int type=0,size=0;\r
int sea=0,tea=0;\r
int use=0;\r
+ const char *shiftstr="";\r
\r
// Get source and target EA\r
type=(op>>9)&7; if (type==4 || type>=7) return 1;\r
if (EaCanRead(tea,size)==0) return 1;\r
if (EaCanWrite(tea)==0 || EaAn(tea)) return 1;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,size);\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op, sea|tea); Cycles=4;\r
+ OpStart(op, sea, tea); Cycles=4;\r
\r
- EaCalc(10,0x0000, sea,size,1);\r
- EaRead(10, 10, sea,size,0,1);\r
+ // imm must be read first\r
+ EaCalcReadNoSE(-1,10,sea,size,0);\r
+ EaCalcReadNoSE((type!=6)?11:-1,0,tea,size,0x003f);\r
\r
- EaCalc(11,0x003f, tea,size,1);\r
- EaRead(11, 0, tea,size,0x003f,1);\r
+ if (size<2) shiftstr=(char *)(size?",asl #16":",asl #24");\r
+ if (size<2) ot(" mov r10,r10,asl #%i\n",size?16:24);\r
\r
ot(";@ Do arithmetic:\n");\r
\r
- if (type==0) ot(" orr r1,r0,r10\n");\r
- if (type==1) ot(" and r1,r0,r10\n");\r
- if (type==2) ot(" subs r1,r0,r10 ;@ Defines NZCV\n");\r
- if (type==3) ot(" adds r1,r0,r10 ;@ Defines NZCV\n");\r
- if (type==5) ot(" eor r1,r0,r10\n");\r
- if (type==6) ot(" cmp r0,r10 ;@ Defines NZCV\n");\r
+ if (type==0) ot(" orr r1,r10,r0%s\n",shiftstr);\r
+ if (type==1) ot(" and r1,r10,r0%s\n",shiftstr);\r
+ if (type==2||type==6)\r
+ ot(" rsbs r1,r10,r0%s ;@ Defines NZCV\n",shiftstr);\r
+ if (type==3) ot(" adds r1,r10,r0%s ;@ Defines NZCV\n",shiftstr);\r
+ if (type==5) ot(" eor r1,r10,r0%s\n",shiftstr);\r
\r
if (type<2 || type==5) ot(" adds r1,r1,#0 ;@ Defines NZ, clears CV\n"); // 0,1,5\r
\r
if (type==1 && size>=2 && tea<8) Cycles-=2;\r
}\r
\r
- OpEnd();\r
+ OpEnd(sea,tea);\r
\r
return 0;\r
}\r
if (EaCanWrite(ea) ==0) return 1;\r
if (size == 0 && EaAn(ea) ) return 1;\r
\r
- use=OpBase(op,1);\r
+ use=OpBase(op,size,1);\r
\r
if (num!=8) use|=0x0e00; // If num is not 8, use same handler\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
if (size>0 && (ea&0x38)==0x08) size=2; // addq.w #n,An is also 32-bit\r
\r
- EaCalc(10,0x003f, ea,size,1);\r
- EaRead(10, 0, ea,size,0x003f,1);\r
+ EaCalcReadNoSE(11,0,ea,size,0x003f);\r
\r
shift=32-(8<<size);\r
\r
{\r
int lsr=9-shift;\r
\r
- if (lsr>=0) ot(" mov r2,r8,lsr #%d ;@ Get quick value\n", lsr);\r
- else ot(" mov r2,r8,lsl #%d ;@ Get quick value\n",-lsr);\r
+ ot(" and r2,r8,#0x0e00 ;@ Get quick value\n");\r
+\r
+ if (lsr>=0) sprintf(count,"r2,lsr #%d", lsr);\r
+ else sprintf(count,"r2,lsl #%d", -lsr);\r
\r
- ot(" and r2,r2,#0x%.4x\n",7<<shift);\r
ot("\n");\r
- strcpy(count,"r2");\r
+ }\r
+ else\r
+ {\r
+ sprintf(count,"#0x%.4x",8<<shift);\r
}\r
\r
- if (num==8) sprintf(count,"#0x%.4x",8<<shift);\r
+ if (size<2) ot(" mov r0,r0,asl #%d\n\n",size?16:24);\r
\r
if (type==0) ot(" adds r1,r0,%s\n",count);\r
if (type==1) ot(" subs r1,r0,%s\n",count);\r
if ((ea&0x38)!=0x08) OpGetFlags(type,1);\r
ot("\n");\r
\r
- EaWrite(10, 1, ea,size,0x003f,1);\r
+ EaWrite(11, 1, ea,size,0x003f,1);\r
\r
- OpEnd();\r
+ OpEnd(ea);\r
\r
return 0;\r
}\r
{\r
int use=0;\r
int type=0,size=0,dir=0,rea=0,ea=0;\r
+ const char *asl="";\r
+ const char *strop=0;\r
\r
