make hcnt code friendly with split timeslices
[picodrive.git] / pico / pico_cmn.c
1 /*
2  * common code for base/cd/32x
3  * (C) notaz, 2007-2009,2013
4  *
5  * This work is licensed under the terms of MAME license.
6  * See COPYING file in the top-level directory.
7  */
8
9 #define CYCLES_M68K_LINE     488 // suitable for both PAL/NTSC
10 #define CYCLES_M68K_VINT_LAG  68
11 #define CYCLES_M68K_ASD      148
12
13 // pad delay (for 6 button pads)
14 #define PAD_DELAY() { \
15   if(Pico.m.padDelay[0]++ > 25) Pico.m.padTHPhase[0]=0; \
16   if(Pico.m.padDelay[1]++ > 25) Pico.m.padTHPhase[1]=0; \
17 }
18
19 // CPUS_RUN
20 #ifndef CPUS_RUN
21 #define CPUS_RUN(m68k_cycles) \
22   SekRunM68k(m68k_cycles)
23 #endif
24
25 // sync m68k to SekCycleAim
26 static void SekSyncM68k(void)
27 {
28   int cyc_do;
29   pprof_start(m68k);
30   pevt_log_m68k_o(EVT_RUN_START);
31
32   while ((cyc_do = SekCycleAim - SekCycleCnt) > 0) {
33     SekCycleCnt += cyc_do;
34
35 #if defined(EMU_C68K)
36     PicoCpuCM68k.cycles = cyc_do;
37     CycloneRun(&PicoCpuCM68k);
38     SekCycleCnt -= PicoCpuCM68k.cycles;
39 #elif defined(EMU_M68K)
40     SekCycleCnt += m68k_execute(cyc_do) - cyc_do;
41 #elif defined(EMU_F68K)
42     SekCycleCnt += fm68k_emulate(cyc_do, 0, 0) - cyc_do;
43 #endif
44   }
45
46   SekCyclesLeft = 0;
47
48   SekTrace(0);
49   pevt_log_m68k_o(EVT_RUN_END);
50   pprof_end(m68k);
51 }
52
53 static inline void SekRunM68k(int cyc)
54 {
55   SekCycleAim += cyc;
56   SekSyncM68k();
57 }
58
59 static int PicoFrameHints(void)
60 {
61   struct PicoVideo *pv=&Pico.video;
62   int lines, y, lines_vis = 224, line_sample, skip, vcnt_wrap;
63   unsigned int cycles;
64   int hint; // Hint counter
65
66   pevt_log_m68k_o(EVT_FRAME_START);
67   pv->v_counter = Pico.m.scanline = 0;
68
69   if ((PicoOpt&POPT_ALT_RENDERER) && !PicoSkipFrame && (pv->reg[1]&0x40)) { // fast rend., display enabled
70     // draw a frame just after vblank in alternative render mode
71     // yes, this will cause 1 frame lag, but this is inaccurate mode anyway.
72     PicoFrameFull();
73 #ifdef DRAW_FINISH_FUNC
74     DRAW_FINISH_FUNC();
75 #endif
76     skip = 1;
77   }
78   else skip=PicoSkipFrame;
79
80   if (Pico.m.pal) {
81     line_sample = 68;
82     if (pv->reg[1]&8) lines_vis = 240;
83   } else {
84     line_sample = 93;
85   }
86
87   z80_resetCycles();
88   PsndDacLine = 0;
89   emustatus &= ~1;
90
91   pv->status&=~0x88; // clear V-Int, come out of vblank
92
93   hint=pv->reg[10]; // Load H-Int counter
94   //dprintf("-hint: %i", hint);
95
96   // This is to make active scan longer (needed for Double Dragon 2, mainly)
97   CPUS_RUN(CYCLES_M68K_ASD);
98
99   for (y = 0; y < lines_vis; y++)
100   {
101     pv->v_counter = Pico.m.scanline = y;
102     if ((pv->reg[12]&6) == 6) { // interlace mode 2
103       pv->v_counter <<= 1;
104       pv->v_counter |= pv->v_counter >> 8;
105       pv->v_counter &= 0xff;
106     }
107
108     // VDP FIFO
109     pv->lwrite_cnt -= 12;
110     if (pv->lwrite_cnt <= 0) {
111       pv->lwrite_cnt=0;
112       Pico.video.status|=0x200;
113     }
114
115     PAD_DELAY();
116
117     // H-Interrupts:
118     if (--hint < 0) // y <= lines_vis: Comix Zone, Golden Axe
119     {
120       hint=pv->reg[10]; // Reload H-Int counter
121       pv->pending_ints|=0x10;
122       if (pv->reg[0]&0x10) {
123         elprintf(EL_INTS, "hint: @ %06x [%i]", SekPc, SekCyclesDone());
124         SekInterrupt(4);
125       }
126     }
127
128     // decide if we draw this line
129     if (!skip && (PicoOpt & POPT_ALT_RENDERER))
130     {
131       // find the right moment for frame renderer, when display is no longer blanked
132       if ((pv->reg[1]&0x40) || y > 100) {
133         PicoFrameFull();
134 #ifdef DRAW_FINISH_FUNC
135         DRAW_FINISH_FUNC();
136 #endif
137         skip = 1;
138       }
139     }
140
141     // get samples from sound chips
142     if ((y == 224 || y == line_sample) && PsndOut)
143     {
