\r
// This file is part of the Cyclone 68000 Emulator\r
\r
-// Copyright (c) 2011 FinalDave (emudave (at) gmail.com)\r
+// Copyright (c) 2004,2011 FinalDave (emudave (at) gmail.com)\r
+// Copyright (c) 2005-2011 GraÅžvydas "notaz" Ignotas (notasas (at) gmail.com)\r
\r
// This code is licensed under the GNU General Public License version 2.0 and the MAME License.\r
// You can choose the license that has the most advantages for you.\r
\r
// SVN repository can be found at http://code.google.com/p/cyclone68000/\r
\r
+\r
#include "app.h"\r
\r
+// Pack our flags into r1, in SR/CCR register format\r
+// trashes r0,r2\r
+void OpFlagsToReg(int high)\r
+{\r
+ ot(" ldr r0,[r7,#0x4c] ;@ X bit\n");\r
+ ot(" mov r1,r10,lsr #28 ;@ ____NZCV\n");\r
+ ot(" eor r2,r1,r1,ror #1 ;@ Bit 0=C^V\n");\r
+ ot(" tst r2,#1 ;@ 1 if C!=V\n");\r
+ ot(" eorne r1,r1,#3 ;@ ____NZVC\n");\r
+ ot("\n");\r
+ if (high) ot(" ldrb r2,[r7,#0x44] ;@ Include SR high\n");\r
+ ot(" and r0,r0,#0x20000000\n");\r
+ ot(" orr r1,r1,r0,lsr #25 ;@ ___XNZVC\n");\r
+ if (high) ot(" orr r1,r1,r2,lsl #8\n");\r
+ ot("\n");\r
+}\r
+\r
+// Convert SR/CRR register in r0 to our flags\r
+// trashes r0,r1\r
+void OpRegToFlags(int high, int srh_reg)\r
+{\r
+ ot(" eor r1,r0,r0,ror #1 ;@ Bit 0=C^V\n");\r
+ ot(" mov r2,r0,lsl #25\n");\r
+ ot(" tst r1,#1 ;@ 1 if C!=V\n");\r
+ ot(" eorne r0,r0,#3 ;@ ___XNZCV\n");\r
+ ot(" str r2,[r7,#0x4c] ;@ Store X bit\n");\r
+ ot(" mov r10,r0,lsl #28 ;@ r10=NZCV...\n");\r
+\r
+ if (high)\r
+ {\r
+ int mask=EMULATE_TRACE?0xa7:0x27;\r
+ ot(" mov r%i,r0,ror #8\n",srh_reg);\r
+ ot(" and r%i,r%i,#0x%02x ;@ only take defined bits\n",srh_reg,srh_reg,mask);\r
+ ot(" strb r%i,[r7,#0x44] ;@ Store SR high\n",srh_reg);\r
+ }\r
+ ot("\n");\r
+}\r
+\r
+void SuperEnd(void)\r
+{\r
+ ot(";@ ----------\n");\r
+ ot(";@ tried execute privileged instruction in user mode\n");\r
+ ot("WrongPrivilegeMode%s\n",ms?"":":");\r
+#if EMULATE_ADDRESS_ERRORS_JUMP || EMULATE_ADDRESS_ERRORS_IO\r
+ ot(" ldr r1,[r7,#0x58]\n");\r
+ ot(" sub r4,r4,#2 ;@ last opcode wasn't executed - go back\n");\r
+ ot(" orr r1,r1,#4 ;@ set activity bit: 'not processing instruction'\n");\r
+ ot(" str r1,[r7,#0x58]\n");\r
+#else\r
+ ot(" sub r4,r4,#2 ;@ last opcode wasn't executed - go back\n");\r
+#endif\r
+ ot(" mov r0,#8 ;@ privilege violation\n");\r
+ ot(" bl Exception\n");\r
+ Cycles=34;\r
+ OpEnd(0);\r
+}\r
+\r
+// does OSP and A7 swapping if needed\r
+// new or old SR (not the one already in [r7,#0x44]) should be passed in r11\r
+// uses srh from srh_reg (loads if < 0), trashes r0,r11\r
+void SuperChange(int op,int srh_reg)\r
+{\r
+ ot(";@ A7 <-> OSP?\n");\r
+ if (srh_reg < 0) {\r
+ ot(" ldr r0,[r7,#0x44] ;@ Get other SR high\n");\r
