#include <stdio.h>
#include <stdlib.h>
#include <string.h>
-#include <math.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <unistd.h>
#include <sys/ioctl.h>
-#include <linux/fb.h>
#include <linux/soundcard.h>
#include "soc.h"
#include "plat_gp2x.h"
#include "../plat.h"
-volatile unsigned short *memregs;
-volatile unsigned int *memregl;
-int memdev = -1;
-int gp2x_dev_id;
-
static int battdev = -1, mixerdev = -1;
static int cpu_clock_allowed;
static unsigned int saved_video_regs[2][6];
+static unsigned int timer_drift; // count per real second
#ifndef ARRAY_SIZE
#define ARRAY_SIZE(x) (sizeof(x) / sizeof(x[0]))
#endif
-// TODO FIXME: merge
-#if 0
-extern void *gp2x_screens[4];
-
-#define fb_buf_count 4
-static unsigned int fb_paddr[fb_buf_count];
-static int fb_work_buf;
-static int fbdev = -1;
-
-static char cpuclk_was_changed = 0;
-static unsigned short memtimex_old[2];
-static unsigned int pllsetreg0_old;
-static unsigned int timer_drift; // count per real second
-static int last_pal_setting = 0;
-
-
-/* misc */
-static void pollux_set_fromenv(const char *env_var)
-{
- const char *set_string;
- set_string = getenv(env_var);
- if (set_string)
- pollux_set(memregs, set_string);
- else
- printf("env var %s not defined.\n", env_var);
-}
-
-/* video stuff */
-static void pollux_video_flip(int buf_count)
-{
- memregl[0x406C>>2] = fb_paddr[fb_work_buf];
- memregl[0x4058>>2] |= 0x10;
- fb_work_buf++;
- if (fb_work_buf >= buf_count)
- fb_work_buf = 0;
- g_screen_ptr = gp2x_screens[fb_work_buf];
-}
-
-static void gp2x_video_flip_(void)
-{
- pollux_video_flip(fb_buf_count);
-}
-
-/* doulblebuffered flip */
-static void gp2x_video_flip2_(void)
-{
- pollux_video_flip(2);
-}
-
-static void gp2x_video_changemode_ll_(int bpp)
+/* note: both PLLs are programmed the same way,
+ * the databook incorrectly states that PLL1 differs */
+static int decode_pll(unsigned int reg)
{
- static int prev_bpp = 0;
- int code = 0, bytes = 2;
- int rot_cmd[2] = { 0, 0 };
- unsigned int r;
- char buff[32];
- int ret;
-
- if (bpp == prev_bpp)
- return;
- prev_bpp = bpp;
-
- printf("changemode: %dbpp rot=%d\n", abs(bpp), bpp < 0);
-
- /* negative bpp means rotated mode */
- rot_cmd[0] = (bpp < 0) ? 6 : 5;
- ret = ioctl(fbdev, _IOW('D', 90, int[2]), rot_cmd);
- if (ret < 0)
- perror("rot ioctl failed");
- memregl[0x4004>>2] = (bpp < 0) ? 0x013f00ef : 0x00ef013f;
- memregl[0x4000>>2] |= 1 << 3;
-
- /* the above ioctl resets LCD timings, so set them here */
- snprintf(buff, sizeof(buff), "POLLUX_LCD_TIMINGS_%s", last_pal_setting ? "PAL" : "NTSC");
- pollux_set_fromenv(buff);
-
- switch (abs(bpp))
- {
- case 8:
- code = 0x443a;
- bytes = 1;
- break;
-
- case 15:
- case 16:
- code = 0x4432;
- bytes = 2;
- break;
-
- default:
- printf("unhandled bpp request: %d\n", abs(bpp));
- return;
- }
