MLOFFYES *(volatile uint32_t *)0x40009188 // TCD Signed Minor Loop Offset
799 #define DMA_TCD12_SLAST *(volatile int32_t *)0x4000918C // TCD Last Source Addr Adj.
800 #define DMA_TCD12_DADDR *(volatile void * volatile *)0x40009190 // TCD Destination Address
801 #define DMA_TCD12_DOFF *(volatile int16_t *)0x40009194 // TCD Signed Dest Address Offset
802 #define DMA_TCD12_CITER_ELINKYES *(volatile uint16_t *)0x40009196 // TCD Current Minor Loop Link
803 #define DMA_TCD12_CITER_ELINKNO *(volatile uint16_t *)0x40009196 // ??
804 #define DMA_TCD12_DLASTSGA *(volatile int32_t *)0x40009198 // TCD Last Destination Addr Adj
805 #define DMA_TCD12_CSR *(volatile uint16_t *)0x4000919C // TCD Control and Status
806 #define DMA_TCD12_BITER_ELINKYES *(volatile uint16_t *)0x4000919E // TCD Beginning Minor Loop Link
807 #define DMA_TCD12_BITER_ELINKNO *(volatile uint16_t *)0x4000919E // TCD Beginning Minor Loop Link
809 #define DMA_TCD13_SADDR *(volatile const void * volatile *)0x400091A0 // TCD Source Addr
810 #define DMA_TCD13_SOFF *(volatile int16_t *)0x400091A4 // TCD Signed Source Address Offset
811 #define DMA_TCD13_ATTR *(volatile uint16_t *)0x400091A6 // TCD Transfer Attributes
812 #define DMA_TCD13_NBYTES_MLNO *(volatile uint32_t *)0x400091A8 // TCD Minor Byte Count
813 #define DMA_TCD13_NBYTES_MLOFFNO *(volatile uint32_t *)0x400091A8 // TCD Signed Minor Loop Offset
814 #define DMA_TCD13_NBYTES_MLOFFYES *(volatile uint32_t *)0x400091A8 // TCD Signed Minor Loop Offset
815 #define DMA_TCD13_SLAST *(volatile int32_t *)0x400091AC // TCD Last Source Addr Adj.
816 #define DMA_TCD13_DADDR *(volatile void * volatile *)0x400091B0 // TCD Destination Address
817 #define DMA_TCD13_DOFF *(volatile int16_t *)0x400091B4 // TCD Signed Dest Address Offset
818 #define DMA_TCD13_CITER_ELINKYES *(volatile uint16_t *)0x400091B6 // TCD Current Minor Loop Link
819 #define DMA_TCD13_CITER_ELINKNO *(volatile uint16_t *)0x400091B6 // ??
820 #define DMA_TCD13_DLASTSGA *(volatile int32_t *)0x400091B8 // TCD Last Destination Addr Adj
821 #define DMA_TCD13_CSR *(volatile uint16_t *)0x400091BC // TCD Control and Status
822 #define DMA_TCD13_BITER_ELINKYES *(volatile uint16_t *)0x400091BE // TCD Beginning Minor Loop Link
823 #define DMA_TCD13_BITER_ELINKNO *(volatile uint16_t *)0x400091BE // TCD Beginning Minor Loop Link
825 #define DMA_TCD14_SADDR *(volatile const void * volatile *)0x400091C0 // TCD Source Addr
826 #define DMA_TCD14_SOFF *(volatile int16_t *)0x400091C4 // TCD Signed Source Address Offset
827 #define DMA_TCD14_ATTR *(volatile uint16_t *)0x400091C6 // TCD Transfer Attributes
828 #define DMA_TCD14_NBYTES_MLNO *(volatile uint32_t *)0x400091C8 // TCD Minor Byte Count
829 #define DMA_TCD14_NBYTES_MLOFFNO *(volatile uint32_t *)0x400091C8 // TCD Signed Minor Loop Offset
830 #define DMA_TCD14_NBYTES_MLOFFYES *(volatile uint32_t *)0x400091C8 // TCD Signed Minor Loop Offset
831 #define DMA_TCD14_SLAST *(volatile int32_t *)0x400091CC // TCD Last Source Addr Adj.
832 #define DMA_TCD14_DADDR *(volatile void * volatile *)0x400091D0 // TCD Destination Address
833 #define DMA_TCD14_DOFF *(volatile int16_t *)0x400091D4 // TCD Signed Dest Address Offset
834 #define DMA_TCD14_CITER_ELINKYES *(volatile uint16_t *)0x400091D6 // TCD Current Minor Loop Link
835 #define DMA_TCD14_CITER_ELINKNO *(volatile uint16_t *)0x400091D6 // ??
836 #define DMA_TCD14_DLASTSGA *(volatile int32_t *)0x400091D8 // TCD Last Destination Addr Adj
837 #define DMA_TCD14_CSR *(volatile uint16_t *)0x400091DC // TCD Control and Status
838 #define DMA_TCD14_BITER_ELINKYES *(volatile uint16_t *)0x400091DE // TCD Beginning Minor Loop Link
839 #define DMA_TCD14_BITER_ELINKNO *(volatile uint16_t *)0x400091DE // TCD Beginning Minor Loop Link
841 #define DMA_TCD15_SADDR *(volatile const void * volatile *)0x400091E0 // TCD Source Addr
842 #define DMA_TCD15_SOFF *(volatile int16_t *)0x400091E4 // TCD Signed Source Address Offset
843 #define DMA_TCD15_ATTR *(volatile uint16_t *)0x400091E6 // TCD Transfer Attributes
844 #define DMA_TCD15_NBYTES_MLNO *(volatile uint32_t *)0x400091E8 // TCD Minor Byte Count
845 #define DMA_TCD15_NBYTES_MLOFFNO *(volatile uint32_t *)0x400091E8 // TCD Signed Minor Loop Offset
846 #define DMA_TCD15_NBYTES_MLOFFYES *(volatile uint32_t *)0x400091E8 // TCD Signed Minor Loop Offset
847 #define DMA_TCD15_SLAST *(volatile int32_t *)0x400091EC // TCD Last Source Addr Adj.
848 #define DMA_TCD15_DADDR *(volatile void * volatile *)0x400091F0 // TCD Destination Address
849 #define DMA_TCD15_DOFF *(volatile int16_t *)0x400091F4 // TCD Signed Dest Address Offset
850 #define DMA_TCD15_CITER_ELINKYES *(volatile uint16_t *)0x400091F6 // TCD Current Minor Loop Link
851 #define DMA_TCD15_CITER_ELINKNO *(volatile uint16_t *)0x400091F6 // ??
852 #define DMA_TCD15_DLASTSGA *(volatile int32_t *)0x400091F8 // TCD Last Destination Addr Adj
853 #define DMA_TCD15_CSR *(volatile uint16_t *)0x400091FC // TCD Control and Status
854 #define DMA_TCD15_BITER_ELINKYES *(volatile uint16_t *)0x400091FE // TCD Beginning Minor Loop Link
855 #define DMA_TCD15_BITER_ELINKNO *(volatile uint16_t *)0x400091FE // TCD Beginning Minor Loop Link
858 // Chapter 22: External Watchdog Monitor (EWM)
859 #define EWM_CTRL *(volatile uint8_t *)0x40061000 // Control Register
860 #define EWM_SERV *(volatile uint8_t *)0x40061001 // Service Register
861 #define EWM_CMPL *(volatile uint8_t *)0x40061002 // Compare Low Register
862 #define EWM_CMPH *(volatile uint8_t *)0x40061003 // Compare High Register
864 // Chapter 23: Watchdog Timer (WDOG)
865 #define WDOG_STCTRLH *(volatile uint16_t *)0x40052000 // Watchdog Status and Control Register High
866 #define WDOG_STCTRLH_DISTESTWDOG (uint16_t)0x4000 // Allows the WDOG's functional test mode to be disabled permanently.
867 #define WDOG_STCTRLH_BYTESEL(n) (uint16_t)(((n) & 3) << 12) // selects the byte to be tested when the watchdog is in the byte test mode.
868 #define WDOG_STCTRLH_TESTSEL (uint16_t)0x0800
869 #define WDOG_STCTRLH_TESTWDOG (uint16_t)0x0400
870 #define WDOG_STCTRLH_WAITEN (uint16_t)0x0080
871 #define WDOG_STCTRLH_STOPEN (uint16_t)0x0040
872 #define WDOG_STCTRLH_DBGEN (uint16_t)0x0020
873 #define WDOG_STCTRLH_ALLOWUPDATE (uint16_t)0x0010
874 #define WDOG_STCTRLH_WINEN (uint16_t)0x0008
875 #define WDOG_STCTRLH_IRQRSTEN (uint16_t)0x0004
876 #define WDOG_STCTRLH_CLKSRC (uint16_t)0x0002
877 #define WDOG_STCTRLH_WDOGEN (uint16_t)0x0001
878 #define WDOG_STCTRLL *(volatile uint16_t *)0x40052002 // Watchdog Status and Control Register Low
879 #define WDOG_TOVALH *(volatile uint16_t *)0x40052004 // Watchdog Time-out Value Register High
880 #define WDOG_TOVALL *(volatile uint16_t *)0x40052006 // Watchdog Time-out Value Register Low
881 #define WDOG_WINH *(volatile uint16_t *)0x40052008 // Watchdog Window Register High
882 #define WDOG_WINL *(volatile uint16_t *)0x4005200A // Watchdog Window Register Low
883 #define WDOG_REFRESH *(volatile uint16_t *)0x4005200C // Watchdog Refresh register
884 #define WDOG_UNLOCK *(volatile uint16_t *)0x4005200E // Watchdog Unlock register
885 #define WDOG_UNLOCK_SEQ1 (uint16_t)0xC520
886 #define WDOG_UNLOCK_SEQ2 (uint16_t)0xD928
887 #define WDOG_TMROUTH *(volatile uint16_t *)0x40052010 // Watchdog Timer Output Register High
888 #define WDOG_TMROUTL *(volatile uint16_t *)0x40052012 // Watchdog Timer Output Register Low
889 #define WDOG_RSTCNT *(volatile uint16_t *)0x40052014 // Watchdog Reset Count register
890 #define WDOG_PRESC *(volatile uint16_t *)0x40052016 // Watchdog Prescaler register
892 // Chapter 24: Multipurpose Clock Generator (MCG)
893 #define MCG_C1 *(volatile uint8_t *)0x40064000 // MCG Control 1 Register
894 #define MCG_C1_IREFSTEN (uint8_t)0x01 // Internal Reference Stop Enable, Controls whether or not the internal reference clock remains enabled when the MCG enters Stop mode.
895 #define MCG_C1_IRCLKEN (uint8_t)0x02 // Internal Reference Clock Enable, Enables the internal reference clock for use as MCGIRCLK.
896 #define MCG_C1_IREFS (uint8_t)0x04 // Internal Reference Select, Selects the reference clock source for the FLL.
897 #define MCG_C1_FRDIV(n) (uint8_t)(((n) & 0x07) << 3) // FLL External Reference Divider, Selects the amount to divide down the external reference clock for the FLL
898 #define MCG_C1_CLKS(n) (uint8_t)(((n) & 0x03) << 6) // Clock Source Select, Selects the clock source for MCGOUTCLK
899 #define MCG_C2 *(volatile uint8_t *)0x40064001 // MCG Control 2 Register
900 #define MCG_C2_IRCS (uint8_t)0x01 // Internal Reference Clock Select, Selects between the fast or slow internal reference clock source.
901 #define MCG_C2_LP (uint8_t)0x02 // Low Power Select, Controls whether the FLL or PLL is disabled in BLPI and BLPE modes.
902 #define MCG_C2_EREFS (uint8_t)0x04 // External Reference Select, Selects the source for the external reference clock.
903 #define MCG_C2_HGO0 (uint8_t)0x08 // High Gain Oscillator Select, Controls the crystal oscillator mode of operation
904 #define MCG_C2_RANGE0(n) (uint8_t)(((n) & 0x03) << 4) // Frequency Range Select, Selects the frequency range for the crystal oscillator
905 #define MCG_C2_LOCRE0 (uint8_t)0x80 // Loss of Clock Reset Enable, Determines whether an interrupt or a reset request is made following a loss of OSC0
906 #define MCG_C3 *(volatile uint8_t *)0x40064002 // MCG Control 3 Register
907 #define MCG_C3_SCTRIM(n) (uint8_t)(n) // Slow Internal Reference Clock Trim Setting
908 #define MCG_C4 *(volatile uint8_t *)0x40064003 // MCG Control 4 Register
909 #define MCG_C4_SCFTRIM (uint8_t)0x01 // Slow Internal Reference Clock Fine Trim
910 #define MCG_C4_FCTRIM(n) (uint8_t)(((n) & 0x0F) << 1) // Fast Internal Reference Clock Trim Setting
911 #define MCG_C4_DRST_DRS(n) (uint8_t)(((n) & 0x03) << 5) // DCO Range Select
912 #define MCG_C4_DMX32 (uint8_t)0x80 // DCO Maximum Frequency with 32.768 kHz Reference, controls whether the DCO frequency range is narrowed
913 #define MCG_C5 *(volatile uint8_t *)0x40064004 // MCG Control 5 Register
914 #define MCG_C5_PRDIV0(n) (uint8_t)((n) & 0x1F) // PLL External Reference Divider
915 #define MCG_C5_PLLSTEN0 (uint8_t)0x20 // PLL Stop Enable
916 #define MCG_C5_PLLCLKEN0 (uint8_t)0x40 // PLL Clock Enable
917 #define MCG_C6 *(volatile uint8_t *)0x40064005 // MCG Control 6 Register
918 #define MCG_C6_VDIV0(n) (uint8_t)((n) & 0x1F) // VCO 0 Divider
919 #define MCG_C6_CME0 (uint8_t)0x20 // Clock Monitor Enable
920 #define MCG_C6_PLLS (uint8_t)0x40 // PLL Select, Controls whether the PLL or FLL output is selected as the MCG source when CLKS[1:0]=00.
921 #define MCG_C6_LOLIE0 (uint8_t)0x80 // Loss of Lock Interrrupt Enable
922 #define MCG_S *(volatile uint8_t *)0x40064006 // MCG Status Register
923 #define MCG_S_IRCST (uint8_t)0x01 // Internal Reference Clock Status
924 #define MCG_S_OSCINIT0 (uint8_t)0x02 // OSC Initialization, resets to 0, is set to 1 after the initialization cycles of the crystal oscillator
925 #define MCG_S_CLKST(n) (uint8_t)(((n) & 0x03) << 2) // Clock Mode Status, 0=FLL is selected, 1= Internal ref, 2=External ref, 3=PLL
926 #define MCG_S_CLKST_MASK (uint8_t)0x0C
927 #define MCG_S_IREFST (uint8_t)0x10 // Internal Reference Status
928 #define MCG_S_PLLST (uint8_t)0x20 // PLL Select Status
929 #define MCG_S_LOCK0 (uint8_t)0x40 // Lock Status, 0=PLL Unlocked, 1=PLL Locked
930 #define MCG_S_LOLS0 (uint8_t)0x80 // Loss of Lock Status
931 #define MCG_SC *(volatile uint8_t *)0x40064008 // MCG Status and Control Register
932 #define MCG_SC_LOCS0 (uint8_t)0x01 // OSC0 Loss of Clock Status
933 #define MCG_SC_FCRDIV(n) (uint8_t)(((n) & 0x07) << 1) // Fast Clock Internal Reference Divider
934 #define MCG_SC_FLTPRSRV (uint8_t)0x10 // FLL Filter Preserve Enable
935 #define MCG_SC_ATMF (uint8_t)0x20 // Automatic Trim Machine Fail Flag
936 #define MCG_SC_ATMS (uint8_t)0x40 // Automatic Trim Machine Select
937 #define MCG_SC_ATME (uint8_t)0x80 // Automatic Trim Machine Enable
938 #define MCG_ATCVH *(volatile uint8_t *)0x4006400A // MCG Auto Trim Compare Value High Register
939 #define MCG_ATCVL *(volatile uint8_t *)0x4006400B // MCG Auto Trim Compare Value Low Register
940 #define MCG_C7 *(volatile uint8_t *)0x4006400C // MCG Control 7 Register
941 #define MCG_C8 *(volatile uint8_t *)0x4006400D // MCG Control 8 Register
943 // Chapter 25: Oscillator (OSC)
944 #define OSC0_CR *(volatile uint8_t *)0x40065000 // OSC Control Register
945 #define OSC_SC16P (uint8_t)0x01 // Oscillator 16 pF Capacitor Load Configure
946 #define OSC_SC8P (uint8_t)0x02 // Oscillator 8 pF Capacitor Load Configure
947 #define OSC_SC4P (uint8_t)0x04 // Oscillator 4 pF Capacitor Load Configure
948 #define OSC_SC2P (uint8_t)0x08 // Oscillator 2 pF Capacitor Load Configure
949 #define OSC_EREFSTEN (uint8_t)0x20 // External Reference Stop Enable, Controls whether or not the external reference clock (OSCERCLK) remains enabled when MCU enters Stop mode.
