GPUupdateLace GPU_updateLace;
GPUinit GPU_init;
-GPUshutdown GPU_shutdown;
+GPUshutdown GPU_shutdown;
GPUconfigure GPU_configure;
GPUtest GPU_test;
GPUabout GPU_about;
GPUreadStatus GPU_readStatus;
GPUreadData GPU_readData;
GPUreadDataMem GPU_readDataMem;
-GPUwriteStatus GPU_writeStatus;
+GPUwriteStatus GPU_writeStatus;
GPUwriteData GPU_writeData;
GPUwriteDataMem GPU_writeDataMem;
GPUdmaChain GPU_dmaChain;
CDRinit CDR_init;
CDRshutdown CDR_shutdown;
CDRopen CDR_open;
-CDRclose CDR_close;
+CDRclose CDR_close;
CDRtest CDR_test;
CDRgetTN CDR_getTN;
CDRgetTD CDR_getTD;
NETinit NET_init;
NETshutdown NET_shutdown;
NETopen NET_open;
-NETclose NET_close;
+NETclose NET_close;
NETtest NET_test;
NETconfigure NET_configure;
NETabout NET_about;
SIO1init SIO1_init;
SIO1shutdown SIO1_shutdown;
SIO1open SIO1_open;
-SIO1close SIO1_close;
+SIO1close SIO1_close;
SIO1test SIO1_test;
SIO1configure SIO1_configure;
SIO1about SIO1_about;
void *drv;
hGPUDriver = SysLoadLibrary(GPUdll);
- if (hGPUDriver == NULL) {
+ if (hGPUDriver == NULL) {
GPU_configure = NULL;
- SysMessage (_("Could not load GPU plugin %s!"), GPUdll); return -1;
+ SysMessage (_("Could not load GPU plugin %s!"), GPUdll); return -1;
}
drv = hGPUDriver;
LoadGpuSym1(init, "GPUinit");
LoadGpuSym0(getScreenPic, "GPUgetScreenPic");
LoadGpuSym0(showScreenPic, "GPUshowScreenPic");
LoadGpuSym0(clearDynarec, "GPUclearDynarec");
- LoadGpuSym0(vBlank, "GPUvBlank");
+ LoadGpuSym0(vBlank, "GPUvBlank");
LoadGpuSym0(configure, "GPUconfigure");
LoadGpuSym0(test, "GPUtest");
LoadGpuSym0(about, "GPUabout");
LoadSpuSym0(about, "SPUabout");
LoadSpuSym0(test, "SPUtest");
LoadSpuSym1(writeRegister, "SPUwriteRegister");
- LoadSpuSym1(readRegister, "SPUreadRegister");
+ LoadSpuSym1(readRegister, "SPUreadRegister");
LoadSpuSym1(writeDMA, "SPUwriteDMA");
LoadSpuSym1(readDMA, "SPUreadDMA");
LoadSpuSym1(writeDMAMem, "SPUwriteDMAMem");
return 0;
}
+extern int in_type[8];
+
void *hPAD1Driver = NULL;
void *hPAD2Driver = NULL;
static int reqPos, respSize, req;
static int ledStateReq44[8];
+static int PadMode[8]; /* 0 : digital 1: analog */
static unsigned char buf[256];
-static unsigned char bufMulti[34] = { 0x80, 0x5a,
+static unsigned char bufMulti[34] = { 0x80, 0x5a,
0x41, 0x5a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0x41, 0x5a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0x41, 0x5a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0x41, 0x5a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
+
unsigned char stdpar[8] = { 0x41, 0x5a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-unsigned char multitappar[34] = { 0x80, 0x5a,
+unsigned char multitappar[34] = { 0x80, 0x5a,
0x41, 0x5a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0x41, 0x5a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0x41, 0x5a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0x41, 0x5a, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