+ srh_reg=0;\r
+ }\r
+ ot(" eor r0,r%i,r11\n",srh_reg);\r
+ ot(" tst r0,#0x20\n");\r
+ ot(" beq no_sp_swap%.4x\n",op);\r
+ ot(" ;@ swap OSP and A7:\n");\r
+ ot(" ldr r11,[r7,#0x3C] ;@ Get A7\n");\r
+ ot(" ldr r0, [r7,#0x48] ;@ Get OSP\n");\r
+ ot(" str r11,[r7,#0x48]\n");\r
+ ot(" str r0, [r7,#0x3C]\n");\r
+ ot("no_sp_swap%.4x%s\n", op, ms?"":":");\r
+}\r
+\r
+\r
+\r
// --------------------- Opcodes 0x1000+ ---------------------\r
// Emit a Move opcode, 00xxdddd ddssssss\r
int OpMove(int op)\r
case 0x2000: size=2; break;\r
}\r
\r
- if (movea && size<1) return 1; // movea.b is invalid\r
+ if (size<1 && (movea || EaAn(sea))) return 1; // move.b An,* and movea.b * are invalid\r
\r
// See if we can do this opcode:\r
if (EaCanRead (sea,size)==0) return 1;\r
if (EaCanWrite(tea )==0) return 1;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,size);\r
if (tea<0x38) use&=~0x0e00; // Use same handler for register ?0-7\r
\r
- if (tea>=0x18 && tea<0x28 && (tea&7)==7) use|=0x0e00; // Specific handler for (a7)+ and -(a7)\r
+ if (tea==0x1f || tea==0x27) use|=0x0e00; // Specific handler for (a7)+ and -(a7)\r
\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op); Cycles=4;\r
+ OpStart(op,sea,tea); Cycles=4;\r
\r
- EaCalc(0,0x003f,sea,size);\r
- EaRead(0, 0,sea,size);\r
-\r
- ot(" adds r1,r0,#0 ;@ Defines NZ, clears CV\n");\r
+ if (movea==0)\r
+ {\r
+ EaCalcRead(-1,0,sea,size,0x003f);\r
+ ot(" adds r1,r0,#0 ;@ Defines NZ, clears CV\n");\r
+ ot(" mrs r10,cpsr ;@ r10=NZCV flags\n");\r
+ ot("\n");\r
+ }\r
+ else\r
+ {\r
+ EaCalcRead(-1,1,sea,size,0x003f);\r
+ size=2; // movea always expands to 32-bits\r
+ }\r
\r
- if (movea==0) ot(" mrs r9,cpsr ;@ r9=NZCV flags\n");\r
- ot("\n");\r
+ eawrite_check_addrerr=1;\r
+#if SPLIT_MOVEL_PD\r
+ if ((tea&0x38)==0x20 && size==2) { // -(An)\r
+ EaCalc (8,0x0e00,tea,size,0,0);\r
+ ot(" mov r11,r1\n");\r
+ ot(" add r0,r8,#2\n");\r
+ EaWrite(0, 1,tea,1,0x0e00,0,0);\r
+ EaWrite(8, 11,tea,1,0x0e00,1);\r
+ }\r
+ else\r
+#endif\r
+ {\r
+ EaCalc (0,0x0e00,tea,size,0,0);\r
+ EaWrite(0, 1,tea,size,0x0e00,0,0);\r
+ }\r
\r
- if (movea) size=2; // movea always expands to 32-bits\r
+#if CYCLONE_FOR_GENESIS && !MEMHANDLERS_CHANGE_CYCLES\r
+ // this is a bit hacky (device handlers might modify cycles)\r
+ if (tea==0x39||((0x10<=tea&&tea<0x30)&&size>=1))\r
+ ot(" ldr r5,[r7,#0x5c] ;@ Load Cycles\n");\r
+#endif\r
\r
- EaCalc (0,0x0e00,tea,size);\r
- EaWrite(0, 1,tea,size);\r
+ if((tea&0x38)==0x20) Cycles-=2; // less cycles when dest is -(An)\r
\r
- OpEnd();\r
+ OpEnd(sea,tea);\r
return 0;\r
}\r
\r
sea= op&0x003f;\r
tea=(op&0x0e00)>>9; tea|=8;\r
\r
- if (EaCanRead(sea,-1)==0) return 1; // See if we can do this opcode:\r