950 #define OSC_ERCLKEN (uint8_t)0x80 // External Reference Enable, Enables external reference clock (OSCERCLK).
952 // Chapter 27: Flash Memory Controller (FMC)
953 #define FMC_PFAPR *(volatile uint32_t *)0x4001F000 // Flash Access Protection
954 #define FMC_PFB0CR *(volatile uint32_t *)0x4001F004 // Flash Control
955 #define FMC_TAGVDW0S0 *(volatile uint32_t *)0x4001F100 // Cache Tag Storage
956 #define FMC_TAGVDW0S1 *(volatile uint32_t *)0x4001F104 // Cache Tag Storage
957 #define FMC_TAGVDW1S0 *(volatile uint32_t *)0x4001F108 // Cache Tag Storage
958 #define FMC_TAGVDW1S1 *(volatile uint32_t *)0x4001F10C // Cache Tag Storage
959 #define FMC_TAGVDW2S0 *(volatile uint32_t *)0x4001F110 // Cache Tag Storage
960 #define FMC_TAGVDW2S1 *(volatile uint32_t *)0x4001F114 // Cache Tag Storage
961 #define FMC_TAGVDW3S0 *(volatile uint32_t *)0x4001F118 // Cache Tag Storage
962 #define FMC_TAGVDW3S1 *(volatile uint32_t *)0x4001F11C // Cache Tag Storage
963 #define FMC_DATAW0S0 *(volatile uint32_t *)0x4001F200 // Cache Data Storage
964 #define FMC_DATAW0S1 *(volatile uint32_t *)0x4001F204 // Cache Data Storage
965 #define FMC_DATAW1S0 *(volatile uint32_t *)0x4001F208 // Cache Data Storage
966 #define FMC_DATAW1S1 *(volatile uint32_t *)0x4001F20C // Cache Data Storage
967 #define FMC_DATAW2S0 *(volatile uint32_t *)0x4001F210 // Cache Data Storage
968 #define FMC_DATAW2S1 *(volatile uint32_t *)0x4001F214 // Cache Data Storage
969 #define FMC_DATAW3S0 *(volatile uint32_t *)0x4001F218 // Cache Data Storage
970 #define FMC_DATAW3S1 *(volatile uint32_t *)0x4001F21C // Cache Data Storage
972 // Chapter 28: Flash Memory Module (FTFL)
973 #define FTFL_FSTAT *(volatile uint8_t *)0x40020000 // Flash Status Register
974 #define FTFL_FSTAT_CCIF (uint8_t)0x80 // Command Complete Interrupt Flag
975 #define FTFL_FSTAT_RDCOLERR (uint8_t)0x40 // Flash Read Collision Error Flag
976 #define FTFL_FSTAT_ACCERR (uint8_t)0x20 // Flash Access Error Flag
977 #define FTFL_FSTAT_FPVIOL (uint8_t)0x10 // Flash Protection Violation Flag
978 #define FTFL_FSTAT_MGSTAT0 (uint8_t)0x01 // Memory Controller Command Completion Status Flag
979 #define FTFL_FCNFG *(volatile uint8_t *)0x40020001 // Flash Configuration Register
980 #define FTFL_FCNFG_CCIE (uint8_t)0x80 // Command Complete Interrupt Enable
981 #define FTFL_FCNFG_RDCOLLIE (uint8_t)0x40 // Read Collision Error Interrupt Enable
982 #define FTFL_FCNFG_ERSAREQ (uint8_t)0x20 // Erase All Request
983 #define FTFL_FCNFG_ERSSUSP (uint8_t)0x10 // Erase Suspend
984 #define FTFL_FCNFG_PFLSH (uint8_t)0x04 // Flash memory configuration
985 #define FTFL_FCNFG_RAMRDY (uint8_t)0x02 // RAM Ready
986 #define FTFL_FCNFG_EEERDY (uint8_t)0x01 // EEPROM Ready
987 #define FTFL_FSEC *(const uint8_t *)0x40020002 // Flash Security Register
988 #define FTFL_FOPT *(const uint8_t *)0x40020003 // Flash Option Register
989 #define FTFL_FCCOB3 *(volatile uint8_t *)0x40020004 // Flash Common Command Object Registers
990 #define FTFL_FCCOB2 *(volatile uint8_t *)0x40020005
991 #define FTFL_FCCOB1 *(volatile uint8_t *)0x40020006
992 #define FTFL_FCCOB0 *(volatile uint8_t *)0x40020007
993 #define FTFL_FCCOB7 *(volatile uint8_t *)0x40020008
994 #define FTFL_FCCOB6 *(volatile uint8_t *)0x40020009
995 #define FTFL_FCCOB5 *(volatile uint8_t *)0x4002000A
996 #define FTFL_FCCOB4 *(volatile uint8_t *)0x4002000B
997 #define FTFL_FCCOBB *(volatile uint8_t *)0x4002000C
998 #define FTFL_FCCOBA *(volatile uint8_t *)0x4002000D
999 #define FTFL_FCCOB9 *(volatile uint8_t *)0x4002000E
1000 #define FTFL_FCCOB8 *(volatile uint8_t *)0x4002000F
1001 #define FTFL_FPROT3 *(volatile uint8_t *)0x40020010 // Program Flash Protection Registers
1002 #define FTFL_FPROT2 *(volatile uint8_t *)0x40020011 // Program Flash Protection Registers
1003 #define FTFL_FPROT1 *(volatile uint8_t *)0x40020012 // Program Flash Protection Registers
1004 #define FTFL_FPROT0 *(volatile uint8_t *)0x40020013 // Program Flash Protection Registers
1005 #define FTFL_FEPROT *(volatile uint8_t *)0x40020016 // EEPROM Protection Register
1006 #define FTFL_FDPROT *(volatile uint8_t *)0x40020017 // Data Flash Protection Register
1008 // Chapter 30: Cyclic Redundancy Check (CRC)
1009 #define CRC_CRC *(volatile uint32_t *)0x40032000 // CRC Data register
1010 #define CRC_GPOLY *(volatile uint32_t *)0x40032004 // CRC Polynomial register
1011 #define CRC_CTRL *(volatile uint32_t *)0x40032008 // CRC Control register
1013 // Chapter 31: Analog-to-Digital Converter (ADC)
1014 #define ADC0_SC1A *(volatile uint32_t *)0x4003B000 // ADC status and control registers 1
1015 #define ADC0_SC1B *(volatile uint32_t *)0x4003B004 // ADC status and control registers 1
1016 #define ADC_SC1_COCO (uint32_t)0x80 // Conversion complete flag
1017 #define ADC_SC1_AIEN (uint32_t)0x40 // Interrupt enable
1018 #define ADC_SC1_DIFF (uint32_t)0x20 // Differential mode enable
1019 #define ADC_SC1_ADCH(n) (uint32_t)((n) & 0x1F) // Input channel select
1020 #define ADC0_CFG1 *(volatile uint32_t *)0x4003B008 // ADC configuration register 1
1021 #define ADC_CFG1_ADLPC (uint32_t)0x80 // Low-power configuration
1022 #define ADC_CFG1_ADIV(n) (uint32_t)(((n) & 3) << 5) // Clock divide select, 0=direct, 1=div2, 2=div4, 3=div8
1023 #define ADC_CFG1_ADLSMP (uint32_t)0x10 // Sample time configuration, 0=Short, 1=Long
1024 #define ADC_CFG1_MODE(n) (uint32_t)(((n) & 3) << 2) // Conversion mode, 0=8 bit, 1=12 bit, 2=10 bit, 3=16 bit
1025 #define ADC_CFG1_ADICLK(n) (uint32_t)(((n) & 3) << 0) // Input clock, 0=bus, 1=bus/2, 2=OSCERCLK, 3=async
1026 #define ADC0_CFG2 *(volatile uint32_t *)0x4003B00C // Configuration register 2
1027 #define ADC_CFG2_MUXSEL (uint32_t)0x10 // 0=a channels, 1=b channels
1028 #define ADC_CFG2_ADACKEN (uint32_t)0x08 // async clock enable
1029 #define ADC_CFG2_ADHSC (uint32_t)0x04 // High speed configuration
1030 #define ADC_CFG2_ADLSTS(n) (uint32_t)(((n) & 3) << 0) // Sample time, 0=24 cycles, 1=12 cycles, 2=6 cycles, 3=2 cycles
1031 #define ADC0_RA *(volatile uint32_t *)0x4003B010 // ADC data result register
1032 #define ADC0_RB *(volatile uint32_t *)0x4003B014 // ADC data result register
1033 #define ADC0_CV1 *(volatile uint32_t *)0x4003B018 // Compare value registers
1034 #define ADC0_CV2 *(volatile uint32_t *)0x4003B01C // Compare value registers
1035 #define ADC0_SC2 *(volatile uint32_t *)0x4003B020 // Status and control register 2
1036 #define ADC_SC2_ADACT (uint32_t)0x80 // Conversion active
1037 #define ADC_SC2_ADTRG (uint32_t)0x40 // Conversion trigger select, 0=software, 1=hardware
1038 #define ADC_SC2_ACFE (uint32_t)0x20 // Compare function enable
1039 #define ADC_SC2_ACFGT (uint32_t)0x10 // Compare function greater than enable
1040 #define ADC_SC2_ACREN (uint32_t)0x08 // Compare function range enable
1041 #define ADC_SC2_DMAEN (uint32_t)0x04 // DMA enable
1042 #define ADC_SC2_REFSEL(n) (uint32_t)(((n) & 3) << 0) // Voltage reference, 0=vcc/external, 1=1.2 volts
1043 #define ADC0_SC3 *(volatile uint32_t *)0x4003B024 // Status and control register 3
1044 #define ADC_SC3_CAL (uint32_t)0x80 // Calibration, 1=begin, stays set while cal in progress
1045 #define ADC_SC3_CALF (uint32_t)0x40 // Calibration failed flag
1046 #define ADC_SC3_ADCO (uint32_t)0x08 // Continuous conversion enable
1047 #define ADC_SC3_AVGE (uint32_t)0x04 // Hardware average enable
1048 #define ADC_SC3_AVGS(n) (uint32_t)(((n) & 3) << 0) // avg select, 0=4 samples, 1=8 samples, 2=16 samples, 3=32 samples
1049 #define ADC0_OFS *(volatile uint32_t *)0x4003B028 // ADC offset correction register
1050 #define ADC0_PG *(volatile uint32_t *)0x4003B02C // ADC plus-side gain register
1051 #define ADC0_MG *(volatile uint32_t *)0x4003B030 // ADC minus-side gain register
1052 #define ADC0_CLPD *(volatile uint32_t *)0x4003B034 // ADC plus-side general calibration value register
1053 #define ADC0_CLPS *(volatile uint32_t *)0x4003B038 // ADC plus-side general calibration value register
1054 #define ADC0_CLP4 *(volatile uint32_t *)0x4003B03C // ADC plus-side general calibration value register
1055 #define ADC0_CLP3 *(volatile uint32_t *)0x4003B040 // ADC plus-side general calibration value register
1056 #define ADC0_CLP2 *(volatile uint32_t *)0x4003B044 // ADC plus-side general calibration value register
1057 #define ADC0_CLP1 *(volatile uint32_t *)0x4003B048 // ADC plus-side general calibration value register
1058 #define ADC0_CLP0 *(volatile uint32_t *)0x4003B04C // ADC plus-side general calibration value register
1059 #define ADC0_PGA *(volatile uint32_t *)0x4003B050 // ADC Programmable Gain Amplifier
1060 #define ADC0_PGA_PGAEN (uint32_t)0x00800000 // Enable
1061 #define ADC0_PGA_PGALPB (uint32_t)0x00100000 // Low-Power Mode Control, 0=low power, 1=normal
1062 #define ADC0_PGA_PGAG(n) (uint32_t)(((n) & 15) << 16) // Gain, 0=1X, 1=2X, 2=4X, 3=8X, 4=16X, 5=32X, 6=64X
1063 #define ADC0_CLMD *(volatile uint32_t *)0x4003B054 // ADC minus-side general calibration value register
1064 #define ADC0_CLMS *(volatile uint32_t *)0x4003B058 // ADC minus-side general calibration value register
1065 #define ADC0_CLM4 *(volatile uint32_t *)0x4003B05C // ADC minus-side general calibration value register
1066 #define ADC0_CLM3 *(volatile uint32_t *)0x4003B060 // ADC minus-side general calibration value register
1067 #define ADC0_CLM2 *(volatile uint32_t *)0x4003B064 // ADC minus-side general calibration value register
1068 #define ADC0_CLM1 *(volatile uint32_t *)0x4003B068 // ADC minus-side general calibration value register
1069 #define ADC0_CLM0 *(volatile uint32_t *)0x4003B06C // ADC minus-side general calibration value register
1071 #define ADC1_SC1A *(volatile uint32_t *)0x400BB000 // ADC status and control registers 1
1072 #define ADC1_SC1B *(volatile uint32_t *)0x400BB004 // ADC status and control registers 1
1073 #define ADC1_CFG1 *(volatile uint32_t *)0x400BB008 // ADC configuration register 1
1074 #define ADC1_CFG2 *(volatile uint32_t *)0x400BB00C // Configuration register 2
1075 #define ADC1_RA *(volatile uint32_t *)0x400BB010 // ADC data result register
1076 #define ADC1_RB *(volatile uint32_t *)0x400BB014 // ADC data result register
1077 #define ADC1_CV1 *(volatile uint32_t *)0x400BB018 // Compare value registers
1078 #define ADC1_CV2 *(volatile uint32_t *)0x400BB01C // Compare value registers
1079 #define ADC1_SC2 *(volatile uint32_t *)0x400BB020 // Status and control register 2
1080 #define ADC1_SC3 *(volatile uint32_t *)0x400BB024 // Status and control register 3
1081 #define ADC1_OFS *(volatile uint32_t *)0x400BB028 // ADC offset correction register
1082 #define ADC1_PG *(volatile uint32_t *)0x400BB02C // ADC plus-side gain register
1083 #define ADC1_MG *(volatile uint32_t *)0x400BB030 // ADC minus-side gain register
1084 #define ADC1_CLPD *(volatile uint32_t *)0x400BB034 // ADC plus-side general calibration value register
1085 #define ADC1_CLPS *(volatile uint32_t *)0x400BB038 // ADC plus-side general calibration value register
1086 #define ADC1_CLP4 *(volatile uint32_t *)0x400BB03C // ADC plus-side general calibration value register
1087 #define ADC1_CLP3 *(volatile uint32_t *)0x400BB040 // ADC plus-side general calibration value register
1088 #define ADC1_CLP2 *(volatile uint32_t *)0x400BB044 // ADC plus-side general calibration value register
1089 #define ADC1_CLP1 *(volatile uint32_t *)0x400BB048 // ADC plus-side general calibration value register
1090 #define ADC1_CLP0 *(volatile uint32_t *)0x400BB04C // ADC plus-side general calibration value register
1091 #define ADC1_PGA *(volatile uint32_t *)0x400BB050 // ADC Programmable Gain Amplifier
1092 #define ADC1_CLMD *(volatile uint32_t *)0x400BB054 // ADC minus-side general calibration value register
1093 #define ADC1_CLMS *(volatile uint32_t *)0x400BB058 // ADC minus-side general calibration value register
1094 #define ADC1_CLM4 *(volatile uint32_t *)0x400BB05C // ADC minus-side general calibration value register
1095 #define ADC1_CLM3 *(volatile uint32_t *)0x400BB060 // ADC minus-side general calibration value register
1096 #define ADC1_CLM2 *(volatile uint32_t *)0x400BB064 // ADC minus-side general calibration value register
1097 #define ADC1_CLM1 *(volatile uint32_t *)0x400BB068 // ADC minus-side general calibration value register
1098 #define ADC1_CLM0 *(volatile uint32_t *)0x400BB06C // ADC minus-side general calibration value register
1100 #define DAC0_DAT0L *(volatile uint8_t *)0x400CC000 // DAC Data Low Register
1101 #define DAC0_DATH *(volatile uint8_t *)0x400CC001 // DAC Data High Register
