+++ /dev/null
-/* Teensyduino Core Library
- * http://www.pjrc.com/teensy/
- * Copyright (c) 2013 PJRC.COM, LLC.
- *
- * Permission is hereby granted, free of charge, to any person obtaining
- * a copy of this software and associated documentation files (the
- * "Software"), to deal in the Software without restriction, including
- * without limitation the rights to use, copy, modify, merge, publish,
- * distribute, sublicense, and/or sell copies of the Software, and to
- * permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * 1. The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * 2. If the Software is incorporated into a build system that allows
- * selection among a list of target devices, then similar target
- * devices manufactured by PJRC.COM must be included in the list of
- * target devices and selectable in the same manner.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- * SOFTWARE.
- */
-
-#ifndef _usb_desc_h_
-#define _usb_desc_h_
-
-// This header is NOT meant to be included when compiling
-// user sketches in Arduino. The low-level functions
-// provided by usb_dev.c are meant to be called only by
-// code which provides higher-level interfaces to the user.
-
-#include <stdint.h>
-#include <stddef.h>
-
-#define ENDPOINT_UNUSED 0x00
-#define ENDPOINT_TRANSIMIT_ONLY 0x15
-#define ENDPOINT_RECEIVE_ONLY 0x19
-#define ENDPOINT_TRANSMIT_AND_RECEIVE 0x1D
-
-/*
-To modify a USB Type to have different interfaces, start in this
-file. Delete the XYZ_INTERFACE lines for any interfaces you
-wish to remove, and copy them from another USB Type for any you
-want to add.
-
-Give each interface a unique number, and edit NUM_INTERFACE to
-reflect the number of interfaces.
-
-Within each interface, make sure it uses a unique set of endpoints.
-Edit NUM_ENDPOINTS to be at least the largest endpoint number used.
-Then edit the ENDPOINT*_CONFIG lines so each endpoint is configured
-the proper way (transmit, receive, or both).
-
-The CONFIG_DESC_SIZE and any XYZ_DESC_OFFSET numbers must be
-edited to the correct sizes. See usb_desc.c for the giant array
-of bytes. Someday these may be done automatically..... (but how?)
-
-If you are using existing interfaces, the code in each file should
-automatically adapt to the changes you specify. If you need to
-create a new type of interface, you'll need to write the code which
-sends and receives packets, and presents an API to the user.
-
-Finally, edit usb_inst.cpp, which creats instances of the C++
-objects for each combination.
-
-Some operating systems, especially Windows, may cache USB device
-info. Changes to the device name may not update on the same
-computer unless the vendor or product ID numbers change, or the
-"bcdDevice" revision code is increased.
-
-If these instructions are missing steps or could be improved, please
-let me know? http://forum.pjrc.com/forums/4-Suggestions-amp-Bug-Reports
-*/
-
-
-
-#if defined(USB_SERIAL)
- #define VENDOR_ID 0x16C0
- #define PRODUCT_ID 0x0483
- #define DEVICE_CLASS 2 // 2 = Communication Class
- #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
- #define MANUFACTURER_NAME_LEN 11
- #define PRODUCT_NAME {'U','S','B',' ','S','e','r','i','a','l'}
- #define PRODUCT_NAME_LEN 10
- #define EP0_SIZE 64
- #define NUM_ENDPOINTS 4
- #define NUM_USB_BUFFERS 12
- #define NUM_INTERFACE 2
- #define CDC_STATUS_INTERFACE 0
- #define CDC_DATA_INTERFACE 1
- #define CDC_ACM_ENDPOINT 2
- #define CDC_RX_ENDPOINT 3
- #define CDC_TX_ENDPOINT 4
- #define CDC_ACM_SIZE 16
- #define CDC_RX_SIZE 64