+ if (EaCanRead(sea,-1)==0) return 1; // See if we can do this opcode\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,0);\r
use&=~0x0e00; // Also use 1 handler for target ?0-7\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op); Cycles=4;\r
+ OpStart(op,sea,tea);\r
\r
+ eawrite_check_addrerr=1;\r
EaCalc (1,0x003f,sea,0); // Lea\r
EaCalc (0,0x0e00,tea,2);\r
- EaWrite(0, 1,tea,2);\r
+ EaWrite(0, 1,tea,2,0x0e00);\r
\r
- if (Amatch)\r
- {\r
- // Correct?\r
- if (sea< 0x18) Cycles+=4;\r
- else if (sea==0x30) Cycles+=12;\r
- else Cycles+=8;\r
- }\r
+ Cycles=Ea_add_ns(g_lea_cycle_table,sea);\r
\r
- OpEnd();\r
+ OpEnd(sea,tea);\r
\r
return 0;\r
}\r
\r
// --------------------- Opcodes 0x40c0+ ---------------------\r
-\r
-// Pack our flags into r1, in SR/CCR register format\r
-// trashes r0,r2\r
-void OpFlagsToReg(int high)\r
-{\r
- ot(" mov r1,r9,lsr #28 ;@ ____NZCV\n");\r
- ot(" eor r0,r1,r1,ror #1 ;@ Bit 0=C^V\n");\r
- ot(" tst r0,#1 ;@ 1 if C!=V\n");\r
- ot(" eorne r1,r1,#3 ;@ ____NZVC\n");\r
- ot("\n");\r
- ot(" ldrb r0,[r7,#0x45] ;@ X bit\n");\r
- if (high) ot(" ldrb r2,[r7,#0x44] ;@ Include SR high\n");\r
- ot(" and r0,r0,#0x02\n");\r
- if (high) ot(" orr r1,r1,r2,lsl #8\n");\r
- ot(" orr r1,r1,r0,lsl #3 ;@ ___XNZVC\n");\r
- ot("\n");\r
-}\r
-\r
-// Convert SR/CRR register in r0 to our flags\r
-// trashes r0,r1\r
-void OpRegToFlags(int high)\r
-{\r
- ot(" eor r1,r0,r0,ror #1 ;@ Bit 0=C^V\n");\r
- ot(" mov r2,r0,lsr #3 ;@ r2=___XN\n");\r
- ot(" tst r1,#1 ;@ 1 if C!=V\n");\r
- ot(" eorne r0,r0,#3 ;@ ___XNZCV\n");\r
- ot(" strb r2,[r7,#0x45] ;@ Store X bit\n");\r
- ot(" mov r9,r0,lsl #28 ;@ r9=NZCV...\n");\r
-\r
- if (high)\r
- {\r
- ot(" mov r0,r0,ror #8\n");\r
- ot(" strb r0,[r7,#0x44] ;@ Store SR high\n");\r
- }\r
- ot("\n");\r
-}\r
-\r
-static void SuperCheck(int op)\r
-{\r
- ot(" ldrb r0,[r7,#0x44] ;@ Get SR high\n");\r
- ot(" tst r0,#0x20 ;@ Check we are in supervisor mode\n");\r
- ot(" beq WrongMode%.4x ;@ No\n",op);\r
- ot("\n");\r
-}\r
-\r
-static void SuperEnd(int op)\r
-{\r
- ot("WrongMode%.4x%s\n",op,ms?"":":");\r
- ot(";@ todo - cause an exception\n");\r
- OpEnd();\r
-}\r
-\r
-// Move SR opcode, 01000tt0 11aaaaaa move to SR\r
+// Move SR opcode, 01000tt0 11aaaaaa move SR\r
int OpMoveSr(int op)\r
{\r
int type=0,ea=0;\r
int use=0,size=1;\r
\r
- type=(op>>9)&3;\r
+ type=(op>>9)&3; // from SR, from CCR, to CCR, to SR\r
ea=op&0x3f;\r
\r
+ if(EaAn(ea)) return 1; // can't use An regs\r
+\r
switch(type)\r
{\r
- case 0: case 1:\r
+ case 0:\r
if (EaCanWrite(ea)==0) return 1; // See if we can do this opcode:\r
- break;\r
+ break;\r
\r
- default: return 1; // todo\r
+ case 1:\r
+ return 1; // no such op in 68000\r
\r
case 2: case 3:\r
