testpico: check busy after dma

[megadrive.git] / teensy3 / pins_arduino.h

diff --git a/teensy3/pins_arduino.h b/teensy3/pins_arduino.h
deleted file mode 100644 (file)
index 55f9e90..0000000
--- a/teensy3/pins_arduino.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/* Teensyduino Core Library
- * http://www.pjrc.com/teensy/
- * Copyright (c) 2013 PJRC.COM, LLC.
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sublicense, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * 1. The above copyright notice and this permission notice shall be 
- * included in all copies or substantial portions of the Software.
- *
- * 2. If the Software is incorporated into a build system that allows 
- * selection among a list of target devices, then similar target
- * devices manufactured by PJRC.COM must be included in the list of
- * target devices and selectable in the same manner.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef pins_macros_for_arduino_compatibility_h
-#define pins_macros_for_arduino_compatibility_h
-
-#include <stdint.h>
-
-const static uint8_t A0 = 14;
-const static uint8_t A1 = 15;
-const static uint8_t A2 = 16;
-const static uint8_t A3 = 17;
-const static uint8_t A4 = 18;
-const static uint8_t A5 = 19;
-const static uint8_t A6 = 20;
-const static uint8_t A7 = 21;
-const static uint8_t A8 = 22;
-const static uint8_t A9 = 23;
-const static uint8_t A10 = 34;
-const static uint8_t A11 = 35;
-const static uint8_t A12 = 36;
-const static uint8_t A13 = 37;
-const static uint8_t A14 = 40;
-
-const static uint8_t A15 = 26;
-const static uint8_t A16 = 27;
-const static uint8_t A17 = 28;
-const static uint8_t A18 = 29;
-const static uint8_t A19 = 30;
-const static uint8_t A20 = 31;
-
-const static uint8_t SS = 10;
-const static uint8_t MOSI = 11;
-const static uint8_t MISO = 12;
-const static uint8_t SCK = 13;
-const static uint8_t LED_BUILTIN = 13;
-const static uint8_t SDA = 18;
-const static uint8_t SCL = 19;
-
-
-#define NUM_DIGITAL_PINS 34
-#define NUM_ANALOG_INPUTS 14
-
-#define analogInputToDigitalPin(p) (((p) < 10) ? (p) + 14 : -1)
-#define digitalPinHasPWM(p) (((p) >= 3 && (p) <= 6) || (p) == 9 || (p) == 10 || ((p) >= 20 && (p) <= 23))
-
-#define NOT_AN_INTERRUPT -1
-#define digitalPinToInterrupt(p)  ((p) < NUM_DIGITAL_PINS ? (p) : -1)
-
-
-struct digital_pin_bitband_and_config_table_struct {
-        volatile uint32_t *reg;
-        volatile uint32_t *config;
-};
-extern const struct digital_pin_bitband_and_config_table_struct digital_pin_to_info_PGM[];
-
-// compatibility macros
-#define digitalPinToPort(pin) (pin)
-#define digitalPinToBitMask(pin) (1)
-#define portOutputRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 0))
-#define portSetRegister(pin)    ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 32))
-#define portClearRegister(pin)  ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 64))
-#define portToggleRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 96))
-#define portInputRegister(pin)  ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 128))
-#define portModeRegister(pin)   ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 160))
-#define portConfigRegister(pin) ((volatile uint32_t *)(digital_pin_to_info_PGM[(pin)].config))
-
-
-#define digitalPinToPortReg(pin) (portOutputRegister(pin))
-#define digitalPinToBit(pin) (1)
-
-
-#define NOT_ON_TIMER 0
-static inline uint8_t digitalPinToTimer(uint8_t) __attribute__((always_inline, unused));
-static inline uint8_t digitalPinToTimer(uint8_t pin)
-{
-       if (pin >= 3 && pin <= 6) return pin - 2;
-       if (pin >= 9 && pin <= 10) return pin - 4;
-       if (pin >= 20 && pin <= 23) return pin - 13;
-       return NOT_ON_TIMER;
-}
-
-
-
-
-#endif