fixed some portability issues
[picodrive.git] / cpu / Cyclone / OpBranch.cpp
index c24c769..d29ed03 100644 (file)
@@ -1,20 +1,15 @@
 \r
 #include "app.h"\r
 \r
-static void CheckPc(int reg)\r
+// in/out address in r0, trashes all temp regs\r
+static void CheckPc(void)\r
 {\r
 #if USE_CHECKPC_CALLBACK\r
-  ot(";@ Check Memory Base+pc (r4)\n");\r
-  if (reg != 0)\r
-    ot("  mov r0,r%i\n", reg);\r
+  ot(";@ Check Memory Base+pc\n");\r
   ot("  mov lr,pc\n");\r
   ot("  ldr pc,[r7,#0x64] ;@ Call checkpc()\n");\r
-  ot("  mov r4,r0\n");\r
-#else\r
-  if (reg != 4)\r
-    ot("  mov r4,r%i\n", reg);\r
-#endif\r
   ot("\n");\r
+#endif\r
 }\r
 \r
 // Push 32-bit value in r1 - trashes r0-r3,r12,lr\r
@@ -62,7 +57,12 @@ static void PopPc()
   MemHandler(0,2);\r
   ot("  add r0,r0,r10 ;@ Memory Base+PC\n");\r
   ot("\n");\r
-  CheckPc(0);\r
+  CheckPc();\r
+#if EMULATE_ADDRESS_ERRORS_JUMP\r
+  ot("  mov r4,r0\n");\r
+#else\r
+  ot("  bic r4,r0,#1\n");\r
+#endif\r
 }\r
 \r
 int OpTrap(int op)\r
@@ -74,8 +74,7 @@ int OpTrap(int op)
 \r
   OpStart(op,0x10);\r
   ot("  and r0,r8,#0xf ;@ Get trap number\n");\r
-  ot("  orr r0,r0,#0x20\n");\r
-  ot("  mov r0,r0,asl #2\n");\r
+  ot("  orr r0,r0,#0x20 ;@ 32+n\n");\r
   ot("  bl Exception\n");\r
   ot("\n");\r
 \r
@@ -158,11 +157,12 @@ int OpUnlk(int op)
 }\r
 \r
 // --------------------- Opcodes 0x4e70+ ---------------------\r
+// 01001110 01110ttt\r
 int Op4E70(int op)\r
 {\r
   int type=0;\r
 \r
-  type=op&7; // 01001110 01110ttt, reset/nop/stop/rte/rtd/rts/trapv/rtr\r
+  type=op&7; // reset/nop/stop/rte/rtd/rts/trapv/rtr\r
 \r
   switch (type)\r
   {\r
@@ -173,30 +173,45 @@ int Op4E70(int op)
     return 0;\r
 \r
     case 3: // rte\r
-    OpStart(op,0x10); Cycles=20;\r
-    SuperCheck(op);\r
+    OpStart(op,0x10,0,0,1); Cycles=20;\r
     PopSr(1);\r
     ot("  ldr r10,[r7,#0x60] ;@ Get Memory base\n");\r
     PopPc();\r
-    SuperChange(op);\r
-    CheckInterrupt(op);\r
-    OpEnd(0x10);\r
+    ot("  ldr r1,[r7,#0x44] ;@ reload SR high\n");\r
+    SuperChange(op,1);\r
+#if EMULATE_ADDRESS_ERRORS_JUMP || EMULATE_ADDRESS_ERRORS_IO || EMULATE_HALT\r
+    ot("  ldr r1,[r7,#0x58]\n");\r
+    ot("  bic r1,r1,#0x0c ;@ clear 'not processing instruction' and 'doing addr error' bits\n");\r
+    ot("  str r1,[r7,#0x58]\n");\r
+#endif\r
+#if EMULATE_ADDRESS_ERRORS_JUMP\r
+    ot("  tst r4,#1 ;@ address error?\n");\r
+    ot("  bne ExceptionAddressError_r_prg_r4\n");\r
+#endif\r
+    opend_check_interrupt = 1;\r
+    opend_check_trace = 1;\r
+    OpEnd(0x10,0);\r
     return 0;\r
 \r
     case 5: // rts\r
     OpStart(op,0x10); Cycles=16;\r
     ot("  ldr r10,[r7,#0x60] ;@ Get Memory base\n");\r
     PopPc();\r
+#if EMULATE_ADDRESS_ERRORS_JUMP\r
+    ot("  tst r4,#1 ;@ address error?\n");\r
+    ot("  bne ExceptionAddressError_r_prg_r4\n");\r
+#endif\r
     OpEnd(0x10);\r
     return 0;\r
 \r
     case 6: // trapv\r
-    OpStart(op,0x10); Cycles=4;\r
+    OpStart(op,0x10,0,1); Cycles=4;\r
     ot("  tst r9,#0x10000000\n");\r
-    ot("  subne r5,r5,#%i\n",30);\r
-    ot("  movne r0,#0x1c ;@ TRAPV exception\n");\r