if (EaCanRead(ea,size)==0) return 1; // See if we can do this opcode:\r
- break;\r
+ break;\r
}\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,size);\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op);\r
- if (type==0) Cycles=8;\r
- else if (type==1) Cycles=6;\r
- else Cycles=12;\r
-\r
- if (Amatch && ea==0x3c) Cycles-=4; // Correct?\r
-\r
- if (type==0 || type==3) SuperCheck(op);\r
+ // 68000 model allows reading whole SR in user mode (but newer models don't)\r
+ OpStart(op,ea,0,0,type==3);\r
+ Cycles=12;\r
+ if (type==0) Cycles=(ea>=8)?8:6;\r
\r
if (type==0 || type==1)\r
{\r
+ eawrite_check_addrerr=1;\r
OpFlagsToReg(type==0);\r
- EaCalc (0,0x003f,ea,size);\r
- EaWrite(0, 1,ea,size);\r
+ EaCalc (0,0x003f,ea,size,0,0);\r
+ EaWrite(0, 1,ea,size,0x003f,0,0);\r
}\r
\r
if (type==2 || type==3)\r
{\r
- EaCalc(0,0x003f,ea,size);\r
- EaRead(0, 0,ea,size);\r
- OpRegToFlags(type==3);\r
- if (type==3) CheckInterrupt();\r
+ EaCalcReadNoSE(-1,0,ea,size,0x003f);\r
+ OpRegToFlags(type==3,1);\r
+ if (type==3) {\r
+ SuperChange(op,1);\r
+ opend_check_interrupt = 1;\r
+ opend_check_trace = 1;\r
+ OpEnd(ea);\r
+ return 0;\r
+ }\r
}\r
\r
- OpEnd();\r
-\r
- if (type==0 || type==3) SuperEnd(op);\r
+ OpEnd(ea);\r
\r
return 0;\r
}\r
{\r
int type=0,ea=0;\r
int use=0,size=0;\r
+ int sr_mask=EMULATE_TRACE?0xa7:0x27;\r
\r
type=(op>>9)&5; if (type==4) return 1;\r
- size=(op>>6)&1;\r
+ size=(op>>6)&1; // ccr or sr?\r
ea=0x3c;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,size);\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op); Cycles=16;\r
+ OpStart(op,ea,0,0,size!=0); Cycles=16;\r
+\r
+ EaCalcRead(-1,0,ea,size,0x003f);\r
\r
- SuperCheck(op);\r
+ ot(" eor r1,r0,r0,ror #1 ;@ Bit 0=C^V\n");\r
+ ot(" tst r1,#1 ;@ 1 if C!=V\n");\r
+ ot(" eorne r0,r0,#3 ;@ ___XNZCV\n");\r
+ ot(" ldr r2,[r7,#0x4c] ;@ Load old X bit\n");\r
+\r
+ // note: old srh is already in r11 (done by OpStart)\r
+ if (type==0) {\r
+ ot(" orr r10,r10,r0,lsl #28\n");\r
+ ot(" orr r2,r2,r0,lsl #25 ;@ X bit\n");\r
+ if (size!=0) {\r
+ ot(" orr r1,r11,r0,lsr #8\n");\r
+ ot(" and r1,r1,#0x%02x ;@ mask-out unused bits\n",sr_mask);\r
+ }\r
+ }\r
+ if (type==1) {\r
+ ot(" and r10,r10,r0,lsl #28\n");\r
+ ot(" and r2,r2,r0,lsl #25 ;@ X bit\n");\r
+ if (size!=0)\r
+ ot(" and r1,r11,r0,lsr #8\n");\r
+ }\r
+ if (type==5) {\r
+ ot(" eor r10,r10,r0,lsl #28\n");\r
+ ot(" eor r2,r2,r0,lsl #25 ;@ X bit\n");\r
+ if (size!=0) {\r
+ ot(" eor r1,r11,r0,lsr #8\n");\r
+ ot(" and r1,r1,#0x%02x ;@ mask-out unused bits\n",sr_mask);\r
+ }\r
+ }\r
\r
- EaCalc(0,0x003f,ea,size);\r
- EaRead(0, 10,ea,size);\r
+ ot(" str r2,[r7,#0x4c] ;@ Save X bit\n");\r
+ if (size!=0)\r
+ ot(" strb r1,[r7,#0x44]\n");\r
+ ot("\n");\r
