--- /dev/null
+/*
+ * Copyright (c) Meta Platforms, Inc. and affiliates.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_CCOMMON_H_MODULE
+#define ZSTD_CCOMMON_H_MODULE
+
+/* this module contains definitions which must be identical
+ * across compression, decompression and dictBuilder.
+ * It also contains a few functions useful to at least 2 of them
+ * and which benefit from being inlined */
+
+/*-*************************************
+* Dependencies
+***************************************/
+#include "compiler.h"
+#include "cpu.h"
+#include "mem.h"
+#include "debug.h" /* assert, DEBUGLOG, RAWLOG, g_debuglevel */
+#include "error_private.h"
+#define ZSTD_STATIC_LINKING_ONLY
+#include "../zstd.h"
+#define FSE_STATIC_LINKING_ONLY
+#include "fse.h"
+#include "huf.h"
+#ifndef XXH_STATIC_LINKING_ONLY
+# define XXH_STATIC_LINKING_ONLY /* XXH64_state_t */
+#endif
+#include "xxhash.h" /* XXH_reset, update, digest */
+#ifndef ZSTD_NO_TRACE
+# include "zstd_trace.h"
+#else
+# define ZSTD_TRACE 0
+#endif
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+/* ---- static assert (debug) --- */
+#define ZSTD_STATIC_ASSERT(c) DEBUG_STATIC_ASSERT(c)
+#define ZSTD_isError ERR_isError /* for inlining */
+#define FSE_isError ERR_isError
+#define HUF_isError ERR_isError
+
+
+/*-*************************************
+* shared macros
+***************************************/
+#undef MIN
+#undef MAX
+#define MIN(a,b) ((a)<(b) ? (a) : (b))
+#define MAX(a,b) ((a)>(b) ? (a) : (b))
+#define BOUNDED(min,val,max) (MAX(min,MIN(val,max)))
+
+
+/*-*************************************
+* Common constants
+***************************************/
+#define ZSTD_OPT_NUM (1<<12)
+
+#define ZSTD_REP_NUM 3 /* number of repcodes */
+static UNUSED_ATTR const U32 repStartValue[ZSTD_REP_NUM] = { 1, 4, 8 };
+
+#define KB *(1 <<10)
+#define MB *(1 <<20)
+#define GB *(1U<<30)
+
+#define BIT7 128
+#define BIT6 64
+#define BIT5 32
+#define BIT4 16
+#define BIT1 2
+#define BIT0 1
+
+#define ZSTD_WINDOWLOG_ABSOLUTEMIN 10
+static UNUSED_ATTR const size_t ZSTD_fcs_fieldSize[4] = { 0, 2, 4, 8 };
+static UNUSED_ATTR const size_t ZSTD_did_fieldSize[4] = { 0, 1, 2, 4 };
+
+#define ZSTD_FRAMEIDSIZE 4 /* magic number size */
+
+#define ZSTD_BLOCKHEADERSIZE 3 /* C standard doesn't allow `static const` variable to be init using another `static const` variable */
+static UNUSED_ATTR const size_t ZSTD_blockHeaderSize = ZSTD_BLOCKHEADERSIZE;
+typedef enum { bt_raw, bt_rle, bt_compressed, bt_reserved } blockType_e;
+
+#define ZSTD_FRAMECHECKSUMSIZE 4
+
+#define MIN_SEQUENCES_SIZE 1 /* nbSeq==0 */
+#define MIN_CBLOCK_SIZE (1 /*litCSize*/ + 1 /* RLE or RAW */) /* for a non-null block */
+#define MIN_LITERALS_FOR_4_STREAMS 6
+
+typedef enum { set_basic, set_rle, set_compressed, set_repeat } symbolEncodingType_e;
+
+#define LONGNBSEQ 0x7F00
+
+#define MINMATCH 3
+
+#define Litbits 8
+#define LitHufLog 11
+#define MaxLit ((1<<Litbits) - 1)
+#define MaxML 52
+#define MaxLL 35
+#define DefaultMaxOff 28
+#define MaxOff 31
+#define MaxSeq MAX(MaxLL, MaxML) /* Assumption : MaxOff < MaxLL,MaxML */
+#define MLFSELog 9
+#define LLFSELog 9
+#define OffFSELog 8
+#define MaxFSELog MAX(MAX(MLFSELog, LLFSELog), OffFSELog)
