#define MIN(a, b) ((a) < (b) ? (a) : (b))
#endif
+#ifndef MAX
+#define MAX(a, b) ((a) > (b) ? (a) : (b))
+#endif
+
#define ISHEXDEC ((buf[cursor]>='0') && (buf[cursor]<='9')) || ((buf[cursor]>='a') && (buf[cursor]<='f')) || ((buf[cursor]>='A') && (buf[cursor]<='F'))
//hack to prevent retroarch freezing when reseting in the menu but not while running with the hot key
static retro_environment_t environ_cb;
static retro_audio_sample_batch_t audio_batch_cb;
static struct retro_rumble_interface rumble;
+static struct retro_log_callback logging;
+static retro_log_printf_t log_cb;
static void *vout_buf;
static void * vout_buf_ptr;
int multitap2 = 0;
int in_enable_vibration = 1;
+// NegCon adjustment parameters
+// > The NegCon 'twist' action is somewhat awkward when mapped
+// to a standard analog stick -> user should be able to tweak
+// response/deadzone for comfort
+// > When response is linear, 'additional' deadzone (set here)
+// may be left at zero, since this is normally handled via in-game
+// options menus
+// > When response is non-linear, deadzone should be set to match the
+// controller being used (otherwise precision may be lost)
+// > negcon_linearity:
+// - 1: Response is linear - recommended when using racing wheel
+// peripherals, not recommended for standard gamepads
+// - 2: Response is quadratic - optimal setting for gamepads
+// - 3: Response is cubic - enables precise fine control, but
+// difficult to use...
+#define NEGCON_RANGE 0x7FFF
+static int negcon_deadzone = 0;
+static int negcon_linearity = 1;
+
/* PSX max resolution is 640x512, but with enhancement it's 1024x512 */
#define VOUT_MAX_WIDTH 1024
#define VOUT_MAX_HEIGHT 512
}
}
-static void vout_set_mode(int w, int h, int raw_w, int raw_h, int bpp)
+static void set_vout_fb()
{
- vout_width = w;
- vout_height = h;
-
struct retro_framebuffer fb = {0};
fb.width = vout_width;
fb.height = vout_height;
fb.access_flags = RETRO_MEMORY_ACCESS_WRITE;
- vout_buf_ptr = vout_buf;
-
if (environ_cb(RETRO_ENVIRONMENT_GET_CURRENT_SOFTWARE_FRAMEBUFFER, &fb) && fb.format == RETRO_PIXEL_FORMAT_RGB565)
- {
- vout_buf_ptr = (uint16_t*)fb.data;
- }
+ vout_buf_ptr = (uint16_t*)fb.data;
+ else
+ vout_buf_ptr = vout_buf;
+}
+static void vout_set_mode(int w, int h, int raw_w, int raw_h, int bpp)
+{
+ vout_width = w;
+ vout_height = h;
+
+ set_vout_fb();
}
#ifndef FRONTEND_SUPPORTS_RGB565
{
static const struct retro_variable vars[] = {
{ "pcsx_rearmed_frameskip", "Frameskip; 0|1|2|3" },
- { "pcsx_rearmed_region", "Region; Auto|NTSC|PAL" },
- { "pcsx_rearmed_pad1type", "Pad 1 Type; default|none|standard|analog|negcon" },
- { "pcsx_rearmed_pad2type", "Pad 2 Type; default|none|standard|analog|negcon" },
- { "pcsx_rearmed_pad3type", "Pad 3 Type; default|none|standard|analog|negcon" },
- { "pcsx_rearmed_pad4type", "Pad 4 Type; default|none|standard|analog|negcon" },