type=(op>>12)&5;\r
rea =(op>> 9)&7;\r
if (dir && EaCanWrite(ea)==0) return 1;\r
if ((size==0||!(type&1))&&EaAn(ea)) return 1;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,size);\r
use&=~0x0e00; // Use same opcode for Dn\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
OpStart(op,ea); Cycles=4;\r
\r
- ot(";@ Get r10=EA r11=EA value\n");\r
- EaCalc(10,0x003f, ea,size,1);\r
- EaRead(10, 11, ea,size,0x003f,1);\r
- ot(";@ Get r0=Register r1=Register value\n");\r
- EaCalc( 0,0x0e00,rea,size,1);\r
- EaRead( 0, 1,rea,size,0x0e00,1);\r
+ EaCalcReadNoSE(dir?11:-1,0,ea,size,0x003f);\r
+\r
+ EaCalcReadNoSE(dir?-1:11,1,rea,size,0x0e00);\r
\r
ot(";@ Do arithmetic:\n");\r
- if (type==0) ot(" orr ");\r
- if (type==1) ot(" subs ");\r
- if (type==4) ot(" and ");\r
- if (type==5) ot(" adds ");\r
- if (dir) ot("r1,r11,r1\n");\r
- else ot("r1,r1,r11\n");\r
+ if (type==0) strop = "orr";\r
+ if (type==1) strop = (char *) (dir ? "subs" : "rsbs");\r
+ if (type==4) strop = "and";\r
+ if (type==5) strop = "adds";\r
+\r
+ if (size==0) asl=",asl #24";\r
+ if (size==1) asl=",asl #16";\r
+\r
+ if (size<2) ot(" mov r0,r0%s\n",asl);\r
+ ot(" %s r1,r0,r1%s\n",strop,asl);\r
\r
if ((type&1)==0) ot(" adds r1,r1,#0 ;@ Defines NZ, clears CV\n");\r
\r
ot("\n");\r
\r
ot(";@ Save result:\n");\r
- if (dir) EaWrite(10, 1, ea,size,0x003f,1);\r
- else EaWrite( 0, 1,rea,size,0x0e00,1);\r
+ if (size<2) ot(" mov r1,r1,asr #%d\n",size?16:24);\r
+ if (dir) EaWrite(11, 1, ea,size,0x003f,0,0);\r
+ else EaWrite(11, 1,rea,size,0x0e00,0,0);\r
\r
if(rea==ea) {\r
if(ea<8) Cycles=(size>=2)?8:4; else Cycles+=(size>=2)?26:14;\r
}\r
}\r
\r
- OpEnd();\r
+ OpEnd(ea);\r
\r
return 0;\r
}\r
// See if we can do this opcode:\r
if (EaCanRead(ea,1)==0||EaAn(ea)) return 1;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,1);\r
use&=~0x0e00; // Use same for all registers\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
if(type) Cycles=54;\r
else Cycles=sign?158:140;\r
\r
- EaCalc(10,0x003f, ea, 1);\r
- EaRead(10, 10, ea, 1,0x003f);\r
+ EaCalcReadNoSE(-1,0,ea,1,0x003f);\r
+\r
+ EaCalc(11,0x0e00,rea, 2);\r
+ EaRead(11, 2,rea, 2,0x0e00);\r
\r
- EaCalc (0,0x0e00,rea, 2,1);\r
- EaRead (0, 2,rea, 2,0x0e00,1);\r
+ ot(" movs r1,r0,asl #16\n");\r
\r
if (type==0) // div\r
{\r
// the manual says C is always cleared, but neither Musashi nor FAME do that\r
- //ot(" bic r9,r9,#0x20000000 ;@ always clear C\n");\r
- ot(" tst r10,r10\n");\r
+ //ot(" bic r10,r10,#0x20000000 ;@ always clear C\n");\r
ot(" beq divzero%.4x ;@ division by zero\n",op);\r
ot("\n");\r
\r
if (sign)\r
{\r
- ot(" mov r11,#0 ;@ r11 = 1 or 2 if the result is negative\n");\r
- ot(" orrmi r11,r11,#1\n");\r
- ot(" rsbmi r10,r10,#0 ;@ Make r10 positive\n");\r
- ot("\n");\r
+ ot(" mov r12,#0 ;@ r12 = 1 or 2 if the result is negative\n");\r
ot(" tst r2,r2\n");\r
- ot(" orrmi r11,r11,#2\n");\r
+ ot(" orrmi r12,r12,#2\n");\r
ot(" rsbmi r2,r2,#0 ;@ Make r2 positive\n");\r
ot("\n");\r
+ ot(" movs r0,r1,asr #16\n");\r
+ ot(" orrmi r12,r12,#1\n");\r
+ ot(" rsbmi r0,r0,#0 ;@ Make r0 positive\n");\r
+ ot("\n");\r
