Add support for single-line cheats and PAR codes.

[picodrive.git] / pico / pico_cmn.c

diff --git a/pico/pico_cmn.c b/pico/pico_cmn.c
index a450757..aad8406 100644 (file)
--- a/pico/pico_cmn.c
+++ b/pico/pico_cmn.c
@@ -7,7 +7,7 @@
  */
 
 #define CYCLES_M68K_LINE     488 // suitable for both PAL/NTSC
-#define CYCLES_M68K_VINT_LAG  68
+#define CYCLES_M68K_VINT_LAG 112
 
 // pad delay (for 6 button pads)
 #define PAD_DELAY() { \
@@ -108,7 +108,7 @@ static int PicoFrameHints(void)
   }
   else skip=PicoSkipFrame;
 
-  Pico.t.m68c_frame_start = SekCyclesDone();
+  Pico.t.m68c_frame_start = Pico.t.m68c_aim;
   pv->v_counter = Pico.m.scanline = 0;
   z80_resetCycles();
   PsndStartFrame();
@@ -170,7 +170,7 @@ static int PicoFrameHints(void)
     }
 
     // Run scanline:
-    Pico.t.m68c_line_start = SekCyclesDone();
+    Pico.t.m68c_line_start = Pico.t.m68c_aim;
     do_timing_hacks_as(pv, vdp_slots);
     CPUS_RUN(CYCLES_M68K_LINE);
 
@@ -205,18 +205,21 @@ static int PicoFrameHints(void)
     do_hint(pv);
   }
 
-  pv->status |= SR_VB; // go into vblank
-  pv->pending_ints |= 0x20;
+  pv->status |= SR_VB | PVS_VB2; // go into vblank
 
   // the following SekRun is there for several reasons:
   // there must be a delay after vblank bit is set and irq is asserted (Mazin Saga)
   // also delay between F bit (bit 7) is set in SR and IRQ happens (Ex-Mutants)
   // also delay between last H-int and V-int (Golden Axe 3)
-  Pico.t.m68c_line_start = SekCyclesDone();
+  Pico.t.m68c_line_start = Pico.t.m68c_aim;
   do_timing_hacks_vb();
   CPUS_RUN(CYCLES_M68K_VINT_LAG);
 
+  pv->status |= SR_F;
+  pv->pending_ints |= 0x20;
   if (pv->reg[1] & 0x20) {
+    Pico.t.m68c_aim = Pico.t.m68c_cnt + 11; // HACK
+    SekSyncM68k();
     elprintf(EL_INTS, "vint: @ %06x [%u]", SekPc, SekCyclesDone());
     SekInterrupt(6);
   }
@@ -276,7 +279,7 @@ static int PicoFrameHints(void)
     }
 
     // Run scanline:
-    Pico.t.m68c_line_start = SekCyclesDone();
+    Pico.t.m68c_line_start = Pico.t.m68c_aim;
     do_timing_hacks_vb();
     CPUS_RUN(CYCLES_M68K_LINE);
 
@@ -284,7 +287,8 @@ static int PicoFrameHints(void)
     pevt_log_m68k_o(EVT_NEXT_LINE);
   }
 
-  pv->status &= ~SR_VB;
+  pv->status &= ~(SR_VB | PVS_VB2);
+  pv->status |= ((pv->reg[1] >> 3) ^ SR_VB) & SR_VB; // forced blanking
 
   // last scanline
   Pico.m.scanline = y;
@@ -300,7 +304,7 @@ static int PicoFrameHints(void)
   }
 
   // Run scanline:
-  Pico.t.m68c_line_start = SekCyclesDone();
+  Pico.t.m68c_line_start = Pico.t.m68c_aim;
   do_timing_hacks_as(pv, vdp_slots);
   CPUS_RUN(CYCLES_M68K_LINE);