- { "pcsx_rearmed_pad5type", "Pad 5 Type; default|none|standard|analog|negcon" },
- { "pcsx_rearmed_pad6type", "Pad 6 Type; default|none|standard|analog|negcon" },
- { "pcsx_rearmed_pad7type", "Pad 7 Type; default|none|standard|analog|negcon" },
- { "pcsx_rearmed_pad8type", "Pad 8 Type; default|none|standard|analog|negcon" },
+ { "pcsx_rearmed_region", "Region; auto|NTSC|PAL" },
+ { "pcsx_rearmed_memcard2", "Enable second memory card; disabled|enabled" },
+ { "pcsx_rearmed_pad1type", "Pad 1 Type; default|none|standard|analog|dualshock|negcon" },
+ { "pcsx_rearmed_pad2type", "Pad 2 Type; default|none|standard|analog|dualshock|negcon" },
+ { "pcsx_rearmed_pad3type", "Pad 3 Type; default|none|standard|analog|dualshock|negcon" },
+ { "pcsx_rearmed_pad4type", "Pad 4 Type; default|none|standard|analog|dualshock|negcon" },
+ { "pcsx_rearmed_pad5type", "Pad 5 Type; default|none|standard|analog|dualshock|negcon" },
+ { "pcsx_rearmed_pad6type", "Pad 6 Type; default|none|standard|analog|dualshock|negcon" },
+ { "pcsx_rearmed_pad7type", "Pad 7 Type; default|none|standard|analog|dualshock|negcon" },
+ { "pcsx_rearmed_pad8type", "Pad 8 Type; default|none|standard|analog|dualshock|negcon" },
{ "pcsx_rearmed_multitap1", "Multitap 1; auto|disabled|enabled" },
{ "pcsx_rearmed_multitap2", "Multitap 2; auto|disabled|enabled" },
+ { "pcsx_rearmed_negcon_deadzone", "NegCon Twist Deadzone (percent); 0|5|10|15|20|25|30" },
+ { "pcsx_rearmed_negcon_response", "NegCon Twist Response; linear|quadratic|cubic" },
{ "pcsx_rearmed_vibration", "Enable Vibration; enabled|disabled" },
+ { "pcsx_rearmed_dithering", "Enable Dithering; enabled|disabled" },
#ifndef DRC_DISABLE
{ "pcsx_rearmed_drc", "Dynamic recompiler; enabled|disabled" },
#endif
{ NULL, NULL },
};
+ if (cb(RETRO_ENVIRONMENT_GET_LOG_INTERFACE, &logging))
+ log_cb = logging.log;
+
environ_cb = cb;
cb(RETRO_ENVIRONMENT_SET_VARIABLES, (void*)vars);
if (strcmp(var.value, "standard") == 0)
in_type[port] = PSE_PAD_TYPE_STANDARD;
else if (strcmp(var.value, "analog") == 0)
+ in_type[port] = PSE_PAD_TYPE_ANALOGJOY;
+ else if (strcmp(var.value, "dualshock") == 0)
in_type[port] = PSE_PAD_TYPE_ANALOGPAD;
else if (strcmp(var.value, "negcon") == 0)
in_type[port] = PSE_PAD_TYPE_NEGCON;
if (is_m3u) {
if (!read_m3u(info->path)) {
- SysPrintf("failed to read m3u file\n");
+ log_cb(RETRO_LOG_INFO, "failed to read m3u file\n");
return false;
}
} else {
/* have to reload after set_cd_image for correct cdr plugin */
if (LoadPlugins() == -1) {
- SysPrintf("failed to load plugins\n");
+ log_cb(RETRO_LOG_INFO, "failed to load plugins\n");
return false;
}
NetOpened = 0;
if (OpenPlugins() == -1) {
- SysPrintf("failed to open plugins\n");
+ log_cb(RETRO_LOG_INFO, "failed to open plugins\n");
return false;
}
plugin_call_rearmed_cbs();
dfinput_activate();
