lowercasing filenames, part1; makefile adjustments
[picodrive.git] / Pico / PicoFrameHints.c
diff --git a/Pico/PicoFrameHints.c b/Pico/PicoFrameHints.c
deleted file mode 100644 (file)
index cc77f5f..0000000
+++ /dev/null
@@ -1,262 +0,0 @@
-// common code for Pico.c and cd/Pico.c
-// (c) Copyright 2007,2008 Grazvydas "notaz" Ignotas
-
-#define CYCLES_M68K_LINE     488 // suitable for both PAL/NTSC
-#define CYCLES_M68K_VINT_LAG  68
-#define CYCLES_M68K_ASD      148
-#define CYCLES_S68K_LINE     795
-#define CYCLES_S68K_ASD      241
-
-// pad delay (for 6 button pads)
-#define PAD_DELAY \
-  if (PicoOpt&POPT_6BTN_PAD) { \
-    if(Pico.m.padDelay[0]++ > 25) Pico.m.padTHPhase[0]=0; \
-    if(Pico.m.padDelay[1]++ > 25) Pico.m.padTHPhase[1]=0; \
-  }
-
-// CPUS_RUN
-#ifndef PICO_CD
-#define CPUS_RUN(m68k_cycles,s68k_cycles) \
-    SekRunM68k(m68k_cycles);
-#else
-#define CPUS_RUN(m68k_cycles,s68k_cycles) \
-{ \
-    if ((PicoOpt&POPT_EN_MCD_PSYNC) && (Pico_mcd->m.busreq&3) == 1) { \
-      SekRunPS(m68k_cycles, s68k_cycles); /* "better/perfect sync" */ \
-    } else { \
-      SekRunM68k(m68k_cycles); \
-      if ((Pico_mcd->m.busreq&3) == 1) /* no busreq/no reset */ \
-        SekRunS68k(s68k_cycles); \
-    } \
-}
-#endif
-
-// Accurate but slower frame which does hints
-static int PicoFrameHints(void)
-{
-  struct PicoVideo *pv=&Pico.video;
-  int lines, y, lines_vis = 224, line_sample, skip, vcnt_wrap;
-  int hint; // Hint counter
-
-  pv->v_counter = Pico.m.scanline = 0;
-
-  if ((PicoOpt&POPT_ALT_RENDERER) && !PicoSkipFrame && (pv->reg[1]&0x40)) { // fast rend., display enabled
-    // draw a frame just after vblank in alternative render mode
-    // yes, this will cause 1 frame lag, but this is inaccurate mode anyway.
-    PicoFrameFull();
-#ifdef DRAW_FINISH_FUNC
-    DRAW_FINISH_FUNC();
-#endif
-    skip = 1;
-  }
-  else skip=PicoSkipFrame;
-
-  if (Pico.m.pal) {
-    line_sample = 68;
-    if (pv->reg[1]&8) lines_vis = 240;
-  } else {
-    line_sample = 93;
-  }
-
-  SekCyclesReset();
-  z80_resetCycles();
-#ifdef PICO_CD
-  SekCyclesResetS68k();
-#endif
-  PsndDacLine = 0;
-
-  pv->status&=~0x88; // clear V-Int, come out of vblank
-
-  hint=pv->reg[10]; // Load H-Int counter
-  //dprintf("-hint: %i", hint);
-
-  // This is to make active scan longer (needed for Double Dragon 2, mainly)
-  CPUS_RUN(CYCLES_M68K_ASD, CYCLES_S68K_ASD);
-
-  for (y = 0; y < lines_vis; y++)
-  {
-    pv->v_counter = Pico.m.scanline = y;
-    if ((pv->reg[12]&6) == 6) { // interlace mode 2
-      pv->v_counter <<= 1;
-      pv->v_counter |= pv->v_counter >> 8;
-      pv->v_counter &= 0xff;
-    }
-
-    // VDP FIFO
-    pv->lwrite_cnt -= 12;
-    if (pv->lwrite_cnt <= 0) {
-      pv->lwrite_cnt=0;
-      Pico.video.status|=0x200;
-    }
-
-    PAD_DELAY
-#ifdef PICO_CD
-    check_cd_dma();
-#endif
-
-    // H-Interrupts:
-    if (--hint < 0) // y <= lines_vis: Comix Zone, Golden Axe
-    {
-      hint=pv->reg[10]; // Reload H-Int counter
-      pv->pending_ints|=0x10;
-      if (pv->reg[0]&0x10) {
-        elprintf(EL_INTS, "hint: @ %06x [%i]", SekPc, SekCycleCnt);
-        SekInterrupt(4);
-      }
-    }
-
-    // decide if we draw this line
-    if (!skip && (PicoOpt & POPT_ALT_RENDERER))
-    {
-      // find the right moment for frame renderer, when display is no longer blanked
-      if ((pv->reg[1]&0x40) || y > 100) {
-        PicoFrameFull();
-#ifdef DRAW_FINISH_FUNC
-        DRAW_FINISH_FUNC();
-#endif
-        skip = 1;
-      }
-    }
-
-#ifndef PICO_CD