+    ot("  subne r5,r5,#%i\n",34);\r
+    ot("  movne r0,#7 ;@ TRAPV exception\n");\r
     ot("  blne Exception\n");\r
-    OpEnd(0x10);\r
+    opend_op_changes_cycles = 1;\r
+    OpEnd(0x10,0);\r
     return 0;\r
 \r
     case 7: // rtr\r
@@ -204,6 +219,10 @@ int Op4E70(int op)
     PopSr(0);\r
     ot("  ldr r10,[r7,#0x60] ;@ Get Memory base\n");\r
     PopPc();\r
+#if EMULATE_ADDRESS_ERRORS_JUMP\r
+    ot("  tst r4,#1 ;@ address error?\n");\r
+    ot("  bne ExceptionAddressError_r_prg_r4\n");\r
+#endif\r
     OpEnd(0x10);\r
     return 0;\r
 \r
@@ -233,30 +252,33 @@ int OpJsr(int op)
   ot("\n");\r
   EaCalc(11,0x003f,sea,0);\r
 \r
-  ot(";@ Jump - Get new PC from r0\n");\r
-  if (op&0x40)\r
+  ot(";@ Jump - Get new PC from r11\n");\r
+  ot("  add r0,r11,r10 ;@ Memory Base + New PC\n");\r
+  ot("\n");\r
+  CheckPc();\r
+  if (!(op&0x40))\r
   {\r
-    // Jmp - Get new PC from r0\r
-    ot("  add r0,r11,r10 ;@ Memory Base + New PC\n");\r
-    ot("\n");\r
+    ot("  ldr r2,[r7,#0x3c]\n");\r
+    ot("  sub r1,r4,r10 ;@ r1 = Old PC\n");\r
   }\r
-  else\r
+#if EMULATE_ADDRESS_ERRORS_JUMP\r
+  // jsr prefetches next instruction before pushing old PC,\r
+  // according to http://pasti.fxatari.com/68kdocs/68kPrefetch.html\r
+  ot("  mov r4,r0\n");\r
+  ot("  tst r4,#1 ;@ address error?\n");\r
+  ot("  bne ExceptionAddressError_r_prg_r4\n");\r
+#else\r
+  ot("  bic r4,r0,#1\n");\r
+#endif\r
+\r
+  if (!(op&0x40))\r
   {\r
-    ot(";@ Jsr - Push old PC first\n");\r
-    ot("  sub r1,r4,r10 ;@ r1 = Old PC\n");\r
-    ot("  mov r1,r1,lsl #8\n");\r
-    ot("  ldr r0,[r7,#0x3c]\n");\r
-    ot("  mov r1,r1,asr #8\n");\r
-    ot(";@ Push r1 onto stack\n");\r
-    ot("  sub r0,r0,#4 ;@ Predecrement A7\n");\r
+    ot(";@ Push old PC onto stack\n");\r
+    ot("  sub r0,r2,#4 ;@ Predecrement A7\n");\r
     ot("  str r0,[r7,#0x3c] ;@ Save A7\n");\r
     MemHandler(1,2);\r
-    ot("  add r0,r11,r10 ;@ Memory Base + New PC\n");\r
-    ot("\n");\r
   }\r
 \r
-  CheckPc(0);\r
-\r
   Cycles=(op&0x40) ? 4 : 12;\r
   Cycles+=Ea_add_ns((op&0x40) ? g_jmp_cycle_table : g_jsr_cycle_table, sea);\r
 \r
@@ -319,14 +341,32 @@ int OpDbra(int op)
 \r
     ot(";@ Check if Dn.w is -1\n");\r
     ot("  cmn r0,#1\n");\r
+\r
+#if (USE_CHECKPC_CALLBACK && USE_CHECKPC_DBRA) || EMULATE_ADDRESS_ERRORS_JUMP\r
+    ot("  beq DbraMin1\n");\r
     ot("\n");\r
 \r
+    ot(";@ Get Branch offset:\n");\r
+    ot("  ldrsh r0,[r4]\n");\r
+    ot("  add r0,r4,r0 ;@ r0 = New PC\n");\r
+    CheckPc();\r
+#if EMULATE_ADDRESS_ERRORS_JUMP\r
+    ot("  mov r4,r0\n");\r
+    ot("  tst r4,#1 ;@ address error?\n");\r
+    ot("  bne ExceptionAddressError_r_prg_r4\n");\r
+#else\r
+    ot("  bic r4,r0,#1\n");\r
+#endif\r
+#else\r
+    ot("\n");\r
     ot(";@ Get Branch offset:\n");\r
     ot("  ldrnesh r0,[r4]\n");\r
     ot("  addeq r4,r4,#2 ;@ Skip branch offset\n");\r
     ot("  subeq r5,r5,#4 ;@ additional cycles\n");\r
     ot("  addne r4,r4,r0 ;@ r4 = New PC\n");\r
+    ot("  bic r4,r4,#1\n"); // we do not emulate address errors\r
     ot("\n");\r
+#endif\r
     Cycles=12-2;\r
     OpEnd();\r
   }\r
@@ -342,6 +382,18 @@ int OpDbra(int op)