- #define CDC_TX_SIZE 64
- #define CONFIG_DESC_SIZE (9+9+5+5+4+5+7+9+7+7)
- #define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY
- #define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
-
-#elif defined(USB_HID)
- #define VENDOR_ID 0x16C0
- #define PRODUCT_ID 0x0482
- #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
- #define MANUFACTURER_NAME_LEN 11
- #define PRODUCT_NAME {'K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
- #define PRODUCT_NAME_LEN 23
- #define EP0_SIZE 64
- #define NUM_ENDPOINTS 5
- #define NUM_USB_BUFFERS 24
- #define NUM_INTERFACE 4
- #define SEREMU_INTERFACE 2 // Serial emulation
- #define SEREMU_TX_ENDPOINT 1
- #define SEREMU_TX_SIZE 64
- #define SEREMU_TX_INTERVAL 1
- #define SEREMU_RX_ENDPOINT 2
- #define SEREMU_RX_SIZE 32
- #define SEREMU_RX_INTERVAL 2
- #define KEYBOARD_INTERFACE 0 // Keyboard
- #define KEYBOARD_ENDPOINT 3
- #define KEYBOARD_SIZE 8
- #define KEYBOARD_INTERVAL 1
- #define MOUSE_INTERFACE 1 // Mouse
- #define MOUSE_ENDPOINT 5
- #define MOUSE_SIZE 8
- #define MOUSE_INTERVAL 1
- #define JOYSTICK_INTERFACE 3 // Joystick
- #define JOYSTICK_ENDPOINT 4
- #define JOYSTICK_SIZE 16
- #define JOYSTICK_INTERVAL 2
- #define KEYBOARD_DESC_OFFSET (9 + 9)
- #define MOUSE_DESC_OFFSET (9 + 9+9+7 + 9)
- #define SEREMU_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 9)
- #define JOYSTICK_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9)
- #define CONFIG_DESC_SIZE (9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9+9+7)
- #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
- #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
-
-#elif defined(USB_SERIAL_HID)
- #define VENDOR_ID 0x16C0
- #define PRODUCT_ID 0x0487
- #define DEVICE_CLASS 0xEF
- #define DEVICE_SUBCLASS 0x02
- #define DEVICE_PROTOCOL 0x01
- #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
- #define MANUFACTURER_NAME_LEN 11
- #define PRODUCT_NAME {'S','e','r','i','a','l','/','K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
- #define PRODUCT_NAME_LEN 30
- #define EP0_SIZE 64
- #define NUM_ENDPOINTS 6
- #define NUM_USB_BUFFERS 30
- #define NUM_INTERFACE 5
- #define CDC_IAD_DESCRIPTOR 1
- #define CDC_STATUS_INTERFACE 0
- #define CDC_DATA_INTERFACE 1 // Serial
- #define CDC_ACM_ENDPOINT 2
- #define CDC_RX_ENDPOINT 3
- #define CDC_TX_ENDPOINT 4
- #define CDC_ACM_SIZE 16
- #define CDC_RX_SIZE 64
- #define CDC_TX_SIZE 64
- #define KEYBOARD_INTERFACE 2 // Keyboard
- #define KEYBOARD_ENDPOINT 1
- #define KEYBOARD_SIZE 8
- #define KEYBOARD_INTERVAL 1
- #define MOUSE_INTERFACE 3 // Mouse
- #define MOUSE_ENDPOINT 5
- #define MOUSE_SIZE 8
- #define MOUSE_INTERVAL 2
- #define JOYSTICK_INTERFACE 4 // Joystick
- #define JOYSTICK_ENDPOINT 6
- #define JOYSTICK_SIZE 16
- #define JOYSTICK_INTERVAL 1
- #define KEYBOARD_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9)
- #define MOUSE_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)
- #define JOYSTICK_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9)
- #define CONFIG_DESC_SIZE (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9+9+7)
- #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY
- #define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT6_CONFIG ENDPOINT_TRANSIMIT_ONLY
-
-#elif defined(USB_MIDI)
- #define VENDOR_ID 0x16C0
- #define PRODUCT_ID 0x0485
- #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
- #define MANUFACTURER_NAME_LEN 11
- #define PRODUCT_NAME {'T','e','e','n','s','y',' ','M','I','D','I'}
- #define PRODUCT_NAME_LEN 11
- #define EP0_SIZE 64