+
//response for request 44, 45, 46, 47, 4C, 4D
static unsigned char resp45[8] = {0xF3, 0x5A, 0x01, 0x02, 0x00, 0x02, 0x01, 0x00};
static unsigned char resp46_00[8] = {0xF3, 0x5A, 0x00, 0x00, 0x01, 0x02, 0x00, 0x0A};
// AA rumble large motor speed 0x00 -> 0xFF
// RESPONSE
// header 3 Bytes
- // 0x00
- // PadId -> 0x41 for digital pas, 0x73 for analog pad
+ // 0x00
+ // PadId -> 0x41 for digital pas, 0x73 for analog pad
// 0x5A mode has not change (no press on analog button on the center of pad), 0x00 the analog button have been pressed and the mode switch
// 6 Bytes for keystates
CMD_READ_DATA_AND_VIBRATE = 0x42,
-
+
// REQUEST
// Header
// 0x0N, 0x43, 0x00, XX, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
// XX = 00 -> Normal mode : Seconde bytes of response = padId
// XX = 01 -> Configuration mode : Seconde bytes of response = 0xF3
// RESPONSE
- // enter in config mode example :
+ // enter in config mode example :
// req : 01 43 00 01 00 00 00 00 00 00
// res : 00 41 5A buttons state, analog states
- // exit config mode :
+ // exit config mode :
// req : 01 43 00 00 00 00 00 00 00 00
// res : 00 F3 5A buttons state, analog states
CMD_CONFIG_MODE = 0x43,
-
+
// Set led State
// REQUEST
// 0x0N, 0x44, 0x00, VAL, SEL, 0x00, 0x00, 0x00, 0x00
// RESPONSE
// 0x00, 0xF3, 0x5A, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
CMD_SET_MODE_AND_LOCK = 0x44,
-
+
// Get Analog Led state
// REQUEST
// 0x0N, 0x45, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
// VAL = 00 Led OFF
// VAL = 01 Led ON
CMD_QUERY_MODEL_AND_MODE = 0x45,
-
+
//Get Variable A
// REQUEST
// 0x0N, 0x46, 0x00, 0xXX, 0x00, 0x00, 0x00, 0x00, 0x00
// XX=01
// 0x00, 0xF3, 0x5A, 0x00, 0x00, 0x01, 0x01, 0x01, 0x14
CMD_QUERY_ACT = 0x46,
-
+
// REQUEST
// 0x0N, 0x47, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
// RESPONSE
// 0x00, 0xF3, 0x5A, 0x00, 0x00, 0x02, 0x00, 0x01, 0x00
CMD_QUERY_COMB = 0x47,
-
+
// REQUEST
// 0x0N, 0x4C, 0x00, 0xXX, 0x00, 0x00, 0x00, 0x00, 0x00
// RESPONSE
// XX = 1
// 0x00, 0xF3, 0x5A, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00
CMD_QUERY_MODE = 0x4C,
-
+
// REQUEST
// 0x0N, 0x4D, 0x00, 0xAA, 0xBB, 0xCC, 0xDD, 0xEE, 0xFF
// RESPONSE
break;
case CMD_QUERY_MODEL_AND_MODE :
memcpy(buf, resp45, 8);
+ buf[4] = PadMode[padIndex];
break;
case CMD_QUERY_ACT :
memcpy(buf, resp46_00, 8);
//0x01 analog ON
//0x00 analog OFF
ledStateReq44[padIndex] = value;
+ PadMode[padIndex] = value;
break;
case CMD_QUERY_ACT :
//0x46
break;
}
}
-
+
void vibrate(int padIndex){
if (pad[padIndex].Vib[0] != pad[padIndex].VibF[0] || pad[padIndex].Vib[1] != pad[padIndex].VibF[1]) {
//value is different update Value and call libretro for vibration
//Build response for 0x42 request Pad in port
void _PADstartPoll(PadDataS *pad) {
- switch (pad->controllerType) {
- case PSE_PAD_TYPE_MOUSE:
+ switch (pad->controllerType) {
+ case PSE_PAD_TYPE_MOUSE:
stdpar[0] = 0x12;
- stdpar[2] = pad->buttonStatus & 0xff;
- stdpar[3] = pad->buttonStatus >> 8;
- stdpar[4] = pad->moveX;
- stdpar[5] = pad->moveY;
- memcpy(buf, stdpar, 6);
- respSize = 6;
- break;
- case PSE_PAD_TYPE_NEGCON: // npc101/npc104(slph00001/slph00069)
- stdpar[0] = 0x23;
- stdpar[2] = pad->buttonStatus & 0xff;
- stdpar[3] = pad->buttonStatus >> 8;
- stdpar[4] = pad->rightJoyX;
- stdpar[5] = pad->rightJoyY;
- stdpar[6] = pad->leftJoyX;
- stdpar[7] = pad->leftJoyY;
- memcpy(buf, stdpar, 8);
- respSize = 8;
- break;
- case PSE_PAD_TYPE_ANALOGPAD: // scph1150
- stdpar[0] = 0x73;
- stdpar[2] = pad->buttonStatus & 0xff;
- stdpar[3] = pad->buttonStatus >> 8;
- stdpar[4] = pad->rightJoyX;
- stdpar[5] = pad->rightJoyY;
- stdpar[6] = pad->leftJoyX;
- stdpar[7] = pad->leftJoyY;
- memcpy(buf, stdpar, 8);
- respSize = 8;
- break;
- case PSE_PAD_TYPE_ANALOGJOY: // scph1110
- stdpar[0] = 0x53;
- stdpar[2] = pad->buttonStatus & 0xff;
- stdpar[3] = pad->buttonStatus >> 8;
- stdpar[4] = pad->rightJoyX;
- stdpar[5] = pad->rightJoyY;
- stdpar[6] = pad->leftJoyX;
- stdpar[7] = pad->leftJoyY;
- memcpy(buf, stdpar, 8);
- respSize = 8;
- break;
- case PSE_PAD_TYPE_STANDARD:
- default:
- stdpar[0] = 0x41;
- stdpar[2] = pad->buttonStatus & 0xff;
- stdpar[3] = pad->buttonStatus >> 8;
- //avoid analog value in multitap mode if change pad type in game.
- stdpar[4] = 0xff;
- stdpar[5] = 0xff;
- stdpar[6] = 0xff;
- stdpar[7] = 0xff;
- memcpy(buf, stdpar, 8);
- respSize = 8;
- }
+ stdpar[1] = 0x5a;
+ stdpar[2] = pad->buttonStatus & 0xff;
+ stdpar[3] = pad->buttonStatus >> 8;
+ stdpar[4] = pad->moveX;
+ stdpar[5] = pad->moveY;
+ memcpy(buf, stdpar, 6);
+ respSize = 6;
+ break;
+ case PSE_PAD_TYPE_NEGCON: // npc101/npc104(slph00001/slph00069)
+ stdpar[0] = 0x23;
+ stdpar[1] = 0x5a;
+ stdpar[2] = pad->buttonStatus & 0xff;
+ stdpar[3] = pad->buttonStatus >> 8;
+ stdpar[4] = pad->rightJoyX;
+ stdpar[5] = pad->rightJoyY;
+ stdpar[6] = pad->leftJoyX;
+ stdpar[7] = pad->leftJoyY;
+ memcpy(buf, stdpar, 8);
+ respSize = 8;
+ break;
+ case PSE_PAD_TYPE_GUNCON: // GUNCON - gun controller SLPH-00034 from Namco
+ stdpar[0] = 0x63;
+ stdpar[1] = 0x5a;
+ stdpar[2] = pad->buttonStatus & 0xff;
+ stdpar[3] = pad->buttonStatus >> 8;
+
+ //This code assumes an X resolution of 256 and a Y resolution of 240
+ int xres = 256;
+ int yres = 240;
+
+ //The code wants an input range for x and y of 0-1023 we passed in -32767 -> 32767
+ int absX = (pad->absoluteX / 64) + 512;
+ int absY = (pad->absoluteY / 64) + 512;
+
+ //Keep within limits
+ if (absX > 1023) absX = 1023;
+ if (absX < 0) absX = 0;
+ if (absY > 1023) absY = 1023;
+ if (absY < 0) absY = 0;
+
+ stdpar[4] = 0x5a - (xres - 256) / 3 + (((xres - 256) / 3 + 356) * absX >> 10);
+ stdpar[5] = (0x5a - (xres - 256) / 3 + (((xres - 256) / 3 + 356) * absX >> 10)) >> 8;