- Config.PsxAuto = 1;
if (CheckCdrom() == -1) {
- SysPrintf("unsupported/invalid CD image: %s\n", info->path);
+ log_cb(RETRO_LOG_INFO, "unsupported/invalid CD image: %s\n", info->path);
return false;
}
SysReset();
if (LoadCdrom() == -1) {
- SysPrintf("could not load CD-ROM!\n");
+ log_cb(RETRO_LOG_INFO, "could not load CD\n");
return false;
}
emu_on_new_cd(0);
if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) || var.value)
{
Config.PsxAuto = 0;
- if (strcmp(var.value, "Automatic") == 0)
+ if (strcmp(var.value, "auto") == 0)
Config.PsxAuto = 1;
else if (strcmp(var.value, "NTSC") == 0)
Config.PsxType = 0;
update_multitap();
+ var.value = NULL;
+ var.key = "pcsx_rearmed_negcon_deadzone";
+ negcon_deadzone = 0;
+ if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) || var.value)
+ {
+ negcon_deadzone = (int)(atoi(var.value) * 0.01f * NEGCON_RANGE);
+ }
+
+ var.value = NULL;
+ var.key = "pcsx_rearmed_negcon_response";
+ negcon_linearity = 1;
+ if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) || var.value)
+ {
+ if (strcmp(var.value, "quadratic") == 0){
+ negcon_linearity = 2;
+ } else if (strcmp(var.value, "cubic") == 0){
+ negcon_linearity = 3;
+ }
+ }
+
var.value = NULL;
var.key = "pcsx_rearmed_vibration";
in_enable_vibration = 1;
}
+ var.value = NULL;
+ var.key = "pcsx_rearmed_dithering";
+
+ if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) || var.value)
+ {
+ if (strcmp(var.value, "disabled") == 0) {
+ pl_rearmed_cbs.gpu_peops.iUseDither = 0;
+ pl_rearmed_cbs.gpu_peopsgl.bDrawDither = 0;
+#ifdef __ARM_NEON__
+ pl_rearmed_cbs.gpu_neon.allow_dithering = 0;
+#endif
+ }
+ else if (strcmp(var.value, "enabled") == 0) {
+ pl_rearmed_cbs.gpu_peops.iUseDither = 1;
+ pl_rearmed_cbs.gpu_peopsgl.bDrawDither = 1;
+#ifdef __ARM_NEON__
+ pl_rearmed_cbs.gpu_neon.allow_dithering = 1;
+#endif
+ }
+ }
+
#ifdef __ARM_NEON__
var.value = "NULL";
var.key = "pcsx_rearmed_neon_interlace_enable";
}
}
+// Taken from beetle-psx-libretro
+static uint16_t get_analog_button(retro_input_state_t input_state_cb, int player_index, int id)
+{
+ uint16_t button;
+
+ // NOTE: Analog buttons were added Nov 2017. Not all front-ends support this
+ // feature (or pre-date it) so we need to handle this in a graceful way.
+
+ // First, try and get an analog value using the new libretro API constant
+ button = input_state_cb(player_index,
+ RETRO_DEVICE_ANALOG,
+ RETRO_DEVICE_INDEX_ANALOG_BUTTON,
+ id);
+ button = MIN(button / 128, 255);
+
+ if (button == 0)
+ {
+ // If we got exactly zero, we're either not pressing the button, or the front-end
+ // is not reporting analog values. We need to do a second check using the classic
+ // digital API method, to at least get some response - better than nothing.
+
+ // NOTE: If we're really just not holding the button, we're still going to get zero.