\r
- OpFlagsToReg(size);\r
- if (type==0) ot(" orr r0,r1,r10\n");\r
- if (type==1) ot(" and r0,r1,r10\n");\r
- if (type==5) ot(" eor r0,r1,r10\n");\r
- OpRegToFlags(size);\r
- if (size) CheckInterrupt();\r
+ // we can't enter supervisor mode, nor unmask irqs just by using OR\r
+ if (size!=0 && type!=0) {\r
+ SuperChange(op,1);\r
+ ot("\n");\r
+ opend_check_interrupt = 1;\r
+ }\r
+ // also can't set trace bit with AND\r
+ if (size!=0 && type!=1)\r
+ opend_check_trace = 1;\r
\r
- OpEnd();\r
- SuperEnd(op);\r
+ OpEnd(ea);\r
\r
return 0;\r
}\r
ea=op&0x003f; if (ea<0x10) return 1; // Swap opcode\r
if (EaCanRead(ea,-1)==0) return 1; // See if we can do this opcode:\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,0);\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op); Cycles=20;\r
+ OpStart(op,ea);\r
\r
+ ot(" ldr r11,[r7,#0x3c]\n");\r
EaCalc (1,0x003f, ea,0);\r
ot("\n");\r
- ot(" ldr r0,[r7,#0x3c]\n");\r
- ot(" sub r0,r0,#4 ;@ Predecrement A7\n");\r
+ ot(" sub r0,r11,#4 ;@ Predecrement A7\n");\r
ot(" str r0,[r7,#0x3c] ;@ Save A7\n");\r
ot("\n");\r
MemHandler(1,2); // Write 32-bit\r
ot("\n");\r
\r
- OpEnd();\r
+ Cycles=6+Ea_add_ns(g_pea_cycle_table,ea);\r
+\r
+ OpEnd(ea);\r
\r
return 0;\r
}\r
int size=0,ea=0,cea=0,dir=0;\r
int use=0,decr=0,change=0;\r
\r
- size=((op>>6)&1)+1;\r
+ size=((op>>6)&1)+1; // word, long\r
ea=op&0x003f;\r
- dir=(op>>10)&1; // Direction\r
+ dir=(op>>10)&1; // Direction (1==ea2reg)\r
+\r
+ if (dir) {\r
+ if (ea<0x10 || ea>0x3b || (ea&0x38)==0x20) return 1; // Invalid EA\r
+ } else {\r
+ if (ea<0x10 || ea>0x39 || (ea&0x38)==0x18) return 1;\r
+ }\r
\r
- if (ea<0x10 || ea>0x39) return 1; // Invalid EA\r
if ((ea&0x38)==0x18 || (ea&0x38)==0x20) change=1;\r
if ((ea&0x38)==0x20) decr=1; // -(An), bitfield is decr\r
\r
- // See if we can do this opcode:\r
- if (EaCanWrite(ea)==0) return 1;\r
-\r
cea=ea; if (change) cea=0x10;\r
\r
- use=OpBase(op);\r
+ use=OpBase(op,size);\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op);\r
+ OpStart(op,ea,0,1);\r
\r
- ot(" stmdb sp!,{r9} ;@ Push r9\n");\r
ot(" ldrh r11,[r4],#2 ;@ r11=register mask\n");\r
-\r
ot("\n");\r
- ot(";@ Get the address into r9:\n");\r
- EaCalc(9,0x003f,cea,size);\r
+ ot(";@ Get the address into r6:\n");\r
+ EaCalc(6,0x003f,cea,size);\r
\r
- ot(";@ r10=Register Index*4:\n");\r
- if (decr) ot(" mov r10,#0x3c ;@ order reversed for -(An)\n");\r
- else ot(" mov r10,#0\n");\r
+#if !MEMHANDLERS_NEED_PREV_PC\r
+ // must save PC, need a spare register\r
+ ot(" str r4,[r7,#0x40] ;@ Save PC\n");\r
+#endif\r
+\r
+ ot(";@ r4=Register Index*4:\n");\r
+ if (decr) ot(" mov r4,#0x40 ;@ order reversed for -(An)\n");\r
+ else ot(" mov r4,#-4\n");\r
\r
ot("\n");\r