+ ot(";@ detect the nasty 0x80000000 / -1 situation\n");\r
+ ot(" mov r3,r2,asr #31\n");\r
+ ot(" eors r3,r3,r1,asr #16\n");\r
+ ot(" beq wrendofop%.4x\n",op);\r
}\r
else\r
{\r
- ot(" mov r10,r10,lsl #16 ;@ use only 16 bits of divisor\n");\r
- ot(" mov r10,r10,lsr #16\n");\r
+ ot(" mov r0,r1,lsr #16 ;@ use only 16 bits of divisor\n");\r
}\r
\r
- ot(";@ Divide r2 by r10\n");\r
+ ot("\n");\r
+ ot(";@ Divide r2 by r0\n");\r
ot(" mov r3,#0\n");\r
- ot(" mov r1,r10\n");\r
+ ot(" mov r1,r0\n");\r
ot("\n");\r
ot(";@ Shift up divisor till it's just less than numerator\n");\r
ot("Shift%.4x%s\n",op,ms?"":":");\r
ot(" cmp r2,r1\n");\r
ot(" adc r3,r3,r3 ;@ Double r3 and add 1 if carry set\n");\r
ot(" subcs r2,r2,r1\n");\r
- ot(" teq r1,r10\n");\r
+ ot(" teq r1,r0\n");\r
ot(" movne r1,r1,lsr #1\n");\r
ot(" bne Divide%.4x\n",op);\r
ot("\n");\r
if (sign)\r
{\r
// sign correction\r
- ot(" and r1,r11,#1\n");\r
- ot(" teq r1,r11,lsr #1\n");\r
+ ot(" and r1,r12,#1\n");\r
+ ot(" teq r1,r12,lsr #1\n");\r
ot(" rsbne r3,r3,#0 ;@ negate if quotient is negative\n");\r
- ot(" tst r11,#2\n");\r
+ ot(" tst r12,#2\n");\r
ot(" rsbne r2,r2,#0 ;@ negate the remainder if divident was negative\n");\r
ot("\n");\r
\r
// signed overflow check\r
ot(" mov r1,r3,asl #16\n");\r
ot(" cmp r3,r1,asr #16 ;@ signed overflow?\n");\r
- ot(" orrne r9,r9,#0x10000000 ;@ set overflow flag\n");\r
+ ot(" orrne r10,r10,#0x10000000 ;@ set overflow flag\n");\r
ot(" bne endofop%.4x ;@ overflow!\n",op);\r
+ ot("\n");\r
+ ot("wrendofop%.4x%s\n",op,ms?"":":");\r
}\r
else\r
{\r
// overflow check\r
ot(" movs r1,r3,lsr #16 ;@ check for overflow condition\n");\r
- ot(" orrne r9,r9,#0x10000000 ;@ set overflow flag\n");\r
+ ot(" orrne r10,r10,#0x10000000 ;@ set overflow flag\n");\r
ot(" bne endofop%.4x ;@ overflow!\n",op);\r
+ ot("\n");\r
}\r
\r
ot(" mov r1,r3,lsl #16 ;@ Clip to 16-bits\n");\r
\r
if (type==1)\r
{\r
- char *shift="asr";\r
-\r
ot(";@ Get 16-bit signs right:\n");\r
- if (sign==0) { ot(" mov r10,r10,lsl #16\n"); shift="lsr"; }\r
+ ot(" mov r0,r1,%s #16\n",sign?"asr":"lsr");\r
ot(" mov r2,r2,lsl #16\n");\r
-\r
- if (sign==0) ot(" mov r10,r10,lsr #16\n");\r
- ot(" mov r2,r2,%s #16\n",shift);\r
+ ot(" mov r2,r2,%s #16\n",sign?"asr":"lsr");\r
ot("\n");\r
\r
- ot(" mul r1,r2,r10\n");\r
+ ot(" mul r1,r2,r0\n");\r
ot(" adds r1,r1,#0 ;@ Defines NZ, clears CV\n");\r
OpGetFlags(0,0);\r
}\r
ot("\n");\r
\r
- EaWrite(0, 1,rea, 2,0x0e00,1);\r
+ EaWrite(11, 1,rea, 2,0x0e00,1);\r
\r
- ot("endofop%.4x%s\n",op,ms?"":":");\r
- OpEnd();\r
+ if (type==0) ot("endofop%.4x%s\n",op,ms?"":":");\r
+ OpEnd(ea);\r
\r
- ot("divzero%.4x%s\n",op,ms?"":":");\r
- ot(" mov r0,#0x14 ;@ Divide by zero\n");\r
- ot(" bl Exception\n");\r
- Cycles+=38;\r
- OpEnd();\r
- ot("\n");\r
+ if (type==0) // div\r
+ {\r
+ ot("divzero%.4x%s\n",op,ms?"":":");\r
+ ot(" mov r0,#5 ;@ Divide by zero\n");\r
+ ot(" bl Exception\n");\r
+ Cycles+=38;\r
+ OpEnd(ea);\r
+ ot("\n");\r
+ }\r
\r
return 0;\r
}\r
int GetXBit(int subtract)\r
{\r
ot(";@ Get X bit:\n");\r
- ot(" ldrb r2,[r7,#0x45]\n");\r