1102 #define DAC0_DAT1L *(volatile uint8_t *)0x400CC002 // DAC Data Low Register
1103 #define DAC0_DAT2L *(volatile uint8_t *)0x400CC004 // DAC Data Low Register
1104 #define DAC0_DAT3L *(volatile uint8_t *)0x400CC006 // DAC Data Low Register
1105 #define DAC0_DAT4L *(volatile uint8_t *)0x400CC008 // DAC Data Low Register
1106 #define DAC0_DAT5L *(volatile uint8_t *)0x400CC00A // DAC Data Low Register
1107 #define DAC0_DAT6L *(volatile uint8_t *)0x400CC00C // DAC Data Low Register
1108 #define DAC0_DAT7L *(volatile uint8_t *)0x400CC00E // DAC Data Low Register
1109 #define DAC0_DAT8L *(volatile uint8_t *)0x400CC010 // DAC Data Low Register
1110 #define DAC0_DAT9L *(volatile uint8_t *)0x400CC012 // DAC Data Low Register
1111 #define DAC0_DAT10L *(volatile uint8_t *)0x400CC014 // DAC Data Low Register
1112 #define DAC0_DAT11L *(volatile uint8_t *)0x400CC016 // DAC Data Low Register
1113 #define DAC0_DAT12L *(volatile uint8_t *)0x400CC018 // DAC Data Low Register
1114 #define DAC0_DAT13L *(volatile uint8_t *)0x400CC01A // DAC Data Low Register
1115 #define DAC0_DAT14L *(volatile uint8_t *)0x400CC01C // DAC Data Low Register
1116 #define DAC0_DAT15L *(volatile uint8_t *)0x400CC01E // DAC Data Low Register
1117 #define DAC0_SR *(volatile uint8_t *)0x400CC020 // DAC Status Register
1118 #define DAC0_C0 *(volatile uint8_t *)0x400CC021 // DAC Control Register
1119 #define DAC_C0_DACEN 0x80 // DAC Enable
1120 #define DAC_C0_DACRFS 0x40 // DAC Reference Select
1121 #define DAC_C0_DACTRGSEL 0x20 // DAC Trigger Select
1122 #define DAC_C0_DACSWTRG 0x10 // DAC Software Trigger
1123 #define DAC_C0_LPEN 0x08 // DAC Low Power Control
1124 #define DAC_C0_DACBWIEN 0x04 // DAC Buffer Watermark Interrupt Enable
1125 #define DAC_C0_DACBTIEN 0x02 // DAC Buffer Read Pointer Top Flag Interrupt Enable
1126 #define DAC_C0_DACBBIEN 0x01 // DAC Buffer Read Pointer Bottom Flag Interrupt Enable
1127 #define DAC0_C1 *(volatile uint8_t *)0x400CC022 // DAC Control Register 1
1128 #define DAC_C1_DMAEN 0x80 // DMA Enable Select
1129 #define DAC_C1_DACBFWM(n) (((n) & 3) << 3) // DAC Buffer Watermark Select
1130 #define DAC_C1_DACBFMD(n) (((n) & 3) << 0) // DAC Buffer Work Mode Select
1131 #define DAC_C1_DACBFEN 0x00 // DAC Buffer Enable
1133 #define DAC0_C2 *(volatile uint8_t *)0x400CC023 // DAC Control Register 2
1134 #define DAC_C2_DACBFRP(n) (((n) & 15) << 4) // DAC Buffer Read Pointer
1135 #define DAC_C2_DACBFUP(n) (((n) & 15) << 0) // DAC Buffer Upper Limit
1138 //#define MCG_C2_RANGE0(n) (uint8_t)(((n) & 0x03) << 4) // Frequency Range Select, Selects the frequency range for the crystal oscillator
1139 //#define MCG_C2_LOCRE0 (uint8_t)0x80 // Loss of Clock Reset Enable, Determines whether an interrupt or a reset request is made following a loss of OSC0
1141 // Chapter 32: Comparator (CMP)
1142 #define CMP0_CR0 *(volatile uint8_t *)0x40073000 // CMP Control Register 0
1143 #define CMP0_CR1 *(volatile uint8_t *)0x40073001 // CMP Control Register 1
1144 #define CMP0_FPR *(volatile uint8_t *)0x40073002 // CMP Filter Period Register
1145 #define CMP0_SCR *(volatile uint8_t *)0x40073003 // CMP Status and Control Register
1146 #define CMP0_DACCR *(volatile uint8_t *)0x40073004 // DAC Control Register
1147 #define CMP0_MUXCR *(volatile uint8_t *)0x40073005 // MUX Control Register
1148 #define CMP1_CR0 *(volatile uint8_t *)0x40073008 // CMP Control Register 0
1149 #define CMP1_CR1 *(volatile uint8_t *)0x40073009 // CMP Control Register 1
1150 #define CMP1_FPR *(volatile uint8_t *)0x4007300A // CMP Filter Period Register
1151 #define CMP1_SCR *(volatile uint8_t *)0x4007300B // CMP Status and Control Register
1152 #define CMP1_DACCR *(volatile uint8_t *)0x4007300C // DAC Control Register
1153 #define CMP1_MUXCR *(volatile uint8_t *)0x4007300D // MUX Control Register
1155 // Chapter 33: Voltage Reference (VREFV1)
1156 #define VREF_TRM *(volatile uint8_t *)0x40074000 // VREF Trim Register
1157 #define VREF_SC *(volatile uint8_t *)0x40074001 // VREF Status and Control Register
1159 // Chapter 34: Programmable Delay Block (PDB)
1160 #define PDB0_SC *(volatile uint32_t *)0x40036000 // Status and Control Register
1161 #define PDB_SC_LDMOD(n) (((n) & 3) << 18) // Load Mode Select
1162 #define PDB_SC_PDBEIE 0x00020000 // Sequence Error Interrupt Enable
1163 #define PDB_SC_SWTRIG 0x00010000 // Software Trigger
1164 #define PDB_SC_DMAEN 0x00008000 // DMA Enable
1165 #define PDB_SC_PRESCALER(n) (((n) & 7) << 12) // Prescaler Divider Select
1166 #define PDB_SC_TRGSEL(n) (((n) & 15) << 8) // Trigger Input Source Select
1167 #define PDB_SC_PDBEN 0x00000080 // PDB Enable
1168 #define PDB_SC_PDBIF 0x00000040 // PDB Interrupt Flag
1169 #define PDB_SC_PDBIE 0x00000020 // PDB Interrupt Enable.
1170 #define PDB_SC_MULT(n) (((n) & 3) << 2) // Multiplication Factor
1171 #define PDB_SC_CONT 0x00000002 // Continuous Mode Enable
1172 #define PDB_SC_LDOK 0x00000001 // Load OK
1173 #define PDB0_MOD *(volatile uint32_t *)0x40036004 // Modulus Register
1174 #define PDB0_CNT *(volatile uint32_t *)0x40036008 // Counter Register
1175 #define PDB0_IDLY *(volatile uint32_t *)0x4003600C // Interrupt Delay Register
1176 #define PDB0_CH0C1 *(volatile uint32_t *)0x40036010 // Channel n Control Register 1
1177 #define PDB0_CH0S *(volatile uint32_t *)0x40036014 // Channel n Status Register
1178 #define PDB0_CH0DLY0 *(volatile uint32_t *)0x40036018 // Channel n Delay 0 Register
1179 #define PDB0_CH0DLY1 *(volatile uint32_t *)0x4003601C // Channel n Delay 1 Register
1180 #define PDB0_POEN *(volatile uint32_t *)0x40036190 // Pulse-Out n Enable Register
1181 #define PDB0_PO0DLY *(volatile uint32_t *)0x40036194 // Pulse-Out n Delay Register
1182 #define PDB0_PO1DLY *(volatile uint32_t *)0x40036198 // Pulse-Out n Delay Register
1184 // Chapter 35: FlexTimer Module (FTM)
1185 #define FTM0_SC *(volatile uint32_t *)0x40038000 // Status And Control
1186 #define FTM_SC_TOF 0x80 // Timer Overflow Flag
1187 #define FTM_SC_TOIE 0x40 // Timer Overflow Interrupt Enable
1188 #define FTM_SC_CPWMS 0x20 // Center-Aligned PWM Select
1189 #define FTM_SC_CLKS(n) (((n) & 3) << 3) // Clock Source Selection
1190 #define FTM_SC_PS(n) (((n) & 7) << 0) // Prescale Factor Selection
1191 #define FTM0_CNT *(volatile uint32_t *)0x40038004 // Counter
1192 #define FTM0_MOD *(volatile uint32_t *)0x40038008 // Modulo
1193 #define FTM0_C0SC *(volatile uint32_t *)0x4003800C // Channel 0 Status And Control
1194 #define FTM0_C0V *(volatile uint32_t *)0x40038010 // Channel 0 Value
1195 #define FTM0_C1SC *(volatile uint32_t *)0x40038014 // Channel 1 Status And Control
1196 #define FTM0_C1V *(volatile uint32_t *)0x40038018 // Channel 1 Value
1197 #define FTM0_C2SC *(volatile uint32_t *)0x4003801C // Channel 2 Status And Control
1198 #define FTM0_C2V *(volatile uint32_t *)0x40038020 // Channel 2 Value
1199 #define FTM0_C3SC *(volatile uint32_t *)0x40038024 // Channel 3 Status And Control
1200 #define FTM0_C3V *(volatile uint32_t *)0x40038028 // Channel 3 Value
1201 #define FTM0_C4SC *(volatile uint32_t *)0x4003802C // Channel 4 Status And Control
1202 #define FTM0_C4V *(volatile uint32_t *)0x40038030 // Channel 4 Value
1203 #define FTM0_C5SC *(volatile uint32_t *)0x40038034 // Channel 5 Status And Control
1204 #define FTM0_C5V *(volatile uint32_t *)0x40038038 // Channel 5 Value
1205 #define FTM0_C6SC *(volatile uint32_t *)0x4003803C // Channel 6 Status And Control
1206 #define FTM0_C6V *(volatile uint32_t *)0x40038040 // Channel 6 Value
1207 #define FTM0_C7SC *(volatile uint32_t *)0x40038044 // Channel 7 Status And Control
1208 #define FTM0_C7V *(volatile uint32_t *)0x40038048 // Channel 7 Value
1209 #define FTM0_CNTIN *(volatile uint32_t *)0x4003804C // Counter Initial Value
1210 #define FTM0_STATUS *(volatile uint32_t *)0x40038050 // Capture And Compare Status
1211 #define FTM0_MODE *(volatile uint32_t *)0x40038054 // Features Mode Selection
1212 #define FTM_MODE_FAULTIE 0x80 // Fault Interrupt Enable
1213 #define FTM_MODE_FAULTM(n) (((n) & 3) << 5) // Fault Control Mode
1214 #define FTM_MODE_CAPTEST 0x10 // Capture Test Mode Enable
1215 #define FTM_MODE_PWMSYNC 0x08 // PWM Synchronization Mode
1216 #define FTM_MODE_WPDIS 0x04 // Write Protection Disable
1217 #define FTM_MODE_INIT 0x02 // Initialize The Channels Output
1218 #define FTM_MODE_FTMEN 0x01 // FTM Enable
1219 #define FTM0_SYNC *(volatile uint32_t *)0x40038058 // Synchronization
1220 #define FTM_SYNC_SWSYNC 0x80 //
1221 #define FTM_SYNC_TRIG2 0x40 //
1222 #define FTM_SYNC_TRIG1 0x20 //
1223 #define FTM_SYNC_TRIG0 0x10 //
1224 #define FTM_SYNC_SYNCHOM 0x08 //
1225 #define FTM_SYNC_REINIT 0x04 //
1226 #define FTM_SYNC_CNTMAX 0x02 //
1227 #define FTM_SYNC_CNTMIN 0x01 //
1228 #define FTM0_OUTINIT *(volatile uint32_t *)0x4003805C // Initial State For Channels Output
1229 #define FTM0_OUTMASK *(volatile uint32_t *)0x40038060 // Output Mask
1230 #define FTM0_COMBINE *(volatile uint32_t *)0x40038064 // Function For Linked Channels
1231 #define FTM0_DEADTIME *(volatile uint32_t *)0x40038068 // Deadtime Insertion Control
1232 #define FTM0_EXTTRIG *(volatile uint32_t *)0x4003806C // FTM External Trigger
1233 #define FTM0_POL *(volatile uint32_t *)0x40038070 // Channels Polarity
1234 #define FTM0_FMS *(volatile uint32_t *)0x40038074 // Fault Mode Status
1235 #define FTM0_FILTER *(volatile uint32_t *)0x40038078 // Input Capture Filter Control
1236 #define FTM0_FLTCTRL *(volatile uint32_t *)0x4003807C // Fault Control
1237 #define FTM0_QDCTRL *(volatile uint32_t *)0x40038080 // Quadrature Decoder Control And Status
1238 #define FTM0_CONF *(volatile uint32_t *)0x40038084 // Configuration
1239 #define FTM0_FLTPOL *(volatile uint32_t *)0x40038088 // FTM Fault Input Polarity
1240 #define FTM0_SYNCONF *(volatile uint32_t *)0x4003808C // Synchronization Configuration
1241 #define FTM0_INVCTRL *(volatile uint32_t *)0x40038090 // FTM Inverting Control
1242 #define FTM0_SWOCTRL *(volatile uint32_t *)0x40038094 // FTM Software Output Control
1243 #define FTM0_PWMLOAD *(volatile uint32_t *)0x40038098 // FTM PWM Load
1244 #define FTM1_SC *(volatile uint32_t *)0x40039000 // Status And Control
1245 #define FTM1_CNT *(volatile uint32_t *)0x40039004 // Counter
1246 #define FTM1_MOD *(volatile uint32_t *)0x40039008 // Modulo
1247 #define FTM1_C0SC *(volatile uint32_t *)0x4003900C // Channel 0 Status And Control
1248 #define FTM1_C0V *(volatile uint32_t *)0x40039010 // Channel 0 Value
1249 #define FTM1_C1SC *(volatile uint32_t *)0x40039014 // Channel 1 Status And Control
1250 #define FTM1_C1V *(volatile uint32_t *)0x40039018 // Channel 1 Value
1251 #define FTM1_CNTIN *(volatile uint32_t *)0x4003904C // Counter Initial Value
1252 #define FTM1_STATUS *(volatile uint32_t *)0x40039050 // Capture And Compare Status
1253 #define FTM1_MODE *(volatile uint32_t *)0x40039054 // Features Mode Selection
1254 #define FTM1_SYNC *(volatile uint32_t *)0x40039058 // Synchronization
1255 #define FTM1_OUTINIT *(volatile uint32_t *)0x4003905C // Initial State For Channels Output
1256 #define FTM1_OUTMASK *(volatile uint32_t *)0x40039060 // Output Mask
1257 #define FTM1_COMBINE *(volatile uint32_t *)0x40039064 // Function For Linked Channels
1258 #define FTM1_DEADTIME *(volatile uint32_t *)0x40039068 // Deadtime Insertion Control
1259 #define FTM1_EXTTRIG *(volatile uint32_t *)0x4003906C // FTM External Trigger
1260 #define FTM1_POL *(volatile uint32_t *)0x40039070 // Channels Polarity
1261 #define FTM1_FMS *(volatile uint32_t *)0x40039074 // Fault Mode Status
1262 #define FTM1_FILTER *(volatile uint32_t *)0x40039078 // Input Capture Filter Control
1263 #define FTM1_FLTCTRL *(volatile uint32_t *)0x4003907C // Fault Control
1264 #define FTM1_QDCTRL *(volatile uint32_t *)0x40039080 // Quadrature Decoder Control And Status
1265 #define FTM1_CONF *(volatile uint32_t *)0x40039084 // Configuration
1266 #define FTM1_FLTPOL *(volatile uint32_t *)0x40039088 // FTM Fault Input Polarity
1267 #define FTM1_SYNCONF *(volatile uint32_t *)0x4003908C // Synchronization Configuration
1268 #define FTM1_INVCTRL *(volatile uint32_t *)0x40039090 // FTM Inverting Control
1269 #define FTM1_SWOCTRL *(volatile uint32_t *)0x40039094 // FTM Software Output Control
1270 #define FTM1_PWMLOAD *(volatile uint32_t *)0x40039098 // FTM PWM Load
1271 #define FTM2_SC *(volatile uint32_t *)0x400B8000 // Status And Control
1272 #define FTM2_CNT *(volatile uint32_t *)0x400B8004 // Counter
1273 #define FTM2_MOD *(volatile uint32_t *)0x400B8008 // Modulo