+
+ button = input_state_cb(player_index,
+ RETRO_DEVICE_JOYPAD,
+ 0,
+ id) ? 255 : 0;
+ }
+
+ return button;
+}
+
void retro_run(void)
{
int i;
// reset all keystate, query libretro for keystate
int j;
+ int lsx;
+ int rsy;
+ float negcon_twist_amplitude;
+ int negcon_i_rs;
+ int negcon_ii_rs;
for(i = 0; i < PORTS_NUMBER; i++) {
in_keystate[i] = 0;
if (in_type[i] == PSE_PAD_TYPE_NONE)
continue;
- // query libretro for keystate
- for (j = 0; j < RETRO_PSX_MAP_LEN; j++)
- if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, j))
- in_keystate[i] |= retro_psx_map[j];
-
- if (in_type[i] == PSE_PAD_TYPE_ANALOGPAD)
+ if (in_type[i] == PSE_PAD_TYPE_NEGCON)
+ {
+ // Query digital inputs
+ //
+ // > Pad-Up
+ if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_UP)){
+ in_keystate[i] |= (1 << DKEY_UP);
+ }
+ // > Pad-Right
+ if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_RIGHT)){
+ in_keystate[i] |= (1 << DKEY_RIGHT);
+ }
+ // > Pad-Down
+ if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_DOWN)){
+ in_keystate[i] |= (1 << DKEY_DOWN);
+ }
+ // > Pad-Left
+ if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_LEFT)){
+ in_keystate[i] |= (1 << DKEY_LEFT);
+ }
+ // > Start
+ if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_START)){
+ in_keystate[i] |= (1 << DKEY_START);
+ }
+ // > neGcon A
+ if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_A)){
+ in_keystate[i] |= (1 << DKEY_CIRCLE);
+ }
+ // > neGcon B
+ if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_X)){
+ in_keystate[i] |= (1 << DKEY_TRIANGLE);
+ }
+ // > neGcon R shoulder (digital)
+ if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, RETRO_DEVICE_ID_JOYPAD_R)){
+ in_keystate[i] |= (1 << DKEY_R1);
+ }
+ // Query analog inputs
+ //
+ // From studying 'libpcsxcore/plugins.c' and 'frontend/plugin.c':
+ // >> pad->leftJoyX == in_analog_left[i][0] == NeGcon II
+ // >> pad->leftJoyY == in_analog_left[i][1] == NeGcon L
+ // >> pad->rightJoyX == in_analog_right[i][0] == NeGcon twist
+ // >> pad->rightJoyY == in_analog_right[i][1] == NeGcon I
+ // So we just have to map in_analog_left/right to more
+ // appropriate inputs...
+ //
+ // > NeGcon twist
+ // >> Get raw analog stick value and account for deadzone
+ lsx = input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_LEFT, RETRO_DEVICE_ID_ANALOG_X);
+ if (lsx > negcon_deadzone){
+ lsx = lsx - negcon_deadzone;
+ } else if (lsx < -negcon_deadzone){
+ lsx = lsx + negcon_deadzone;
+ } else {
+ lsx = 0;
+ }
+ // >> Convert to an 'amplitude' [-1.0,1.0] and adjust response
+ negcon_twist_amplitude = (float)lsx / (float)(NEGCON_RANGE - negcon_deadzone);
+ if (negcon_linearity == 2){
+ if (negcon_twist_amplitude < 0.0){
+ negcon_twist_amplitude = -(negcon_twist_amplitude * negcon_twist_amplitude);
+ } else {
+ negcon_twist_amplitude = negcon_twist_amplitude * negcon_twist_amplitude;
+ }
+ } else if (negcon_linearity == 3){
+ negcon_twist_amplitude = negcon_twist_amplitude * negcon_twist_amplitude * negcon_twist_amplitude;
+ }
+ // >> Convert to final 'in_analog' integer value [0,255]
+ in_analog_right[i][0] = MAX(MIN((int)(negcon_twist_amplitude * 128.0f) + 128, 255), 0);
+ // > NeGcon I + II
+ // >> Handle right analog stick vertical axis mapping...