- ot("MoreReg%.4x%s\n",op, ms?"":":");\r
+ ot(" tst r11,r11\n"); // sanity check\r
+ ot(" beq NoRegs%.4x\n",op);\r
\r
- ot(" tst r11,#1\n");\r
- ot(" beq SkipReg%.4x\n",op);\r
+#if EMULATE_ADDRESS_ERRORS_IO\r
ot("\n");\r
+ ot(" tst r6,#1 ;@ address error?\n");\r
+ ot(" movne r0,r6\n");\r
+ ot(" bne ExceptionAddressError_%c_data\n",dir?'r':'w');\r
+#endif\r
\r
- if (decr) ot(" sub r9,r9,#%d ;@ Pre-decrement address\n",1<<size);\r
+ ot("\n");\r
+ ot("Movemloop%.4x%s\n",op, ms?"":":");\r
+ ot(" add r4,r4,#%d ;@ r4=Next Register\n",decr?-4:4);\r
+ ot(" movs r11,r11,lsr #1\n");\r
+ ot(" bcc Movemloop%.4x\n",op);\r
+ ot("\n");\r
+\r
+ if (decr) ot(" sub r6,r6,#%d ;@ Pre-decrement address\n",1<<size);\r
\r
if (dir)\r
{\r
ot(" ;@ Copy memory to register:\n",1<<size);\r
- EaRead (9,0,ea,size);\r
- ot(" str r0,[r7,r10] ;@ Save value into Dn/An\n");\r
+ earead_check_addrerr=0; // already checked\r
+ EaRead (6,0,ea,size,0x003f);\r
+ ot(" str r0,[r7,r4] ;@ Save value into Dn/An\n");\r
}\r
else\r
{\r
ot(" ;@ Copy register to memory:\n",1<<size);\r
- ot(" ldr r1,[r7,r10] ;@ Load value from Dn/An\n");\r
- EaWrite(9,1,ea,size);\r
+ ot(" ldr r1,[r7,r4] ;@ Load value from Dn/An\n");\r
+#if SPLIT_MOVEL_PD\r
+ if (decr && size==2) { // -(An)\r
+ ot(" add r0,r6,#2\n");\r
+ EaWrite(0,1,ea,1,0x003f,0,0);\r
+ ot(" ldr r1,[r7,r4] ;@ Load value from Dn/An\n");\r
+ ot(" mov r0,r6\n");\r
+ EaWrite(0,1,ea,1,0x003f,1);\r
+ }\r
+ else\r
+#endif\r
+ {\r
+ EaWrite(6,1,ea,size,0x003f);\r
+ }\r
}\r
\r
- if (decr==0) ot(" add r9,r9,#%d ;@ Post-increment address\n",1<<size);\r
+ if (decr==0) ot(" add r6,r6,#%d ;@ Post-increment address\n",1<<size);\r
\r
ot(" sub r5,r5,#%d ;@ Take some cycles\n",2<<size);\r
- ot("\n");\r
- ot("SkipReg%.4x%s\n",op, ms?"":":");\r
- ot(" movs r11,r11,lsr #1;@ Shift mask:\n");\r
- ot(" add r10,r10,#%d ;@ r10=Next Register\n",decr?-4:4);\r
- ot(" bne MoreReg%.4x\n",op);\r
+ ot(" tst r11,r11\n");\r
+ ot(" bne Movemloop%.4x\n",op);\r
ot("\n");\r
\r
if (change)\r
{\r
ot(";@ Write back address:\n");\r
EaCalc (0,0x0007,8|(ea&7),2);\r
- EaWrite(0, 9,8|(ea&7),2);\r
+ EaWrite(0, 6,8|(ea&7),2,0x0007);\r
}\r
\r
- ot(" ldmia sp!,{r9} ;@ Pop r9\n");\r
+ ot("NoRegs%.4x%s\n",op, ms?"":":");\r
+ ot(" ldr r4,[r7,#0x40]\n");\r
+ ot(" ldr r6,[r7,#0x54] ;@ restore Opcode Jump table\n");\r
ot("\n");\r
\r
- if (ea<0x10) { }\r
- else if (ea<0x18) Cycles=16; // (a0)\r
- else if (ea<0x20) Cycles= 0; // (a0)+ ?\r
- else if (ea<0x28) Cycles= 8; //-(a0)\r
- else if (ea<0x30) Cycles=24; // ($3333,a0)\r
- else if (ea<0x38) Cycles=28; // ($33,a0,d3.w*2)\r
- else if (ea<0x39) Cycles=24; // $3333.w\r
- else if (ea<0x3a) Cycles=28; // $33333333.l\r
+ if(dir) { // er\r
