#include "externals.h"
#include "registers.h"
-#include "cfg.h"
#include "dsoundoss.h"
#ifdef ENABLE_NLS
#define N_(x) (x)
#endif
-#ifdef __arm__
+#ifdef __ARM_ARCH_7A__
#define ssat32_to_16(v) \
asm("ssat %0,#16,%1" : "=r" (v) : "r" (v))
#else
int iVolume=768; // 1024 is 1.0
int iXAPitch=1;
-int iUseTimer=2;
int iSPUIRQWait=1;
int iDebugMode=0;
int iRecordMode=0;
unsigned short spuStat=0;
unsigned short spuIrq=0;
unsigned long spuAddr=0xffffffff; // address into spu mem
-int bEndThread=0; // thread handlers
-int bThreadEnded=0;
int bSpuInit=0;
int bSPUIsOpen=0;
-static pthread_t thread = (pthread_t)-1; // thread id (linux)
-
unsigned int dwNewChannel=0; // flags for faster testing, if new channel starts
unsigned int dwChannelOn=0; // not silent channels
unsigned int dwPendingChanOff=0;
int lastch=-1; // last channel processed on spu irq in timer mode
static int lastns=0; // last ns pos
-static int iSecureStart=0; // secure start counter
+
+#define CDDA_BUFFER_SIZE (16384 * sizeof(uint32_t)) // must be power of 2
////////////////////////////////////////////////////////////////////////
// CODE AREA
s_chan[ch].SB[32]=0;
s_chan[ch].SB[28]=(s_chan[ch].SB[28]*s_chan[ch].sinc)/0x20000L;
- if(s_chan[ch].sinc<=0x8000)
- s_chan[ch].SB[29]=s_chan[ch].SB[30]-(s_chan[ch].SB[28]*((0x10000/s_chan[ch].sinc)-1));
- else s_chan[ch].SB[29]+=s_chan[ch].SB[28];
+ //if(s_chan[ch].sinc<=0x8000)
+ // s_chan[ch].SB[29]=s_chan[ch].SB[30]-(s_chan[ch].SB[28]*((0x10000/s_chan[ch].sinc)-1));
+ //else
+ s_chan[ch].SB[29]+=s_chan[ch].SB[28];
}
else // no flags? add bigger val (if possible), calc smaller step, set flag1
s_chan[ch].SB[29]+=s_chan[ch].SB[28];
////////////////////////////////////////////////////////////////////////
-INLINE int iGetInterpolationVal(int ch)
+INLINE int iGetInterpolationVal(int ch, int spos)
{
int fa;
case 3: // cubic interpolation
{
long xd;int gpos;
- xd = ((s_chan[ch].spos) >> 1)+1;
+ xd = (spos >> 1)+1;
gpos = s_chan[ch].SB[28];
fa = gval(3) - 3*gval(2) + 3*gval(1) - gval0;
case 2: // gauss interpolation
{
int vl, vr;int gpos;
- vl = (s_chan[ch].spos >> 6) & ~3;
+ vl = (spos >> 6) & ~3;
gpos = s_chan[ch].SB[28];
vr=(gauss[vl]*gval0)&~2047;
vr+=(gauss[vl+1]*gval(1))&~2047;
static void do_irq(void)
{
- if(!(spuStat & STAT_IRQ))
+ //if(!(spuStat & STAT_IRQ))
{
- spuStat |= STAT_IRQ;
+ spuStat |= STAT_IRQ; // asserted status?
if(irqCallback) irqCallback();
}
}
}
s_chan[ch].pCurr = start; // store values for next cycle
+ s_chan[ch].bJump = flags & 1;
return ret;
}
}
if(flags & 4)
- s_chan[ch].pLoop=start;
+ s_chan[ch].pLoop = start;
s_chan[ch].pCurr += 16;
if(flags & 1)
s_chan[ch].pCurr = s_chan[ch].pLoop;
+ s_chan[ch].bJump = flags & 1;
return ret;
}
make_do_samples(default, fmod_recv_check, ,
StoreInterpolationVal(ch, fa),
- ChanBuf[ns] = iGetInterpolationVal(ch), )
+ ChanBuf[ns] = iGetInterpolationVal(ch, spos), )
make_do_samples(noint, , fa = s_chan[ch].SB[29], , ChanBuf[ns] = fa, s_chan[ch].SB[29] = fa)
#define simple_interp_store \
}
#ifdef __arm__
-// asm code
+// asm code; lv and rv must be 0-3fff
extern void mix_chan(int start, int count, int lv, int rv);
extern void mix_chan_rvb(int start, int count, int lv, int rv);
#else
////////////////////////////////////////////////////////////////////////
// MAIN SPU FUNCTION
-// here is the main job handler... thread, timer or direct func call
+// here is the main job handler...
// basically the whole sound processing is done in this fat func!
////////////////////////////////////////////////////////////////////////
-// 5 ms waiting phase, if buffer is full and no new sound has to get started
-// .. can be made smaller (smallest val: 1 ms), but bigger waits give
-// better performance
-
-#define PAUSE_W 5
-#define PAUSE_L 5000
-
-////////////////////////////////////////////////////////////////////////
-
-static void *MAINThread(void *arg)
+static int do_samples(void)
{
int volmult = iVolume;
int ns,ns_from,ns_to;
int ch,d,silentch;
int bIRQReturn=0;
- while(!bEndThread) // until we are shutting down
+ while(1)
{
// ok, at the beginning we are looking if there is
// enuff free place in the dsound/oss buffer to
// until enuff free place is available/a new channel gets
// started
- if(dwNewChannel) // new channel should start immedately?
- { // (at least one bit 0 ... MAXCHANNEL is set?)