+#define MaxMLBits 16
+#define MaxLLBits 16
+
+#define ZSTD_MAX_HUF_HEADER_SIZE 128 /* header + <= 127 byte tree description */
+/* Each table cannot take more than #symbols * FSELog bits */
+#define ZSTD_MAX_FSE_HEADERS_SIZE (((MaxML + 1) * MLFSELog + (MaxLL + 1) * LLFSELog + (MaxOff + 1) * OffFSELog + 7) / 8)
+
+static UNUSED_ATTR const U8 LL_bits[MaxLL+1] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 2, 2, 3, 3,
+ 4, 6, 7, 8, 9,10,11,12,
+ 13,14,15,16
+};
+static UNUSED_ATTR const S16 LL_defaultNorm[MaxLL+1] = {
+ 4, 3, 2, 2, 2, 2, 2, 2,
+ 2, 2, 2, 2, 2, 1, 1, 1,
+ 2, 2, 2, 2, 2, 2, 2, 2,
+ 2, 3, 2, 1, 1, 1, 1, 1,
+ -1,-1,-1,-1
+};
+#define LL_DEFAULTNORMLOG 6 /* for static allocation */
+static UNUSED_ATTR const U32 LL_defaultNormLog = LL_DEFAULTNORMLOG;
+
+static UNUSED_ATTR const U8 ML_bits[MaxML+1] = {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 2, 2, 3, 3,
+ 4, 4, 5, 7, 8, 9,10,11,
+ 12,13,14,15,16
+};
+static UNUSED_ATTR const S16 ML_defaultNorm[MaxML+1] = {
+ 1, 4, 3, 2, 2, 2, 2, 2,
+ 2, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1,-1,-1,
+ -1,-1,-1,-1,-1
+};
+#define ML_DEFAULTNORMLOG 6 /* for static allocation */
+static UNUSED_ATTR const U32 ML_defaultNormLog = ML_DEFAULTNORMLOG;
+
+static UNUSED_ATTR const S16 OF_defaultNorm[DefaultMaxOff+1] = {
+ 1, 1, 1, 1, 1, 1, 2, 2,
+ 2, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1,
+ -1,-1,-1,-1,-1
+};
+#define OF_DEFAULTNORMLOG 5 /* for static allocation */
+static UNUSED_ATTR const U32 OF_defaultNormLog = OF_DEFAULTNORMLOG;
+
+
+/*-*******************************************
+* Shared functions to include for inlining
+*********************************************/
+static void ZSTD_copy8(void* dst, const void* src) {
+#if defined(ZSTD_ARCH_ARM_NEON)
+ vst1_u8((uint8_t*)dst, vld1_u8((const uint8_t*)src));
+#else
+ ZSTD_memcpy(dst, src, 8);
+#endif
+}
+#define COPY8(d,s) { ZSTD_copy8(d,s); d+=8; s+=8; }
+
+/* Need to use memmove here since the literal buffer can now be located within
+ the dst buffer. In circumstances where the op "catches up" to where the
+ literal buffer is, there can be partial overlaps in this call on the final
+ copy if the literal is being shifted by less than 16 bytes. */
+static void ZSTD_copy16(void* dst, const void* src) {
+#if defined(ZSTD_ARCH_ARM_NEON)
+ vst1q_u8((uint8_t*)dst, vld1q_u8((const uint8_t*)src));
+#elif defined(ZSTD_ARCH_X86_SSE2)
+ _mm_storeu_si128((__m128i*)dst, _mm_loadu_si128((const __m128i*)src));
+#elif defined(__clang__)
+ ZSTD_memmove(dst, src, 16);
+#else
+ /* ZSTD_memmove is not inlined properly by gcc */
+ BYTE copy16_buf[16];
+ ZSTD_memcpy(copy16_buf, src, 16);
+ ZSTD_memcpy(dst, copy16_buf, 16);
+#endif
+}
+#define COPY16(d,s) { ZSTD_copy16(d,s); d+=16; s+=16; }
+
+#define WILDCOPY_OVERLENGTH 32
+#define WILDCOPY_VECLEN 16
+
+typedef enum {
+ ZSTD_no_overlap,
+ ZSTD_overlap_src_before_dst
+ /* ZSTD_overlap_dst_before_src, */
+} ZSTD_overlap_e;
+
+/*! ZSTD_wildcopy() :
+ * Custom version of ZSTD_memcpy(), can over read/write up to WILDCOPY_OVERLENGTH bytes (if length==0)
+ * @param ovtype controls the overlap detection
+ * - ZSTD_no_overlap: The source and destination are guaranteed to be at least WILDCOPY_VECLEN bytes apart.