+ stdpar[6] = 0x20 + (yres * absY >> 10);
+ stdpar[7] = (0x20 + (yres * absY >> 10)) >> 8;
+
+ //Offscreen - Point at the side of the screen so PSX thinks you are pointing offscreen
+ //Required as a mouse can't be offscreen
+ //Coordinates X=0001h, Y=000Ah indicates "no light"
+ //This will mean you cannot shoot the very each of the screen
+ //ToDo read offscreen range from settings if useful to change
+ int OffscreenRange = 2;
+ if (absX < (OffscreenRange) || absX > (1023 - OffscreenRange) || absY < (OffscreenRange) || absY > (1023 - OffscreenRange)) {
+ stdpar[4] = 0x01;
+ stdpar[5] = 0x00;
+ stdpar[6] = 0x0A;
+ stdpar[7] = 0x00;
+ }
+
+ memcpy(buf, stdpar, 8);
+ respSize = 8;
+ break;
+ case PSE_PAD_TYPE_ANALOGPAD: // scph1150
+ stdpar[0] = 0x73;
+ stdpar[1] = 0x5a;
+ stdpar[2] = pad->buttonStatus & 0xff;
+ stdpar[3] = pad->buttonStatus >> 8;
+ stdpar[4] = pad->rightJoyX;
+ stdpar[5] = pad->rightJoyY;
+ stdpar[6] = pad->leftJoyX;
+ stdpar[7] = pad->leftJoyY;
+ memcpy(buf, stdpar, 8);
+ respSize = 8;
+ break;
+ case PSE_PAD_TYPE_ANALOGJOY: // scph1110
+ stdpar[0] = 0x53;
+ stdpar[1] = 0x5a;
+ stdpar[2] = pad->buttonStatus & 0xff;
+ stdpar[3] = pad->buttonStatus >> 8;
+ stdpar[4] = pad->rightJoyX;
+ stdpar[5] = pad->rightJoyY;
+ stdpar[6] = pad->leftJoyX;
+ stdpar[7] = pad->leftJoyY;
+ memcpy(buf, stdpar, 8);
+ respSize = 8;
+ break;
+ case PSE_PAD_TYPE_STANDARD:
+ stdpar[0] = 0x41;
+ stdpar[1] = 0x5a;
+ stdpar[2] = pad->buttonStatus & 0xff;
+ stdpar[3] = pad->buttonStatus >> 8;
+ //avoid analog value in multitap mode if change pad type in game.
+ stdpar[4] = 0xff;
+ stdpar[5] = 0xff;
+ stdpar[6] = 0xff;
+ stdpar[7] = 0xff;
+ memcpy(buf, stdpar, 8);
+ respSize = 8;
+ break;
+ default:
+ stdpar[0] = 0xff;
+ stdpar[1] = 0xff;
+ stdpar[2] = 0xff;
+ stdpar[3] = 0xff;
+ stdpar[4] = 0xff;
+ stdpar[5] = 0xff;
+ stdpar[6] = 0xff;
+ stdpar[7] = 0xff;
+ memcpy(buf, stdpar, 8);
+ respSize = 8;
+ break;
+ }
}
//Build response for 0x42 request Multitap in port
//Response header for multitap : 0x80, 0x5A, (Pad information port 1-2A), (Pad information port 1-2B), (Pad information port 1-2C), (Pad information port 1-2D)
void _PADstartPollMultitap(PadDataS* padd) {
- int i, offset;
- for(i = 0; i < 4; i++) {
- offset = 2 + (i * 8);
+ int i, offset;
+ for(i = 0; i < 4; i++) {
+ offset = 2 + (i * 8);
_PADstartPoll(&padd[i]);
memcpy(multitappar+offset, stdpar, 8);
- }
- memcpy(bufMulti, multitappar, 34);
- respSize = 34;
+ }
+ memcpy(bufMulti, multitappar, 34);
+ respSize = 34;
}
if (reqPos == 0) {
//mem the request number
req = value;
- //copy the default value of request response in buffer instead of the keystate
- initBufForRequest(port, value);
+
+ // Don't enable Analog/Vibration for a standard pad
+ if (in_type[port] == PSE_PAD_TYPE_STANDARD ||
+ in_type[port] == PSE_PAD_TYPE_NEGCON) {
+ ; // Pad keystate already in buffer
