disable slew rate

[megadrive.git] / teensy3 / pins_teensy.c

diff --git a/teensy3/pins_teensy.c b/teensy3/pins_teensy.c
index e2d3c1d..1c81ee9 100644 (file)
--- a/teensy3/pins_teensy.c
+++ b/teensy3/pins_teensy.c
@@ -30,7 +30,7 @@
 
 #include "core_pins.h"
 #include "pins_arduino.h"
-#include "HardwareSerial.h"
+//#include "HardwareSerial.h"
 
 #if 0
 // moved to pins_arduino.h
@@ -116,6 +116,11 @@ void init_pin_interrupts(void)
        // fast interrupts will still be serviced quickly?
 }
 
+void attachInterruptVector(enum IRQ_NUMBER_t irq, void (*function)(void))
+{
+       _VectorsRam[irq + 16] = function;
+}
+
 void attachInterrupt(uint8_t pin, void (*function)(void), int mode)
 {
        volatile uint32_t *config;
@@ -320,12 +325,37 @@ extern void usb_init(void);
 
 
 // create a default PWM at the same 488.28 Hz as Arduino Uno
-#if F_BUS == 48000000
+
+#if F_BUS == 60000000
+#define DEFAULT_FTM_MOD (61440 - 1)
+#define DEFAULT_FTM_PRESCALE 1
+#elif F_BUS == 56000000
+#define DEFAULT_FTM_MOD (57344 - 1)
+#define DEFAULT_FTM_PRESCALE 1
+#elif F_BUS == 48000000
 #define DEFAULT_FTM_MOD (49152 - 1)
 #define DEFAULT_FTM_PRESCALE 1
-#else
+#elif F_BUS == 40000000
+#define DEFAULT_FTM_MOD (40960 - 1)
+#define DEFAULT_FTM_PRESCALE 1
+#elif F_BUS == 36000000
+#define DEFAULT_FTM_MOD (36864 - 1)
+#define DEFAULT_FTM_PRESCALE 1
+#elif F_BUS == 24000000
 #define DEFAULT_FTM_MOD (49152 - 1)
 #define DEFAULT_FTM_PRESCALE 0
+#elif F_BUS == 16000000
+#define DEFAULT_FTM_MOD (32768 - 1)
+#define DEFAULT_FTM_PRESCALE 0
+#elif F_BUS == 8000000
+#define DEFAULT_FTM_MOD (16384 - 1)
+#define DEFAULT_FTM_PRESCALE 0
+#elif F_BUS == 4000000
+#define DEFAULT_FTM_MOD (8192 - 1)
+#define DEFAULT_FTM_PRESCALE 0
+#elif F_BUS == 2000000
+#define DEFAULT_FTM_MOD (4096 - 1)
+#define DEFAULT_FTM_PRESCALE 0
 #endif
 
 //void init_pins(void)
@@ -359,13 +389,13 @@ void _init_Teensyduino_internal_(void)
        FTM2_SC = FTM_SC_CLKS(1) | FTM_SC_PS(DEFAULT_FTM_PRESCALE);
 #endif
 
-       analog_init();
+       //analog_init();
        //delay(100); // TODO: this is not necessary, right?
        delay(4);
        usb_init();
 }
 
-
+#if 0
 
 static uint8_t analog_write_res = 8;
 
@@ -525,9 +555,17 @@ void analogWriteFrequency(uint8_t pin, uint32_t frequency)
                FTM0_MOD = mod;
                FTM0_SC = FTM_SC_CLKS(1) | FTM_SC_PS(prescale);
        }
+#if defined(__MK20DX256__)
+         else if (pin == 25 || pin == 32) {
+               FTM2_SC = 0;
+               FTM2_CNT = 0;
+               FTM2_MOD = mod;
+               FTM2_SC = FTM_SC_CLKS(1) | FTM_SC_PS(prescale);
+       }
+#endif
 }
 
-
+#endif
 
 
 // TODO: startup code needs to initialize all pins to GPIO mode, input by default
@@ -573,7 +611,7 @@ void pinMode(uint8_t pin, uint8_t mode)
 
        if (mode == OUTPUT) {
                *portModeRegister(pin) = 1;
-               *config = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1);
+               *config = /*PORT_PCR_SRE |*/ PORT_PCR_DSE | PORT_PCR_MUX(1);
        } else {
                *portModeRegister(pin) = 0;
                if (mode == INPUT) {
@@ -685,12 +723,29 @@ void delay(uint32_t ms)
        }
 }
 
-#if F_CPU == 96000000
+// TODO: verify these result in correct timeouts...
+#if F_CPU == 168000000
+#define PULSEIN_LOOPS_PER_USEC 25
+#elif F_CPU == 144000000
+#define PULSEIN_LOOPS_PER_USEC 21
+#elif F_CPU == 120000000
+#define PULSEIN_LOOPS_PER_USEC 18
+#elif F_CPU == 96000000
 #define PULSEIN_LOOPS_PER_USEC 14
+#elif F_CPU == 72000000
+#define PULSEIN_LOOPS_PER_USEC 10
 #elif F_CPU == 48000000
 #define PULSEIN_LOOPS_PER_USEC 7
 #elif F_CPU == 24000000
 #define PULSEIN_LOOPS_PER_USEC 4
+#elif F_CPU == 16000000
+#define PULSEIN_LOOPS_PER_USEC 1
+#elif F_CPU == 8000000
+#define PULSEIN_LOOPS_PER_USEC 1
+#elif F_CPU == 4000000
+#define PULSEIN_LOOPS_PER_USEC 1
+#elif F_CPU == 2000000
+#define PULSEIN_LOOPS_PER_USEC 1
 #endif