1274 #define FTM2_C0SC *(volatile uint32_t *)0x400B800C // Channel 0 Status And Control
1275 #define FTM2_C0V *(volatile uint32_t *)0x400B8010 // Channel 0 Value
1276 #define FTM2_C1SC *(volatile uint32_t *)0x400B8014 // Channel 1 Status And Control
1277 #define FTM2_C1V *(volatile uint32_t *)0x400B8018 // Channel 1 Value
1278 #define FTM2_CNTIN *(volatile uint32_t *)0x400B804C // Counter Initial Value
1279 #define FTM2_STATUS *(volatile uint32_t *)0x400B8050 // Capture And Compare Status
1280 #define FTM2_MODE *(volatile uint32_t *)0x400B8054 // Features Mode Selection
1281 #define FTM2_SYNC *(volatile uint32_t *)0x400B8058 // Synchronization
1282 #define FTM2_OUTINIT *(volatile uint32_t *)0x400B805C // Initial State For Channels Output
1283 #define FTM2_OUTMASK *(volatile uint32_t *)0x400B8060 // Output Mask
1284 #define FTM2_COMBINE *(volatile uint32_t *)0x400B8064 // Function For Linked Channels
1285 #define FTM2_DEADTIME *(volatile uint32_t *)0x400B8068 // Deadtime Insertion Control
1286 #define FTM2_EXTTRIG *(volatile uint32_t *)0x400B806C // FTM External Trigger
1287 #define FTM2_POL *(volatile uint32_t *)0x400B8070 // Channels Polarity
1288 #define FTM2_FMS *(volatile uint32_t *)0x400B8074 // Fault Mode Status
1289 #define FTM2_FILTER *(volatile uint32_t *)0x400B8078 // Input Capture Filter Control
1290 #define FTM2_FLTCTRL *(volatile uint32_t *)0x400B807C // Fault Control
1291 #define FTM2_QDCTRL *(volatile uint32_t *)0x400B8080 // Quadrature Decoder Control And Status
1292 #define FTM2_CONF *(volatile uint32_t *)0x400B8084 // Configuration
1293 #define FTM2_FLTPOL *(volatile uint32_t *)0x400B8088 // FTM Fault Input Polarity
1294 #define FTM2_SYNCONF *(volatile uint32_t *)0x400B808C // Synchronization Configuration
1295 #define FTM2_INVCTRL *(volatile uint32_t *)0x400B8090 // FTM Inverting Control
1296 #define FTM2_SWOCTRL *(volatile uint32_t *)0x400B8094 // FTM Software Output Control
1297 #define FTM2_PWMLOAD *(volatile uint32_t *)0x400B8098 // FTM PWM Load
1299 // Chapter 36: Periodic Interrupt Timer (PIT)
1300 #define PIT_MCR *(volatile uint32_t *)0x40037000 // PIT Module Control Register
1301 #define PIT_LDVAL0 *(volatile uint32_t *)0x40037100 // Timer Load Value Register
1302 #define PIT_CVAL0 *(volatile uint32_t *)0x40037104 // Current Timer Value Register
1303 #define PIT_TCTRL0 *(volatile uint32_t *)0x40037108 // Timer Control Register
1304 #define PIT_TFLG0 *(volatile uint32_t *)0x4003710C // Timer Flag Register
1305 #define PIT_LDVAL1 *(volatile uint32_t *)0x40037110 // Timer Load Value Register
1306 #define PIT_CVAL1 *(volatile uint32_t *)0x40037114 // Current Timer Value Register
1307 #define PIT_TCTRL1 *(volatile uint32_t *)0x40037118 // Timer Control Register
1308 #define PIT_TFLG1 *(volatile uint32_t *)0x4003711C // Timer Flag Register
1309 #define PIT_LDVAL2 *(volatile uint32_t *)0x40037120 // Timer Load Value Register
1310 #define PIT_CVAL2 *(volatile uint32_t *)0x40037124 // Current Timer Value Register
1311 #define PIT_TCTRL2 *(volatile uint32_t *)0x40037128 // Timer Control Register
1312 #define PIT_TFLG2 *(volatile uint32_t *)0x4003712C // Timer Flag Register
1313 #define PIT_LDVAL3 *(volatile uint32_t *)0x40037130 // Timer Load Value Register
1314 #define PIT_CVAL3 *(volatile uint32_t *)0x40037134 // Current Timer Value Register
1315 #define PIT_TCTRL3 *(volatile uint32_t *)0x40037138 // Timer Control Register
1316 #define PIT_TFLG3 *(volatile uint32_t *)0x4003713C // Timer Flag Register
1318 // Chapter 37: Low-Power Timer (LPTMR)
1319 #define LPTMR0_CSR *(volatile uint32_t *)0x40040000 // Low Power Timer Control Status Register
1320 #define LPTMR0_PSR *(volatile uint32_t *)0x40040004 // Low Power Timer Prescale Register
1321 #define LPTMR0_CMR *(volatile uint32_t *)0x40040008 // Low Power Timer Compare Register
1322 #define LPTMR0_CNR *(volatile uint32_t *)0x4004000C // Low Power Timer Counter Register
1324 // Chapter 38: Carrier Modulator Transmitter (CMT)
1325 #define CMT_CGH1 *(volatile uint8_t *)0x40062000 // CMT Carrier Generator High Data Register 1
1326 #define CMT_CGL1 *(volatile uint8_t *)0x40062001 // CMT Carrier Generator Low Data Register 1
1327 #define CMT_CGH2 *(volatile uint8_t *)0x40062002 // CMT Carrier Generator High Data Register 2
1328 #define CMT_CGL2 *(volatile uint8_t *)0x40062003 // CMT Carrier Generator Low Data Register 2
1329 #define CMT_OC *(volatile uint8_t *)0x40062004 // CMT Output Control Register
1330 #define CMT_MSC *(volatile uint8_t *)0x40062005 // CMT Modulator Status and Control Register
1331 #define CMT_CMD1 *(volatile uint8_t *)0x40062006 // CMT Modulator Data Register Mark High
1332 #define CMT_CMD2 *(volatile uint8_t *)0x40062007 // CMT Modulator Data Register Mark Low
1333 #define CMT_CMD3 *(volatile uint8_t *)0x40062008 // CMT Modulator Data Register Space High
1334 #define CMT_CMD4 *(volatile uint8_t *)0x40062009 // CMT Modulator Data Register Space Low
1335 #define CMT_PPS *(volatile uint8_t *)0x4006200A // CMT Primary Prescaler Register
1336 #define CMT_DMA *(volatile uint8_t *)0x4006200B // CMT Direct Memory Access Register
1338 // Chapter 39: Real Time Clock (RTC)
1339 #define RTC_TSR *(volatile uint32_t *)0x4003D000 // RTC Time Seconds Register
1340 #define RTC_TPR *(volatile uint32_t *)0x4003D004 // RTC Time Prescaler Register
1341 #define RTC_TAR *(volatile uint32_t *)0x4003D008 // RTC Time Alarm Register
1342 #define RTC_TCR *(volatile uint32_t *)0x4003D00C // RTC Time Compensation Register
1343 #define RTC_TCR_CIC(n) (((n) & 255) << 24) // Compensation Interval Counter
1344 #define RTC_TCR_TCV(n) (((n) & 255) << 16) // Time Compensation Value
1345 #define RTC_TCR_CIR(n) (((n) & 255) << 8) // Compensation Interval Register
1346 #define RTC_TCR_TCR(n) (((n) & 255) << 0) // Time Compensation Register
1347 #define RTC_CR *(volatile uint32_t *)0x4003D010 // RTC Control Register
1348 #define RTC_CR_SC2P (uint32_t)0x00002000 //
1349 #define RTC_CR_SC4P (uint32_t)0x00001000 //
1350 #define RTC_CR_SC8P (uint32_t)0x00000800 //
1351 #define RTC_CR_SC16P (uint32_t)0x00000400 //
1352 #define RTC_CR_CLKO (uint32_t)0x00000200 //
1353 #define RTC_CR_OSCE (uint32_t)0x00000100 //
1354 #define RTC_CR_UM (uint32_t)0x00000008 //
1355 #define RTC_CR_SUP (uint32_t)0x00000004 //
1356 #define RTC_CR_WPE (uint32_t)0x00000002 //
1357 #define RTC_CR_SWR (uint32_t)0x00000001 //
1358 #define RTC_SR *(volatile uint32_t *)0x4003D014 // RTC Status Register
1359 #define RTC_SR_TCE (uint32_t)0x00000010 //
1360 #define RTC_SR_TAF (uint32_t)0x00000004 //
1361 #define RTC_SR_TOF (uint32_t)0x00000002 //
1362 #define RTC_SR_TIF (uint32_t)0x00000001 //
1363 #define RTC_LR *(volatile uint32_t *)0x4003D018 // RTC Lock Register
1364 #define RTC_IER *(volatile uint32_t *)0x4003D01C // RTC Interrupt Enable Register
1365 #define RTC_WAR *(volatile uint32_t *)0x4003D800 // RTC Write Access Register
1366 #define RTC_RAR *(volatile uint32_t *)0x4003D804 // RTC Read Access Register
1368 // Chapter 40: Universal Serial Bus OTG Controller (USBOTG)
1369 #define USB0_PERID *(const uint8_t *)0x40072000 // Peripheral ID register
1370 #define USB0_IDCOMP *(const uint8_t *)0x40072004 // Peripheral ID Complement register
1371 #define USB0_REV *(const uint8_t *)0x40072008 // Peripheral Revision register
1372 #define USB0_ADDINFO *(volatile uint8_t *)0x4007200C // Peripheral Additional Info register
1373 #define USB0_OTGISTAT *(volatile uint8_t *)0x40072010 // OTG Interrupt Status register
1374 #define USB_OTGISTAT_IDCHG (uint8_t)0x80 //
1375 #define USB_OTGISTAT_ONEMSEC (uint8_t)0x40 //
1376 #define USB_OTGISTAT_LINE_STATE_CHG (uint8_t)0x20 //
1377 #define USB_OTGISTAT_SESSVLDCHG (uint8_t)0x08 //
1378 #define USB_OTGISTAT_B_SESS_CHG (uint8_t)0x04 //
1379 #define USB_OTGISTAT_AVBUSCHG (uint8_t)0x01 //
1380 #define USB0_OTGICR *(volatile uint8_t *)0x40072014 // OTG Interrupt Control Register
1381 #define USB_OTGICR_IDEN (uint8_t)0x80 //
1382 #define USB_OTGICR_ONEMSECEN (uint8_t)0x40 //
1383 #define USB_OTGICR_LINESTATEEN (uint8_t)0x20 //
1384 #define USB_OTGICR_SESSVLDEN (uint8_t)0x08 //
1385 #define USB_OTGICR_BSESSEN (uint8_t)0x04 //
1386 #define USB_OTGICR_AVBUSEN (uint8_t)0x01 //
1387 #define USB0_OTGSTAT *(volatile uint8_t *)0x40072018 // OTG Status register
1388 #define USB_OTGSTAT_ID (uint8_t)0x80 //
1389 #define USB_OTGSTAT_ONEMSECEN (uint8_t)0x40 //
1390 #define USB_OTGSTAT_LINESTATESTABLE (uint8_t)0x20 //
1391 #define USB_OTGSTAT_SESS_VLD (uint8_t)0x08 //
1392 #define USB_OTGSTAT_BSESSEND (uint8_t)0x04 //
1393 #define USB_OTGSTAT_AVBUSVLD (uint8_t)0x01 //
1394 #define USB0_OTGCTL *(volatile uint8_t *)0x4007201C // OTG Control Register
1395 #define USB_OTGCTL_DPHIGH (uint8_t)0x80 //
1396 #define USB_OTGCTL_DPLOW (uint8_t)0x20 //
1397 #define USB_OTGCTL_DMLOW (uint8_t)0x10 //
1398 #define USB_OTGCTL_OTGEN (uint8_t)0x04 //
1399 #define USB0_ISTAT *(volatile uint8_t *)0x40072080 // Interrupt Status Register
1400 #define USB_ISTAT_STALL (uint8_t)0x80 //
1401 #define USB_ISTAT_ATTACH (uint8_t)0x40 //
1402 #define USB_ISTAT_RESUME (uint8_t)0x20 //
1403 #define USB_ISTAT_SLEEP (uint8_t)0x10 //
1404 #define USB_ISTAT_TOKDNE (uint8_t)0x08 //
1405 #define USB_ISTAT_SOFTOK (uint8_t)0x04 //
1406 #define USB_ISTAT_ERROR (uint8_t)0x02 //
1407 #define USB_ISTAT_USBRST (uint8_t)0x01 //
1408 #define USB0_INTEN *(volatile uint8_t *)0x40072084 // Interrupt Enable Register
1409 #define USB_INTEN_STALLEN (uint8_t)0x80 //
1410 #define USB_INTEN_ATTACHEN (uint8_t)0x40 //
1411 #define USB_INTEN_RESUMEEN (uint8_t)0x20 //
1412 #define USB_INTEN_SLEEPEN (uint8_t)0x10 //
1413 #define USB_INTEN_TOKDNEEN (uint8_t)0x08 //
1414 #define USB_INTEN_SOFTOKEN (uint8_t)0x04 //
1415 #define USB_INTEN_ERROREN (uint8_t)0x02 //
1416 #define USB_INTEN_USBRSTEN (uint8_t)0x01 //
1417 #define USB0_ERRSTAT *(volatile uint8_t *)0x40072088 // Error Interrupt Status Register
1418 #define USB_ERRSTAT_BTSERR (uint8_t)0x80 //
1419 #define USB_ERRSTAT_DMAERR (uint8_t)0x20 //
1420 #define USB_ERRSTAT_BTOERR (uint8_t)0x10 //
1421 #define USB_ERRSTAT_DFN8 (uint8_t)0x08 //
1422 #define USB_ERRSTAT_CRC16 (uint8_t)0x04 //
1423 #define USB_ERRSTAT_CRC5EOF (uint8_t)0x02 //
1424 #define USB_ERRSTAT_PIDERR (uint8_t)0x01 //
1425 #define USB0_ERREN *(volatile uint8_t *)0x4007208C // Error Interrupt Enable Register
1426 #define USB_ERREN_BTSERREN (uint8_t)0x80 //
1427 #define USB_ERREN_DMAERREN (uint8_t)0x20 //
1428 #define USB_ERREN_BTOERREN (uint8_t)0x10 //
1429 #define USB_ERREN_DFN8EN (uint8_t)0x08 //
1430 #define USB_ERREN_CRC16EN (uint8_t)0x04 //
1431 #define USB_ERREN_CRC5EOFEN (uint8_t)0x02 //
1432 #define USB_ERREN_PIDERREN (uint8_t)0x01 //
1433 #define USB0_STAT *(volatile uint8_t *)0x40072090 // Status Register
1434 #define USB_STAT_TX (uint8_t)0x08 //
1435 #define USB_STAT_ODD (uint8_t)0x04 //
1436 #define USB_STAT_ENDP(n) (uint8_t)((n) >> 4) //
1437 #define USB0_CTL *(volatile uint8_t *)0x40072094 // Control Register
1438 #define USB_CTL_JSTATE (uint8_t)0x80 //
1439 #define USB_CTL_SE0 (uint8_t)0x40 //
1440 #define USB_CTL_TXSUSPENDTOKENBUSY (uint8_t)0x20 //
1441 #define USB_CTL_RESET (uint8_t)0x10 //
1442 #define USB_CTL_HOSTMODEEN (uint8_t)0x08 //
1443 #define USB_CTL_RESUME (uint8_t)0x04 //
1444 #define USB_CTL_ODDRST (uint8_t)0x02 //
1445 #define USB_CTL_USBENSOFEN (uint8_t)0x01 //
1446 #define USB0_ADDR *(volatile uint8_t *)0x40072098 // Address Register
1447 #define USB0_BDTPAGE1 *(volatile uint8_t *)0x4007209C // BDT Page Register 1
1448 #define USB0_FRMNUML *(volatile uint8_t *)0x400720A0 // Frame Number Register Low
1449 #define USB0_FRMNUMH *(volatile uint8_t *)0x400720A4 // Frame Number Register High
1450 #define USB0_TOKEN *(volatile uint8_t *)0x400720A8 // Token Register
1451 #define USB0_SOFTHLD *(volatile uint8_t *)0x400720AC // SOF Threshold Register
1452 #define USB0_BDTPAGE2 *(volatile uint8_t *)0x400720B0 // BDT Page Register 2
1453 #define USB0_BDTPAGE3 *(volatile uint8_t *)0x400720B4 // BDT Page Register 3
1454 #define USB0_ENDPT0 *(volatile uint8_t *)0x400720C0 // Endpoint Control Register
1455 #define USB_ENDPT_HOSTWOHUB (uint8_t)0x80 // host only, enable low speed
1456 #define USB_ENDPT_RETRYDIS (uint8_t)0x40 // host only, set to disable NAK retry
1457 #define USB_ENDPT_EPCTLDIS (uint8_t)0x10 // 0=control, 1=bulk, interrupt, isync
1458 #define USB_ENDPT_EPRXEN (uint8_t)0x08 // enables the endpoint for RX transfers.
1459 #define USB_ENDPT_EPTXEN (uint8_t)0x04 // enables the endpoint for TX transfers.