- iSecureStart++; // -> set iSecure
- if(iSecureStart>5) iSecureStart=0; // (if it is set 5 times - that means on 5 tries a new samples has been started - in a row, we will reset it, to give the sound update a chance)
- }
- else iSecureStart=0; // 0: no new channel should start
-
- while(!iSecureStart && !bEndThread && // no new start? no thread end?
- (SoundGetBytesBuffered()>TESTSIZE)) // and still enuff data in sound buffer?
+ if(!dwNewChannel && SoundGetBytesBuffered()) // still enuff data in sound buffer?
{
- iSecureStart=0; // reset secure
-
- if(iUseTimer) return 0; // linux no-thread mode? bye
- usleep(PAUSE_L); // else sleep for x ms (linux)
-
- if(dwNewChannel) iSecureStart=1; // if a new channel kicks in (or, of course, sound buffer runs low), we will leave the loop
+ return 0;
}
//--------------------------------------------------// continue from irq handling in timer mode?
{
iSpuAsyncWait=1;
bIRQReturn=0;
- if(iUseTimer!=2)
- {
- DWORD dwWatchTime=timeGetTime_spu()+2500;
-
- while(iSpuAsyncWait && !bEndThread &&
- timeGetTime_spu()<dwWatchTime)
- usleep(1000L);
- continue;
- }
- else
- {
- return 0;
- }
+ return 0;
}
}
}
- // end of big main loop...
-
- bThreadEnded = 1;
-
return 0;
}
// SPU ASYNC... even newer epsxe func
// 1 time every 'cycle' cycles... harhar
+// rearmed: called every 2ms now
+
void CALLBACK SPUasync(unsigned long cycle)
{
+ if(!bSpuInit) return; // -> no init, no call
+
if(iSpuAsyncWait)
{
iSpuAsyncWait++;
iSpuAsyncWait=0;
}
- if(iUseTimer==2) // special mode, only used in Linux by this spu (or if you enable the experimental Windows mode)
- {
- if(!bSpuInit) return; // -> no init, no call
-
- MAINThread(0); // -> linux high-compat mode
-
- // abuse iSpuAsyncWait mechanism to reduce calls to above function
- // to make it do larger chunks
- // note: doing it less often than once per frame causes skips
- iSpuAsyncWait=1;
- }
+ do_samples();
}
// SPU UPDATE... new epsxe func
}
// CDDA AUDIO
-void CALLBACK SPUplayCDDAchannel(short *pcm, int nbytes)
+int CALLBACK SPUplayCDDAchannel(short *pcm, int nbytes)
{
- if (!pcm) return;
- if (nbytes<=0) return;
+ if (!pcm) return -1;
+ if (nbytes<=0) return -1;
- FeedCDDA((unsigned char *)pcm, nbytes);
+ return FeedCDDA((unsigned char *)pcm, nbytes);
}
-// SETUPTIMER: init of certain buffers and threads/timers
-void SetupTimer(void)
+// to be called after state load
+void ClearWorkingState(void)
{
memset(SSumLR,0,sizeof(SSumLR)); // init some mixing buffers
- memset(iFMod,0,NSSIZE*sizeof(int));
+ memset(iFMod,0,sizeof(iFMod));
pS=(short *)pSpuBuffer; // setup soundbuffer pointer
-
- bEndThread=0; // init thread vars
- bThreadEnded=0;
- bSpuInit=1; // flag: we are inited
-
- if(!iUseTimer) // linux: use thread
- {
- pthread_create(&thread, NULL, MAINThread, NULL);
- }
-}
-
-// REMOVETIMER: kill threads/timers
-void RemoveTimer(void)
-{
- bEndThread=1; // raise flag to end thread
-
- if(!iUseTimer) // linux tread?
- {
- int i=0;
- while(!bThreadEnded && i<2000) {usleep(1000L);i++;} // -> wait until thread has ended
- if(thread!=(pthread_t)-1) {pthread_cancel(thread);thread=(pthread_t)-1;} // -> cancel thread anyway
- }
-
- bThreadEnded=0; // no more spu is running
- bSpuInit=0;
}
// SETUPSTREAMS: init most of the spu buffers
XAFeed = XAStart;
CDDAStart = // alloc cdda buffer
- (uint32_t *)malloc(16384 * sizeof(uint32_t));
+ (uint32_t *)malloc(CDDA_BUFFER_SIZE);
CDDAEnd = CDDAStart + 16384;
CDDAPlay = CDDAStart;
CDDAFeed = CDDAStart;
s_chan[i].pCurr=spuMemC;
}
- pMixIrq=spuMemC; // enable decoded buffer irqs by setting the address
+ pMixIrq=spuMemC; // enable decoded buffer irqs by setting the address
+
+ ClearWorkingState();
+
+ bSpuInit=1; // flag: we are inited
}
// REMOVESTREAMS: free most buffer
spuIrq = 0;
spuAddr = 0xffffffff;
- bEndThread = 0;
- bThreadEnded = 0;
spuMemC = (unsigned char *)spuMem;
pMixIrq = 0;
memset((void *)s_chan, 0, (MAXCHAN + 1) * sizeof(SPUCHAN));
//iSPUIRQWait = 0;
lastch = -1;
- //ReadConfigSPU(); // read user stuff
SetupStreams(); // prepare streaming
return 0;
if (bSPUIsOpen) return 0; // security for some stupid main emus
SetupSound(); // setup sound (before init!)
- SetupTimer(); // timer for feeding data
bSPUIsOpen = 1;
bSPUIsOpen = 0; // no more open
- RemoveTimer(); // no more feeding
RemoveSound(); // no more sound handling
return 0;
{
SPUclose();
RemoveStreams(); // no more streaming
+ bSpuInit=0;
return 0;
}