+ // - Up (-Y) == accelerate == neGcon I
+ // - Down (+Y) == brake == neGcon II
+ negcon_i_rs = 0;
+ negcon_ii_rs = 0;
+ rsy = input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_RIGHT, RETRO_DEVICE_ID_ANALOG_Y);
+ if (rsy >= 0){
+ // Account for deadzone
+ // (Note: have never encountered a gamepad with significant differences
+ // in deadzone between left/right analog sticks, so use the regular 'twist'
+ // deadzone here)
+ if (rsy > negcon_deadzone){
+ rsy = rsy - negcon_deadzone;
+ } else {
+ rsy = 0;
+ }
+ // Convert to 'in_analog' integer value [0,255]
+ negcon_ii_rs = MIN((int)(((float)rsy / (float)(NEGCON_RANGE - negcon_deadzone)) * 255.0f), 255);
+ } else {
+ if (rsy < -negcon_deadzone){
+ rsy = -1 * (rsy + negcon_deadzone);
+ } else {
+ rsy = 0;
+ }
+ negcon_i_rs = MIN((int)(((float)rsy / (float)(NEGCON_RANGE - negcon_deadzone)) * 255.0f), 255);
+ }
+ // >> NeGcon I
+ in_analog_right[i][1] = MAX(
+ MAX(
+ get_analog_button(input_state_cb, i, RETRO_DEVICE_ID_JOYPAD_R2),
+ get_analog_button(input_state_cb, i, RETRO_DEVICE_ID_JOYPAD_B)
+ ),
+ negcon_i_rs
+ );
+ // >> NeGcon II
+ in_analog_left[i][0] = MAX(
+ MAX(
+ get_analog_button(input_state_cb, i, RETRO_DEVICE_ID_JOYPAD_L2),
+ get_analog_button(input_state_cb, i, RETRO_DEVICE_ID_JOYPAD_Y)
+ ),
+ negcon_ii_rs
+ );
+ // > NeGcon L
+ in_analog_left[i][1] = get_analog_button(input_state_cb, i, RETRO_DEVICE_ID_JOYPAD_L);
+ }
+ else
{
- in_analog_left[i][0] = MIN((input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_LEFT, RETRO_DEVICE_ID_ANALOG_X) / 255) + 128, 255);
- in_analog_left[i][1] = MIN((input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_LEFT, RETRO_DEVICE_ID_ANALOG_Y) / 255) + 128, 255);
- in_analog_right[i][0] = MIN((input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_RIGHT, RETRO_DEVICE_ID_ANALOG_X) / 255) + 128, 255);
- in_analog_right[i][1] = MIN((input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_RIGHT, RETRO_DEVICE_ID_ANALOG_Y) / 255) + 128, 255);
+ // Query digital inputs
+ for (j = 0; j < RETRO_PSX_MAP_LEN; j++){
+ if (input_state_cb(i, RETRO_DEVICE_JOYPAD, 0, j)){
+ in_keystate[i] |= retro_psx_map[j];
+ }
+ }
+ // Query analog inputs
+ if (in_type[i] == PSE_PAD_TYPE_ANALOGJOY || in_type[i] == PSE_PAD_TYPE_ANALOGPAD)
+ {
+ in_analog_left[i][0] = MIN((input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_LEFT, RETRO_DEVICE_ID_ANALOG_X) / 255) + 128, 255);
+ in_analog_left[i][1] = MIN((input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_LEFT, RETRO_DEVICE_ID_ANALOG_Y) / 255) + 128, 255);
+ in_analog_right[i][0] = MIN((input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_RIGHT, RETRO_DEVICE_ID_ANALOG_X) / 255) + 128, 255);
+ in_analog_right[i][1] = MIN((input_state_cb(i, RETRO_DEVICE_ANALOG, RETRO_DEVICE_INDEX_ANALOG_RIGHT, RETRO_DEVICE_ID_ANALOG_Y) / 255) + 128, 255);
+ }
}
}
video_cb((vout_fb_dirty || !vout_can_dupe || !duping_enable) ? vout_buf_ptr : NULL,
vout_width, vout_height, vout_width * 2);
vout_fb_dirty = 0;
+
+ set_vout_fb();
}
static bool try_use_bios(const char *path)
if (strncasecmp(ent->d_name, "scph", 4) != 0)
continue;
- snprintf(path, path_size, "%s/%s", dirpath, ent->d_name);
+ snprintf(path, path_size, "%s%c%s", dirpath, SLASH, ent->d_name);
ret = try_use_bios(path);
if (ret)
break;
environ_cb(RETRO_ENVIRONMENT_SET_PERFORMANCE_LEVEL, &level);
}
+static int init_memcards(void)
+{
+ int ret = 0;
+ const char *dir;
+ struct retro_variable var = { .key="pcsx_rearmed_memcard2", .value=NULL };
+ static const char CARD2_FILE[] = "pcsx-card2.mcd";
+
+ McdDisable[0] = 0;
+ // Disable memcard 2 by default
+ McdDisable[1] = 1;
+ init_memcard(Mcd1Data);
+ // Memcard 2 is managed by the emulator on the filesystem,
+ // There is no need to initialize Mcd2Data like Mcd1Data.