1460 #define USB_ENDPT_EPSTALL (uint8_t)0x02 // set to stall endpoint
1461 #define USB_ENDPT_EPHSHK (uint8_t)0x01 // enable handshaking during a transaction, generally set unless Isochronous
1462 #define USB0_ENDPT1 *(volatile uint8_t *)0x400720C4 // Endpoint Control Register
1463 #define USB0_ENDPT2 *(volatile uint8_t *)0x400720C8 // Endpoint Control Register
1464 #define USB0_ENDPT3 *(volatile uint8_t *)0x400720CC // Endpoint Control Register
1465 #define USB0_ENDPT4 *(volatile uint8_t *)0x400720D0 // Endpoint Control Register
1466 #define USB0_ENDPT5 *(volatile uint8_t *)0x400720D4 // Endpoint Control Register
1467 #define USB0_ENDPT6 *(volatile uint8_t *)0x400720D8 // Endpoint Control Register
1468 #define USB0_ENDPT7 *(volatile uint8_t *)0x400720DC // Endpoint Control Register
1469 #define USB0_ENDPT8 *(volatile uint8_t *)0x400720E0 // Endpoint Control Register
1470 #define USB0_ENDPT9 *(volatile uint8_t *)0x400720E4 // Endpoint Control Register
1471 #define USB0_ENDPT10 *(volatile uint8_t *)0x400720E8 // Endpoint Control Register
1472 #define USB0_ENDPT11 *(volatile uint8_t *)0x400720EC // Endpoint Control Register
1473 #define USB0_ENDPT12 *(volatile uint8_t *)0x400720F0 // Endpoint Control Register
1474 #define USB0_ENDPT13 *(volatile uint8_t *)0x400720F4 // Endpoint Control Register
1475 #define USB0_ENDPT14 *(volatile uint8_t *)0x400720F8 // Endpoint Control Register
1476 #define USB0_ENDPT15 *(volatile uint8_t *)0x400720FC // Endpoint Control Register
1477 #define USB0_USBCTRL *(volatile uint8_t *)0x40072100 // USB Control Register
1478 #define USB_USBCTRL_SUSP (uint8_t)0x80 // Places the USB transceiver into the suspend state.
1479 #define USB_USBCTRL_PDE (uint8_t)0x40 // Enables the weak pulldowns on the USB transceiver.
1480 #define USB0_OBSERVE *(volatile uint8_t *)0x40072104 // USB OTG Observe Register
1481 #define USB_OBSERVE_DPPU (uint8_t)0x80 //
1482 #define USB_OBSERVE_DPPD (uint8_t)0x40 //
1483 #define USB_OBSERVE_DMPD (uint8_t)0x10 //
1484 #define USB0_CONTROL *(volatile uint8_t *)0x40072108 // USB OTG Control Register
1485 #define USB_CONTROL_DPPULLUPNONOTG (uint8_t)0x10 // Provides control of the DP PULLUP in the USB OTG module, if USB is configured in non-OTG device mode.
1486 #define USB0_USBTRC0 *(volatile uint8_t *)0x4007210C // USB Transceiver Control Register 0
1487 #define USB_USBTRC_USBRESET (uint8_t)0x80 //
1488 #define USB_USBTRC_USBRESMEN (uint8_t)0x20 //
1489 #define USB_USBTRC_SYNC_DET (uint8_t)0x02 //
1490 #define USB_USBTRC_USB_RESUME_INT (uint8_t)0x01 //
1491 #define USB0_USBFRMADJUST *(volatile uint8_t *)0x40072114 // Frame Adjust Register
1493 // Chapter 41: USB Device Charger Detection Module (USBDCD)
1494 #define USBDCD_CONTROL *(volatile uint32_t *)0x40035000 // Control register
1495 #define USBDCD_CLOCK *(volatile uint32_t *)0x40035004 // Clock register
1496 #define USBDCD_STATUS *(volatile uint32_t *)0x40035008 // Status register
1497 #define USBDCD_TIMER0 *(volatile uint32_t *)0x40035010 // TIMER0 register
1498 #define USBDCD_TIMER1 *(volatile uint32_t *)0x40035014 // TIMER1 register
1499 #define USBDCD_TIMER2 *(volatile uint32_t *)0x40035018 // TIMER2 register
1501 // Chapter 43: SPI (DSPI)
1502 #define SPI0_MCR *(volatile uint32_t *)0x4002C000 // DSPI Module Configuration Register
1503 #define SPI_MCR_MSTR (uint32_t)0x80000000 // Master/Slave Mode Select
1504 #define SPI_MCR_CONT_SCKE (uint32_t)0x40000000 //
1505 #define SPI_MCR_DCONF(n) (((n) & 3) << 28) //
1506 #define SPI_MCR_FRZ (uint32_t)0x08000000 //
1507 #define SPI_MCR_MTFE (uint32_t)0x04000000 //
1508 #define SPI_MCR_ROOE (uint32_t)0x01000000 //
1509 #define SPI_MCR_PCSIS(n) (((n) & 0x1F) << 16) //
1510 #define SPI_MCR_DOZE (uint32_t)0x00008000 //
1511 #define SPI_MCR_MDIS (uint32_t)0x00004000 //
1512 #define SPI_MCR_DIS_TXF (uint32_t)0x00002000 //
1513 #define SPI_MCR_DIS_RXF (uint32_t)0x00001000 //
1514 #define SPI_MCR_CLR_TXF (uint32_t)0x00000800 //
1515 #define SPI_MCR_CLR_RXF (uint32_t)0x00000400 //
1516 #define SPI_MCR_SMPL_PT(n) (((n) & 3) << 8) //
1517 #define SPI_MCR_HALT (uint32_t)0x00000001 //
1518 #define SPI0_TCR *(volatile uint32_t *)0x4002C008 // DSPI Transfer Count Register
1519 #define SPI0_CTAR0 *(volatile uint32_t *)0x4002C00C // DSPI Clock and Transfer Attributes Register, In Master Mode
1520 #define SPI_CTAR_DBR (uint32_t)0x80000000 // Double Baud Rate
1521 #define SPI_CTAR_FMSZ(n) (((n) & 15) << 27) // Frame Size (+1)
1522 #define SPI_CTAR_CPOL (uint32_t)0x04000000 // Clock Polarity
1523 #define SPI_CTAR_CPHA (uint32_t)0x02000000 // Clock Phase
1524 #define SPI_CTAR_LSBFE (uint32_t)0x01000000 // LSB First
1525 #define SPI_CTAR_PCSSCK(n) (((n) & 3) << 22) // PCS to SCK Delay Prescaler
1526 #define SPI_CTAR_PASC(n) (((n) & 3) << 20) // After SCK Delay Prescaler
1527 #define SPI_CTAR_PDT(n) (((n) & 3) << 18) // Delay after Transfer Prescaler
1528 #define SPI_CTAR_PBR(n) (((n) & 3) << 16) // Baud Rate Prescaler
1529 #define SPI_CTAR_CSSCK(n) (((n) & 15) << 12) // PCS to SCK Delay Scaler
1530 #define SPI_CTAR_ASC(n) (((n) & 15) << 8) // After SCK Delay Scaler
1531 #define SPI_CTAR_DT(n) (((n) & 15) << 4) // Delay After Transfer Scaler
1532 #define SPI_CTAR_BR(n) (((n) & 15) << 0) // Baud Rate Scaler
1533 #define SPI0_CTAR0_SLAVE *(volatile uint32_t *)0x4002C00C // DSPI Clock and Transfer Attributes Register, In Slave Mode
1534 #define SPI0_CTAR1 *(volatile uint32_t *)0x4002C010 // DSPI Clock and Transfer Attributes Register, In Master Mode
1535 #define SPI0_SR *(volatile uint32_t *)0x4002C02C // DSPI Status Register
1536 #define SPI_SR_TCF (uint32_t)0x80000000 // Transfer Complete Flag
1537 #define SPI_SR_TXRXS (uint32_t)0x40000000 // TX and RX Status
1538 #define SPI_SR_EOQF (uint32_t)0x10000000 // End of Queue Flag
1539 #define SPI_SR_TFUF (uint32_t)0x08000000 // Transmit FIFO Underflow Flag
1540 #define SPI_SR_TFFF (uint32_t)0x02000000 // Transmit FIFO Fill Flag
1541 #define SPI_SR_RFOF (uint32_t)0x00080000 // Receive FIFO Overflow Flag
1542 #define SPI_SR_RFDF (uint32_t)0x00020000 // Receive FIFO Drain Flag
1543 #define SPI0_RSER *(volatile uint32_t *)0x4002C030 // DSPI DMA/Interrupt Request Select and Enable Register
1544 #define SPI_RSER_TCF_RE (uint32_t)0x80000000 // Transmission Complete Request Enable
1545 #define SPI_RSER_EOQF_RE (uint32_t)0x10000000 // DSPI Finished Request Request Enable
1546 #define SPI_RSER_TFUF_RE (uint32_t)0x08000000 // Transmit FIFO Underflow Request Enable
1547 #define SPI_RSER_TFFF_RE (uint32_t)0x02000000 // Transmit FIFO Fill Request Enable
1548 #define SPI_RSER_TFFF_DIRS (uint32_t)0x01000000 // Transmit FIFO FIll Dma or Interrupt Request Select
1549 #define SPI_RSER_RFOF_RE (uint32_t)0x00080000 // Receive FIFO Overflow Request Enable
1550 #define SPI_RSER_RFDF_RE (uint32_t)0x00020000 // Receive FIFO Drain Request Enable
1551 #define SPI_RSER_RFDF_DIRS (uint32_t)0x00010000 // Receive FIFO Drain DMA or Interrupt Request Select
1552 #define SPI0_PUSHR *(volatile uint32_t *)0x4002C034 // DSPI PUSH TX FIFO Register In Master Mode
1553 #define SPI_PUSHR_CONT (uint32_t)0x80000000 //
1554 #define SPI_PUSHR_CTAS(n) (((n) & 7) << 28) //
1555 #define SPI_PUSHR_EOQ (uint32_t)0x08000000 //
1556 #define SPI_PUSHR_CTCNT (uint32_t)0x04000000 //
1557 #define SPI_PUSHR_PCS(n) (((n) & 31) << 16) //
1558 #define SPI0_PUSHR_SLAVE *(volatile uint32_t *)0x4002C034 // DSPI PUSH TX FIFO Register In Slave Mode
1559 #define SPI0_POPR *(volatile uint32_t *)0x4002C038 // DSPI POP RX FIFO Register
1560 #define SPI0_TXFR0 *(volatile uint32_t *)0x4002C03C // DSPI Transmit FIFO Registers
1561 #define SPI0_TXFR1 *(volatile uint32_t *)0x4002C040 // DSPI Transmit FIFO Registers
1562 #define SPI0_TXFR2 *(volatile uint32_t *)0x4002C044 // DSPI Transmit FIFO Registers
1563 #define SPI0_TXFR3 *(volatile uint32_t *)0x4002C048 // DSPI Transmit FIFO Registers
1564 #define SPI0_RXFR0 *(volatile uint32_t *)0x4002C07C // DSPI Receive FIFO Registers
1565 #define SPI0_RXFR1 *(volatile uint32_t *)0x4002C080 // DSPI Receive FIFO Registers
1566 #define SPI0_RXFR2 *(volatile uint32_t *)0x4002C084 // DSPI Receive FIFO Registers
1567 #define SPI0_RXFR3 *(volatile uint32_t *)0x4002C088 // DSPI Receive FIFO Registers
1569 volatile uint32_t MCR; // 0
1570 volatile uint32_t unused1;// 4
1571 volatile uint32_t TCR; // 8
1572 volatile uint32_t CTAR0; // c
1573 volatile uint32_t CTAR1; // 10
1574 volatile uint32_t CTAR2; // 14
1575 volatile uint32_t CTAR3; // 18
1576 volatile uint32_t CTAR4; // 1c
1577 volatile uint32_t CTAR5; // 20
1578 volatile uint32_t CTAR6; // 24
1579 volatile uint32_t CTAR7; // 28
1580 volatile uint32_t SR; // 2c
1581 volatile uint32_t RSER; // 30
1582 volatile uint32_t PUSHR; // 34
1583 volatile uint32_t POPR; // 38
1584 volatile uint32_t TXFR[16]; // 3c
1585 volatile uint32_t RXFR[16]; // 7c
1587 #define SPI0 (*(SPI_t *)0x4002C000)
1589 // Chapter 44: Inter-Integrated Circuit (I2C)
1590 #define I2C0_A1 *(volatile uint8_t *)0x40066000 // I2C Address Register 1
1591 #define I2C0_F *(volatile uint8_t *)0x40066001 // I2C Frequency Divider register
1592 #define I2C0_C1 *(volatile uint8_t *)0x40066002 // I2C Control Register 1
1593 #define I2C_C1_IICEN (uint8_t)0x80 // I2C Enable
1594 #define I2C_C1_IICIE (uint8_t)0x40 // I2C Interrupt Enable
1595 #define I2C_C1_MST (uint8_t)0x20 // Master Mode Select
1596 #define I2C_C1_TX (uint8_t)0x10 // Transmit Mode Select
1597 #define I2C_C1_TXAK (uint8_t)0x08 // Transmit Acknowledge Enable
1598 #define I2C_C1_RSTA (uint8_t)0x04 // Repeat START
1599 #define I2C_C1_WUEN (uint8_t)0x02 // Wakeup Enable
1600 #define I2C_C1_DMAEN (uint8_t)0x01 // DMA Enable
1601 #define I2C0_S *(volatile uint8_t *)0x40066003 // I2C Status register
1602 #define I2C_S_TCF (uint8_t)0x80 // Transfer Complete Flag
1603 #define I2C_S_IAAS (uint8_t)0x40 // Addressed As A Slave
1604 #define I2C_S_BUSY (uint8_t)0x20 // Bus Busy
1605 #define I2C_S_ARBL (uint8_t)0x10 // Arbitration Lost
1606 #define I2C_S_RAM (uint8_t)0x08 // Range Address Match
1607 #define I2C_S_SRW (uint8_t)0x04 // Slave Read/Write
1608 #define I2C_S_IICIF (uint8_t)0x02 // Interrupt Flag
1609 #define I2C_S_RXAK (uint8_t)0x01 // Receive Acknowledge
1610 #define I2C0_D *(volatile uint8_t *)0x40066004 // I2C Data I/O register
1611 #define I2C0_C2 *(volatile uint8_t *)0x40066005 // I2C Control Register 2
1612 #define I2C_C2_GCAEN (uint8_t)0x80 // General Call Address Enable
1613 #define I2C_C2_ADEXT (uint8_t)0x40 // Address Extension
1614 #define I2C_C2_HDRS (uint8_t)0x20 // High Drive Select
1615 #define I2C_C2_SBRC (uint8_t)0x10 // Slave Baud Rate Control
1616 #define I2C_C2_RMEN (uint8_t)0x08 // Range Address Matching Enable
1617 #define I2C_C2_AD(n) ((n) & 7) // Slave Address, upper 3 bits
1618 #define I2C0_FLT *(volatile uint8_t *)0x40066006 // I2C Programmable Input Glitch Filter register
1619 #define I2C0_RA *(volatile uint8_t *)0x40066007 // I2C Range Address register
1620 #define I2C0_SMB *(volatile uint8_t *)0x40066008 // I2C SMBus Control and Status register
1621 #define I2C0_A2 *(volatile uint8_t *)0x40066009 // I2C Address Register 2
1622 #define I2C0_SLTH *(volatile uint8_t *)0x4006600A // I2C SCL Low Timeout Register High
1623 #define I2C0_SLTL *(volatile uint8_t *)0x4006600B // I2C SCL Low Timeout Register Low
1625 #define I2C1_A1 *(volatile uint8_t *)0x40067000 // I2C Address Register 1
1626 #define I2C1_F *(volatile uint8_t *)0x40067001 // I2C Frequency Divider register
1627 #define I2C1_C1 *(volatile uint8_t *)0x40067002 // I2C Control Register 1
1628 #define I2C1_S *(volatile uint8_t *)0x40067003 // I2C Status register
1629 #define I2C1_D *(volatile uint8_t *)0x40067004 // I2C Data I/O register
1630 #define I2C1_C2 *(volatile uint8_t *)0x40067005 // I2C Control Register 2
1631 #define I2C1_FLT *(volatile uint8_t *)0x40067006 // I2C Programmable Input Glitch Filter register
1632 #define I2C1_RA *(volatile uint8_t *)0x40067007 // I2C Range Address register
1633 #define I2C1_SMB *(volatile uint8_t *)0x40067008 // I2C SMBus Control and Status register
1634 #define I2C1_A2 *(volatile uint8_t *)0x40067009 // I2C Address Register 2
1635 #define I2C1_SLTH *(volatile uint8_t *)0x4006700A // I2C SCL Low Timeout Register High
1636 #define I2C1_SLTL *(volatile uint8_t *)0x4006700B // I2C SCL Low Timeout Register Low
1638 // Chapter 45: Universal Asynchronous Receiver/Transmitter (UART)
1639 #define UART0_BDH *(volatile uint8_t *)0x4006A000 // UART Baud Rate Registers: High
1640 #define UART0_BDL *(volatile uint8_t *)0x4006A001 // UART Baud Rate Registers: Low
1641 #define UART0_C1 *(volatile uint8_t *)0x4006A002 // UART Control Register 1
1642 #define UART_C1_LOOPS (uint8_t)0x80 // When LOOPS is set, the RxD pin is disconnected from the UART and the transmitter output is internally connected to the receiver input
1643 #define UART_C1_UARTSWAI (uint8_t)0x40 // UART Stops in Wait Mode
1644 #define UART_C1_RSRC (uint8_t)0x20 // When LOOPS is set, the RSRC field determines the source for the receiver shift register input
1645 #define UART_C1_M (uint8_t)0x10 // 9-bit or 8-bit Mode Select
1646 #define UART_C1_WAKE (uint8_t)0x08 // Determines which condition wakes the UART
1647 #define UART_C1_ILT (uint8_t)0x04 // Idle Line Type Select
1648 #define UART_C1_PE (uint8_t)0x02 // Parity Enable
1649 #define UART_C1_PT (uint8_t)0x01 // Parity Type, 0=even, 1=odd
1650 #define UART0_C2 *(volatile uint8_t *)0x4006A003 // UART Control Register 2
1651 #define UART_C2_TIE (uint8_t)0x80 // Transmitter Interrupt or DMA Transfer Enable.