+ if (ea==0x3a) Cycles=16; // ($nn,PC)\r
+ else if (ea==0x3b) Cycles=18; // ($nn,pc,Rn)\r
+ else Cycles=12;\r
+ } else {\r
+ Cycles=8;\r
+ }\r
\r
- OpEnd();\r
+ Cycles+=Ea_add_ns(g_movem_cycle_table,ea);\r
+\r
+ opend_op_changes_cycles = 1;\r
+ OpEnd(ea);\r
+ ot("\n");\r
\r
return 0;\r
}\r
\r
if (op!=use) { OpUse(op,use); return 0; } // Use existing handler\r
\r
- OpStart(op); Cycles=4;\r
-\r
- ot(" ldrb r0,[r7,#0x44] ;@ Get SR\n");\r
- ot(" tst r0,#0x20 ;@ Check we are in supervisor mode\n");\r
- ot(" beq WrongMode%.4x ;@ No\n",op);\r
- ot("\n");\r
+ OpStart(op,0,0,0,1); Cycles=4;\r
\r
if (dir)\r
{\r
- EaCalc (0,0x0007,8,2);\r
+ eawrite_check_addrerr=1;\r
ot(" ldr r1,[r7,#0x48] ;@ Get from USP\n\n");\r
- EaWrite(0, 1,8,2);\r
+ EaCalc (0,0x000f,8,2,1);\r
+ EaWrite(0, 1,8,2,0x000f,1);\r
}\r
else\r
{\r
- EaCalc (0,0x0007,8,2);\r
- EaRead (0, 0,8,2);\r
+ EaCalc (0,0x000f,8,2,1);\r
+ EaRead (0, 0,8,2,0x000f,1);\r
ot(" str r0,[r7,#0x48] ;@ Put in USP\n\n");\r
}\r
\r
OpEnd();\r
\r
- ot("WrongMode%.4x%s\n",op,ms?"":":");\r
- ot(";@ todo - cause an exception\n");\r
- OpEnd();\r
-\r
return 0;\r
}\r
\r
ot(" movs r0,r8,asl #24\n");\r
ot(" and r1,r8,#0x0e00\n");\r
ot(" mov r0,r0,asr #24 ;@ Sign extended Quick value\n");\r
- ot(" mrs r9,cpsr ;@ r9=NZ flags\n");\r
+ ot(" mrs r10,cpsr ;@ r10=NZ flags\n");\r
ot(" str r0,[r7,r1,lsr #7] ;@ Store into Dn\n");\r
ot("\n");\r
\r
\r
OpStart(op); Cycles=6;\r
\r
- ot(" and r10,r8,#0x0e00 ;@ Find T register\n");\r
- ot(" and r11,r8,#0x000f ;@ Find S register\n");\r
- if (type==0x48) ot(" orr r10,r10,#0x1000 ;@ T is an address register\n");\r
+ ot(" and r2,r8,#0x0e00 ;@ Find T register\n");\r
+ ot(" and r3,r8,#0x000f ;@ Find S register\n");\r
+ if (type==0x48) ot(" orr r2,r2,#0x1000 ;@ T is an address register\n");\r
ot("\n");\r
- ot(" ldr r0,[r7,r10,lsr #7] ;@ Get T\n");\r
- ot(" ldr r1,[r7,r11,lsl #2] ;@ Get S\n");\r
+ ot(" ldr r0,[r7,r2,lsr #7] ;@ Get T\n");\r
+ ot(" ldr r1,[r7,r3,lsl #2] ;@ Get S\n");\r
ot("\n");\r
- ot(" str r0,[r7,r11,lsl #2] ;@ T->S\n");\r
- ot(" str r1,[r7,r10,lsr #7] ;@ S->T\n"); \r
+ ot(" str r0,[r7,r3,lsl #2] ;@ T->S\n");\r
+ ot(" str r1,[r7,r2,lsr #7] ;@ S->T\n"); \r
ot("\n");\r
\r
OpEnd();\r
\r
return 0;\r
}\r
+\r
+// ------------------------- movep -------------------------------\r
+// 0000ddd1 0z001sss\r
+// 0000sss1 1z001ddd (to mem)\r
+int OpMovep(int op)\r
+{\r
+ int ea=0,rea=0;\r
+ int size=1,use=0,dir,aadd=0;\r
+\r
+ use=op&0xf1f8;\r
+ if (op!=use) { OpUse(op,use); return 0; } // Use existing handler (for all dests, srcs)\r
+\r
+ // Get EA\r
+ ea = (op&0x0007)|0x28;\r
+ rea= (op&0x0e00)>>9;\r
+ dir = (op>>7)&1;\r
+\r
+ // Find size extension\r
+ if(op&0x0040) size=2;\r
+\r
+ OpStart(op,ea);\r
+ \r