+ long long v;
+ int p, m, s;
- memregl[0x405c>>2] = bytes;
- memregl[0x4060>>2] = bytes * (bpp < 0 ? 240 : 320);
+ p = (reg >> 18) & 0x3f;
+ m = (reg >> 8) & 0x3ff;
+ s = reg & 0xff;
- r = memregl[0x4058>>2];
- r = (r & 0xffff) | (code << 16) | 0x10;
- memregl[0x4058>>2] = r;
-}
+ if (p == 0)
+ p = 1;
-static void gp2x_video_setpalette_(int *pal, int len)
-{
- /* pollux palette is 16bpp only.. */
- int i;
- for (i = 0; i < len; i++)
- {
- int c = pal[i];
- c = ((c >> 8) & 0xf800) | ((c >> 5) & 0x07c0) | ((c >> 3) & 0x001f);
- memregl[0x4070>>2] = (i << 24) | c;
- }
+ v = 27000000; // master clock
+ v = v * m / (p << s);
+ return v;
}
-static void gp2x_video_RGB_setscaling_(int ln_offs, int W, int H)
-{
- /* maybe a job for 3d hardware? */
-}
+#define TIMER_BASE3 0x1980
+#define TIMER_REG(x) memregl[(TIMER_BASE3 + x) >> 2]
-static void gp2x_video_wait_vsync_(void)
+static unsigned int gp2x_get_ticks_us_(void)
{
- while (!(memregl[0x308c>>2] & (1 << 10)))
- spend_cycles(128);
- memregl[0x308c>>2] |= 1 << 10;
+ TIMER_REG(0x08) = 0x4b; /* run timer, latch value */
+ return TIMER_REG(0);
}
-/* CPU clock */
-static void gp2x_set_cpuclk_(unsigned int mhz)
+static unsigned int gp2x_get_ticks_ms_(void)
{
- char buff[24];
- snprintf(buff, sizeof(buff), "cpuclk=%u", mhz);
- pollux_set(memregs, buff);
-
- cpuclk_was_changed = 1;
+ /* approximate /= 1000 */
+ unsigned long long v64;
+ v64 = (unsigned long long)gp2x_get_ticks_us_() * 4294968;
+ return v64 >> 32;
}
-/* RAM timings */
-static void set_ram_timings_(void)
+static void timer_cleanup(void)
{
- pollux_set_fromenv("POLLUX_RAM_TIMINGS");
+ TIMER_REG(0x40) = 0x0c; /* be sure clocks are on */
+ TIMER_REG(0x08) = 0x23; /* stop the timer, clear irq in case it's pending */
+ TIMER_REG(0x00) = 0; /* clear counter */
+ TIMER_REG(0x40) = 0; /* clocks off */
+ TIMER_REG(0x44) = 0; /* dividers back to default */
}
-static void unset_ram_timings_(void)
+static void save_multiple_regs(unsigned int *dest, int base, int count)
{
+ const volatile unsigned int *regs = memregl + base / 4;
int i;
- memregs[0x14802>>1] = memtimex_old[0];
- memregs[0x14804>>1] = memtimex_old[1] | 0x8000;
-
- for (i = 0; i < 0x100000; i++)
- if (!(memregs[0x14804>>1] & 0x8000))
- break;
-
- printf("RAM timings reset to startup values.\n");
-}
-
-/* LCD refresh */
-static void set_lcd_custom_rate_(int is_pal)
-{
- /* just remember PAL/NTSC. We always set timings in _changemode_ll() */
- last_pal_setting = is_pal;
-}
-
-static void unset_lcd_custom_rate_(void)
-{
-}
-
-static void set_lcd_gamma_(int g100, int A_SNs_curve)
-{
- /* hm, the LCD possibly can do it (but not POLLUX) */
-}
-
-static int gp2x_read_battery_(void)
-{
- unsigned short magic_val = 0;
-
- if (battdev < 0)
- return -1;
- if (read(battdev, &magic_val, sizeof(magic_val)) != sizeof(magic_val))