1652 #define UART_C2_TCIE (uint8_t)0x40 // Transmission Complete Interrupt Enable
1653 #define UART_C2_RIE (uint8_t)0x20 // Receiver Full Interrupt or DMA Transfer Enable
1654 #define UART_C2_ILIE (uint8_t)0x10 // Idle Line Interrupt Enable
1655 #define UART_C2_TE (uint8_t)0x08 // Transmitter Enable
1656 #define UART_C2_RE (uint8_t)0x04 // Receiver Enable
1657 #define UART_C2_RWU (uint8_t)0x02 // Receiver Wakeup Control
1658 #define UART_C2_SBK (uint8_t)0x01 // Send Break
1659 #define UART0_S1 *(volatile uint8_t *)0x4006A004 // UART Status Register 1
1660 #define UART_S1_TDRE (uint8_t)0x80 // Transmit Data Register Empty Flag
1661 #define UART_S1_TC (uint8_t)0x40 // Transmit Complete Flag
1662 #define UART_S1_RDRF (uint8_t)0x20 // Receive Data Register Full Flag
1663 #define UART_S1_IDLE (uint8_t)0x10 // Idle Line Flag
1664 #define UART_S1_OR (uint8_t)0x08 // Receiver Overrun Flag
1665 #define UART_S1_NF (uint8_t)0x04 // Noise Flag
1666 #define UART_S1_FE (uint8_t)0x02 // Framing Error Flag
1667 #define UART_S1_PF (uint8_t)0x01 // Parity Error Flag
1668 #define UART0_S2 *(volatile uint8_t *)0x4006A005 // UART Status Register 2
1669 #define UART0_C3 *(volatile uint8_t *)0x4006A006 // UART Control Register 3
1670 #define UART0_D *(volatile uint8_t *)0x4006A007 // UART Data Register
1671 #define UART0_MA1 *(volatile uint8_t *)0x4006A008 // UART Match Address Registers 1
1672 #define UART0_MA2 *(volatile uint8_t *)0x4006A009 // UART Match Address Registers 2
1673 #define UART0_C4 *(volatile uint8_t *)0x4006A00A // UART Control Register 4
1674 #define UART0_C5 *(volatile uint8_t *)0x4006A00B // UART Control Register 5
1675 #define UART0_ED *(volatile uint8_t *)0x4006A00C // UART Extended Data Register
1676 #define UART0_MODEM *(volatile uint8_t *)0x4006A00D // UART Modem Register
1677 #define UART0_IR *(volatile uint8_t *)0x4006A00E // UART Infrared Register
1678 #define UART0_PFIFO *(volatile uint8_t *)0x4006A010 // UART FIFO Parameters
1679 #define UART_PFIFO_TXFE (uint8_t)0x80
1680 #define UART_PFIFO_RXFE (uint8_t)0x08
1681 #define UART0_CFIFO *(volatile uint8_t *)0x4006A011 // UART FIFO Control Register
1682 #define UART_CFIFO_TXFLUSH (uint8_t)0x80 //
1683 #define UART_CFIFO_RXFLUSH (uint8_t)0x40 //
1684 #define UART_CFIFO_RXOFE (uint8_t)0x04 //
1685 #define UART_CFIFO_TXOFE (uint8_t)0x02 //
1686 #define UART_CFIFO_RXUFE (uint8_t)0x01 //
1687 #define UART0_SFIFO *(volatile uint8_t *)0x4006A012 // UART FIFO Status Register
1688 #define UART_SFIFO_TXEMPT (uint8_t)0x80
1689 #define UART_SFIFO_RXEMPT (uint8_t)0x40
1690 #define UART_SFIFO_RXOF (uint8_t)0x04
1691 #define UART_SFIFO_TXOF (uint8_t)0x02
1692 #define UART_SFIFO_RXUF (uint8_t)0x01
1693 #define UART0_TWFIFO *(volatile uint8_t *)0x4006A013 // UART FIFO Transmit Watermark
1694 #define UART0_TCFIFO *(volatile uint8_t *)0x4006A014 // UART FIFO Transmit Count
1695 #define UART0_RWFIFO *(volatile uint8_t *)0x4006A015 // UART FIFO Receive Watermark
1696 #define UART0_RCFIFO *(volatile uint8_t *)0x4006A016 // UART FIFO Receive Count
1697 #define UART0_C7816 *(volatile uint8_t *)0x4006A018 // UART 7816 Control Register
1698 #define UART0_IE7816 *(volatile uint8_t *)0x4006A019 // UART 7816 Interrupt Enable Register
1699 #define UART0_IS7816 *(volatile uint8_t *)0x4006A01A // UART 7816 Interrupt Status Register
1700 #define UART0_WP7816T0 *(volatile uint8_t *)0x4006A01B // UART 7816 Wait Parameter Register
1701 #define UART0_WP7816T1 *(volatile uint8_t *)0x4006A01B // UART 7816 Wait Parameter Register
1702 #define UART0_WN7816 *(volatile uint8_t *)0x4006A01C // UART 7816 Wait N Register
1703 #define UART0_WF7816 *(volatile uint8_t *)0x4006A01D // UART 7816 Wait FD Register
1704 #define UART0_ET7816 *(volatile uint8_t *)0x4006A01E // UART 7816 Error Threshold Register
1705 #define UART0_TL7816 *(volatile uint8_t *)0x4006A01F // UART 7816 Transmit Length Register
1706 #define UART0_C6 *(volatile uint8_t *)0x4006A021 // UART CEA709.1-B Control Register 6
1707 #define UART0_PCTH *(volatile uint8_t *)0x4006A022 // UART CEA709.1-B Packet Cycle Time Counter High
1708 #define UART0_PCTL *(volatile uint8_t *)0x4006A023 // UART CEA709.1-B Packet Cycle Time Counter Low
1709 #define UART0_B1T *(volatile uint8_t *)0x4006A024 // UART CEA709.1-B Beta1 Timer
1710 #define UART0_SDTH *(volatile uint8_t *)0x4006A025 // UART CEA709.1-B Secondary Delay Timer High
1711 #define UART0_SDTL *(volatile uint8_t *)0x4006A026 // UART CEA709.1-B Secondary Delay Timer Low
1712 #define UART0_PRE *(volatile uint8_t *)0x4006A027 // UART CEA709.1-B Preamble
1713 #define UART0_TPL *(volatile uint8_t *)0x4006A028 // UART CEA709.1-B Transmit Packet Length
1714 #define UART0_IE *(volatile uint8_t *)0x4006A029 // UART CEA709.1-B Interrupt Enable Register
1715 #define UART0_WB *(volatile uint8_t *)0x4006A02A // UART CEA709.1-B WBASE
1716 #define UART0_S3 *(volatile uint8_t *)0x4006A02B // UART CEA709.1-B Status Register
1717 #define UART0_S4 *(volatile uint8_t *)0x4006A02C // UART CEA709.1-B Status Register
1718 #define UART0_RPL *(volatile uint8_t *)0x4006A02D // UART CEA709.1-B Received Packet Length
1719 #define UART0_RPREL *(volatile uint8_t *)0x4006A02E // UART CEA709.1-B Received Preamble Length
1720 #define UART0_CPW *(volatile uint8_t *)0x4006A02F // UART CEA709.1-B Collision Pulse Width
1721 #define UART0_RIDT *(volatile uint8_t *)0x4006A030 // UART CEA709.1-B Receive Indeterminate Time
1722 #define UART0_TIDT *(volatile uint8_t *)0x4006A031 // UART CEA709.1-B Transmit Indeterminate Time
1723 #define UART1_BDH *(volatile uint8_t *)0x4006B000 // UART Baud Rate Registers: High
1724 #define UART1_BDL *(volatile uint8_t *)0x4006B001 // UART Baud Rate Registers: Low
1725 #define UART1_C1 *(volatile uint8_t *)0x4006B002 // UART Control Register 1
1726 #define UART1_C2 *(volatile uint8_t *)0x4006B003 // UART Control Register 2
1727 #define UART1_S1 *(volatile uint8_t *)0x4006B004 // UART Status Register 1
1728 #define UART1_S2 *(volatile uint8_t *)0x4006B005 // UART Status Register 2
1729 #define UART1_C3 *(volatile uint8_t *)0x4006B006 // UART Control Register 3
1730 #define UART1_D *(volatile uint8_t *)0x4006B007 // UART Data Register
1731 #define UART1_MA1 *(volatile uint8_t *)0x4006B008 // UART Match Address Registers 1
1732 #define UART1_MA2 *(volatile uint8_t *)0x4006B009 // UART Match Address Registers 2
1733 #define UART1_C4 *(volatile uint8_t *)0x4006B00A // UART Control Register 4
1734 #define UART1_C5 *(volatile uint8_t *)0x4006B00B // UART Control Register 5
1735 #define UART1_ED *(volatile uint8_t *)0x4006B00C // UART Extended Data Register
1736 #define UART1_MODEM *(volatile uint8_t *)0x4006B00D // UART Modem Register
1737 #define UART1_IR *(volatile uint8_t *)0x4006B00E // UART Infrared Register
1738 #define UART1_PFIFO *(volatile uint8_t *)0x4006B010 // UART FIFO Parameters
1739 #define UART1_CFIFO *(volatile uint8_t *)0x4006B011 // UART FIFO Control Register
1740 #define UART1_SFIFO *(volatile uint8_t *)0x4006B012 // UART FIFO Status Register
1741 #define UART1_TWFIFO *(volatile uint8_t *)0x4006B013 // UART FIFO Transmit Watermark
1742 #define UART1_TCFIFO *(volatile uint8_t *)0x4006B014 // UART FIFO Transmit Count
1743 #define UART1_RWFIFO *(volatile uint8_t *)0x4006B015 // UART FIFO Receive Watermark
1744 #define UART1_RCFIFO *(volatile uint8_t *)0x4006B016 // UART FIFO Receive Count
1745 #define UART1_C7816 *(volatile uint8_t *)0x4006B018 // UART 7816 Control Register
1746 #define UART1_IE7816 *(volatile uint8_t *)0x4006B019 // UART 7816 Interrupt Enable Register
1747 #define UART1_IS7816 *(volatile uint8_t *)0x4006B01A // UART 7816 Interrupt Status Register
1748 #define UART1_WP7816T0 *(volatile uint8_t *)0x4006B01B // UART 7816 Wait Parameter Register
1749 #define UART1_WP7816T1 *(volatile uint8_t *)0x4006B01B // UART 7816 Wait Parameter Register
1750 #define UART1_WN7816 *(volatile uint8_t *)0x4006B01C // UART 7816 Wait N Register
1751 #define UART1_WF7816 *(volatile uint8_t *)0x4006B01D // UART 7816 Wait FD Register
1752 #define UART1_ET7816 *(volatile uint8_t *)0x4006B01E // UART 7816 Error Threshold Register
1753 #define UART1_TL7816 *(volatile uint8_t *)0x4006B01F // UART 7816 Transmit Length Register
1754 #define UART1_C6 *(volatile uint8_t *)0x4006B021 // UART CEA709.1-B Control Register 6
1755 #define UART1_PCTH *(volatile uint8_t *)0x4006B022 // UART CEA709.1-B Packet Cycle Time Counter High
1756 #define UART1_PCTL *(volatile uint8_t *)0x4006B023 // UART CEA709.1-B Packet Cycle Time Counter Low
1757 #define UART1_B1T *(volatile uint8_t *)0x4006B024 // UART CEA709.1-B Beta1 Timer
1758 #define UART1_SDTH *(volatile uint8_t *)0x4006B025 // UART CEA709.1-B Secondary Delay Timer High
1759 #define UART1_SDTL *(volatile uint8_t *)0x4006B026 // UART CEA709.1-B Secondary Delay Timer Low
1760 #define UART1_PRE *(volatile uint8_t *)0x4006B027 // UART CEA709.1-B Preamble
1761 #define UART1_TPL *(volatile uint8_t *)0x4006B028 // UART CEA709.1-B Transmit Packet Length
1762 #define UART1_IE *(volatile uint8_t *)0x4006B029 // UART CEA709.1-B Interrupt Enable Register
1763 #define UART1_WB *(volatile uint8_t *)0x4006B02A // UART CEA709.1-B WBASE
1764 #define UART1_S3 *(volatile uint8_t *)0x4006B02B // UART CEA709.1-B Status Register
1765 #define UART1_S4 *(volatile uint8_t *)0x4006B02C // UART CEA709.1-B Status Register
1766 #define UART1_RPL *(volatile uint8_t *)0x4006B02D // UART CEA709.1-B Received Packet Length
1767 #define UART1_RPREL *(volatile uint8_t *)0x4006B02E // UART CEA709.1-B Received Preamble Length
1768 #define UART1_CPW *(volatile uint8_t *)0x4006B02F // UART CEA709.1-B Collision Pulse Width
1769 #define UART1_RIDT *(volatile uint8_t *)0x4006B030 // UART CEA709.1-B Receive Indeterminate Time
1770 #define UART1_TIDT *(volatile uint8_t *)0x4006B031 // UART CEA709.1-B Transmit Indeterminate Time
1771 #define UART2_BDH *(volatile uint8_t *)0x4006C000 // UART Baud Rate Registers: High
1772 #define UART2_BDL *(volatile uint8_t *)0x4006C001 // UART Baud Rate Registers: Low
1773 #define UART2_C1 *(volatile uint8_t *)0x4006C002 // UART Control Register 1
1774 #define UART2_C2 *(volatile uint8_t *)0x4006C003 // UART Control Register 2
1775 #define UART2_S1 *(volatile uint8_t *)0x4006C004 // UART Status Register 1
1776 #define UART2_S2 *(volatile uint8_t *)0x4006C005 // UART Status Register 2
1777 #define UART2_C3 *(volatile uint8_t *)0x4006C006 // UART Control Register 3
1778 #define UART2_D *(volatile uint8_t *)0x4006C007 // UART Data Register
1779 #define UART2_MA1 *(volatile uint8_t *)0x4006C008 // UART Match Address Registers 1
1780 #define UART2_MA2 *(volatile uint8_t *)0x4006C009 // UART Match Address Registers 2
1781 #define UART2_C4 *(volatile uint8_t *)0x4006C00A // UART Control Register 4
1782 #define UART2_C5 *(volatile uint8_t *)0x4006C00B // UART Control Register 5
1783 #define UART2_ED *(volatile uint8_t *)0x4006C00C // UART Extended Data Register
1784 #define UART2_MODEM *(volatile uint8_t *)0x4006C00D // UART Modem Register
1785 #define UART2_IR *(volatile uint8_t *)0x4006C00E // UART Infrared Register
1786 #define UART2_PFIFO *(volatile uint8_t *)0x4006C010 // UART FIFO Parameters
1787 #define UART2_CFIFO *(volatile uint8_t *)0x4006C011 // UART FIFO Control Register
1788 #define UART2_SFIFO *(volatile uint8_t *)0x4006C012 // UART FIFO Status Register
1789 #define UART2_TWFIFO *(volatile uint8_t *)0x4006C013 // UART FIFO Transmit Watermark
1790 #define UART2_TCFIFO *(volatile uint8_t *)0x4006C014 // UART FIFO Transmit Count
1791 #define UART2_RWFIFO *(volatile uint8_t *)0x4006C015 // UART FIFO Receive Watermark
1792 #define UART2_RCFIFO *(volatile uint8_t *)0x4006C016 // UART FIFO Receive Count
1793 #define UART2_C7816 *(volatile uint8_t *)0x4006C018 // UART 7816 Control Register
1794 #define UART2_IE7816 *(volatile uint8_t *)0x4006C019 // UART 7816 Interrupt Enable Register
1795 #define UART2_IS7816 *(volatile uint8_t *)0x4006C01A // UART 7816 Interrupt Status Register
1796 #define UART2_WP7816T0 *(volatile uint8_t *)0x4006C01B // UART 7816 Wait Parameter Register
1797 #define UART2_WP7816T1 *(volatile uint8_t *)0x4006C01B // UART 7816 Wait Parameter Register
1798 #define UART2_WN7816 *(volatile uint8_t *)0x4006C01C // UART 7816 Wait N Register