- if (subtract) ot(" mvn r2,r2,lsl #28 ;@ Invert it\n");\r
- else ot(" mov r2,r2,lsl #28\n");\r
+ ot(" ldr r2,[r7,#0x4c]\n");\r
+ if (subtract) ot(" mvn r2,r2 ;@ Invert it\n");\r
ot(" msr cpsr_flg,r2 ;@ Get into Carry\n");\r
ot("\n");\r
return 0;\r
int OpAbcd(int op)\r
{\r
int use=0;\r
- int type=0,sea=0,addr=0,dea=0;\r
+ int type=0,sea=0,mem=0,dea=0;\r
\r
type=(op>>14)&1; // sbcd/abcd\r
dea =(op>> 9)&7;\r
- addr=(op>> 3)&1;\r
+ mem =(op>> 3)&1;\r
sea = op &7;\r
\r
- if (addr) { sea|=0x20; dea|=0x20; }\r
+ if (mem) { sea|=0x20; dea|=0x20; }\r
\r
use=op&~0x0e07; // Use same opcode for all registers..\r
- if (sea==0x27||dea==0x27) use=op; // ..except -(a7)\r
+ if (sea==0x27) use|=0x0007; // ___x.b -(a7)\r
+ if (dea==0x27) use|=0x0e00; // ___x.b -(a7)\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op,sea|dea); Cycles=6;\r
+ OpStart(op,sea,dea); Cycles=6;\r
\r
- EaCalc( 0,0x0007, sea,0,1);\r
- EaRead( 0, 10, sea,0,0x0007,1);\r
- EaCalc(11,0x0e00, dea,0,1);\r
- EaRead(11, 1, dea,0,0x0e00,1);\r
+ if (mem)\r
+ {\r
+ ot(";@ Get src/dest EA vals\n");\r
+ EaCalc (0,0x000f, sea,0,1);\r
+ EaRead (0, 6, sea,0,0x000f,1);\r
+ EaCalcReadNoSE(11,0,dea,0,0x0e00);\r
+ }\r
+ else\r
+ {\r
+ ot(";@ Get src/dest reg vals\n");\r
+ EaCalcReadNoSE(-1,6,sea,0,0x0007);\r
+ EaCalcReadNoSE(11,0,dea,0,0x0e00);\r
+ ot(" mov r6,r6,asl #24\n");\r
+ }\r
+ ot(" mov r1,r0,asl #24\n\n");\r
\r
- ot(" bic r9,r9,#0xb1000000 ;@ clear all flags except old Z\n");\r
+ ot(" bic r10,r10,#0xb1000000 ;@ clear all flags except old Z\n");\r
\r
if (type)\r
{\r
- ot(" ldrb r0,[r7,#0x45] ;@ Get X bit\n");\r
+ ot(" ldr r0,[r7,#0x4c] ;@ Get X bit\n");\r
ot(" mov r3,#0x00f00000\n");\r
ot(" and r2,r3,r1,lsr #4\n");\r
- ot(" tst r0,#2\n");\r
- ot(" and r0,r3,r10,lsr #4\n");\r
+ ot(" tst r0,#0x20000000\n");\r
+ ot(" and r0,r3,r6,lsr #4\n");\r
ot(" add r0,r0,r2\n");\r
ot(" addne r0,r0,#0x00100000\n");\r
// ot(" tst r0,#0x00800000\n");\r
-// ot(" orreq r9,r9,#0x01000000 ;@ Undefined V behavior\n");\r
+// ot(" orreq r10,r10,#0x01000000 ;@ Undefined V behavior\n");\r
ot(" cmp r0,#0x00900000\n");\r
ot(" addhi r0,r0,#0x00600000 ;@ Decimal adjust units\n");\r
\r
ot(" mov r2,r1,lsr #28\n");\r
ot(" add r0,r0,r2,lsl #24\n");\r
- ot(" mov r2,r10,lsr #28\n");\r
+ ot(" mov r2,r6,lsr #28\n");\r
ot(" add r0,r0,r2,lsl #24\n");\r
ot(" cmp r0,#0x09900000\n");\r
- ot(" orrhi r9,r9,#0x20000000 ;@ C\n");\r
+ ot(" orrhi r10,r10,#0x20000000 ;@ C\n");\r
ot(" subhi r0,r0,#0x0a000000\n");\r
-// ot(" and r3,r9,r0,lsr #3 ;@ Undefined V behavior part II\n");\r
-// ot(" orr r9,r9,r3,lsl #4 ;@ V\n");\r
+// ot(" and r3,r10,r0,lsr #3 ;@ Undefined V behavior part II\n");\r
+// ot(" orr r10,r10,r3,lsl #4 ;@ V\n");\r
ot(" movs r0,r0,lsl #4\n");\r
- ot(" orrmi r9,r9,#0x90000000 ;@ Undefined N+V behavior\n"); // this is what Musashi really does\r
- ot(" bicne r9,r9,#0x40000000 ;@ Z flag\n");\r
+ ot(" orrmi r10,r10,#0x90000000 ;@ Undefined N+V behavior\n"); // this is what Musashi really does\r
+ ot(" bicne r10,r10,#0x40000000 ;@ Z flag\n");\r
}\r
else\r
{\r
- ot(" ldrb r0,[r7,#0x45] ;@ Get X bit\n");\r