+ if(dir) // reg to mem\r
+ {\r
+ EaCalcReadNoSE(-1,11,rea,size,0x0e00);\r
+\r
+ EaCalc(8,0x000f,ea,size);\r
+ if(size==2) { // if operand is long\r
+ ot(" mov r1,r11,lsr #24 ;@ first byte\n");\r
+ EaWrite(8,1,ea,0,0x000f); // store first byte\r
+ ot(" add r0,r8,#%i\n",(aadd+=2));\r
+ ot(" mov r1,r11,lsr #16 ;@ second byte\n");\r
+ EaWrite(0,1,ea,0,0x000f); // store second byte\r
+ ot(" add r0,r8,#%i\n",(aadd+=2));\r
+ } else {\r
+ ot(" mov r0,r8\n");\r
+ }\r
+ ot(" mov r1,r11,lsr #8 ;@ first or third byte\n");\r
+ EaWrite(0,1,ea,0,0x000f);\r
+ ot(" add r0,r8,#%i\n",(aadd+=2));\r
+ ot(" and r1,r11,#0xff\n");\r
+ EaWrite(0,1,ea,0,0x000f);\r
+ }\r
+ else // mem to reg\r
+ {\r
+ EaCalc(6,0x000f,ea,size,1);\r
+ EaRead(6,11,ea,0,0x000f,1); // read first byte\r
+ ot(" add r0,r6,#2\n");\r
+ EaRead(0,1,ea,0,0x000f,1); // read second byte\r
+ if(size==2) { // if operand is long\r
+ ot(" orr r11,r11,r1,lsr #8 ;@ second byte\n");\r
+ ot(" add r0,r6,#4\n");\r
+ EaRead(0,1,ea,0,0x000f,1);\r
+ ot(" orr r11,r11,r1,lsr #16 ;@ third byte\n");\r
+ ot(" add r0,r6,#6\n");\r
+ EaRead(0,1,ea,0,0x000f,1);\r
+ ot(" orr r1,r11,r1,lsr #24 ;@ fourth byte\n");\r
+ } else {\r
+ ot(" orr r1,r11,r1,lsr #8 ;@ second byte\n");\r
+ }\r
+ // store the result\r
+ EaCalc(0,0x0e00,rea,size,1);\r
+ EaWrite(0,1,rea,size,0x0e00,1);\r
+ ot(" ldr r6,[r7,#0x54]\n");\r
+ }\r
+\r
+ Cycles=(size==2)?24:16;\r
+ OpEnd(ea);\r
+\r
+ return 0;\r
+}\r
+\r
+// Emit a Stop/Reset opcodes, 01001110 011100t0 imm\r
+int OpStopReset(int op)\r
+{\r
+ int type=(op>>1)&1; // stop/reset\r
+\r
+ OpStart(op,0,0,0,1);\r
+\r
+ if(type) {\r
+ // copy immediate to SR, stop the CPU and eat all remaining cycles.\r
+ ot(" ldrh r0,[r4],#2 ;@ Fetch the immediate\n");\r
+ OpRegToFlags(1);\r
+ SuperChange(op,0);\r
+\r
+ ot("\n");\r
+\r
+ ot(" ldr r0,[r7,#0x58]\n");\r
+ ot(" mov r5,#0 ;@ eat cycles\n");\r
+ ot(" orr r0,r0,#1 ;@ stopped\n");\r
+ ot(" str r0,[r7,#0x58]\n");\r
+ ot("\n");\r
+\r
+ Cycles = 4;\r
+ ot("\n");\r
+ }\r
+ else\r
+ {\r
+ Cycles = 132;\r
+#if USE_RESET_CALLBACK\r
+ ot(" str r4,[r7,#0x40] ;@ Save PC\n");\r
+ ot(" mov r1,r10,lsr #28\n");\r
+ ot(" strb r1,[r7,#0x46] ;@ Save Flags (NZCV)\n");\r
+ ot(" str r5,[r7,#0x5c] ;@ Save Cycles\n");\r
+ ot(" ldr r11,[r7,#0x90] ;@ ResetCallback\n");\r
+ ot(" tst r11,r11\n");\r
+ ot(" movne lr,pc\n");\r
+ ot(" bxne r11 ;@ call ResetCallback if it is defined\n");\r
+ ot(" ldrb r10,[r7,#0x46] ;@ r10 = Load Flags (NZCV)\n");\r
+ ot(" ldr r5,[r7,#0x5c] ;@ Load Cycles\n");\r
+ ot(" ldr r4,[r7,#0x40] ;@ Load PC\n");\r
+ ot(" mov r10,r10,lsl #28\n");\r
+ ot("\n");\r
+#endif\r
+ }\r
+\r
+ OpEnd();\r
+\r
+ return 0;\r
+}\r
+\r
notaz.gp2x.de / cyclone68000.git / blobdiff