--- /dev/null
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2013 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef pins_macros_for_arduino_compatibility_h
+#define pins_macros_for_arduino_compatibility_h
+
+#include <stdint.h>
+
+const static uint8_t A0 = 14;
+const static uint8_t A1 = 15;
+const static uint8_t A2 = 16;
+const static uint8_t A3 = 17;
+const static uint8_t A4 = 18;
+const static uint8_t A5 = 19;
+const static uint8_t A6 = 20;
+const static uint8_t A7 = 21;
+const static uint8_t A8 = 22;
+const static uint8_t A9 = 23;
+const static uint8_t A10 = 34;
+const static uint8_t A11 = 35;
+const static uint8_t A12 = 36;
+const static uint8_t A13 = 37;
+const static uint8_t A14 = 40;
+
+const static uint8_t A15 = 26;
+const static uint8_t A16 = 27;
+const static uint8_t A17 = 28;
+const static uint8_t A18 = 29;
+const static uint8_t A19 = 30;
+const static uint8_t A20 = 31;
+
+const static uint8_t SS = 10;
+const static uint8_t MOSI = 11;
+const static uint8_t MISO = 12;
+const static uint8_t SCK = 13;
+const static uint8_t LED_BUILTIN = 13;
+const static uint8_t SDA = 18;
+const static uint8_t SCL = 19;
+
+
+#define NUM_DIGITAL_PINS 34
+#define NUM_ANALOG_INPUTS 14
+
+#define analogInputToDigitalPin(p) (((p) < 10) ? (p) + 14 : -1)
+#define digitalPinHasPWM(p) (((p) >= 3 && (p) <= 6) || (p) == 9 || (p) == 10 || ((p) >= 20 && (p) <= 23))
+
+#define NOT_AN_INTERRUPT -1
+#define digitalPinToInterrupt(p) ((p) < NUM_DIGITAL_PINS ? (p) : -1)
+
+
+struct digital_pin_bitband_and_config_table_struct {
+ volatile uint32_t *reg;
+ volatile uint32_t *config;
+};
+extern const struct digital_pin_bitband_and_config_table_struct digital_pin_to_info_PGM[];
+
+// compatibility macros
+#define digitalPinToPort(pin) (pin)
+#define digitalPinToBitMask(pin) (1)
+#define portOutputRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 0))
+#define portSetRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 32))
+#define portClearRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 64))
+#define portToggleRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 96))
+#define portInputRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 128))
+#define portModeRegister(pin) ((volatile uint8_t *)(digital_pin_to_info_PGM[(pin)].reg + 160))
+#define portConfigRegister(pin) ((volatile uint32_t *)(digital_pin_to_info_PGM[(pin)].config))
+
+
+#define digitalPinToPortReg(pin) (portOutputRegister(pin))
+#define digitalPinToBit(pin) (1)
+
+
+#define NOT_ON_TIMER 0
+static inline uint8_t digitalPinToTimer(uint8_t) __attribute__((always_inline, unused));
+static inline uint8_t digitalPinToTimer(uint8_t pin)
+{
+ if (pin >= 3 && pin <= 6) return pin - 2;
+ if (pin >= 9 && pin <= 10) return pin - 4;
+ if (pin >= 20 && pin <= 23) return pin - 13;
+ return NOT_ON_TIMER;
+}
+
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+// pins are NOT connected to anything by default.
+//
+#define SERIAL_PORT_MONITOR Serial
+#define SERIAL_PORT_USBVIRTUAL Serial
+#define SERIAL_PORT_HARDWARE Serial1
+#define SERIAL_PORT_HARDWARE1 Serial2
+#define SERIAL_PORT_HARDWARE2 Serial3
+#define SERIAL_PORT_HARDWARE_OPEN Serial1
+#define SERIAL_PORT_HARDWARE_OPEN1 Serial2
+#define SERIAL_PORT_HARDWARE_OPEN2 Serial3
+
+
+#endif
notaz.gp2x.de / megadrive.git / blobdiff