+ ot(" ldr r0,[r7,#0x4c] ;@ Get X bit\n");\r
ot(" mov r3,#0x00f00000\n");\r
- ot(" and r2,r3,r10,lsr #4\n");\r
- ot(" tst r0,#2\n");\r
+ ot(" and r2,r3,r6,lsr #4\n");\r
+ ot(" tst r0,#0x20000000\n");\r
ot(" and r0,r3,r1,lsr #4\n");\r
ot(" sub r0,r0,r2\n");\r
ot(" subne r0,r0,#0x00100000\n");\r
// ot(" tst r0,#0x00800000\n");\r
-// ot(" orreq r9,r9,#0x01000000 ;@ Undefined V behavior\n");\r
+// ot(" orreq r10,r10,#0x01000000 ;@ Undefined V behavior\n");\r
ot(" cmp r0,#0x00900000\n");\r
ot(" subhi r0,r0,#0x00600000 ;@ Decimal adjust units\n");\r
\r
ot(" mov r2,r1,lsr #28\n");\r
ot(" add r0,r0,r2,lsl #24\n");\r
- ot(" mov r2,r10,lsr #28\n");\r
+ ot(" mov r2,r6,lsr #28\n");\r
ot(" sub r0,r0,r2,lsl #24\n");\r
ot(" cmp r0,#0x09900000\n");\r
- ot(" orrhi r9,r9,#0xa0000000 ;@ N and C\n");\r
+ ot(" orrhi r10,r10,#0xa0000000 ;@ N and C\n");\r
ot(" addhi r0,r0,#0x0a000000\n");\r
-// ot(" and r3,r9,r0,lsr #3 ;@ Undefined V behavior part II\n");\r
-// ot(" orr r9,r9,r3,lsl #4 ;@ V\n");\r
+// ot(" and r3,r10,r0,lsr #3 ;@ Undefined V behavior part II\n");\r
+// ot(" orr r10,r10,r3,lsl #4 ;@ V\n");\r
ot(" movs r0,r0,lsl #4\n");\r
-// ot(" orrmi r9,r9,#0x80000000 ;@ Undefined N behavior\n");\r
- ot(" bicne r9,r9,#0x40000000 ;@ Z flag\n");\r
+// ot(" orrmi r10,r10,#0x80000000 ;@ Undefined N behavior\n");\r
+ ot(" bicne r10,r10,#0x40000000 ;@ Z flag\n");\r
}\r
\r
- ot(" mov r2,r9,lsr #28\n");\r
- ot(" strb r2,[r7,#0x45] ;@ Save X bit\n");\r
+ ot(" str r10,[r7,#0x4c] ;@ Save X bit\n");\r
+ ot("\n");\r
\r
EaWrite(11, 0, dea,0,0x0e00,1);\r
- OpEnd();\r
+\r
+ ot(" ldr r6,[r7,#0x54]\n");\r
+ OpEnd(sea,dea);\r
\r
return 0;\r
}\r
\r
-// 01008000 00eeeeee - nbcd <ea>\r
+// 01001000 00eeeeee - nbcd <ea>\r
int OpNbcd(int op)\r
{\r
int use=0;\r
\r
if(EaCanWrite(ea)==0||EaAn(ea)) return 1;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,0);\r
if(op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
OpStart(op,ea); Cycles=6;\r
if(ea >= 8) Cycles+=2;\r
\r
- EaCalc(10,0x3f, ea,0,1);\r
- EaRead(10, 0, ea,0,0x3f,1);\r
+ EaCalcReadNoSE(6,0,ea,0,0x003f);\r
\r
// this is rewrite of Musashi's code\r
- ot(" ldrb r2,[r7,#0x45]\n");\r
- ot(" tst r2,#2\n");\r
- ot(" mov r2,r0\n");\r
- ot(" addne r2,r0,#0x01000000 ;@ add X\n");\r
- ot(" rsbs r1,r2,#0x9a000000 ;@ do arithmetic\n");\r
-\r
- ot(" bic r9,r9,#0xb0000000 ;@ clear all flags, except Z\n");\r
- ot(" orrmi r9,r9,#0x80000000 ;@ N\n");\r
- ot(" cmp r1,#0x9a000000\n");\r
+ ot(" ldr r2,[r7,#0x4c]\n");\r
+ ot(" bic r10,r10,#0xb0000000 ;@ clear all flags, except Z\n");\r
+ ot(" mov r0,r0,asl #24\n");\r
+ ot(" and r2,r2,#0x20000000\n");\r
+ ot(" add r2,r0,r2,lsr #5 ;@ add X\n");\r
+ ot(" rsb r11,r2,#0x9a000000 ;@ do arithmetic\n");\r
+\r
+ ot(" cmp r11,#0x9a000000\n");\r
ot(" beq finish%.4x\n",op);\r
ot("\n");\r
\r
- ot(" mvn r3,r9,lsr #3 ;@ Undefined V behavior\n",op);\r
- ot(" and r2,r1,#0x0f000000\n");\r
+ ot(" mvn r3,r11,lsr #31 ;@ Undefined V behavior\n",op);\r
+ ot(" and r2,r11,#0x0f000000\n");\r
ot(" cmp r2,#0x0a000000\n");\r
- ot(" andeq r1,r1,#0xf0000000\n");\r
- ot(" addeq r1,r1,#0x10000000\n");\r
