--- /dev/null
+/* Teensyduino Core Library
+ * http://www.pjrc.com/teensy/
+ * Copyright (c) 2013 PJRC.COM, LLC.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining
+ * a copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sublicense, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * 1. The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * 2. If the Software is incorporated into a build system that allows
+ * selection among a list of target devices, then similar target
+ * devices manufactured by PJRC.COM must be included in the list of
+ * target devices and selectable in the same manner.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef _usb_desc_h_
+#define _usb_desc_h_
+
+#if F_CPU >= 20000000
+
+// This header is NOT meant to be included when compiling
+// user sketches in Arduino. The low-level functions
+// provided by usb_dev.c are meant to be called only by
+// code which provides higher-level interfaces to the user.
+
+#include <stdint.h>
+#include <stddef.h>
+
+#define ENDPOINT_UNUSED 0x00
+#define ENDPOINT_TRANSIMIT_ONLY 0x15
+#define ENDPOINT_RECEIVE_ONLY 0x19
+#define ENDPOINT_TRANSMIT_AND_RECEIVE 0x1D
+
+/*
+To modify a USB Type to have different interfaces, start in this
+file. Delete the XYZ_INTERFACE lines for any interfaces you
+wish to remove, and copy them from another USB Type for any you
+want to add.
+
+Give each interface a unique number, and edit NUM_INTERFACE to
+reflect the number of interfaces.
+
+Within each interface, make sure it uses a unique set of endpoints.
+Edit NUM_ENDPOINTS to be at least the largest endpoint number used.
+Then edit the ENDPOINT*_CONFIG lines so each endpoint is configured
+the proper way (transmit, receive, or both).
+
+The CONFIG_DESC_SIZE and any XYZ_DESC_OFFSET numbers must be
+edited to the correct sizes. See usb_desc.c for the giant array
+of bytes. Someday these may be done automatically..... (but how?)
+
+If you are using existing interfaces, the code in each file should
+automatically adapt to the changes you specify. If you need to
+create a new type of interface, you'll need to write the code which
+sends and receives packets, and presents an API to the user.
+
+Finally, edit usb_inst.cpp, which creats instances of the C++
+objects for each combination.
+
+Some operating systems, especially Windows, may cache USB device
+info. Changes to the device name may not update on the same
+computer unless the vendor or product ID numbers change, or the
+"bcdDevice" revision code is increased.
+
+If these instructions are missing steps or could be improved, please
+let me know? http://forum.pjrc.com/forums/4-Suggestions-amp-Bug-Reports
+*/
+
+
+
+#if defined(USB_SERIAL)
+ #define VENDOR_ID 0x16C0
+ #define PRODUCT_ID 0x0483
+ #define DEVICE_CLASS 2 // 2 = Communication Class
+ #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
+ #define MANUFACTURER_NAME_LEN 11
+ #define PRODUCT_NAME {'U','S','B',' ','S','e','r','i','a','l'}
+ #define PRODUCT_NAME_LEN 10
+ #define EP0_SIZE 64
+ #define NUM_ENDPOINTS 4
+ #define NUM_USB_BUFFERS 12
+ #define NUM_INTERFACE 2
+ #define CDC_STATUS_INTERFACE 0
+ #define CDC_DATA_INTERFACE 1
+ #define CDC_ACM_ENDPOINT 2
+ #define CDC_RX_ENDPOINT 3
+ #define CDC_TX_ENDPOINT 4
+ #define CDC_ACM_SIZE 16
+ #define CDC_RX_SIZE 64
+ #define CDC_TX_SIZE 64
+ #define CONFIG_DESC_SIZE (9+9+5+5+4+5+7+9+7+7)
+ #define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY
+ #define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
+
+#elif defined(USB_HID)
+ #define VENDOR_ID 0x16C0