1799 #define UART2_WF7816 *(volatile uint8_t *)0x4006C01D // UART 7816 Wait FD Register
1800 #define UART2_ET7816 *(volatile uint8_t *)0x4006C01E // UART 7816 Error Threshold Register
1801 #define UART2_TL7816 *(volatile uint8_t *)0x4006C01F // UART 7816 Transmit Length Register
1802 #define UART2_C6 *(volatile uint8_t *)0x4006C021 // UART CEA709.1-B Control Register 6
1803 #define UART2_PCTH *(volatile uint8_t *)0x4006C022 // UART CEA709.1-B Packet Cycle Time Counter High
1804 #define UART2_PCTL *(volatile uint8_t *)0x4006C023 // UART CEA709.1-B Packet Cycle Time Counter Low
1805 #define UART2_B1T *(volatile uint8_t *)0x4006C024 // UART CEA709.1-B Beta1 Timer
1806 #define UART2_SDTH *(volatile uint8_t *)0x4006C025 // UART CEA709.1-B Secondary Delay Timer High
1807 #define UART2_SDTL *(volatile uint8_t *)0x4006C026 // UART CEA709.1-B Secondary Delay Timer Low
1808 #define UART2_PRE *(volatile uint8_t *)0x4006C027 // UART CEA709.1-B Preamble
1809 #define UART2_TPL *(volatile uint8_t *)0x4006C028 // UART CEA709.1-B Transmit Packet Length
1810 #define UART2_IE *(volatile uint8_t *)0x4006C029 // UART CEA709.1-B Interrupt Enable Register
1811 #define UART2_WB *(volatile uint8_t *)0x4006C02A // UART CEA709.1-B WBASE
1812 #define UART2_S3 *(volatile uint8_t *)0x4006C02B // UART CEA709.1-B Status Register
1813 #define UART2_S4 *(volatile uint8_t *)0x4006C02C // UART CEA709.1-B Status Register
1814 #define UART2_RPL *(volatile uint8_t *)0x4006C02D // UART CEA709.1-B Received Packet Length
1815 #define UART2_RPREL *(volatile uint8_t *)0x4006C02E // UART CEA709.1-B Received Preamble Length
1816 #define UART2_CPW *(volatile uint8_t *)0x4006C02F // UART CEA709.1-B Collision Pulse Width
1817 #define UART2_RIDT *(volatile uint8_t *)0x4006C030 // UART CEA709.1-B Receive Indeterminate Time
1818 #define UART2_TIDT *(volatile uint8_t *)0x4006C031 // UART CEA709.1-B Transmit Indeterminate Time
1820 // Chapter 46: Synchronous Audio Interface (SAI)
1821 #define I2S0_TCSR *(volatile uint32_t *)0x4002F000 // SAI Transmit Control Register
1822 #define I2S_TCSR_TE (uint32_t)0x80000000 // Transmitter Enable
1823 #define I2S_TCSR_STOPE (uint32_t)0x40000000 // Transmitter Enable in Stop mode
1824 #define I2S_TCSR_DBGE (uint32_t)0x20000000 // Transmitter Enable in Debug mode
1825 #define I2S_TCSR_BCE (uint32_t)0x10000000 // Bit Clock Enable
1826 #define I2S_TCSR_FR (uint32_t)0x02000000 // FIFO Reset
1827 #define I2S_TCSR_SR (uint32_t)0x01000000 // Software Reset
1828 #define I2S_TCSR_WSF (uint32_t)0x00100000 // Word Start Flag
1829 #define I2S_TCSR_SEF (uint32_t)0x00080000 // Sync Error Flag
1830 #define I2S_TCSR_FEF (uint32_t)0x00040000 // FIFO Error Flag (underrun)
1831 #define I2S_TCSR_FWF (uint32_t)0x00020000 // FIFO Warning Flag (empty)
1832 #define I2S_TCSR_FRF (uint32_t)0x00010000 // FIFO Request Flag (Data Ready)
1833 #define I2S_TCSR_WSIE (uint32_t)0x00001000 // Word Start Interrupt Enable
1834 #define I2S_TCSR_SEIE (uint32_t)0x00000800 // Sync Error Interrupt Enable
1835 #define I2S_TCSR_FEIE (uint32_t)0x00000400 // FIFO Error Interrupt Enable
1836 #define I2S_TCSR_FWIE (uint32_t)0x00000200 // FIFO Warning Interrupt Enable
1837 #define I2S_TCSR_FRIE (uint32_t)0x00000100 // FIFO Request Interrupt Enable
1838 #define I2S_TCSR_FWDE (uint32_t)0x00000002 // FIFO Warning DMA Enable
1839 #define I2S_TCSR_FRDE (uint32_t)0x00000001 // FIFO Request DMA Enable
1840 #define I2S0_TCR1 *(volatile uint32_t *)0x4002F004 // SAI Transmit Configuration 1 Register
1841 #define I2S_TCR1_TFW(n) ((uint32_t)n & 0x03) // Transmit FIFO watermark
1842 #define I2S0_TCR2 *(volatile uint32_t *)0x4002F008 // SAI Transmit Configuration 2 Register
1843 #define I2S_TCR2_DIV(n) ((uint32_t)n & 0xff) // Bit clock divide by (DIV+1)*2
1844 #define I2S_TCR2_BCD ((uint32_t)1<<24) // Bit clock direction
1845 #define I2S_TCR2_BCP ((uint32_t)1<<25) // Bit clock polarity
1846 #define I2S_TCR2_MSEL(n) ((uint32_t)(n & 3)<<26) // MCLK select, 0=bus clock, 1=I2S0_MCLK
1847 #define I2S_TCR2_BCI ((uint32_t)1<<28) // Bit clock input
1848 #define I2S_TCR2_BCS ((uint32_t)1<<29) // Bit clock swap
1849 #define I2S_TCR2_SYNC(n) ((uint32_t)(n & 3)<<30) // 0=async 1=sync with receiver
1850 #define I2S0_TCR3 *(volatile uint32_t *)0x4002F00C // SAI Transmit Configuration 3 Register
1851 #define I2S_TCR3_WDFL(n) ((uint32_t)n & 0x0f) // word flag configuration
1852 #define I2S_TCR3_TCE ((uint32_t)0x10000) // transmit channel enable
1853 #define I2S0_TCR4 *(volatile uint32_t *)0x4002F010 // SAI Transmit Configuration 4 Register
1854 #define I2S_TCR4_FSD ((uint32_t)1) // Frame Sync Direction
1855 #define I2S_TCR4_FSP ((uint32_t)2) // Frame Sync Polarity
1856 #define I2S_TCR4_FSE ((uint32_t)8) // Frame Sync Early
1857 #define I2S_TCR4_MF ((uint32_t)0x10) // MSB First
1858 #define I2S_TCR4_SYWD(n) ((uint32_t)(n & 0x1f)<<8) // Sync Width
1859 #define I2S_TCR4_FRSZ(n) ((uint32_t)(n & 0x0f)<<16) // Frame Size
1860 #define I2S0_TCR5 *(volatile uint32_t *)0x4002F014 // SAI Transmit Configuration 5 Register
1861 #define I2S_TCR5_FBT(n) ((uint32_t)(n & 0x1f)<<8) // First Bit Shifted
1862 #define I2S_TCR5_W0W(n) ((uint32_t)(n & 0x1f)<<16) // Word 0 Width
1863 #define I2S_TCR5_WNW(n) ((uint32_t)(n & 0x1f)<<24) // Word N Width
1864 #define I2S0_TDR0 *(volatile uint32_t *)0x4002F020 // SAI Transmit Data Register
1865 #define I2S0_TDR1 *(volatile uint32_t *)0x4002F024 // SAI Transmit Data Register
1866 #define I2S0_TFR0 *(volatile uint32_t *)0x4002F040 // SAI Transmit FIFO Register
1867 #define I2S0_TFR1 *(volatile uint32_t *)0x4002F044 // SAI Transmit FIFO Register
1868 #define I2S_TFR_RFP(n) ((uint32_t)n & 7) // read FIFO pointer
1869 #define I2S_TFR_WFP(n) ((uint32_t)(n & 7)<<16) // write FIFO pointer
1870 #define I2S0_TMR *(volatile uint32_t *)0x4002F060 // SAI Transmit Mask Register
1871 #define I2S_TMR_TWM(n) ((uint32_t)n & 0xFFFFFFFF)
1872 #define I2S0_RCSR *(volatile uint32_t *)0x4002F080 // SAI Receive Control Register
1873 #define I2S_RCSR_RE (uint32_t)0x80000000 // Receiver Enable
1874 #define I2S_RCSR_STOPE (uint32_t)0x40000000 // Receiver Enable in Stop mode
1875 #define I2S_RCSR_DBGE (uint32_t)0x20000000 // Receiver Enable in Debug mode
1876 #define I2S_RCSR_BCE (uint32_t)0x10000000 // Bit Clock Enable
1877 #define I2S_RCSR_FR (uint32_t)0x02000000 // FIFO Reset
1878 #define I2S_RCSR_SR (uint32_t)0x01000000 // Software Reset
1879 #define I2S_RCSR_WSF (uint32_t)0x00100000 // Word Start Flag
1880 #define I2S_RCSR_SEF (uint32_t)0x00080000 // Sync Error Flag
1881 #define I2S_RCSR_FEF (uint32_t)0x00040000 // FIFO Error Flag (underrun)
1882 #define I2S_RCSR_FWF (uint32_t)0x00020000 // FIFO Warning Flag (empty)
1883 #define I2S_RCSR_FRF (uint32_t)0x00010000 // FIFO Request Flag (Data Ready)
1884 #define I2S_RCSR_WSIE (uint32_t)0x00001000 // Word Start Interrupt Enable
1885 #define I2S_RCSR_SEIE (uint32_t)0x00000800 // Sync Error Interrupt Enable
1886 #define I2S_RCSR_FEIE (uint32_t)0x00000400 // FIFO Error Interrupt Enable
1887 #define I2S_RCSR_FWIE (uint32_t)0x00000200 // FIFO Warning Interrupt Enable
1888 #define I2S_RCSR_FRIE (uint32_t)0x00000100 // FIFO Request Interrupt Enable
1889 #define I2S_RCSR_FWDE (uint32_t)0x00000002 // FIFO Warning DMA Enable
1890 #define I2S_RCSR_FRDE (uint32_t)0x00000001 // FIFO Request DMA Enable
1891 #define I2S0_RCR1 *(volatile uint32_t *)0x4002F084 // SAI Receive Configuration 1 Register
1892 #define I2S_RCR1_RFW(n) ((uint32_t)n & 0x03) // Receive FIFO watermark
1893 #define I2S0_RCR2 *(volatile uint32_t *)0x4002F088 // SAI Receive Configuration 2 Register
1894 #define I2S_RCR2_DIV(n) ((uint32_t)n & 0xff) // Bit clock divide by (DIV+1)*2
1895 #define I2S_RCR2_BCD ((uint32_t)1<<24) // Bit clock direction
1896 #define I2S_RCR2_BCP ((uint32_t)1<<25) // Bit clock polarity
1897 #define I2S_RCR2_MSEL(n) ((uint32_t)(n & 3)<<26) // MCLK select, 0=bus clock, 1=I2S0_MCLK
1898 #define I2S_RCR2_BCI ((uint32_t)1<<28) // Bit clock input
1899 #define I2S_RCR2_BCS ((uint32_t)1<<29) // Bit clock swap
1900 #define I2S_RCR2_SYNC(n) ((uint32_t)(n & 3)<<30) // 0=async 1=sync with receiver
1901 #define I2S0_RCR3 *(volatile uint32_t *)0x4002F08C // SAI Receive Configuration 3 Register
1902 #define I2S_RCR3_WDFL(n) ((uint32_t)n & 0x0f) // word flag configuration
1903 #define I2S_RCR3_RCE ((uint32_t)0x10000) // receive channel enable
1904 #define I2S0_RCR4 *(volatile uint32_t *)0x4002F090 // SAI Receive Configuration 4 Register
1905 #define I2S_RCR4_FSD ((uint32_t)1) // Frame Sync Direction
1906 #define I2S_RCR4_FSP ((uint32_t)2) // Frame Sync Polarity
1907 #define I2S_RCR4_FSE ((uint32_t)8) // Frame Sync Early
1908 #define I2S_RCR4_MF ((uint32_t)0x10) // MSB First
1909 #define I2S_RCR4_SYWD(n) ((uint32_t)(n & 0x1f)<<8) // Sync Width
1910 #define I2S_RCR4_FRSZ(n) ((uint32_t)(n & 0x0f)<<16) // Frame Size
1911 #define I2S0_RCR5 *(volatile uint32_t *)0x4002F094 // SAI Receive Configuration 5 Register
1912 #define I2S_RCR5_FBT(n) ((uint32_t)(n & 0x1f)<<8) // First Bit Shifted
1913 #define I2S_RCR5_W0W(n) ((uint32_t)(n & 0x1f)<<16) // Word 0 Width
1914 #define I2S_RCR5_WNW(n) ((uint32_t)(n & 0x1f)<<24) // Word N Width
1915 #define I2S0_RDR0 *(volatile uint32_t *)0x4002F0A0 // SAI Receive Data Register
1916 #define I2S0_RDR1 *(volatile uint32_t *)0x4002F0A4 // SAI Receive Data Register
1917 #define I2S0_RFR0 *(volatile uint32_t *)0x4002F0C0 // SAI Receive FIFO Register
1918 #define I2S0_RFR1 *(volatile uint32_t *)0x4002F0C4 // SAI Receive FIFO Register
1919 #define I2S_RFR_RFP(n) ((uint32_t)n & 7) // read FIFO pointer
1920 #define I2S_RFR_WFP(n) ((uint32_t)(n & 7)<<16) // write FIFO pointer
1921 #define I2S0_RMR *(volatile uint32_t *)0x4002F0E0 // SAI Receive Mask Register
1922 #define I2S_RMR_RWM(n) ((uint32_t)n & 0xFFFFFFFF)
1923 #define I2S0_MCR *(volatile uint32_t *)0x4002F100 // SAI MCLK Control Register
1924 #define I2S_MCR_DUF ((uint32_t)1<<31) // Divider Update Flag
1925 #define I2S_MCR_MOE ((uint32_t)1<<30) // MCLK Output Enable
1926 #define I2S_MCR_MICS(n) ((uint32_t)(n & 3)<<24) // MCLK Input Clock Select
1927 #define I2S0_MDR *(volatile uint32_t *)0x4002F104 // SAI MCLK Divide Register
1928 #define I2S_MDR_FRACT(n) ((uint32_t)(n & 0xff)<<12) // MCLK Fraction
1929 #define I2S_MDR_DIVIDE(n) ((uint32_t)(n & 0xfff)) // MCLK Divide
1931 // Chapter 47: General-Purpose Input/Output (GPIO)
1932 #define GPIOA_PDOR *(volatile uint32_t *)0x400FF000 // Port Data Output Register
1933 #define GPIOA_PSOR *(volatile uint32_t *)0x400FF004 // Port Set Output Register
1934 #define GPIOA_PCOR *(volatile uint32_t *)0x400FF008 // Port Clear Output Register
1935 #define GPIOA_PTOR *(volatile uint32_t *)0x400FF00C // Port Toggle Output Register
1936 #define GPIOA_PDIR *(volatile uint32_t *)0x400FF010 // Port Data Input Register
1937 #define GPIOA_PDDR *(volatile uint32_t *)0x400FF014 // Port Data Direction Register
1938 #define GPIOB_PDOR *(volatile uint32_t *)0x400FF040 // Port Data Output Register
1939 #define GPIOB_PSOR *(volatile uint32_t *)0x400FF044 // Port Set Output Register
1940 #define GPIOB_PCOR *(volatile uint32_t *)0x400FF048 // Port Clear Output Register
1941 #define GPIOB_PTOR *(volatile uint32_t *)0x400FF04C // Port Toggle Output Register
1942 #define GPIOB_PDIR *(volatile uint32_t *)0x400FF050 // Port Data Input Register
1943 #define GPIOB_PDDR *(volatile uint32_t *)0x400FF054 // Port Data Direction Register
1944 #define GPIOC_PDOR *(volatile uint32_t *)0x400FF080 // Port Data Output Register
1945 #define GPIOC_PSOR *(volatile uint32_t *)0x400FF084 // Port Set Output Register
1946 #define GPIOC_PCOR *(volatile uint32_t *)0x400FF088 // Port Clear Output Register
1947 #define GPIOC_PTOR *(volatile uint32_t *)0x400FF08C // Port Toggle Output Register
1948 #define GPIOC_PDIR *(volatile uint32_t *)0x400FF090 // Port Data Input Register
1949 #define GPIOC_PDDR *(volatile uint32_t *)0x400FF094 // Port Data Direction Register
1950 #define GPIOD_PDOR *(volatile uint32_t *)0x400FF0C0 // Port Data Output Register
1951 #define GPIOD_PSOR *(volatile uint32_t *)0x400FF0C4 // Port Set Output Register
1952 #define GPIOD_PCOR *(volatile uint32_t *)0x400FF0C8 // Port Clear Output Register
1953 #define GPIOD_PTOR *(volatile uint32_t *)0x400FF0CC // Port Toggle Output Register