     OpEnd();\r
   }\r
 \r
+#if (USE_CHECKPC_CALLBACK && USE_CHECKPC_DBRA) || EMULATE_ADDRESS_ERRORS_JUMP\r
+  if (op==0x51c8)\r
+  {\r
+    ot(";@ Dn.w is -1:\n");\r
+    ot("DbraMin1%s\n", ms?"":":");\r
+    ot("  add r4,r4,#2 ;@ Skip branch offset\n");\r
+    ot("\n");\r
+    Cycles=12+2;\r
+    OpEnd();\r
+  }\r
+#endif\r
+\r
   return 0;\r
 }\r
 \r
@@ -349,7 +401,7 @@ int OpDbra(int op)
 // Emit a Branch opcode 0110cccc nn  (cccc=condition)\r
 int OpBranch(int op)\r
 {\r
-  int size=0,use=0;\r
+  int size=0,use=0,checkpc=0;\r
   int offset=0;\r
   int cc=0;\r
   char *asr_r11="";\r
@@ -361,6 +413,7 @@ int OpBranch(int op)
   if (offset==0)  size=1;\r
   if (offset==-1) size=2;\r
 \r
+  if (size==2) size=0; // 000 model does not support long displacement\r
   if (size) use=op; // 16-bit or 32-bit\r
   else use=(op&0xff00)+1; // Use same opcode for all 8-bit branches\r
 \r
@@ -414,11 +467,9 @@ int OpBranch(int op)
   if (cc==1)\r
   {\r
     ot(";@ Bsr - remember old PC\n");\r
+    ot("  ldr r2,[r7,#0x3c]\n");\r
     ot("  sub r1,r4,r10 ;@ r1 = Old PC\n");\r
     if (size) ot("  add r1,r1,#%d\n",1<<size);\r
-    ot("  mov r1,r1, lsl #8\n");\r
-    ot("  ldr r2,[r7,#0x3c]\n");\r
-    ot("  mov r1,r1, asr #8\n");\r
     ot("\n");\r
     ot(";@ Push r1 onto stack\n");\r
     ot("  sub r0,r2,#4 ;@ Predecrement A7\n");\r
@@ -426,37 +477,36 @@ int OpBranch(int op)
     MemHandler(1,2);\r
     ot("\n");\r
     Cycles=18; // always 18\r
-    if (offset==0 || offset==-1)\r
-    {\r
-      ot(";@ Branch is quite far, so may be a good idea to check Memory Base+pc\n");\r
-      ot("  add r0,r4,r11%s ;@ r4 = New PC\n",asr_r11);\r
-      CheckPc(0);\r
-    }\r
-    else\r
-      ot("  add r4,r4,r11%s ;@ r4 = New PC\n",asr_r11);\r
-  }\r
-  else\r
-  {\r
-    if (offset==0 || offset==-1)\r
-    {\r
-      ot("  add r0,r4,r11%s ;@ r4 = New PC\n",asr_r11);\r
-      ot(";@ Branch is quite far, so may be a good idea to check Memory Base+pc\n");\r
-      CheckPc(0);\r
-    }\r
-    else\r
-    {\r
-      ot("  add r4,r4,r11%s ;@ r4 = New PC\n",asr_r11);\r
-      ot("\n");\r
-    }\r
   }\r
 \r
+  ot("  add r0,r4,r11%s ;@ r4 = New PC\n",asr_r11);\r
+\r
+#if USE_CHECKPC_CALLBACK && USE_CHECKPC_OFFSETBITS_8\r
+  if (offset!=0 && offset!=-1) checkpc=1;\r
+#endif\r
+#if USE_CHECKPC_CALLBACK && USE_CHECKPC_OFFSETBITS_16\r
+  if (offset==0)  checkpc=1;\r
+#endif\r
+#if USE_CHECKPC_CALLBACK\r
+  if (offset==-1) checkpc=1;\r
+#endif\r
+  if (checkpc) CheckPc();\r
+#if EMULATE_ADDRESS_ERRORS_JUMP\r
+  ot("  mov r4,r0\n");\r
+  ot("  tst r4,#1 ;@ address error?\n");\r
+  ot("  bne ExceptionAddressError_r_prg_r4\n");\r
+#else\r
+  ot("  bic r4,r0,#1\n");\r
+#endif\r
+  ot("\n");\r
+\r
   OpEnd(size?0x10:0);\r
 \r
   // since all "DontBranch" code is same for every size, output only once\r
   if (cc>=2&&(op&0xff00)==0x6200)\r
   {\r
     ot("BccDontBranch%i%s\n", 8<<size, ms?"":":");\r
-    if (size) ot("  add r4,r4,#%d\n",8<<size);\r
+    if (size) ot("  add r4,r4,#%d\n",1<<size);\r
     Cycles+=(size==1) ? 2 : -2; // Branch not taken\r
     OpEnd(0);\r
   }\r