+ #define PRODUCT_ID 0x0482
+ #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
+ #define MANUFACTURER_NAME_LEN 11
+ #define PRODUCT_NAME {'K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
+ #define PRODUCT_NAME_LEN 23
+ #define EP0_SIZE 64
+ #define NUM_ENDPOINTS 5
+ #define NUM_USB_BUFFERS 24
+ #define NUM_INTERFACE 4
+ #define SEREMU_INTERFACE 2 // Serial emulation
+ #define SEREMU_TX_ENDPOINT 1
+ #define SEREMU_TX_SIZE 64
+ #define SEREMU_TX_INTERVAL 1
+ #define SEREMU_RX_ENDPOINT 2
+ #define SEREMU_RX_SIZE 32
+ #define SEREMU_RX_INTERVAL 2
+ #define KEYBOARD_INTERFACE 0 // Keyboard
+ #define KEYBOARD_ENDPOINT 3
+ #define KEYBOARD_SIZE 8
+ #define KEYBOARD_INTERVAL 1
+ #define MOUSE_INTERFACE 1 // Mouse
+ #define MOUSE_ENDPOINT 5
+ #define MOUSE_SIZE 8
+ #define MOUSE_INTERVAL 1
+ #define JOYSTICK_INTERFACE 3 // Joystick
+ #define JOYSTICK_ENDPOINT 4
+ #define JOYSTICK_SIZE 16
+ #define JOYSTICK_INTERVAL 2
+ #define KEYBOARD_DESC_OFFSET (9 + 9)
+ #define MOUSE_DESC_OFFSET (9 + 9+9+7 + 9)
+ #define SEREMU_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 9)
+ #define JOYSTICK_DESC_OFFSET (9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9)
+ #define CONFIG_DESC_SIZE (9 + 9+9+7 + 9+9+7 + 9+9+7+7 + 9+9+7)
+ #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
+ #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
+
+#elif defined(USB_SERIAL_HID)
+ #define VENDOR_ID 0x16C0
+ #define PRODUCT_ID 0x0487
+ #define DEVICE_CLASS 0xEF
+ #define DEVICE_SUBCLASS 0x02
+ #define DEVICE_PROTOCOL 0x01
+ #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
+ #define MANUFACTURER_NAME_LEN 11
+ #define PRODUCT_NAME {'S','e','r','i','a','l','/','K','e','y','b','o','a','r','d','/','M','o','u','s','e','/','J','o','y','s','t','i','c','k'}
+ #define PRODUCT_NAME_LEN 30
+ #define EP0_SIZE 64
+ #define NUM_ENDPOINTS 6
+ #define NUM_USB_BUFFERS 30
+ #define NUM_INTERFACE 5
+ #define CDC_IAD_DESCRIPTOR 1
+ #define CDC_STATUS_INTERFACE 0
+ #define CDC_DATA_INTERFACE 1 // Serial
+ #define CDC_ACM_ENDPOINT 2
+ #define CDC_RX_ENDPOINT 3
+ #define CDC_TX_ENDPOINT 4
+ #define CDC_ACM_SIZE 16
+ #define CDC_RX_SIZE 64
+ #define CDC_TX_SIZE 64
+ #define KEYBOARD_INTERFACE 2 // Keyboard
+ #define KEYBOARD_ENDPOINT 1
+ #define KEYBOARD_SIZE 8
+ #define KEYBOARD_INTERVAL 1
+ #define MOUSE_INTERFACE 3 // Mouse
+ #define MOUSE_ENDPOINT 5
+ #define MOUSE_SIZE 8
+ #define MOUSE_INTERVAL 2
+ #define JOYSTICK_INTERFACE 4 // Joystick
+ #define JOYSTICK_ENDPOINT 6
+ #define JOYSTICK_SIZE 16
+ #define JOYSTICK_INTERVAL 1
+ #define KEYBOARD_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9)
+ #define MOUSE_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9)
+ #define JOYSTICK_DESC_OFFSET (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9)
+ #define CONFIG_DESC_SIZE (9+8 + 9+5+5+4+5+7+9+7+7 + 9+9+7 + 9+9+7 + 9+9+7)
+ #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT2_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT3_CONFIG ENDPOINT_RECEIVE_ONLY
+ #define ENDPOINT4_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT5_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT6_CONFIG ENDPOINT_TRANSIMIT_ONLY
+
+#elif defined(USB_MIDI)
+ #define VENDOR_ID 0x16C0
+ #define PRODUCT_ID 0x0485
+ #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
+ #define MANUFACTURER_NAME_LEN 11
+ #define PRODUCT_NAME {'T','e','e','n','s','y',' ','M','I','D','I'}
+ #define PRODUCT_NAME_LEN 11
+ #define EP0_SIZE 64
+ #define NUM_ENDPOINTS 4
+ #define NUM_USB_BUFFERS 16
+ #define NUM_INTERFACE 2