- return -1;
- switch (magic_val) {
- default:
- case 1: return 100;
- case 2: return 66;
- case 3: return 40;
- case 4: return 0;
- }
+ for (i = 0; i < count; i++)
+ dest[i] = regs[i];
}
-#define TIMER_BASE3 0x1980
-#define TIMER_REG(x) memregl[(TIMER_BASE3 + x) >> 2]
-
-static unsigned int gp2x_get_ticks_us_(void)
+static void restore_multiple_regs(int base, const unsigned int *src, int count)
{
- TIMER_REG(0x08) = 0x4b; /* run timer, latch value */
- return TIMER_REG(0);
-}
+ volatile unsigned int *regs = memregl + base / 4;
+ int i;
-static unsigned int gp2x_get_ticks_ms_(void)
-{
- /* approximate /= 1000 */
- unsigned long long v64;
- v64 = (unsigned long long)gp2x_get_ticks_us_() * 4294968;
- return v64 >> 32;
+ for (i = 0; i < count; i++)
+ regs[i] = src[i];
}
int pollux_get_real_snd_rate(int req_rate)
return rate;
}
-void pollux_init(void)
-{
- struct fb_fix_screeninfo fbfix;
- int i, ret, rate, timer_div;
-
- memdev = open("/dev/mem", O_RDWR);
- if (memdev == -1) {
- perror("open(/dev/mem) failed");
- exit(1);
- }
-
- memregs = mmap(0, 0x20000, PROT_READ|PROT_WRITE, MAP_SHARED, memdev, 0xc0000000);
- if (memregs == MAP_FAILED) {
- perror("mmap(memregs) failed");
- exit(1);
- }
- memregl = (volatile void *)memregs;
-
- fbdev = open("/dev/fb0", O_RDWR);
- if (fbdev < 0) {
- perror("can't open fbdev");
- exit(1);
- }
-
- ret = ioctl(fbdev, FBIOGET_FSCREENINFO, &fbfix);
- if (ret == -1) {
- perror("ioctl(fbdev) failed");
- exit(1);
- }
-
- printf("framebuffer: \"%s\" @ %08lx\n", fbfix.id, fbfix.smem_start);
- fb_paddr[0] = fbfix.smem_start;
-
- gp2x_screens[0] = mmap(0, 320*240*2*fb_buf_count, PROT_READ|PROT_WRITE,
- MAP_SHARED, memdev, fb_paddr[0]);
- if (gp2x_screens[0] == MAP_FAILED)
- {
- perror("mmap(gp2x_screens) failed");
- exit(1);
- }
- memset(gp2x_screens[0], 0, 320*240*2*fb_buf_count);
-
- printf(" %p -> %08x\n", gp2x_screens[0], fb_paddr[0]);
- for (i = 1; i < fb_buf_count; i++)
- {
- fb_paddr[i] = fb_paddr[i-1] + 320*240*2;
- gp2x_screens[i] = (char *)gp2x_screens[i-1] + 320*240*2;
- printf(" %p -> %08x\n", gp2x_screens[i], fb_paddr[i]);
- }
- fb_work_buf = 0;
- g_screen_ptr = gp2x_screens[0];
-
- battdev = open("/dev/pollux_batt", O_RDONLY);
- if (battdev < 0)
- perror("Warning: could't open pollux_batt");
-
- /* find what PLL1 runs at, for the timer */
- rate = decode_pll(memregl[0xf008>>2]);
- printf("PLL1 @ %dHz\n", rate);
-
- /* setup timer */
- timer_div = (rate + 500000) / 1000000;
- if (1 <= timer_div && timer_div <= 256) {
- timer_drift = (rate - (timer_div * 1000000)) / timer_div;
-
- if (TIMER_REG(0x08) & 8) {
- fprintf(stderr, "warning: timer in use, overriding!\n");
- timer_cleanup();
- }
-
- TIMER_REG(0x44) = ((timer_div - 1) << 4) | 2; /* using PLL1, divide by it's rate */
- TIMER_REG(0x40) = 0x0c; /* clocks on */