+ * - ZSTD_overlap_src_before_dst: The src and dst may overlap, but they MUST be at least 8 bytes apart.
+ * The src buffer must be before the dst buffer.
+ */
+MEM_STATIC FORCE_INLINE_ATTR
+void ZSTD_wildcopy(void* dst, const void* src, ptrdiff_t length, ZSTD_overlap_e const ovtype)
+{
+ ptrdiff_t diff = (BYTE*)dst - (const BYTE*)src;
+ const BYTE* ip = (const BYTE*)src;
+ BYTE* op = (BYTE*)dst;
+ BYTE* const oend = op + length;
+
+ if (ovtype == ZSTD_overlap_src_before_dst && diff < WILDCOPY_VECLEN) {
+ /* Handle short offset copies. */
+ do {
+ COPY8(op, ip)
+ } while (op < oend);
+ } else {
+ assert(diff >= WILDCOPY_VECLEN || diff <= -WILDCOPY_VECLEN);
+ /* Separate out the first COPY16() call because the copy length is
+ * almost certain to be short, so the branches have different
+ * probabilities. Since it is almost certain to be short, only do
+ * one COPY16() in the first call. Then, do two calls per loop since
+ * at that point it is more likely to have a high trip count.
+ */
+ ZSTD_copy16(op, ip);
+ if (16 >= length) return;
+ op += 16;
+ ip += 16;
+ do {
+ COPY16(op, ip);
+ COPY16(op, ip);
+ }
+ while (op < oend);
+ }
+}
+
+MEM_STATIC size_t ZSTD_limitCopy(void* dst, size_t dstCapacity, const void* src, size_t srcSize)
+{
+ size_t const length = MIN(dstCapacity, srcSize);
+ if (length > 0) {
+ ZSTD_memcpy(dst, src, length);
+ }
+ return length;
+}
+
+/* define "workspace is too large" as this number of times larger than needed */
+#define ZSTD_WORKSPACETOOLARGE_FACTOR 3
+
+/* when workspace is continuously too large
+ * during at least this number of times,
+ * context's memory usage is considered wasteful,
+ * because it's sized to handle a worst case scenario which rarely happens.
+ * In which case, resize it down to free some memory */
+#define ZSTD_WORKSPACETOOLARGE_MAXDURATION 128
+
+/* Controls whether the input/output buffer is buffered or stable. */
+typedef enum {
+ ZSTD_bm_buffered = 0, /* Buffer the input/output */
+ ZSTD_bm_stable = 1 /* ZSTD_inBuffer/ZSTD_outBuffer is stable */
+} ZSTD_bufferMode_e;
+
+
+/*-*******************************************
+* Private declarations
+*********************************************/
+typedef struct seqDef_s {
+ U32 offBase; /* offBase == Offset + ZSTD_REP_NUM, or repcode 1,2,3 */
+ U16 litLength;
+ U16 mlBase; /* mlBase == matchLength - MINMATCH */
+} seqDef;
+
+/* Controls whether seqStore has a single "long" litLength or matchLength. See seqStore_t. */
+typedef enum {
+ ZSTD_llt_none = 0, /* no longLengthType */
+ ZSTD_llt_literalLength = 1, /* represents a long literal */
+ ZSTD_llt_matchLength = 2 /* represents a long match */
+} ZSTD_longLengthType_e;
+
+typedef struct {
+ seqDef* sequencesStart;
+ seqDef* sequences; /* ptr to end of sequences */
+ BYTE* litStart;
+ BYTE* lit; /* ptr to end of literals */
+ BYTE* llCode;
+ BYTE* mlCode;
+ BYTE* ofCode;
+ size_t maxNbSeq;
+ size_t maxNbLit;
+
+ /* longLengthPos and longLengthType to allow us to represent either a single litLength or matchLength
+ * in the seqStore that has a value larger than U16 (if it exists). To do so, we increment
+ * the existing value of the litLength or matchLength by 0x10000.
