eeprom crash fix, PacMan2 hack

[picodrive.git] / Pico / MemoryCmn.c

diff --git a/Pico/MemoryCmn.c b/Pico/MemoryCmn.c
index dd705c0..62e6867 100644 (file)
--- a/Pico/MemoryCmn.c
+++ b/Pico/MemoryCmn.c
@@ -8,13 +8,6 @@ typedef unsigned int   u32;
 #define UTYPES_DEFINED
 #endif
 
-#ifdef _ASM_MEMORY_C
-u32 OtherRead16End(u32 a, int realsize);
-#endif
-#ifdef _ASM_CD_MEMORY_C
-static void OtherWrite8End(u32 a,u32 d,int realsize);
-#endif
-
 
 #ifndef _ASM_MEMORY_C
 static
@@ -25,7 +18,8 @@ u8 z80Read8(u32 a)
 
   a&=0x1fff;
 
-  if(!(PicoOpt&4)) {
+  if (!(PicoOpt&POPT_EN_Z80))
+  {
     // Z80 disabled, do some faking
     static u8 zerosent = 0;
     if(a == Pico.m.z80_lastaddr) { // probably polling something
@@ -76,7 +70,8 @@ void z80WriteBusReq(u32 d)
     if (!d)
     {
       // this is for a nasty situation where Z80 was enabled and disabled in the same 68k timeslice (Golden Axe III)
-      if (Pico.m.z80Run) {
+      if ((PicoOpt&POPT_EN_Z80) && Pico.m.z80Run)
+      {
         int lineCycles;
         z80stopCycle = SekCyclesDone();
         if ((Pico.m.z80Run&2) && Pico.m.scanline != -1)
@@ -124,14 +119,18 @@ u32 OtherRead16(u32 a, int realsize)
     goto end;
   }
 