-    // get samples from sound chips
-    if (y == 32 && PsndOut)
-      emustatus &= ~1;
-    else if ((y == 224 || y == line_sample) && PsndOut)
-    {
-      if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80))
-        PicoSyncZ80(SekCycleCnt);
-      if (ym2612.dacen && PsndDacLine <= y)
-        PsndDoDAC(y);
-      getSamples(y);
-    }
-#endif
-
-    // Run scanline:
-    if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA());
-    CPUS_RUN(CYCLES_M68K_LINE, CYCLES_S68K_LINE);
-
-#ifdef PICO_CD
-    update_chips();
-#else
-    if (PicoLineHook) PicoLineHook();
-#endif
-  }
-
-  if (!skip)
-  {
-    if (DrawScanline < y)
-      PicoDrawSync(y - 1, 0);
-#ifdef DRAW_FINISH_FUNC
-    DRAW_FINISH_FUNC();
-#endif
-  }
-
-  // V-int line (224 or 240)
-  Pico.m.scanline = y;
-  pv->v_counter = 0xe0; // bad for 240 mode
-  if ((pv->reg[12]&6) == 6) pv->v_counter = 0xc1;
-
-  // VDP FIFO
-  pv->lwrite_cnt=0;
-  Pico.video.status|=0x200;
-
-  memcpy(PicoPadInt, PicoPad, sizeof(PicoPadInt));
-  PAD_DELAY
-#ifdef PICO_CD
-  check_cd_dma();
-#endif
-
-  // Last H-Int:
-  if (--hint < 0)
-  {
-    hint=pv->reg[10]; // Reload H-Int counter
-    pv->pending_ints|=0x10;
-    //printf("rhint: %i @ %06x [%i|%i]\n", hint, SekPc, y, SekCycleCnt);
-    if (pv->reg[0]&0x10) SekInterrupt(4);
-  }
-
-  pv->status|=0x08; // go into vblank
-  pv->pending_ints|=0x20;
-
-  // the following SekRun is there for several reasons:
-  // there must be a delay after vblank bit is set and irq is asserted (Mazin Saga)
-  // also delay between F bit (bit 7) is set in SR and IRQ happens (Ex-Mutants)
-  // also delay between last H-int and V-int (Golden Axe 3)
-  SekRunM68k(CYCLES_M68K_VINT_LAG);
-
-  if (pv->reg[1]&0x20) {
-    elprintf(EL_INTS, "vint: @ %06x [%i]", SekPc, SekCycleCnt);
-    SekInterrupt(6);
-  }
-  if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80)) {
-    PicoSyncZ80(SekCycleCnt);
-    elprintf(EL_INTS, "zint");
-    z80_int();
-  }
-
-  // get samples from sound chips
-#ifndef PICO_CD
-  if (y == 224)
-#endif
-    if (PsndOut)
-    {
-      if (ym2612.dacen && PsndDacLine <= y)
-        PsndDoDAC(y);
-      getSamples(y);
-    }
-
-  // Run scanline:
-  if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA());
-  CPUS_RUN(CYCLES_M68K_LINE - CYCLES_M68K_VINT_LAG - CYCLES_M68K_ASD,
-    CYCLES_S68K_LINE - CYCLES_S68K_ASD);
-
-#ifdef PICO_CD
-  update_chips();
-#else
-  if (PicoLineHook) PicoLineHook();
-#endif
-
-  // PAL line count might actually be 313 according to Steve Snake, but that would complicate things.
-  lines = Pico.m.pal ? 312 : 262;
-  vcnt_wrap = Pico.m.pal ? 0x103 : 0xEB; // based on Gens
-
-  for (y++; y < lines; y++)
-  {
-    pv->v_counter = Pico.m.scanline = y;
-    if (y >= vcnt_wrap)
-      pv->v_counter -= Pico.m.pal ? 56 : 6;
-    if ((pv->reg[12]&6) == 6)
-      pv->v_counter = (pv->v_counter << 1) | 1;
-    pv->v_counter &= 0xff;
-
-    PAD_DELAY
-#ifdef PICO_CD
-    check_cd_dma();
-#endif
-
-    // Run scanline:
-    if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA());
-    CPUS_RUN(CYCLES_M68K_LINE, CYCLES_S68K_LINE);
-
-#ifdef PICO_CD
-    update_chips();
-#else
-    if (PicoLineHook) PicoLineHook();
-#endif
-  }
-
-  // sync z80
-  if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80))
-    PicoSyncZ80(Pico.m.pal ? 151809 : 127671); // cycles adjusted for converter
-  if (PsndOut && ym2612.dacen && PsndDacLine <= lines-1)
-    PsndDoDAC(lines-1);
-
-  timers_cycle();
-
-  return 0;
-}
-
-#undef PAD_DELAY
-#undef CPUS_RUN
-