+ */
+ ZSTD_longLengthType_e longLengthType;
+ U32 longLengthPos; /* Index of the sequence to apply long length modification to */
+} seqStore_t;
+
+typedef struct {
+ U32 litLength;
+ U32 matchLength;
+} ZSTD_sequenceLength;
+
+/**
+ * Returns the ZSTD_sequenceLength for the given sequences. It handles the decoding of long sequences
+ * indicated by longLengthPos and longLengthType, and adds MINMATCH back to matchLength.
+ */
+MEM_STATIC ZSTD_sequenceLength ZSTD_getSequenceLength(seqStore_t const* seqStore, seqDef const* seq)
+{
+ ZSTD_sequenceLength seqLen;
+ seqLen.litLength = seq->litLength;
+ seqLen.matchLength = seq->mlBase + MINMATCH;
+ if (seqStore->longLengthPos == (U32)(seq - seqStore->sequencesStart)) {
+ if (seqStore->longLengthType == ZSTD_llt_literalLength) {
+ seqLen.litLength += 0x10000;
+ }
+ if (seqStore->longLengthType == ZSTD_llt_matchLength) {
+ seqLen.matchLength += 0x10000;
+ }
+ }
+ return seqLen;
+}
+
+/**
+ * Contains the compressed frame size and an upper-bound for the decompressed frame size.
+ * Note: before using `compressedSize`, check for errors using ZSTD_isError().
+ * similarly, before using `decompressedBound`, check for errors using:
+ * `decompressedBound != ZSTD_CONTENTSIZE_ERROR`
+ */
+typedef struct {
+ size_t nbBlocks;
+ size_t compressedSize;
+ unsigned long long decompressedBound;
+} ZSTD_frameSizeInfo; /* decompress & legacy */
+
+const seqStore_t* ZSTD_getSeqStore(const ZSTD_CCtx* ctx); /* compress & dictBuilder */
+int ZSTD_seqToCodes(const seqStore_t* seqStorePtr); /* compress, dictBuilder, decodeCorpus (shouldn't get its definition from here) */
+
+
+/* ZSTD_invalidateRepCodes() :
+ * ensures next compression will not use repcodes from previous block.
+ * Note : only works with regular variant;
+ * do not use with extDict variant ! */
+void ZSTD_invalidateRepCodes(ZSTD_CCtx* cctx); /* zstdmt, adaptive_compression (shouldn't get this definition from here) */
+
+
+typedef struct {
+ blockType_e blockType;
+ U32 lastBlock;
+ U32 origSize;
+} blockProperties_t; /* declared here for decompress and fullbench */
+
+/*! ZSTD_getcBlockSize() :
+ * Provides the size of compressed block from block header `src` */
+/* Used by: decompress, fullbench (does not get its definition from here) */
+size_t ZSTD_getcBlockSize(const void* src, size_t srcSize,
+ blockProperties_t* bpPtr);
+
+/*! ZSTD_decodeSeqHeaders() :
+ * decode sequence header from src */
+/* Used by: decompress, fullbench (does not get its definition from here) */
+size_t ZSTD_decodeSeqHeaders(ZSTD_DCtx* dctx, int* nbSeqPtr,
+ const void* src, size_t srcSize);
+
+/**
+ * @returns true iff the CPU supports dynamic BMI2 dispatch.
+ */
+MEM_STATIC int ZSTD_cpuSupportsBmi2(void)
+{
+ ZSTD_cpuid_t cpuid = ZSTD_cpuid();
+ return ZSTD_cpuid_bmi1(cpuid) && ZSTD_cpuid_bmi2(cpuid);
+}
+
+#if defined (__cplusplus)
+}
+#endif
+
+#endif /* ZSTD_CCOMMON_H_MODULE */
notaz.gp2x.de / pcsx_rearmed.git / blobdiff