-  if ((a&0xff0000)==0xa00000) {
+  if ((a&0xff0000)==0xa00000)
+  {
+    if (Pico.m.z80Run&1)
+      elprintf(EL_ANOMALY, "68k z80 read with no bus! [%06x] @ %06x", a, SekPc);
     if ((a&0x4000)==0x0000) { d=z80Read8(a); d|=d<<8; goto end; } // Z80 ram (not byteswaped)
     if ((a&0x6000)==0x4000) { // 0x4000-0x5fff, Fudge if disabled
-      if(PicoOpt&1) d=YM2612Read();
+      if(PicoOpt&POPT_EN_FM) d=YM2612Read();
       else d=Pico.m.rotate++&3;
       elprintf(EL_YM2612R, "read ym2612: %02x", d);
       goto end;
     }
+    elprintf(EL_ANOMALY, "68k bad read [%06x]", a);
     d=0xffff;
     goto end;
   }
@@ -146,12 +145,13 @@ static void IoWrite8(u32 a, u32 d)
 {
   a=(a>>1)&0xf;
   // 6 button gamepad: if TH went from 0 to 1, gamepad changes state
-  if(PicoOpt&0x20) {
-    if(a==1) {
+  if (PicoOpt&POPT_6BTN_PAD)
+  {
+    if (a==1) {
       Pico.m.padDelay[0] = 0;
       if(!(Pico.ioports[1]&0x40) && (d&0x40)) Pico.m.padTHPhase[0]++;
     }
-    else if(a==2) {
+    else if (a==2) {
       Pico.m.padDelay[1] = 0;
       if(!(Pico.ioports[2]&0x40) && (d&0x40)) Pico.m.padTHPhase[1]++;
     }
@@ -166,14 +166,26 @@ void OtherWrite8(u32 a,u32 d)
 {
 #if !defined(_ASM_MEMORY_C) || defined(_ASM_MEMORY_C_AMIPS)
   if ((a&0xe700f9)==0xc00011||(a&0xff7ff9)==0xa07f11) { if(PicoOpt&2) SN76496Write(d); return; } // PSG Sound
-  if ((a&0xff4000)==0xa00000)  { if(!(Pico.m.z80Run&1)) Pico.zram[a&0x1fff]=(u8)d; return; } // Z80 ram
+  if ((a&0xff4000)==0xa00000) { // z80 RAM
+    if (!(Pico.m.z80Run&1)) Pico.zram[a&0x1fff]=(u8)d;
+    else {
+      elprintf(EL_ANOMALY, "68k z80 write with no bus! [%06x] %02x @ %06x", a, d, SekPc);
+      SekCyclesBurn(4); // hack?
+    }
+    return;
+  }
   if ((a&0xff6000)==0xa04000)  { if(PicoOpt&1) emustatus|=YM2612Write(a&3, d)&1; return; } // FM Sound
   if ((a&0xffffe0)==0xa10000)  { IoWrite8(a, d); return; } // I/O ports
 #endif
   if (a==0xa11100)             { z80WriteBusReq(d); return; }
   if (a==0xa11200) {
     elprintf(EL_BUSREQ, "write z80Reset: %02x", d);
-    if(!(d&1)) z80_reset();
+    if (!(d&0x1)) { Pico.m.z80_reset = 1; Pico.m.z80Run = 0; YM2612ResetChip(); }
+    else if (Pico.m.z80_reset) {
+      Pico.m.z80_reset = 0;
+      YM2612ResetChip();
+      z80_reset();
+    }
     return;
   }
 #if !defined(_ASM_MEMORY_C) || defined(_ASM_MEMORY_C_AMIPS)
@@ -182,6 +194,7 @@ void OtherWrite8(u32 a,u32 d)
     Pico.m.z80_bank68k>>=1;
     Pico.m.z80_bank68k|=(d&1)<<8;
     Pico.m.z80_bank68k&=0x1ff; // 9 bits and filled in the new top one
+    elprintf(EL_Z80BNK, "z80 bank=%06x", Pico.m.z80_bank68k<<15);
     return;
   }
 #endif
@@ -201,16 +214,30 @@ static
 void OtherWrite16(u32 a,u32 d)
 {
   if (a==0xa11100)            { z80WriteBusReq(d>>8); return; }
-  if (a==0xa11200)            { elprintf(EL_BUSREQ, "write z80reset: %04x", d); if(!(d&0x100)) z80_reset(); return; }
   if ((a&0xffffe0)==0xa10000) { IoWrite8(a, d); return; } // I/O ports
-  if ((a&0xff4000)==0xa00000) { if(!(Pico.m.z80Run&1)) Pico.zram[a&0x1fff]=(u8)(d>>8); return; } // Z80 ram (MSB only)
   if ((a&0xe700f8)==0xc00010||(a&0xff7ff8)==0xa07f10) { if(PicoOpt&2) SN76496Write(d); return; } // PSG Sound
-  if ((a&0xff6000)==0xa04000)  { if(PicoOpt&1) emustatus|=YM2612Write(a&3, d)&1; return; } // FM Sound (??)
+  if ((a&0xff6000)==0xa04000) { if(PicoOpt&1) emustatus|=YM2612Write(a&3, d)&1; return; } // FM Sound (??)
+  if ((a&0xff4000)==0xa00000) { // Z80 ram (MSB only)
+    if (!(Pico.m.z80Run&1)) Pico.zram[a&0x1fff]=(u8)(d>>8);
+    else elprintf(EL_ANOMALY, "68k z80 write with no bus! [%06x] %02x @ %06x", a, d, SekPc);
+    return;
+  }
+  if (a==0xa11200) {
+    elprintf(EL_BUSREQ, "write z80reset: %04x", d);
+    if (!(d&0x100)) { Pico.m.z80_reset = 1; Pico.m.z80Run = 0; YM2612ResetChip(); }
+    else if (Pico.m.z80_reset) {
+      Pico.m.z80_reset = 0;
+      YM2612ResetChip();
+      z80_reset();
+    }
+    return;
+  }
   if ((a&0xff7f00)==0xa06000) // Z80 BANK register
   {
     Pico.m.z80_bank68k>>=1;
     Pico.m.z80_bank68k|=(d&1)<<8;
     Pico.m.z80_bank68k&=0x1ff; // 9 bits and filled in the new top one
+    elprintf(EL_Z80BNK, "z80 bank=%06x", Pico.m.z80_bank68k<<15);
     return;
   }