+ }
+ else
+ {
+ //copy the default value of request response in buffer instead of the keystate
+ initBufForRequest(port, value);
+ }
}
-
+
//if no new request the pad return 0xff, for signaling connected
- if (reqPos >= respSize) return 0xff;
-
+ if (reqPos >= respSize
+#ifdef ICACHE_EMULATION
+ && writeok
+#endif
+ ) return 0xff;
+
switch(reqPos){
case 2:
reqIndex2Treatment(port, value);
case CMD_READ_DATA_AND_VIBRATE:
//mem the vibration value for Large motor;
pad[port].Vib[1] = value;
+
+ if (in_type[port] == PSE_PAD_TYPE_STANDARD &&
+ in_type[port] == PSE_PAD_TYPE_NEGCON)
+ break;
+
//vibration
vibrate(port);
break;
}
//printf("%2x:%2x, ",value,tmp);
return tmp;
-
+
}
PAD2_readPort2(&padd);
multitap2 = padd.portMultitap;
}
-
+
// just one pad is on port 1 : NO MULTITAP
if (multitap2 == 0) {
PadDataS padd;
void CALLBACK SIO1__registerCallback(void (CALLBACK *callback)(void)) {};
void CALLBACK SIO1irq(void) {
- psxHu32ref(0x1070) |= SWAPu32(0x100);
+ psxHu32ref(0x1070) |= SWAPu32(0x100);
}
#define LoadSio1Sym1(dest, name) \
- LoadSym(SIO1_##dest, SIO1##dest, name, TRUE);
+ LoadSym(SIO1_##dest, SIO1##dest, name, TRUE);
#define LoadSio1SymN(dest, name) \
- LoadSym(SIO1_##dest, SIO1##dest, name, FALSE);
+ LoadSym(SIO1_##dest, SIO1##dest, name, FALSE);
#define LoadSio1Sym0(dest, name) \
- LoadSym(SIO1_##dest, SIO1##dest, name, FALSE); \
- if (SIO1_##dest == NULL) SIO1_##dest = (SIO1##dest) SIO1__##dest;
+ LoadSym(SIO1_##dest, SIO1##dest, name, FALSE); \
+ if (SIO1_##dest == NULL) SIO1_##dest = (SIO1##dest) SIO1__##dest;
static int LoadSIO1plugin(const char *SIO1dll) {
- void *drv;
-
- hSIO1Driver = SysLoadLibrary(SIO1dll);
- if (hSIO1Driver == NULL) {
- SysMessage (_("Could not load SIO1 plugin %s!"), SIO1dll); return -1;
- }
- drv = hSIO1Driver;
-
- LoadSio1Sym0(init, "SIO1init");
- LoadSio1Sym0(shutdown, "SIO1shutdown");
- LoadSio1Sym0(open, "SIO1open");
- LoadSio1Sym0(close, "SIO1close");
- LoadSio1Sym0(pause, "SIO1pause");
- LoadSio1Sym0(resume, "SIO1resume");
- LoadSio1Sym0(keypressed, "SIO1keypressed");
- LoadSio1Sym0(configure, "SIO1configure");
- LoadSio1Sym0(test, "SIO1test");
- LoadSio1Sym0(about, "SIO1about");
- LoadSio1Sym0(writeData8, "SIO1writeData8");
- LoadSio1Sym0(writeData16, "SIO1writeData16");
- LoadSio1Sym0(writeData32, "SIO1writeData32");
- LoadSio1Sym0(writeStat16, "SIO1writeStat16");
- LoadSio1Sym0(writeStat32, "SIO1writeStat32");
- LoadSio1Sym0(writeMode16, "SIO1writeMode16");
- LoadSio1Sym0(writeMode32, "SIO1writeMode32");
- LoadSio1Sym0(writeCtrl16, "SIO1writeCtrl16");
- LoadSio1Sym0(writeCtrl32, "SIO1writeCtrl32");
- LoadSio1Sym0(writeBaud16, "SIO1writeBaud16");
- LoadSio1Sym0(writeBaud32, "SIO1writeBaud32");
- LoadSio1Sym0(readData16, "SIO1readData16");
- LoadSio1Sym0(readData32, "SIO1readData32");
- LoadSio1Sym0(readStat16, "SIO1readStat16");
- LoadSio1Sym0(readStat32, "SIO1readStat32");