- TIMER_REG(0x08) = 0x6b; /* run timer, clear irq, latch value */
-
- gp2x_get_ticks_ms = gp2x_get_ticks_ms_;
- gp2x_get_ticks_us = gp2x_get_ticks_us_;
- }
- else {
- fprintf(stderr, "warning: could not make use of timer\n");
-
- // those functions are actually not good at all on Wiz kernel
- gp2x_get_ticks_ms = plat_get_ticks_ms_good;
- gp2x_get_ticks_us = plat_get_ticks_us_good;
- }
-
- pllsetreg0_old = memregl[0xf004>>2];
- memtimex_old[0] = memregs[0x14802>>1];
- memtimex_old[1] = memregs[0x14804>>1];
-
- gp2x_video_flip = gp2x_video_flip_;
- gp2x_video_flip2 = gp2x_video_flip2_;
- gp2x_video_changemode_ll = gp2x_video_changemode_ll_;
- gp2x_video_setpalette = gp2x_video_setpalette_;
- gp2x_video_RGB_setscaling = gp2x_video_RGB_setscaling_;
- gp2x_video_wait_vsync = gp2x_video_wait_vsync_;
-
- /* some firmwares have sys clk on PLL0, we can't adjust CPU clock
- * by reprogramming the PLL0 then, as it overclocks system bus */
- if ((memregl[0xf000>>2] & 0x03000030) == 0x01000000)
- gp2x_set_cpuclk = gp2x_set_cpuclk_;
- else {
- fprintf(stderr, "unexpected PLL config (%08x), overclocking disabled\n",
- memregl[0xf000>>2]);
- gp2x_set_cpuclk = NULL;
- }
-
- set_lcd_custom_rate = set_lcd_custom_rate_;
- unset_lcd_custom_rate = unset_lcd_custom_rate_;
- set_lcd_gamma = set_lcd_gamma_;
-
- set_ram_timings = set_ram_timings_;
- unset_ram_timings = unset_ram_timings_;
- gp2x_read_battery = gp2x_read_battery_;
-}
-
-void pollux_finish(void)
-{
- /* switch to default fb mem, turn portrait off */
- memregl[0x406C>>2] = fb_paddr[0];
- memregl[0x4058>>2] |= 0x10;
- close(fbdev);
-
- gp2x_video_changemode_ll_(16);
- unset_ram_timings_();
- if (cpuclk_was_changed) {
- memregl[0xf004>>2] = pllsetreg0_old;
- memregl[0xf07c>>2] |= 0x8000;
- }
- timer_cleanup();
-
- munmap((void *)memregs, 0x20000);
- close(memdev);
- if (battdev >= 0)
- close(battdev);
-}
-#endif
-
-/* note: both PLLs are programmed the same way,
- * the databook incorrectly states that PLL1 differs */
-static int decode_pll(unsigned int reg)
-{
- long long v;
- int p, m, s;
-
- p = (reg >> 18) & 0x3f;
- m = (reg >> 8) & 0x3ff;
- s = reg & 0xff;
-
- if (p == 0)
- p = 1;
-
- v = 27000000; // master clock
- v = v * m / (p << s);
- return v;
-}
-
-#define TIMER_BASE3 0x1980
-#define TIMER_REG(x) memregl[(TIMER_BASE3 + x) >> 2]
-
-static void timer_cleanup(void)
-{
- TIMER_REG(0x40) = 0x0c; /* be sure clocks are on */
- TIMER_REG(0x08) = 0x23; /* stop the timer, clear irq in case it's pending */
- TIMER_REG(0x00) = 0; /* clear counter */
- TIMER_REG(0x40) = 0; /* clocks off */
- TIMER_REG(0x44) = 0; /* dividers back to default */
-}
-
-static void save_multiple_regs(unsigned int *dest, int base, int count)
-{
- const volatile unsigned int *regs = memregl + base / 4;
- int i;
-
- for (i = 0; i < count; i++)
- dest[i] = regs[i];