- ot(" and r3,r3,r1,lsr #3 ;@ Undefined V behavior part II\n",op);\r
- ot(" tst r1,r1\n");\r
- ot(" orr r9,r9,r3 ;@ save V\n",op);\r
- ot(" bicne r9,r9,#0x40000000 ;@ Z\n");\r
- ot(" orr r9,r9,#0x20000000 ;@ C\n");\r
+ ot(" andeq r11,r11,#0xf0000000\n");\r
+ ot(" addeq r11,r11,#0x10000000\n");\r
+ ot(" and r3,r3,r11,lsr #31 ;@ Undefined V behavior part II\n",op);\r
+ ot(" movs r1,r11,asr #24\n");\r
+ ot(" bicne r10,r10,#0x40000000 ;@ Z\n");\r
+ ot(" orr r10,r10,r3,lsl #28 ;@ save V\n",op);\r
+ ot(" orr r10,r10,#0x20000000 ;@ C\n");\r
ot("\n");\r
\r
- EaWrite(10, 1, ea,0,0x3f,1);\r
+ EaWrite(6, 1, ea,0,0x3f,0,0);\r
\r
ot("finish%.4x%s\n",op,ms?"":":");\r
- ot(" mov r2,r9,lsr #28\n");\r
- ot(" strb r2, [r7,#0x45]\n");\r
+ ot(" tst r11,r11\n");\r
+ ot(" orrmi r10,r10,#0x80000000 ;@ N\n");\r
+ ot(" str r10,[r7,#0x4c] ;@ Save X\n");\r
+ ot("\n");\r
\r
- OpEnd();\r
+ ot(" ldr r6,[r7,#0x54]\n");\r
+ OpEnd(ea);\r
\r
return 0;\r
}\r
{\r
int use=0;\r
int type=0,size=0,sea=0,dea=0;\r
+ const char *asr="";\r
\r
// Suba/Cmpa/Adda/(invalid):\r
type=(op>>13)&3; if (type>=3) return 1;\r
// See if we can do this opcode:\r
if (EaCanRead(sea,size)==0) return 1;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,size);\r
use&=~0x0e00; // Use same opcode for An\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
if(size==2&&(sea<0x10||sea==0x3c)) Cycles+=2;\r
if(type==1) Cycles=6;\r
\r
- \r
- EaCalc ( 0,0x003f, sea,size);\r
- EaRead ( 0, 10, sea,size,0x003f);\r
+ // EA calculation order defines how situations like suba.w (A0)+, A0 get handled.\r
+ // different emus act differently in this situation, I couldn't fugure which is right behaviour.\r
+ //if (type == 1)\r
+ {\r
+ EaCalcReadNoSE(-1,0,sea,size,0x003f);\r
+ EaCalcReadNoSE(type!=1?11:-1,1,dea,2,0x0e00);\r
+ }\r
+#if 0\r
+ else\r
+ {\r
+ EaCalcReadNoSE(type!=1?11:-1,1,dea,2,0x0e00);\r
+ EaCalcReadNoSE(-1,0,sea,size,0x003f);\r
+ }\r
+#endif\r
\r
- EaCalc ( 0,0x0e00, dea,2,1);\r
- EaRead ( 0, 1, dea,2,0x0e00);\r
+ if (size<2) ot(" mov r0,r0,asl #%d\n\n",size?16:24);\r
+ if (size<2) asr=(char *)(size?",asr #16":",asr #24");\r
\r
- if (type==0) ot(" sub r1,r1,r10\n");\r
- if (type==1) ot(" cmp r1,r10 ;@ Defines NZCV\n");\r
+ if (type==0) ot(" sub r1,r1,r0%s\n",asr);\r
+ if (type==1) ot(" cmp r1,r0%s ;@ Defines NZCV\n",asr);\r
if (type==1) OpGetFlags(1,0); // Get Cmp flags\r
- if (type==2) ot(" add r1,r1,r10\n");\r
+ if (type==2) ot(" add r1,r1,r0%s\n",asr);\r
ot("\n");\r
- \r
- if (type!=1) EaWrite( 0, 1, dea,2,0x0e00,1);\r
\r
- OpEnd();\r
+ if (type!=1) EaWrite(11, 1, dea,2,0x0e00);\r
+\r
+ OpEnd(sea);\r
\r
return 0;\r
}\r
{\r
int use=0;\r
int type=0,size=0,dea=0,sea=0,mem=0;\r
+ const char *asl="";\r
\r
- type=(op>>12)&5;\r
+ type=(op>>14)&1;\r
dea =(op>> 9)&7;\r
size=(op>> 6)&3; if (size>=3) return 1;\r
sea = op&7;\r
if (EaCanRead(sea,size)==0) return 1;\r
if (EaCanWrite(dea)==0) return 1;\r
\r
- if(mem) { sea+=0x20; dea+=0x20; }\r
+ if (mem) { sea+=0x20; dea+=0x20; }\r
\r
use=op&~0x0e07; // Use same opcode for Dn\r
- if (size==0&&(sea==0x27||dea==0x27)) use=op; // ___x.b -(a7)\r