+ #define SEREMU_INTERFACE 1 // Serial emulation
+ #define SEREMU_TX_ENDPOINT 1
+ #define SEREMU_TX_SIZE 64
+ #define SEREMU_TX_INTERVAL 1
+ #define SEREMU_RX_ENDPOINT 2
+ #define SEREMU_RX_SIZE 32
+ #define SEREMU_RX_INTERVAL 2
+ #define MIDI_INTERFACE 0 // MIDI
+ #define MIDI_TX_ENDPOINT 3
+ #define MIDI_TX_SIZE 64
+ #define MIDI_RX_ENDPOINT 4
+ #define MIDI_RX_SIZE 64
+ #define SEREMU_DESC_OFFSET (9 + 9+7+6+6+9+9+9+5+9+5 + 9)
+ #define CONFIG_DESC_SIZE (9 + 9+7+6+6+9+9+9+5+9+5 + 9+9+7+7)
+ #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
+ #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_RAWHID)
+ #define VENDOR_ID 0x16C0
+ #define PRODUCT_ID 0x0486
+ #define RAWHID_USAGE_PAGE 0xFFAB // recommended: 0xFF00 to 0xFFFF
+ #define RAWHID_USAGE 0x0200 // recommended: 0x0100 to 0xFFFF
+ #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
+ #define MANUFACTURER_NAME_LEN 11
+ #define PRODUCT_NAME {'T','e','e','n','s','y','d','u','i','n','o',' ','R','a','w','H','I','D'}
+ #define PRODUCT_NAME_LEN 18
+ #define EP0_SIZE 64
+ #define NUM_ENDPOINTS 6
+ #define NUM_USB_BUFFERS 12
+ #define NUM_INTERFACE 2
+ #define RAWHID_INTERFACE 0 // RawHID
+ #define RAWHID_TX_ENDPOINT 3
+ #define RAWHID_TX_SIZE 64
+ #define RAWHID_TX_INTERVAL 1
+ #define RAWHID_RX_ENDPOINT 4
+ #define RAWHID_RX_SIZE 64
+ #define RAWHID_RX_INTERVAL 1
+ #define SEREMU_INTERFACE 1 // Serial emulation
+ #define SEREMU_TX_ENDPOINT 1
+ #define SEREMU_TX_SIZE 64
+ #define SEREMU_TX_INTERVAL 1
+ #define SEREMU_RX_ENDPOINT 2
+ #define SEREMU_RX_SIZE 32
+ #define SEREMU_RX_INTERVAL 2
+ #define RAWHID_DESC_OFFSET (9 + 9)
+ #define SEREMU_DESC_OFFSET (9 + 9+9+7+7 + 9)
+ #define CONFIG_DESC_SIZE (9 + 9+9+7+7 + 9+9+7+7)
+ #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
+ #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
+
+#elif defined(USB_FLIGHTSIM)
+ #define VENDOR_ID 0x16C0
+ #define PRODUCT_ID 0x0488
+ #define MANUFACTURER_NAME {'T','e','e','n','s','y','d','u','i','n','o'}
+ #define MANUFACTURER_NAME_LEN 11
+ #define PRODUCT_NAME {'T','e','e','n','s','y',' ','F','l','i','g','h','t',' ','S','i','m',' ','C','o','n','t','r','o','l','s'}
+ #define PRODUCT_NAME_LEN 26
+ #define EP0_SIZE 64
+ #define NUM_ENDPOINTS 4
+ #define NUM_USB_BUFFERS 20
+ #define NUM_INTERFACE 2
+ #define FLIGHTSIM_INTERFACE 0 // Flight Sim Control
+ #define FLIGHTSIM_TX_ENDPOINT 3
+ #define FLIGHTSIM_TX_SIZE 64
+ #define FLIGHTSIM_TX_INTERVAL 1
+ #define FLIGHTSIM_RX_ENDPOINT 4
+ #define FLIGHTSIM_RX_SIZE 64
+ #define FLIGHTSIM_RX_INTERVAL 1
+ #define SEREMU_INTERFACE 1 // Serial emulation
+ #define SEREMU_TX_ENDPOINT 1
+ #define SEREMU_TX_SIZE 64
+ #define SEREMU_TX_INTERVAL 1
+ #define SEREMU_RX_ENDPOINT 2
+ #define SEREMU_RX_SIZE 32
+ #define SEREMU_RX_INTERVAL 2
+ #define FLIGHTSIM_DESC_OFFSET (9 + 9)
+ #define SEREMU_DESC_OFFSET (9 + 9+9+7+7 + 9)
+ #define CONFIG_DESC_SIZE (9 + 9+9+7+7 + 9+9+7+7)
+ #define ENDPOINT1_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT2_CONFIG ENDPOINT_RECEIVE_ONLY
+ #define ENDPOINT3_CONFIG ENDPOINT_TRANSIMIT_ONLY
+ #define ENDPOINT4_CONFIG ENDPOINT_RECEIVE_ONLY
+
+#endif
+
+#ifdef NUM_ENDPOINTS
+// NUM_ENDPOINTS = number of non-zero endpoints (0 to 15)
+extern const uint8_t usb_endpoint_config_table[NUM_ENDPOINTS];
+
+typedef struct {
+ uint16_t wValue;
+ uint16_t wIndex;
+ const uint8_t *addr;
+ uint16_t length;
+} usb_descriptor_list_t;
+
+extern const usb_descriptor_list_t usb_descriptor_list[];
+#endif // NUM_ENDPOINTS
+
+#endif // F_CPU >= 20 MHz
+
+#endif
notaz.gp2x.de / megadrive.git / blobdiff