144       cycles = SekCyclesDone();
145
146       if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80))
147         PicoSyncZ80(cycles);
148       if (ym2612.dacen && PsndDacLine <= y)
149         PsndDoDAC(y);
150 #ifdef PICO_CD
151       pcd_sync_s68k(cycles, 0);
152 #endif
153 #ifdef PICO_32X
154       p32x_sync_sh2s(cycles);
155 #endif
156       PsndGetSamples(y);
157     }
158
159     // Run scanline:
160     line_base_cycles = SekCyclesDone();
161     if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA());
162     CPUS_RUN(CYCLES_M68K_LINE);
163
164     if (PicoLineHook) PicoLineHook();
165     pevt_log_m68k_o(EVT_NEXT_LINE);
166   }
167
168   if (!skip)
169   {
170     if (DrawScanline < y)
171       PicoDrawSync(y - 1, 0);
172 #ifdef DRAW_FINISH_FUNC
173     DRAW_FINISH_FUNC();
174 #endif
175   }
176
177   // V-int line (224 or 240)
178   Pico.m.scanline = y;
179   pv->v_counter = 0xe0; // bad for 240 mode
180   if ((pv->reg[12]&6) == 6) pv->v_counter = 0xc1;
181
182   // VDP FIFO
183   pv->lwrite_cnt=0;
184   Pico.video.status|=0x200;
185
186   memcpy(PicoPadInt, PicoPad, sizeof(PicoPadInt));
187   PAD_DELAY();
188
189   // Last H-Int:
190   if (--hint < 0)
191   {
192     hint=pv->reg[10]; // Reload H-Int counter
193     pv->pending_ints|=0x10;
194     //printf("rhint: %i @ %06x [%i|%i]\n", hint, SekPc, y, SekCyclesDone());
195     if (pv->reg[0]&0x10) SekInterrupt(4);
196   }
197
198   pv->status|=0x08; // go into vblank
199   pv->pending_ints|=0x20;
200
201   // the following SekRun is there for several reasons:
202   // there must be a delay after vblank bit is set and irq is asserted (Mazin Saga)
203   // also delay between F bit (bit 7) is set in SR and IRQ happens (Ex-Mutants)
204   // also delay between last H-int and V-int (Golden Axe 3)
205   line_base_cycles = SekCyclesDone();
206   CPUS_RUN(CYCLES_M68K_VINT_LAG);
207
208   if (pv->reg[1]&0x20) {
209     elprintf(EL_INTS, "vint: @ %06x [%i]", SekPc, SekCyclesDone());
210     SekInterrupt(6);
211   }
212
213   cycles = SekCyclesDone();
214   if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80)) {
215     PicoSyncZ80(cycles);
216     elprintf(EL_INTS, "zint");
217     z80_int();
218   }
219
220 #ifdef PICO_CD
221   pcd_sync_s68k(cycles, 0);
222 #endif
223 #ifdef PICO_32X
224   p32x_sync_sh2s(cycles);
225   p32x_start_blank();
226 #endif
227
228   // get samples from sound chips
229   if (y == 224 && PsndOut)
230   {
231     if (ym2612.dacen && PsndDacLine <= y)
232       PsndDoDAC(y);
233     PsndGetSamples(y);
234   }
235
236   // Run scanline:
237   if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA());
238   CPUS_RUN(CYCLES_M68K_LINE - CYCLES_M68K_VINT_LAG - CYCLES_M68K_ASD);
239
240   if (PicoLineHook) PicoLineHook();
241   pevt_log_m68k_o(EVT_NEXT_LINE);
242
243   lines = scanlines_total;
244   vcnt_wrap = Pico.m.pal ? 0x103 : 0xEB; // based on Gens, TODO: verify
245
246   for (y++; y < lines; y++)
247   {
248     pv->v_counter = Pico.m.scanline = y;
249     if (y >= vcnt_wrap)
250       pv->v_counter -= Pico.m.pal ? 56 : 6;
251     if ((pv->reg[12]&6) == 6)
252       pv->v_counter = (pv->v_counter << 1) | 1;
253     pv->v_counter &= 0xff;
254
255     PAD_DELAY();
256
257     // Run scanline:
258     line_base_cycles = SekCyclesDone();
259     if (Pico.m.dma_xfers) SekCyclesBurn(CheckDMA());
260     CPUS_RUN(CYCLES_M68K_LINE);
261
262     if (PicoLineHook) PicoLineHook();
263     pevt_log_m68k_o(EVT_NEXT_LINE);
264   }
265
266   // sync cpus
267   cycles = SekCyclesDone();
268   if (Pico.m.z80Run && !Pico.m.z80_reset && (PicoOpt&POPT_EN_Z80))
269     PicoSyncZ80(cycles);
270   if (PsndOut && ym2612.dacen && PsndDacLine <= lines-1)
271     PsndDoDAC(lines-1);
272
273 #ifdef PICO_CD
274   pcd_sync_s68k(cycles, 0);
275 #endif
276 #ifdef PICO_32X
277   p32x_sync_sh2s(cycles);
278 #endif
279   timers_cycle();
280
281   return 0;
282 }
283
284 #undef PAD_DELAY
285 #undef CPUS_RUN
286
287 // vim:shiftwidth=2:ts=2:expandtab