- LoadSio1Sym0(readMode16, "SIO1readMode16");
- LoadSio1Sym0(readMode32, "SIO1readMode32");
- LoadSio1Sym0(readCtrl16, "SIO1readCtrl16");
- LoadSio1Sym0(readCtrl32, "SIO1readCtrl32");
- LoadSio1Sym0(readBaud16, "SIO1readBaud16");
- LoadSio1Sym0(readBaud32, "SIO1readBaud32");
- LoadSio1Sym0(registerCallback, "SIO1registerCallback");
-
- return 0;
+ void *drv;
+
+ hSIO1Driver = SysLoadLibrary(SIO1dll);
+ if (hSIO1Driver == NULL) {
+ SysMessage (_("Could not load SIO1 plugin %s!"), SIO1dll); return -1;
+ }
+ drv = hSIO1Driver;
+
+ LoadSio1Sym0(init, "SIO1init");
+ LoadSio1Sym0(shutdown, "SIO1shutdown");
+ LoadSio1Sym0(open, "SIO1open");
+ LoadSio1Sym0(close, "SIO1close");
+ LoadSio1Sym0(pause, "SIO1pause");
+ LoadSio1Sym0(resume, "SIO1resume");
+ LoadSio1Sym0(keypressed, "SIO1keypressed");
+ LoadSio1Sym0(configure, "SIO1configure");
+ LoadSio1Sym0(test, "SIO1test");
+ LoadSio1Sym0(about, "SIO1about");
+ LoadSio1Sym0(writeData8, "SIO1writeData8");
+ LoadSio1Sym0(writeData16, "SIO1writeData16");
+ LoadSio1Sym0(writeData32, "SIO1writeData32");
+ LoadSio1Sym0(writeStat16, "SIO1writeStat16");
+ LoadSio1Sym0(writeStat32, "SIO1writeStat32");
+ LoadSio1Sym0(writeMode16, "SIO1writeMode16");
+ LoadSio1Sym0(writeMode32, "SIO1writeMode32");
+ LoadSio1Sym0(writeCtrl16, "SIO1writeCtrl16");
+ LoadSio1Sym0(writeCtrl32, "SIO1writeCtrl32");
+ LoadSio1Sym0(writeBaud16, "SIO1writeBaud16");
+ LoadSio1Sym0(writeBaud32, "SIO1writeBaud32");
+ LoadSio1Sym0(readData16, "SIO1readData16");
+ LoadSio1Sym0(readData32, "SIO1readData32");
+ LoadSio1Sym0(readStat16, "SIO1readStat16");
+ LoadSio1Sym0(readStat32, "SIO1readStat32");
+ LoadSio1Sym0(readMode16, "SIO1readMode16");
+ LoadSio1Sym0(readMode32, "SIO1readMode32");
+ LoadSio1Sym0(readCtrl16, "SIO1readCtrl16");
+ LoadSio1Sym0(readCtrl32, "SIO1readCtrl32");
+ LoadSio1Sym0(readBaud16, "SIO1readBaud16");
+ LoadSio1Sym0(readBaud32, "SIO1readBaud32");
+ LoadSio1Sym0(registerCallback, "SIO1registerCallback");
+
+ return 0;
}
#endif
int LoadPlugins() {
int ret;
- char Plugin[MAXPATHLEN];
+ char Plugin[MAXPATHLEN * 2];
ReleasePlugins();
SysLibError();
if (hPAD1Driver != NULL) PAD1_shutdown();
if (hPAD2Driver != NULL) PAD2_shutdown();
- if (Config.UseNet && hNETDriver != NULL) NET_shutdown();
+ if (Config.UseNet && hNETDriver != NULL) NET_shutdown();
if (hCDRDriver != NULL) { SysCloseLibrary(hCDRDriver); hCDRDriver = NULL; }
if (hGPUDriver != NULL) { SysCloseLibrary(hGPUDriver); hGPUDriver = NULL; }
if (UsingIso()) {
LoadCDRplugin(NULL);
} else {
- char Plugin[MAXPATHLEN];
+ char Plugin[MAXPATHLEN * 2];
sprintf(Plugin, "%s/%s", Config.PluginsDir, Config.Cdr);
if (LoadCDRplugin(Plugin) == -1) return -1;
}
IsoFile[0] = '\0';
return;
}
- strncpy(IsoFile, filename, MAXPATHLEN);
+ strncpy(IsoFile, filename, MAXPATHLEN - 1);
}
const char *GetIsoFile(void) {
notaz.gp2x.de / pcsx_rearmed.git / blobdiff