+ if (size==0&&sea==0x27) use|=0x0007; // ___x.b -(a7)\r
+ if (size==0&&dea==0x27) use|=0x0e00; // ___x.b -(a7)\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op,sea|dea); Cycles=4;\r
+ OpStart(op,sea,dea); Cycles=4;\r
if(size>=2) Cycles+=4;\r
if(sea>=0x10) Cycles+=2;\r
\r
- ot(";@ Get r10=EA r11=EA value\n");\r
- EaCalc( 0,0x0007,sea,size,1);\r
- EaRead( 0, 11,sea,size,0x0007,1);\r
- ot(";@ Get r0=Register r1=Register value\n");\r
- EaCalc( 0,0x0e00,dea,size,1);\r
- EaRead( 0, 1,dea,size,0x0e00,1);\r
+ if (mem)\r
+ {\r
+ ot(";@ Get src/dest EA vals\n");\r
+ EaCalc (0,0x000f, sea,size,1);\r
+ EaRead (0, 6, sea,size,0x000f,1);\r
+ EaCalcReadNoSE(11,0,dea,size,0x0e00);\r
+ }\r
+ else\r
+ {\r
+ ot(";@ Get src/dest reg vals\n");\r
+ EaCalcReadNoSE(-1,6,sea,size,0x0007);\r
+ EaCalcReadNoSE(11,0,dea,size,0x0e00);\r
+ if (size<2) ot(" mov r6,r6,asl #%d\n\n",size?16:24);\r
+ }\r
+\r
+ if (size<2) asl=(char *)(size?",asl #16":",asl #24");\r
\r
ot(";@ Do arithmetic:\n");\r
- GetXBit(type==1);\r
+ GetXBit(type==0);\r
\r
- if (type==5 && size<2)\r
+ if (type==1 && size<2)\r
{\r
ot(";@ Make sure the carry bit will tip the balance:\n");\r
ot(" mvn r2,#0\n");\r
- ot(" orr r11,r11,r2,lsr #%i\n",(size==0)?8:16);\r
+ ot(" orr r6,r6,r2,lsr #%i\n",(size==0)?8:16);\r
ot("\n");\r
}\r
\r
- if (type==1) ot(" sbcs r1,r1,r11\n");\r
- if (type==5) ot(" adcs r1,r1,r11\n");\r
- ot(" orr r3,r9,#0xb0000000 ;@ for old Z\n");\r
- OpGetFlags(type==1,1,0); // subtract\r
+ if (type==0) ot(" rscs r1,r6,r0%s\n",asl);\r
+ if (type==1) ot(" adcs r1,r6,r0%s\n",asl);\r
+ ot(" orr r3,r10,#0xb0000000 ;@ for old Z\n");\r
+ OpGetFlags(type==0,1,0); // subtract\r
if (size<2) {\r
ot(" movs r2,r1,lsr #%i\n", size?16:24);\r
- ot(" orreq r9,r9,#0x40000000 ;@ add potentially missed Z\n");\r
+ ot(" orreq r10,r10,#0x40000000 ;@ add potentially missed Z\n");\r
}\r
- ot(" andeq r9,r9,r3 ;@ fix Z\n");\r
+ ot(" andeq r10,r10,r3 ;@ fix Z\n");\r
ot("\n");\r
\r
ot(";@ Save result:\n");\r
- EaWrite( 0, 1, dea,size,0x0e00,1);\r
+ EaWrite(11, 1, dea,size,0x0e00,1);\r
\r
- OpEnd();\r
+ ot(" ldr r6,[r7,#0x54]\n");\r
+ OpEnd(sea,dea);\r
\r
return 0;\r
}\r
{\r
int rea=0,eor=0;\r
int size=0,ea=0,use=0;\r
+ const char *asl="";\r
\r
// Get EA and register EA\r
rea=(op>>9)&7;\r
if (eor && EaCanWrite(ea)==0) return 1;\r
if (EaAn(ea)&&(eor||size==0)) return 1;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,size);\r
use&=~0x0e00; // Use 1 handler for register d0-7\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
if(size>=2) Cycles+=2;\r
}\r
\r
- ot(";@ Get EA into r10 and value into r0:\n");\r
- EaCalc (10,0x003f, ea,size,1);\r
- EaRead (10, 0, ea,size,0x003f,1);\r
+ ot(";@ Get EA into r11 and value into r0:\n");\r
+ EaCalcReadNoSE(eor?11:-1,0,ea,size,0x003f);\r
\r
ot(";@ Get register operand into r1:\n");\r
- EaCalc (1, 0x0e00, rea,size,1);\r
- EaRead (1, 1, rea,size,0x0e00,1);\r
+ EaCalcReadNoSE(-1,1,rea,size,0x0e00);\r
+\r
+ if (size<2) ot(" mov r0,r0,asl #%d\n\n",size?16:24);\r
+ if (size<2) asl=(char *)(size?",asl #16":",asl #24");\r