+
+ if (environ_cb(RETRO_ENVIRONMENT_GET_VARIABLE, &var) && var.value) {
+ SysPrintf("Memcard 2: %s\n", var.value);
+ if (memcmp(var.value, "enabled", 7) == 0) {
+ if (environ_cb(RETRO_ENVIRONMENT_GET_SAVE_DIRECTORY, &dir) && dir) {
+ if (strlen(dir) + strlen(CARD2_FILE) + 2 > sizeof(Config.Mcd2)) {
+ SysPrintf("Path '%s' is too long. Cannot use memcard 2. Use a shorter path.\n", dir);
+ ret = -1;
+ } else {
+ McdDisable[1] = 0;
+ snprintf(Config.Mcd2, sizeof(Config.Mcd2), "%s/%s", dir, CARD2_FILE);
+ SysPrintf("Use memcard 2: %s\n", Config.Mcd2);
+ }
+ } else {
+ SysPrintf("Could not get save directory! Could not create memcard 2.");
+ ret = -1;
+ }
+ }
+ }
+ return ret;
+}
+
void retro_init(void)
{
- const char *bios[] = { "scph1001", "scph5501", "scph7001" };
+ const char *bios[] = {
+ "SCPH101", "SCPH7001", "SCPH5501", "SCPH1001",
+ "scph101", "scph7001", "scph5501", "scph1001"
+ };
const char *dir;
char path[256];
int i, ret;
if(!__ctr_svchax)
Config.Cpu = CPU_INTERPRETER;
#endif
+ ret |= init_memcards();
ret |= emu_core_init();
if (ret != 0) {
snprintf(Config.BiosDir, sizeof(Config.BiosDir), "%s", dir);
for (i = 0; i < sizeof(bios) / sizeof(bios[0]); i++) {
- snprintf(path, sizeof(path), "%s/%s.bin", dir, bios[i]);
+ snprintf(path, sizeof(path), "%s%c%s.bin", dir, SLASH, bios[i]);
found_bios = try_use_bios(path);
if (found_bios)
break;
SysPrintf("no BIOS files found.\n");
struct retro_message msg =
{
- "No BIOS file found - add for better compatibility",
+ "No PlayStation BIOS file found - add for better compatibility",
180
};
environ_cb(RETRO_ENVIRONMENT_SET_MESSAGE, (void*)&msg);
pl_rearmed_cbs.gpu_peops.iUseDither = 1;
spu_config.iUseFixedUpdates = 1;
- McdDisable[0] = 0;
- McdDisable[1] = 1;
- init_memcard(Mcd1Data);
- init_memcard(Mcd2Data);
-
SaveFuncs.open = save_open;
SaveFuncs.read = save_read;
SaveFuncs.write = save_write;
notaz.gp2x.de / pcsx_rearmed.git / blobdiff