1954 #define GPIOD_PDIR *(volatile uint32_t *)0x400FF0D0 // Port Data Input Register
1955 #define GPIOD_PDDR *(volatile uint32_t *)0x400FF0D4 // Port Data Direction Register
1956 #define GPIOE_PDOR *(volatile uint32_t *)0x400FF100 // Port Data Output Register
1957 #define GPIOE_PSOR *(volatile uint32_t *)0x400FF104 // Port Set Output Register
1958 #define GPIOE_PCOR *(volatile uint32_t *)0x400FF108 // Port Clear Output Register
1959 #define GPIOE_PTOR *(volatile uint32_t *)0x400FF10C // Port Toggle Output Register
1960 #define GPIOE_PDIR *(volatile uint32_t *)0x400FF110 // Port Data Input Register
1961 #define GPIOE_PDDR *(volatile uint32_t *)0x400FF114 // Port Data Direction Register
1963 // Chapter 48: Touch sense input (TSI)
1964 #define TSI0_GENCS *(volatile uint32_t *)0x40045000 // General Control and Status Register
1965 #define TSI_GENCS_LPCLKS (uint32_t)0x10000000 //
1966 #define TSI_GENCS_LPSCNITV(n) (((n) & 15) << 24) //
1967 #define TSI_GENCS_NSCN(n) (((n) & 31) << 19) //
1968 #define TSI_GENCS_PS(n) (((n) & 7) << 16) //
1969 #define TSI_GENCS_EOSF (uint32_t)0x00008000 //
1970 #define TSI_GENCS_OUTRGF (uint32_t)0x00004000 //
1971 #define TSI_GENCS_EXTERF (uint32_t)0x00002000 //
1972 #define TSI_GENCS_OVRF (uint32_t)0x00001000 //
1973 #define TSI_GENCS_SCNIP (uint32_t)0x00000200 //
1974 #define TSI_GENCS_SWTS (uint32_t)0x00000100 //
1975 #define TSI_GENCS_TSIEN (uint32_t)0x00000080 //
1976 #define TSI_GENCS_TSIIE (uint32_t)0x00000040 //
1977 #define TSI_GENCS_ERIE (uint32_t)0x00000020 //
1978 #define TSI_GENCS_ESOR (uint32_t)0x00000010 //
1979 #define TSI_GENCS_STM (uint32_t)0x00000002 //
1980 #define TSI_GENCS_STPE (uint32_t)0x00000001 //
1981 #define TSI0_SCANC *(volatile uint32_t *)0x40045004 // SCAN Control Register
1982 #define TSI_SCANC_REFCHRG(n) (((n) & 15) << 24) //
1983 #define TSI_SCANC_EXTCHRG(n) (((n) & 7) << 16) //
1984 #define TSI_SCANC_SMOD(n) (((n) & 255) << 8) //
1985 #define TSI_SCANC_AMCLKS(n) (((n) & 3) << 3) //
1986 #define TSI_SCANC_AMPSC(n) (((n) & 7) << 0) //
1987 #define TSI0_PEN *(volatile uint32_t *)0x40045008 // Pin Enable Register
1988 #define TSI0_WUCNTR *(volatile uint32_t *)0x4004500C // Wake-Up Channel Counter Register
1989 #define TSI0_CNTR1 *(volatile uint32_t *)0x40045100 // Counter Register
1990 #define TSI0_CNTR3 *(volatile uint32_t *)0x40045104 // Counter Register
1991 #define TSI0_CNTR5 *(volatile uint32_t *)0x40045108 // Counter Register
1992 #define TSI0_CNTR7 *(volatile uint32_t *)0x4004510C // Counter Register
1993 #define TSI0_CNTR9 *(volatile uint32_t *)0x40045110 // Counter Register
1994 #define TSI0_CNTR11 *(volatile uint32_t *)0x40045114 // Counter Register
1995 #define TSI0_CNTR13 *(volatile uint32_t *)0x40045118 // Counter Register
1996 #define TSI0_CNTR15 *(volatile uint32_t *)0x4004511C // Counter Register
1997 #define TSI0_THRESHOLD *(volatile uint32_t *)0x40045120 // Low Power Channel Threshold Register
1999 // Nested Vectored Interrupt Controller, Table 3-4 & ARMv7 ref, appendix B3.4 (page 750)
2000 #define NVIC_ENABLE_IRQ(n) (*((volatile uint32_t *)0xE000E100 + (n >> 5)) = (1 << (n & 31)))
2001 #define NVIC_DISABLE_IRQ(n) (*((volatile uint32_t *)0xE000E180 + (n >> 5)) = (1 << (n & 31)))
2002 #define NVIC_SET_PENDING(n) (*((volatile uint32_t *)0xE000E200 + (n >> 5)) = (1 << (n & 31)))
2003 #define NVIC_CLEAR_PENDING(n) (*((volatile uint32_t *)0xE000E280 + (n >> 5)) = (1 << (n & 31)))
2005 #define NVIC_ISER0 *(volatile uint32_t *)0xE000E100
2006 #define NVIC_ISER1 *(volatile uint32_t *)0xE000E104
2007 #define NVIC_ICER0 *(volatile uint32_t *)0xE000E180
2008 #define NVIC_ICER1 *(volatile uint32_t *)0xE000E184
2010 // 0 = highest priority
2011 // Cortex-M4: 0,16,32,48,64,80,96,112,128,144,160,176,192,208,224,240
2012 // Cortex-M0: 0,64,128,192
2013 #define NVIC_SET_PRIORITY(irqnum, priority) (*((volatile uint8_t *)0xE000E400 + (irqnum)) = (uint8_t)(priority))
2014 #define NVIC_GET_PRIORITY(irqnum) (*((uint8_t *)0xE000E400 + (irqnum)))
2016 #if defined(__MK20DX128__)
2017 #define IRQ_DMA_CH0 0
2018 #define IRQ_DMA_CH1 1
2019 #define IRQ_DMA_CH2 2
2020 #define IRQ_DMA_CH3 3
2021 #define IRQ_DMA_ERROR 4
2022 #define IRQ_FTFL_COMPLETE 6
2023 #define IRQ_FTFL_COLLISION 7
2024 #define IRQ_LOW_VOLTAGE 8
2029 #define IRQ_I2S0_TX 13
2030 #define IRQ_I2S0_RX 14
2031 #define IRQ_UART0_LON 15
2032 #define IRQ_UART0_STATUS 16
2033 #define IRQ_UART0_ERROR 17
2034 #define IRQ_UART1_STATUS 18
2035 #define IRQ_UART1_ERROR 19
2036 #define IRQ_UART2_STATUS 20
2037 #define IRQ_UART2_ERROR 21
2044 #define IRQ_RTC_ALARM 28
2045 #define IRQ_RTC_SECOND 29
2046 #define IRQ_PIT_CH0 30
2047 #define IRQ_PIT_CH1 31
2048 #define IRQ_PIT_CH2 32
2049 #define IRQ_PIT_CH3 33
2051 #define IRQ_USBOTG 35
2052 #define IRQ_USBDCD 36
2055 #define IRQ_LPTMR 39
2056 #define IRQ_PORTA 40
2057 #define IRQ_PORTB 41
2058 #define IRQ_PORTC 42
2059 #define IRQ_PORTD 43
2060 #define IRQ_PORTE 44
2061 #define IRQ_SOFTWARE 45
2062 #define NVIC_NUM_INTERRUPTS 46
2064 #elif defined(__MK20DX256__)
2065 #define IRQ_DMA_CH0 0
2066 #define IRQ_DMA_CH1 1
2067 #define IRQ_DMA_CH2 2
2068 #define IRQ_DMA_CH3 3
2069 #define IRQ_DMA_CH4 4
2070 #define IRQ_DMA_CH5 5
2071 #define IRQ_DMA_CH6 6
2072 #define IRQ_DMA_CH7 7
2073 #define IRQ_DMA_CH8 8
2074 #define IRQ_DMA_CH9 9
2075 #define IRQ_DMA_CH10 10
2076 #define IRQ_DMA_CH11 11
2077 #define IRQ_DMA_CH12 12
2078 #define IRQ_DMA_CH13 13
2079 #define IRQ_DMA_CH14 14
2080 #define IRQ_DMA_CH15 15
2081 #define IRQ_DMA_ERROR 16
2082 #define IRQ_FTFL_COMPLETE 18
2083 #define IRQ_FTFL_COLLISION 19
2084 #define IRQ_LOW_VOLTAGE 20
2091 #define IRQ_CAN_MESSAGE 29
2092 #define IRQ_CAN_BUS_OFF 30
2093 #define IRQ_CAN_ERROR 31
2094 #define IRQ_CAN_TX_WARN 32
2095 #define IRQ_CAN_RX_WARN 33
2096 #define IRQ_CAN_WAKEUP 34
2097 #define IRQ_I2S0_TX 35
2098 #define IRQ_I2S0_RX 36
2099 #define IRQ_UART0_LON 44
2100 #define IRQ_UART0_STATUS 45
2101 #define IRQ_UART0_ERROR 46
2102 #define IRQ_UART1_STATUS 47
2103 #define IRQ_UART1_ERROR 48
2104 #define IRQ_UART2_STATUS 49
2105 #define IRQ_UART2_ERROR 50
2115 #define IRQ_RTC_ALARM 66
2116 #define IRQ_RTC_SECOND 67
2117 #define IRQ_PIT_CH0 68
2118 #define IRQ_PIT_CH1 69
2119 #define IRQ_PIT_CH2 70
2120 #define IRQ_PIT_CH3 71
2122 #define IRQ_USBOTG 73
2123 #define IRQ_USBDCD 74
2127 #define IRQ_LPTMR 85
2128 #define IRQ_PORTA 87
2129 #define IRQ_PORTB 88
2130 #define IRQ_PORTC 89
2131 #define IRQ_PORTD 90
2132 #define IRQ_PORTE 91
2133 #define IRQ_SOFTWARE 94
2134 #define NVIC_NUM_INTERRUPTS 95
2142 #define __disable_irq() asm volatile("CPSID i");
2143 #define __enable_irq() asm volatile("CPSIE i");
2145 // System Control Space (SCS), ARMv7 ref manual, B3.2, page 708
2146 #define SCB_CPUID *(const uint32_t *)0xE000ED00 // CPUID Base Register
2147 #define SCB_ICSR *(volatile uint32_t *)0xE000ED04 // Interrupt Control and State
2148 #define SCB_ICSR_PENDSTSET (uint32_t)0x04000000
2149 #define SCB_VTOR *(volatile uint32_t *)0xE000ED08 // Vector Table Offset
2150 #define SCB_AIRCR *(volatile uint32_t *)0xE000ED0C // Application Interrupt and Reset Control
2151 #define SCB_SCR *(volatile uint32_t *)0xE000ED10 // System Control Register
2152 #define SCB_CCR *(volatile uint32_t *)0xE000ED14 // Configuration and Control
2153 #define SCB_SHPR1 *(volatile uint32_t *)0xE000ED18 // System Handler Priority Register 1
2154 #define SCB_SHPR2 *(volatile uint32_t *)0xE000ED1C // System Handler Priority Register 2
2155 #define SCB_SHPR3 *(volatile uint32_t *)0xE000ED20 // System Handler Priority Register 3
2156 #define SCB_SHCSR *(volatile uint32_t *)0xE000ED24 // System Handler Control and State
2157 #define SCB_CFSR *(volatile uint32_t *)0xE000ED28 // Configurable Fault Status Register
2158 #define SCB_HFSR *(volatile uint32_t *)0xE000ED2C // HardFault Status
2159 #define SCB_DFSR *(volatile uint32_t *)0xE000ED30 // Debug Fault Status
2160 #define SCB_MMFAR *(volatile uint32_t *)0xE000ED34 // MemManage Fault Address
2162 #define SYST_CSR *(volatile uint32_t *)0xE000E010 // SysTick Control and Status
2163 #define SYST_CSR_COUNTFLAG (uint32_t)0x00010000
2164 #define SYST_CSR_CLKSOURCE (uint32_t)0x00000004
2165 #define SYST_CSR_TICKINT (uint32_t)0x00000002
2166 #define SYST_CSR_ENABLE (uint32_t)0x00000001
2167 #define SYST_RVR *(volatile uint32_t *)0xE000E014 // SysTick Reload Value Register
2168 #define SYST_CVR *(volatile uint32_t *)0xE000E018 // SysTick Current Value Register
2169 #define SYST_CALIB *(const uint32_t *)0xE000E01C // SysTick Calibration Value
2172 #define ARM_DEMCR *(volatile uint32_t *)0xE000EDFC // Debug Exception and Monitor Control
2173 #define ARM_DEMCR_TRCENA (1 << 24) // Enable debugging & monitoring blocks
2174 #define ARM_DWT_CTRL *(volatile uint32_t *)0xE0001000 // DWT control register
2175 #define ARM_DWT_CTRL_CYCCNTENA (1 << 0) // Enable cycle count
2176 #define ARM_DWT_CYCCNT *(volatile uint32_t *)0xE0001004 // Cycle count register
2178 extern int nvic_execution_priority(void);
2180 extern void nmi_isr(void);
2181 extern void hard_fault_isr(void);
2182 extern void memmanage_fault_isr(void);
2183 extern void bus_fault_isr(void);
2184 extern void usage_fault_isr(void);
2185 extern void svcall_isr(void);
2186 extern void debugmonitor_isr(void);
2187 extern void pendablesrvreq_isr(void);
2188 extern void systick_isr(void);
2189 extern void dma_ch0_isr(void);
2190 extern void dma_ch1_isr(void);
2191 extern void dma_ch2_isr(void);
2192 extern void dma_ch3_isr(void);
2193 extern void dma_ch4_isr(void);
2194 extern void dma_ch5_isr(void);
2195 extern void dma_ch6_isr(void);
2196 extern void dma_ch7_isr(void);
2197 extern void dma_ch8_isr(void);
2198 extern void dma_ch9_isr(void);
2199 extern void dma_ch10_isr(void);
2200 extern void dma_ch11_isr(void);
2201 extern void dma_ch12_isr(void);
2202 extern void dma_ch13_isr(void);
2203 extern void dma_ch14_isr(void);
2204 extern void dma_ch15_isr(void);
2205 extern void dma_error_isr(void);
2206 extern void mcm_isr(void);
2207 extern void flash_cmd_isr(void);
2208 extern void flash_error_isr(void);
2209 extern void low_voltage_isr(void);
2210 extern void wakeup_isr(void);
2211 extern void watchdog_isr(void);
2212 extern void i2c0_isr(void);
2213 extern void i2c1_isr(void);
2214 extern void i2c2_isr(void);
2215 extern void spi0_isr(void);
2216 extern void spi1_isr(void);
2217 extern void spi2_isr(void);
2218 extern void sdhc_isr(void);
2219 extern void can0_message_isr(void);
2220 extern void can0_bus_off_isr(void);
2221 extern void can0_error_isr(void);
2222 extern void can0_tx_warn_isr(void);
2223 extern void can0_rx_warn_isr(void);
2224 extern void can0_wakeup_isr(void);
2225 extern void i2s0_tx_isr(void);
2226 extern void i2s0_rx_isr(void);
2227 extern void uart0_lon_isr(void);
2228 extern void uart0_status_isr(void);
2229 extern void uart0_error_isr(void);
2230 extern void uart1_status_isr(void);
2231 extern void uart1_error_isr(void);
2232 extern void uart2_status_isr(void);
2233 extern void uart2_error_isr(void);
2234 extern void uart3_status_isr(void);
2235 extern void uart3_error_isr(void);
2236 extern void uart4_status_isr(void);
2237 extern void uart4_error_isr(void);
2238 extern void uart5_status_isr(void);
2239 extern void uart5_error_isr(void);
2240 extern void adc0_isr(void);
2241 extern void adc1_isr(void);
2242 extern void cmp0_isr(void);
2243 extern void cmp1_isr(void);
2244 extern void cmp2_isr(void);
2245 extern void ftm0_isr(void);
2246 extern void ftm1_isr(void);
2247 extern void ftm2_isr(void);
2248 extern void ftm3_isr(void);
2249 extern void cmt_isr(void);
2250 extern void rtc_alarm_isr(void);
2251 extern void rtc_seconds_isr(void);
2252 extern void pit0_isr(void);
2253 extern void pit1_isr(void);
2254 extern void pit2_isr(void);
2255 extern void pit3_isr(void);
2256 extern void pdb_isr(void);
2257 extern void usb_isr(void);
2258 extern void usb_charge_isr(void);
2259 extern void dac0_isr(void);
2260 extern void dac1_isr(void);
2261 extern void tsi0_isr(void);
2262 extern void mcg_isr(void);
2263 extern void lptmr_isr(void);
2264 extern void porta_isr(void);
2265 extern void portb_isr(void);
2266 extern void portc_isr(void);
2267 extern void portd_isr(void);
2268 extern void porte_isr(void);
2269 extern void software_isr(void);