\r
ot(";@ Do arithmetic:\n");\r
- if (eor==0) ot(" cmp r1,r0\n");\r
+ if (eor==0) ot(" rsbs r1,r0,r1%s\n",asl);\r
if (eor)\r
{\r
- ot(" eor r1,r0,r1\n");\r
+ ot(" eor r1,r0,r1%s\n",asl);\r
ot(" adds r1,r1,#0 ;@ Defines NZ, clears CV\n");\r
}\r
\r
OpGetFlags(eor==0,0); // Cmp like subtract\r
ot("\n");\r
\r
- if (eor) EaWrite(10, 1,ea,size,0x003f,1);\r
+ if (eor) EaWrite(11, 1,ea,size,0x003f,1);\r
\r
- OpEnd();\r
+ OpEnd(ea);\r
return 0;\r
}\r
\r
int OpCmpm(int op)\r
{\r
int size=0,sea=0,dea=0,use=0;\r
+ const char *asl="";\r
\r
// get size, get EAs\r
size=(op>>6)&3; if (size>=3) return 1;\r
dea=(op>>9)&0x3f;\r
\r
use=op&~0x0e07; // Use 1 handler for all registers..\r
- if (size==0&&(sea==0x1f||dea==0x1f)) use=op; // ..except (a7)+\r
+ if (size==0&&sea==0x1f) use|=0x0007; // ..except (a7)+\r
+ if (size==0&&dea==0x1f) use|=0x0e00;\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
OpStart(op,sea); Cycles=4;\r
\r
- ot(";@ Get src operand into r10:\n");\r
- EaCalc (0,0x000f, sea,size,1);\r
- EaRead (0, 10, sea,size,0x000f,1);\r
+ ot(";@ Get src operand into r11:\n");\r
+ EaCalc (0,0x0007, sea,size,1);\r
+ EaRead (0, 11, sea,size,0x0007,1);\r
\r
ot(";@ Get dst operand into r0:\n");\r
- EaCalc (0,0x1e00, dea,size,1);\r
- EaRead (0, 0, dea,size,0x1e00,1);\r
+ EaCalcReadNoSE(-1,0,dea,size,0x0e00);\r
\r
- ot(" cmp r0,r10\n");\r
+ if (size<2) asl=(char *)(size?",asl #16":",asl #24");\r
+\r
+ ot(" rsbs r0,r11,r0%s\n",asl);\r
OpGetFlags(1,0); // Cmp like subtract\r
+ ot("\n");\r
\r
- OpEnd();\r
+ OpEnd(sea);\r
return 0;\r
}\r
\r
// See if we can do this opcode:\r
if (EaCanRead(ea,size)==0) return 1;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,size);\r
use&=~0x0e00; // Use 1 handler for register d0-7\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
OpStart(op,ea); Cycles=10;\r
\r
- ot(";@ Get EA into r10 and value into r0:\n");\r
- EaCalc (10,0x003f, ea,size,1);\r
- EaRead (10, 0, ea,size,0x003f,1);\r
+ ot(";@ Get value into r0:\n");\r
+ EaCalcReadNoSE(-1,0,ea,size,0x003f);\r
\r
ot(";@ Get register operand into r1:\n");\r
- EaCalc (1, 0x0e00, rea,size,1);\r
- EaRead (1, 1, rea,size,0x0e00,1);\r
+ EaCalcReadNoSE(-1,1,rea,size,0x0e00);\r
+\r
+ if (size<2) ot(" mov r0,r0,asl #%d\n",size?16:24);\r
+ if (size<2) ot(" mov r1,r1,asl #%d\n\n",size?16:24);\r
\r
ot(";@ get flags, including undocumented ones\n");\r
- ot(" and r3,r9,#0x80000000\n");\r
+ ot(" and r3,r10,#0x80000000\n");\r
ot(" adds r1,r1,#0 ;@ Defines NZ, clears CV\n");\r
OpGetFlags(0,0);\r
\r
ot(" bmi chktrap%.4x\n",op);\r
\r
ot(";@ Do arithmetic:\n");\r
+ ot(" bic r10,r10,#0x80000000 ;@ N\n");\r
ot(" cmp r1,r0\n");\r
- ot(" bicgt r9,r9,#0x80000000 ;@ N\n");\r
ot(" bgt chktrap%.4x\n",op);\r
\r
ot(";@ old N remains\n");\r
- ot(" bic r9,r9,#0x80000000 ;@ N\n");\r
- ot(" orr r9,r9,r3\n");\r
- OpEnd();\r
+ ot(" orr r10,r10,r3\n");\r
+ OpEnd(ea);\r
\r
ot("chktrap%.4x%s ;@ CHK exception:\n",op,ms?"":":");\r
- ot(" mov r0,#0x18\n");\r
+ ot(" mov r0,#6\n");\r
ot(" bl Exception\n");\r
Cycles+=40;\r
- OpEnd();\r
+ OpEnd(ea);\r
\r
return 0;\r
}\r