- #define NUM_ENDPOINTS 4
- #define NUM_USB_BUFFERS 16
- #define NUM_INTERFACE 2
- #define SEREMU_INTERFACE 1 // Serial emulation
- #define SEREMU_TX_ENDPOINT 1
- #define SEREMU_TX_SIZE 64
- #define SEREMU_TX_INTERVAL 1
- #define SEREMU_RX_ENDPOINT 2
- #define SEREMU_RX_SIZE 32
- #define SEREMU_RX_INTERVAL 2
- #define MIDI_INTERFACE 0 // MIDI
- #define MIDI_TX_ENDPOINT 3
- #define MIDI_TX_SIZE 64
- #define MIDI_RX_ENDPOINT 4
- #define MIDI_RX_SIZE 64
- #define SEREMU_DESC_OFFSET (9 + 9+7+6+6+9+9+9+5+9+5 + 9)
- #define CONFIG_DESC_SIZE (9 + 9+7+6+6+9+9+9+5+9+5 + 9+9+7+7)
- #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
- #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
-
-#elif defined(USB_RAWHID)
- #define VENDOR_ID 0x16C0
- #define PRODUCT_ID 0x0486
- #define RAWHID_USAGE_PAGE 0xFFAB // recommended: 0xFF00 to 0xFFFF
- #define RAWHID_USAGE 0x0200 // recommended: 0x0100 to 0xFFFF
- #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
- #define MANUFACTURER_NAME_LEN 11
- #define PRODUCT_NAME {'T','e','e','n','s','y','d','u','i','n','o',' ','R','a','w','H','I','D'}
- #define PRODUCT_NAME_LEN 18
- #define EP0_SIZE 64
- #define NUM_ENDPOINTS 6
- #define NUM_USB_BUFFERS 12
- #define NUM_INTERFACE 2
- #define RAWHID_INTERFACE 0 // RawHID
- #define RAWHID_TX_ENDPOINT 3
- #define RAWHID_TX_SIZE 64
- #define RAWHID_TX_INTERVAL 1
- #define RAWHID_RX_ENDPOINT 4
- #define RAWHID_RX_SIZE 64
- #define RAWHID_RX_INTERVAL 1
- #define SEREMU_INTERFACE 1 // Serial emulation
- #define SEREMU_TX_ENDPOINT 1
- #define SEREMU_TX_SIZE 64
- #define SEREMU_TX_INTERVAL 1
- #define SEREMU_RX_ENDPOINT 2
- #define SEREMU_RX_SIZE 32
- #define SEREMU_RX_INTERVAL 2
- #define RAWHID_DESC_OFFSET (9 + 9)
- #define SEREMU_DESC_OFFSET (9 + 9+9+7+7 + 9)
- #define CONFIG_DESC_SIZE (9 + 9+9+7+7 + 9+9+7+7)
- #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
- #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
-
-#elif defined(USB_FLIGHTSIM)
- #define VENDOR_ID 0x16C0
- #define PRODUCT_ID 0x0488
- #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
- #define MANUFACTURER_NAME_LEN 11
- #define PRODUCT_NAME {'T','e','e','n','s','y',' ','F','l','i','g','h','t',' ','S','i','m',' ','C','o','n','t','r','o','l','s'}
- #define PRODUCT_NAME_LEN 26
- #define EP0_SIZE 64
- #define NUM_ENDPOINTS 4
- #define NUM_USB_BUFFERS 20
- #define NUM_INTERFACE 2
- #define FLIGHTSIM_INTERFACE 0 // Flight Sim Control
- #define FLIGHTSIM_TX_ENDPOINT 3
- #define FLIGHTSIM_TX_SIZE 64
- #define FLIGHTSIM_TX_INTERVAL 1
- #define FLIGHTSIM_RX_ENDPOINT 4
- #define FLIGHTSIM_RX_SIZE 64
- #define FLIGHTSIM_RX_INTERVAL 1
- #define SEREMU_INTERFACE 1 // Serial emulation
- #define SEREMU_TX_ENDPOINT 1
- #define SEREMU_TX_SIZE 64
- #define SEREMU_TX_INTERVAL 1
- #define SEREMU_RX_ENDPOINT 2
- #define SEREMU_RX_SIZE 32
- #define SEREMU_RX_INTERVAL 2
- #define FLIGHTSIM_DESC_OFFSET (9 + 9)
- #define SEREMU_DESC_OFFSET (9 + 9+9+7+7 + 9)
- #define CONFIG_DESC_SIZE (9 + 9+9+7+7 + 9+9+7+7)
- #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
- #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
- #define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
-
-#endif
-
-// NUM_ENDPOINTS = number of non-zero endpoints (0 to 15)
-extern const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS];
-
-typedef struct {
- uint16_t wValue;
- uint16_t wIndex;
- const uint8_t *addr;
- uint16_t length;
-} usb_descriptor_list_t;
-
-extern const usb_descriptor_list_t usb_descriptor_list[];
-
-
-#endif
notaz.gp2x.de / megadrive.git / blobdiff