-}
-
-static void restore_multiple_regs(int base, const unsigned int *src, int count)
-{
- volatile unsigned int *regs = memregl + base / 4;
- int i;
-
- for (i = 0; i < count; i++)
- regs[i] = src[i];
-}
-
/* newer API */
static int pollux_cpu_clock_get(void)
{
}
}
-static int step_volume(int is_up)
+static int step_volume(int *volume, int diff)
{
- static int volume = 50;
int ret, val;
if (mixerdev < 0)
return -1;
- if (is_up) {
- volume += 5;
- if (volume > 255) volume = 255;
- }
- else {
- volume -= 5;
- if (volume < 0) volume = 0;
- }
- val = volume;
+ *volume += diff;
+ if (*volume > 255)
+ *volume = 255;
+ else if (*volume < 0)
+ *volume = 0;
+
+ val = *volume;
val |= val << 8;
ret = ioctl(mixerdev, SOUND_MIXER_WRITE_PCM, &val);
- if (ret == -1)
+ if (ret == -1) {
perror("WRITE_PCM");
+ return ret;
+ }
- return ret;
+ return 0;
}
-struct plat_target plat_target = {
- pollux_cpu_clock_get,
- pollux_cpu_clock_set,
- pollux_bat_capacity_get,
-
- .step_volume = step_volume,
-};
-
-int plat_target_init(void)
+void pollux_init(void)
{
int rate, timer_div, timer_div2;
- FILE *f;
memdev = open("/dev/mem", O_RDWR);
if (memdev == -1) {
fprintf(stderr, "warning: timer in use, overriding!\n");
timer_cleanup();
}
- if (timer_rate != 1000000)
- fprintf(stderr, "warning: timer drift %d us\n", timer_rate - 1000000);
+ timer_drift = timer_rate - 1000000;
+ if (timer_drift != 0)
+ fprintf(stderr, "warning: timer drift %d us\n",
+ timer_drift);
timer_div2 = (timer_div2 + 3) & 3;
TIMER_REG(0x44) = ((timer_div - 1) << 4) | 2; /* using PLL1 */
TIMER_REG(0x40) = 0x0c; /* clocks on */
TIMER_REG(0x08) = 0x68 | timer_div2; /* run timer, clear irq, latch value */
}
- else
+ else {
fprintf(stderr, "warning: could not make use of timer\n");
+ // those functions are actually not good at all on Wiz kernel
+ gp2x_get_ticks_ms = plat_get_ticks_ms_good;
+ gp2x_get_ticks_us = plat_get_ticks_us_good;
+ }
+
battdev = open("/dev/pollux_batt", O_RDONLY);
if (battdev < 0)
perror("Warning: could't open pollux_batt");
- f = fopen("/dev/accel", "rb");
- if (f) {
- printf("detected Caanoo\n");
- gp2x_dev_id = GP2X_DEV_CAANOO;
- fclose(f);
- }
- else {
- printf("detected Wiz\n");
- gp2x_dev_id = GP2X_DEV_WIZ;
- }
-
mixerdev = open("/dev/mixer", O_RDWR);
if (mixerdev == -1)
perror("open(/dev/mixer)");
- return 0;
-}
+ plat_target.cpu_clock_get = pollux_cpu_clock_get;
+ plat_target.cpu_clock_set = pollux_cpu_clock_set;
+ plat_target.bat_capacity_get = pollux_bat_capacity_get;
+ plat_target.step_volume = step_volume;
-/* to be called after in_probe */
-void plat_target_setup_input(void)
-{
+ gp2x_get_ticks_ms = gp2x_get_ticks_ms_;
+ gp2x_get_ticks_us = gp2x_get_ticks_us_;
}
-void plat_target_finish(void)
+void pollux_finish(void)
{
timer_cleanup();
notaz.gp2x.de / libpicofe.git / blobdiff